INNOVV K2 (SCREW BY SCREW) INSTALLATION BMW R1250GS HP

Подписаться 55 тыс.

Просмотров 37 тыс.

50% 1

Seeing as Innovv recommend me on their list of K2 installers, I thought I'd make an #INNOVV #K2 installation exclusively for the BMW #R1250GS. Video includes full bike strip down, Full K2 Installation and set up and bike put back together again.
BUY THE INNOVV K2 FROM MY OWN PERSONAL STOCK. I keep a good supply at all times and ship worldwide. Click here to see how much. www.abikething...
Add it to your basket and the website will calculate the shipping based on your delivery destination.
Check out the SKY LIFT here too. www.abikething...
SKY LIFT videos • WHY SHOULD YOU BUY YOU... and • SKYLIFT BIKE WASH BMW ... and • MOTORCYCLE LIFT BMW R1...
I use the following equipment to record and edit my VLOGs:-
Sony a6400
Canon EOS 700D
IphoneXS Max
Ipad Pro
Drift GhostS
Go Pro Hero 7 Black
Insta360 ONE X www.abikething...
Rode Lavalier Microphone
Purple Panda Lavalier Microphone
Rode Wireless GO
My current motorcycles are:-
BMW R1200GS Adventure Rallye (2018)
For any additional enquiries please send a PM, e-mail me via steve@abikething.com or leave a comment below.

Опубликовано:

6 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 68

@ABIKETHING 4 года назад

Double DRAT! I didn’t show where the gps is located. It’s right at the back behind the rear light.

@TFF801 4 года назад

Hi Steve, Any chance of a photo showing the GPS and is it not affected by a top box. Great video and very concise. I purchased one at the London Bike show but haven't fitted it yet to my 1200GS but your video makes it far easier.

@SSLSanDiego Месяц назад

Finally someone actually show good Yellow wire connection. Thank you!

@DaeSimpson Год назад

The reason the -ve comes off first and goes on last is simple. With the -ve off, if your screwdriver accidentally touches the frame when undoing/tightening the +ve there's no path back to the -ve terminal of the battery through the frame, so there's no short circuit. If -ve is still connected and you accidentally make a connection to the frame when touching the +ve terminal then you'll get a direct short and bad things happen. Forget about "putting things on" and "taking things off" and just think "if I'm touching the +ve terminal then the -ve should already be disconnected"

@TonVerkleijT3 8 месяцев назад

Please forgive me, but as a positive remark you give me the impression to be the 'Edd China' for motorbikes, same skills, same intonation as well. Very clear and skilled video.

@syumassh 3 года назад

Gotta get rid of those sound effects, i nearly spilled my coffee.

@johnshipton6491 4 года назад

I bought kit from Steve did my own installation. I installed the GPS in front of fuel filler cap underneath plastic tank cover. No problems with it picking up a signal. Great video Steve

@suburbanhobbyist2752 3 года назад

Did you have an issue with vibration in the front camera? I installed like Steve did in the video but video shows too much vibration.

@suburbanhobbyist2752 4 года назад

20:05 I'm glad you left that in....that was funnier than it should have been!

@petersydney5895 4 года назад

I don't care what you charge. You're worth every penny!

@paulflint9849 3 года назад

Fitted my cameras yesterday on my new GS which I haven't even ridden yet so I was very apprehensive of taking my bike apart. With my laptop in the garage and following your step by step guide I managed a very neat installation. Thank you very much. I just need to find the best place for the gps.

@ABIKETHING 3 года назад

Thanks for sharing Paul. GPS at the back under the tray.

@johntyler3636 4 года назад

Just used your video help to me install the K2 on my 2019 r1250gs, thanks so much your explanation/video was very helpful! I finished up yesterday mounting the cameras in the positions you used in the video (except in the front I did mount to the side so that I can get the wind screen in the full down position). Last night I was laying in bed thinking about the installation when I thought "I hope the rear camera doesn't interfere with my Vario side bag mounting!". Just went out and mounted the side bag and it is like the camera was made to fit with the bag mounted! Fits snugly between the bag and the bike making the camera even less obvious. Thanks again for your good work!

@garrydeadman6980 4 года назад

Steve, I watched your video but you didn't show where you mounted the GPS aerial.

@ABIKETHING 4 года назад

Check the pinned comment at top. My bad

@stuartmcgifford3286 4 года назад

The k2 is a great unit. I have one fitted to my s1000xr which is getting traded in for a gsa. Need to remove it and transfer to the new beast.

@carlton683 3 года назад

Great job you are very methodical 👍

@graham3777 3 года назад

Thanks for posting such a comprehensive guide, it's very much appreciated. I'd also appreciate your advice on whether you can see any problems with powering the unit from the accessory socket on my R1250r. The power socket on my bike is below the seat and I have no need to use it for anything else, as I have an adapter on the bmw satnav base which gives me 2 usb outlets for my phone etc. What I propose to do is relocate the power socket from the side panel to underneath the seat with my Powerlet usb adapter plugged in and micro usb cable to provide power to the dvr. The socket is only powered when the bike is on, so I'm hoping this will eliminate the need for the DC converter/transformer. I like the idea of not having more connections to the battery and keeping more of the hardware and wiring under the pillion seat.

@arifbobat5203 2 года назад

Brilliant video. Thanks for clearly demonstrating and explaining how to install. Especially the switched live fitting as that saves me money installing a camSmart system. Instead of a Posi-tap like you’ve shown, what about a fuse tap with the 7.5A fuse instead?

@ferhatdaglioglu3352 6 месяцев назад

Hi, I installed the Innovv K2. Red cable to the plus and the black to the negative. The yellow cable also connected to the correct location. When I turn off the bike the DVR turns off after 30 seconds. Only the DC converter light remains on. Is this how it should be? and does this have consequences my battery? Thanks for making these helpful videos!

@juanknoppel3246 3 года назад

I love two rijd to your shop end si My 2021 bmw Adventure trippel blak 😄🙏🏽

@busht3259 4 года назад

Hi Steve great vid, having fitted one of these systems to my GSA Rallye TE, Did I miss something, I didn’t see the location you fitted the GPS module. Thanks Bush

@ABIKETHING 4 года назад

Did I not show this? It’s at the back right behind the rear light. I’ll pin this. So many hours of editing and I left it out. 🙄

@busht3259 4 года назад

Thanks 👍👍

@thatguy7085 2 года назад

Thank you

@Spiderflash22 Год назад

Steve, can you tell me what size AWG posi tap connector I need for the yellow wire to the switched live? Many thanks

@paulmorris3613 3 года назад

A first-class installation video and well talked through installation, Thank you for that.

@stephenh7424 3 года назад

Another great install video - Steve, your a wealth of knowledge and skills. I completed the install without issue

@Jason_Shave 3 года назад

Might want to test it before putting it all back together again! ;-)

@drewo1494 2 года назад

Great step by step

@suburbanhobbyist2752 3 года назад

Anyone else have issues with vibration on the front camera when installing where Steve did? I have a R1250GS and I'm going to have to move the camera. Unfortunately, I installed it when the bike was disassembled and ran the camera wire with all the other wires from the lights. I even ran everything under the tank! The camera body is too wide to fit in the gap between the windshield and the headlight so looks like I'm disassembling everything just to free up the connection part of the wire so I can remove it from it's current location.

@ABIKETHING 3 года назад

I feel your pain here. I nice mod for innovv would be to make a connection point both ends like denali do for lights. Let’s see what innovv do on future models which are under development

@suburbanhobbyist2752 3 года назад

@@ABIKETHING Exactly. That is the first thing I looked at thinking I will just detach the camera from the wire in some way. No big deal, I'm getting good at taking the bike apart.

@bulletcom 4 года назад

What's the coiled up cable under the back seat for? Some sort of helmet locking thing?

@ABIKETHING 4 года назад

Yes. A device where you can lock two helmets to the bike.

@bulletcom 4 года назад

@@ABIKETHING Thanks Steve.

@tl3417 2 года назад

Any ideas why the k3 green camera light is flashing on the unit you installed?

@stuarthull5706 3 года назад

Hi Great install can you tell me the model of Milwaukee your using as can’t find one like that with the hex drive?

@TheOutdoorFun 4 года назад

I just spoke to 'North Oxford Motorrad' who is one of the Innovv's authorised installers and they said they stopped installing Innovvs because of technical issues they faced. I am not sure about it now.

@ABIKETHING 4 года назад

What technical issues? I’ll ask innovv what’s this all about and come back to you.

@TheOutdoorFun 4 года назад

@@ABIKETHING Best to call North Oxford BMW Motorrad parts dept as well.

@ABIKETHING 4 года назад

TheOutdoorFun good call 👍

@ABIKETHING 4 года назад

Ok, spoken to Innovv and from I'm hearing there's no point in asking North Oxford Garage. They only ever installed a handful so maybe it's something they're doing wrong their end and they didn't ask for any support from Innovv. I get techie issues every day from customers and I try to give them the solution but it needs to begin with the customer asking me. I know for a fact my local dealer fit them (Wollaston) and Wollaston own North Oxford garage. I'm also aware of other BMW motorrad dealers who supply and fit them too. Obviously none of them do as good as job as me 😉. But maybe draw your own conclusion after checking out Trust Pilot reviews uk.trustpilot.com/review/www.innovv.co.uk

@TheOutdoorFun 4 года назад

@@ABIKETHING Thanks good to know. Let me know if you know of a authorised installer near Hampshire.

@SP-ek2qz 3 года назад

Hi Just wondering if you have done a fit to a R1250RT? Wondering where to pick up a switched live, some suggest the front power socket, but as I use that for my Optimate that may be a problem? Many Thanks

@ABIKETHING 3 года назад

It’s identical to a Gs. Under seat. Fuse plug. Red and blue wire going to 7.5amp fuse.

@SP-ek2qz 3 года назад

@@ABIKETHING Thanks for taking the time to answer, much appreciated. I'll have a look when the new bike arrives hopefully in the next few weeks :-) I'm not very 'techie' but hopefully should manage. Keep Safe

@jananne1927 4 года назад

Hi, great video ! Where can I find the helpfull tool you used in this vid to remove the little plastic pin ? Thx. Greetings from Belgium

@ABIKETHING 4 года назад

Jan Anné I use amazon for everything . You’re looking for a plastic rivet removing tool or kit. This is what I have KIMISS 3Pcs Door Trim Rivets... www.amazon.co.uk/dp/B07J2K66CG?ref=ppx_pop_mob_ap_share

@bjelliott2887 3 года назад

What do you think of the new K3 and K5 vs the K2?

@SsiolisP 3 года назад

Hey Steve, I was wondering. Would it be possible to install the rear facing camera somewhere above the dashboard, behind the windscreen (facing to the rear obviously)? From that front position and given that the INNOV has a wide field of view, would it (rear camera) be able to record the rider as well as what is coming up from behind him? When used as evidence I suppose it would benefit the rider to actually show what he/she was doing if hit from behind, plus the benefit of the camera recording the entire bike if tampered with when parked. Your thoughts?

@ABIKETHING 3 года назад

Wide field sure but the rider is still going to block some serious space. Makes for an interesting 3 cam system though. I’ll feed this back

@EDP1 3 года назад

great vid.what phone are you using?

@SteveSahin 4 года назад

Bro can you tell me about that mic 🎤 you are using! Looks and sounds cool. Link or something thank you 🙏

@ABIKETHING 4 года назад

Sure thing! Bro 👍. It’s a Rode wireless Go. Just google it, or even better.....Amazon it

@SteveSahin 4 года назад

A BIKE THING thanks mate. I’m new on making RU-vid videos. Preparing equipment now.

@garyallmond6535 4 года назад

@@ABIKETHING So, you use the Rode Wireless Go to replace/override the default internal mic on the Innovv K2? Other videos I have seen with the K2 are fantastic, except that you only hear the exhaust. I want to be able to provide a commentary at times, pointing out specific things or to record my reaction to events as they happen instead of trying to remember and do a voice over.

@lelisortiz8557 3 года назад

Great video, it helped a lot. Gracias!!!

@richardrich3498 2 года назад

Not Sure why anyone would want a camera fitted to there bike? Why on earth would you want the footage downloaded after a accident by the Police, Showing you doing 130mph down the local Bypass? Speedos are blurred on here because err your travelling at the correct speed right! each to there own and all that! Doubt it would still be working after a UK winter anyways

@thatguy7085 2 года назад

I would pay $100 for someone else to do this.

@battsonbikes1919 4 года назад

Have you ever thought that doing these videos are sort of doing yourself out of money ?

@ABIKETHING 4 года назад

Batts on Bikes not at all. I install a couple a week for folk who live within a 50 mile radius. I sell more online to people who use my videos so they can do it themselves. Worldwide audience.

@battsonbikes1919 4 года назад

@@ABIKETHING Good point, never thought of it that way...

@suburbanhobbyist2752 3 года назад

@@battsonbikes1919 For instance, I bought a full set up from Steve... D4, S4 and D7 lights, the Innovv K2 and the mounts needed to install it all. I live in California! I bought them from him because I felt like his videos gave me a lot of value and I owed him the business.