Install Altaros regulator to Diana Stormrider 

Well upgraded complete, testing tomorrow.

Great video !!!

Can't wait to put one in my Diana Stormrider Gen I and maybe later put one in my Diana Stormrider Gen II

Tested it today. Oh my god !!!!!!! say no more.

Does anyone know the exact outside diameter of the moderator/suppressor on the end of the barrel?

Would this work with the diana bandit/ Artemis PP800. It seems to be exactly the same gun. Just different branding. Thank you!

Very good, congratulations, like and +1 subscribe!

Was the port replaced for one with a larger diameter hole for more air ? If so, the port on the air tube & the barrel need to be larger as well.

can you do a guide for the Diana K98 PCP?

great video. but the firing pin lever is not original. where can i find it?

You indicate that a new transfer port comes with the regulator - when did that start? I ordered one and installed one in a Diana Stormrider that I have yet to shoot across a chronograph. Have a air pressure level indicated on the rifle that makes me believe the setting that I adjusted to is too low despite several adjustments to increase the setting / adjustment.

Does the Transfer Port you include with the Regulator increase muzzle velocity (FPS) ? Would drilling the existing one do the same thing, for someone not buying your regulator ? And what is this "outlet pressure can be increased with a side screw" ? Does this increase FPS also ? Thanks for any help, I'm new to PCP airguns... I just bought a StormRider .22cal, but it's only 495 FPS... I want 800-900.

Serve no cilindro de alumínio flashpup wood?

I think the fill tube/gauge off a diana bandit will work in the stormrider . Then you will have a fill pressure gauge too .

i turned the screw too much. how can i reset the regulator setting....i didnt think its possible to turn this thing in way too much... -.-

Do you make regulators for the Sam Yang Dragon Claw models of airguns perhaps?

How do I know how much to fill the airr ifle now when my gauge does not work anymore? What happens if the pump's gauge doesnt show correct pressure?

how many shot increased ? and FPS ?

I been using these regulators now since August 2019 - had it down to ~60-65bar according to the pressure gauge in front of the regulator. The regulator kept this setting till last weekend. I first noticed a shift of impact by about 1Mil up on the field and the loud report, then checked the system pressure and it must crept up to 100-110bar. Now I'm wondering what went south on the reg without taking everything apart a million times. Is their a video that shows how the do this particular Altaros regs?

How much regulator?? Price?

hiya, i was wondering if thi s would make any difference in the uk version of the gun that is limited to 12 foot pounds.

I just installed it in my Stormrider and set the regulator to 125 bar - but the gauge on my rifle shows only around 80-90 bar. What may be wrong? 😬

How many short with regulator? . 22cal

would this work with the smk pr900w ? i believe the rifle is exactly the same with the only difference being the power is 11.8 ftlb just under the legal limit for the united kingdom

But the valve transfer port Is it included in the purchase? what size was installed in the video? I have the diana stormrider 7,5j... what size should the transfer port be?

Where we can buy the regulator?

Why do I need to replace the o ring?

How is that the regulator breathing?

Is it enough to replace only the transferport to get more joule?

Hi my friend I want to know altaros air pressure gauge thread measurements

Do you have shipping to the US?

Does that little air port come with the regulator?!?

Mám Artemis PR900W, je to skoro to samé jako Diana Stormrider. V ráži 4,5 mm. Naměřil jsem u ní úsťovou rychlost kolem 235 m/s při tlaku 200 bar a 175 m/s při 100 barech. To je rozdíl 60 m/s! Pokud bych použil váš regulátor a nechal na něm nastavený výstupní tlak 100 bar, tak bez výměny transferportu by byla úsťová rychlost kolem těch 175 m/s, jestli jsem to správně pochopil. A tlakoměr na zbrani by ukazoval stále regulovaný tlak 100 bar, dokud by tlak v kartuši neklesl pod tuto hodnotu, je to tak? Nevíte náhodou jaké úsťové rychlosti a energie střely ráže 4,5 by se s touto vzduchovkou dalo dosáhnout při použití tuningového transferportu a tuningové pružiny při nastavení regulátoru na 100 barů?

Diana stor.rider instal artemis