Install FL L43 Door poppers on the C10 

I appreciate that. I try to make sure if I can do it everyone watching can do it

Thanks loneranger5349

Thanks

Appreciate it Jungle City and I hope it helped you

I’m happy the video helped you.

Thanks Jay. I seat on the door poppers for a long time before I put them on because I was scared to do it.

@@bonezshakergarage much respect you over came that lil obstacle and you triumphed over it .. good job , I know there’s a lot of people feel the same way hence why they pay someone to do it..

@@jaybee1158 thanks for watching.

Maybe something wrong with the receiver.

I subscribed

I am in the same boat, everything wired up but my plunger won’t pop

Bro when you get here I will let you see where I put them

Great work

Yep you got it bro. When we going to see the motor go in?

@@bonezshakergarage soon I hope we got rain today but I stayed in and did some dash gauges wiring

@@BigRichEHhthang100 well I’m watching all videos anyway

@@bonezshakergarage 👍🏾

Thanks for the comment

Is a same to me kill the music please

Jesse if you have the same system the remote is already programmed. The key fob is confusing because the lock is channel 1, unlock is channel 2. I ran my drivers door on channel 1 and my passenger door on channel 2 which means channel 1 on the remote was lock and channel 2 was unlock. I don’t have power locks on my truck the system will only pop the doors open. If you are wanting to lock and unlock then you will have to run both your door locks to channel 1 and channel 2 for unlock. Then you will use channel 3 for the drivers door to pop open and channel 4 for the passenger door. I hope this helps.

Also you can set the black box on latch and you Can hit the channel 1/2 once and it will lock the door and you hit it again it will unlock

When I pop mine it opens both doors at the same time I want them on there own

@@jeremyphotographer3415 you have 4 wire that work for the buttons on the remote. If yours is like mine the wire color is 2 blue and 2 green. You have to put them in different locations on the control box. You have to figure that out. Now there is a unlock, lock, trunk and there is one more button on the remote.

Don’t really pay attention to what it is. Make it what you want it to be. That is the easiest way I can tell you. Watch my video on the install all the way because I explain what each wire do and what I was going to make it do. If you still need help let me know. Glad luck!

The remote is already programmed. You have to set the 3 or 4 white buttons on the box

@@bonezshakergarage i tried that. No go. Cant get it to pot on bench like u had it i just didnt use a relay i had my hot hooked and ground hooked then on four plug i used green wire to back of popper but nothing am i doing it wrong

@@robbigemon1868 take a photo of how you have it hooked up and I can see if I can help you. A video would be better

@@bonezshakergarage I dont know how to take picture or video and send on youtube

@@robbigemon1868 my IG Bonezshakergarage

I did this video a while ago. I will have to look at my instructions and I will let you know

Basically the remote is already programmed. My control box I have 1 red wire, 1 black wire, 2 green and 2 blue. Now, I ran my wires different because I only have 2 doors and I wanted to pop the individually. The green and blue wires are a channel on the remote. If you want to FaceTime let me know and I could walk you thru it.

Hello I have all those wires the way you mentioned but it still doesn't want to work for some reason at this point I have a head ache 😣

The paper says press little button for 2 seconds then push one button on control and it should program but it doesn't do anything

@@juanlucero4766 My remote is nothing like that. There must be something wrong with the remote or the control box