No video :(

Inner CV Joint Disassembly & Assembling - Step by Step Guide | Tom's Garage

Подписаться 274

Просмотров 29 тыс.

50% 1

Hey Guys! Today We are going to disassemble an inner (transmission side) CV Joint.
You will know:
- How to recognise a bad inner cv joint,
- How you can disassemble an inner cv joint,
- How to replace the boot,
- How to assemble an inner cv joint.
Driveshaft Removal:
• How to Remove a Drives...
Outer CV Joint disassembly and replacing:
• How to Replace an Oute...
#howto #disassembly #cvjoint
WARNING!
If you are not familiar with car repairing and with car parts, do not start this process. Or if you disassembling your car without a professional, do it with your own responsibility!

Опубликовано:

20 апр 2019

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 11

@fourwheels_care Месяц назад

You made it easy for me I have to face the dragon Now

@fourwheels_care Месяц назад

Nice one Im stressed I need to bay cv joints for my Golf 6 gti and do them myself I have trip of about 600km to take so it need to be fixed

@paullangley2940 3 года назад

thank you for this excellent and very helpful video. My inner CV is stuck in the trans. wont move. so now, due to your video, seeing as the inner CV is fine and just needs a clean and new grease, I understand how can use the old inner cup with the new axle I got minus the new inner cup. My problem is solved. So you have saved me from a lot more work. Thank you heaps.

@garyraney7760 5 месяцев назад

Using that brake cleaner on those sealed roller bearings probably seeped into them and softened the grease or made it contaminated.Will probably cause premature bearing wear now ?

@djredx2462 2 месяца назад

1 of my bearings damaged but how you bearings come off so easy........?

@mrbear691 4 месяца назад

How much grease was in that packet?

@andymcnally5277 2 года назад

Hi changing the coil spring on my Audi Q3 DSG nearside the axle popped out of the inner cv housing I had to cut the boot banding and rebuild the inner cv in position against the gearbox, on putting the Gator back on I couldn’t get any banding on due to space constraints The online banding tools for the Gators won’t access the space to secure a new banding Is there another type of Banding or tool that will fit the tight space to allow me to tighten it up? Thank you Andrew