Install macOS Sonoma on Unsupported Macs using OpenCore (Step-by-Step Tutorial) 

Thank you so much for your thoughtful feedback! I'm delighted to hear that the video was helpful for your OS upgrade on an unsupported Macintosh device. It's always rewarding to know that the effort put into creating a comprehensive and interruption-free guide is appreciated. Happy upgrading!

Definitely best one I watched so far very detailed didn’t skip any steps literally felt like he was doing the update for me.

*Macintosh Team, but the compliment is gold! Thank you 🙏

Mere pass 2009 macbook hy us pe sonama update ho skta hy plz tell.me

@@funbizshorts5592 The sad update is my 2009 mac wound turn on the display and i cant get a external monitor to boot up on it.. so i am a bit lost on how to continue

Thank you for the positive feedback! I'm glad you found the explanation helpful. Don't worry; everyone starts somewhere, and being eager to learn is fantastic! If you encounter a stuck update on your Mac, here are some general steps you can take: Restart Your Mac: A simple restart can sometimes resolve update-related issues. Check Internet Connection: Ensure that your Mac is connected to the internet, as updates often require a stable connection. Software Update Settings: Go to "System Preferences" > "Software Update" and check if there are any available updates. Sometimes manually triggering the update can help. Check Storage Space: Ensure you have enough free storage space on your Mac. Updates may fail if there's insufficient space. As for viewing logs of a failed installation, you can use the Console app to check for error messages. Here's how: Open the Console app (you can find it in Applications > Utilities). In the left sidebar, navigate to "User Reports" and "System Reports." Look for entries related to the failed update. The logs may provide information about the issue.

Thank you for your kind words! I'm glad to hear that the video was helpful for upgrading your late 2015 iMac to Sonoma. To use Target Display Mode and connect it to your new MacBook Pro 16" Max, you'll likely need a Thunderbolt 3 (USB-C) to Thunderbolt 2 adapter along with a Thunderbolt 2 cable. This setup should allow you to link the two devices seamlessly. Make sure both devices support Target Display Mode, and you should be good to go! If you have any more questions or need further assistance, feel free to ask. Best of luck with your setup!

To change the read and write permissions at the root level of a disk on macOS, you can use the Terminal and the "chmod" command. Here's how: Open Terminal (you can find it in the Utilities folder within the Applications folder). Use the "sudo" command to execute the following command with administrative privileges. Replace "/Volumes/YourDiskName" with the path to the disk you want to change permissions for: sudo chmod -R 777 /Volumes/YourDiskName This command will give read, write, and execute permissions to all users on the specified disk. Be cautious with this command, as it grants full access to all users. Adjust the permissions (777) as needed based on your specific requirements.

Regarding Boot Camp, installing OpenCore on an unsupported Mac typically doesn't interfere with the ability to use Boot Camp. OpenCore primarily affects the macOS boot process and doesn't directly impact Windows compatibility. However, it's always a good idea to proceed with caution and ensure you have backups of your important data before making significant changes to your system. If you encounter any issues or have further questions, feel free to ask. Good luck with your installation

Hi there! Step 1. download OpenCore for your unsupported Mac. Visit dortania.github.io/OpenCore-Legacy-Patcher/ Step 2. Install: Build and Install OpenCore. Step 3. Install: Install the apply the Post-Install Root. Patch option. This should help resolve the issue with the missing popup for installing to your hard drive. If you have any questions during the process, feel free to ask! Good luck!

Thanks for reaching out! I totally understand your concern. It's worth noting that the process has become smoother, and manually selecting Macintosh HD shouldn't be necessary. The step you mentioned at 10:25 used to be necessary in previous versions, but with OCLP 1.3.0, it's no longer required. I appreciate your feedback and feel free to reach out if you have further questions!

It seems like you're encountering an issue with OpenCore not detecting the internal Fusion Drive during the installation process. Here are some steps and considerations that might help you troubleshoot the problem: Check Config.plist: Ensure that your config.plist file is properly configured. Pay special attention to the sections related to drives, boot arguments, and SATA controllers. Verify that the necessary kexts (kernel extensions) are present and properly configured in the config.plist file. This includes kexts for SATA controllers and disk drives. Use Proper Kexts: Make sure you have the required kexts for your storage controller in the EFI/OC/Kexts folder. For Fusion Drive, you might need kexts related to AppleRAID or storage controllers specific to your Mac model. Check BIOS/UEFI Settings: Confirm that your BIOS/UEFI settings are correctly configured. Ensure that your storage controller is set to AHCI mode. Try Different Ports: If your Mac has multiple SATA ports, try connecting the Fusion Drive to a different port to see if it's detected. Use the Latest OpenCore Version: Ensure that you are using the latest version of OpenCore. Check for updates and use the most recent release. Check for Fusion Drive Compatibility: Verify that OpenCore and your macOS version are compatible with Fusion Drive setups. Some versions may require specific configurations for Fusion Drives. USB Port Configuration: Verify USB port configurations in your config.plist. Sometimes incorrect USB port mappings can cause issues with drive detection. Logs and Debugging: Check OpenCore logs for any error messages or warnings during the boot process. Enabling debug logging in OpenCore might provide more insight into the issue. Consider a Different Bootloader: If the issue persists, you might want to try a different bootloader (e.g., Clover) to see if it can detect the Fusion Drive. Consult OpenCore Documentation: Refer to the official OpenCore documentation and forums for any specific guidance related to Fusion Drives and your Mac model. If the problem persists after trying these steps, you may want to seek assistance on forums dedicated to Hackintosh and OpenCore, where you can provide more details about your configuration for more targeted help.

It sounds like you've got a solid setup using OpenCoreLegacy Patcher on your 2017 MacBook Pro to run Ventura. If you clone that internal SSD onto an external SSD and attempt to boot your 2017 iMac from it, Ventura would indeed still be a newer OS than what is natively accepted by Apple. To get Ventura running on your iMac using OpenCoreLegacy Patcher, you would likely need to rebuild the EFI with the appropriate settings for your iMac model (in this case, 18,2). This ensures that the necessary configurations are in place for your iMac's hardware. While it might seem a bit confusing, don't worry-OpenCore can be complex, especially when dealing with different hardware configurations. Take your time, follow our tutorials specific to your setup, and don't hesitate to ask for help if needed. Good luck with your setup, and I hope you get Ventura running smoothly on your iMac!It sounds like you've got a solid setup using OpenCoreLegacy Patcher on your 2017 MacBook Pro to run Ventura. If you clone that internal SSD onto an external SSD and attempt to boot your 2017 iMac from it, Ventura would indeed still be a newer OS than what is natively accepted by Apple. To get Ventura running on your iMac using OpenCoreLegacy Patcher, you would likely need to rebuild the EFI with the appropriate settings for your iMac model (in this case, 18,2). This ensures that the necessary configurations are in place for your iMac's hardware. While it might seem a bit confusing, don't worry-OpenCore can be complex, especially when dealing with different hardware configurations. Take your time, follow guides or tutorials specific to your setup, and don't hesitate to ask for help if needed. Good luck with your setup, and I hope you get Ventura running smoothly on your iMac!

After installing OpenCore, some users may experience issues with Wi-Fi connectivity. Here are a few steps you can try to fix this: Restart Your System: Sometimes a simple restart can resolve connectivity issues after installing new software like OpenCore. Check Wi-Fi Settings: Ensure that Wi-Fi is enabled on your device and that you're trying to connect to the correct network. Sometimes, settings might change during installation, so double-checking is important. Update Drivers: Make sure that your Wi-Fi drivers are up-to-date. Sometimes, outdated drivers can cause compatibility issues with new software installations. Verify Configurations: Review your OpenCore configuration settings to ensure that they are not conflicting with your Wi-Fi hardware. Check for any specific settings related to network configurations. Reset Network Settings: Resetting your network settings can sometimes resolve connectivity issues. This can often be done through the settings menu on your device. Contact Support: If you've tried the above steps and are still experiencing issues, consider reaching out to the OpenCore community or your device manufacturer's support for further assistance.

Considering the challenges you've faced, it might be worth performing a clean install of your iMac using Recovery Mode. After your Mac is freshly restored, you can then proceed to reinstall OpenCore, and this process may likely resolve the persistent issues you've been encountering. Remember to make a thorough backup before starting the clean install to ensure your data is safe. Wish you the best of luck.

Hi there! Thanks for checking out the video, and I'm glad you found it helpful. In regards to your question, I completely understand the concern about erasing the internal hard drive. Before proceeding, I recommend creating a backup using Time Machine. It's a reliable way to safeguard your data. Alternatively, you can install OpenCore on an external drive, such as an SD card, hard drive, USB, SSD, or NVMe M.2 drive. This way, your internal drive remains untouched, and you can always boot from the external drive when needed. If you're interested in installing OpenCore on an external hard drive, we have a dedicated video that guides you through the process step by step. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-XykSgsiQHxA.html Hope this helps! If you have any more questions, feel free to ask.

Thanks for getting back to me so quickly! So if I were to use Time Machine to backup my hard drive, would I be able to restore it back on to my hard drive while still having open core on my computer? Or would I just have to keep my backup separate? I really hope I’m making sense, I’m not familiar with all the terminology 😅

Hey there! It's great to hear you've made progress with OpenCore. Regarding your Wi-Fi and Ethernet issues, it sounds like there might be a compatibility or configuration issue with the update. Have you checked your config.plist to ensure the proper kexts and drivers are loaded for your network hardware? Additionally, the prompt to install on your hard drive could indeed be related to an update. Double-checking your installation process and verifying all settings might help resolve these connectivity issues. Hang in there, and I hope you'll get your internet connection sorted out soon!

Check if the EFI partition is properly mounted. Confirm correct OpenCore installation on the EFI partition. Reset NVRAM (Command + Option + P + R during startup). Check BIOS settings for booting from external drives. Try different USB ports on the Mac Mini. Verify OpenCore configuration for your Mac Mini model.

Update: I solved the issue by resetting the pram. Very easy fix and now everything works perfectly on my iMac mid 2011

Thanks for reaching out! If you're not seeing the EFI or Sonoma options, try downloading OpenCore again and follow the installation steps outlined in the video. Sometimes, a fresh download can resolve any issues. Follow the last steps demonstrated in the video after re-downloading OpenCore. If you encounter any challenges, feel free to ask for additional guidance. Good luck with your installation!

@macintoshteam6657 I've just been giving my Macbook Pro Early 2013 the acid test after installing Sonoma with the fantastic help from your tutorial and all I can say is I'm astounded! I'm a video editor so FCPX is what I use constantly, so I hammered it with all of the hardest plugins, effects, 3D titles on a 4K HEVC h.265 project rendering to an external hard drive. This is also whilst I had 4 heavy websites open including RU-vid and I was playing videos in 4K whilst FCPX was rendering. FCPX did crash once early on, but that was after I bombarded the project with so many heavy effects that I wasn't surprised! (not my usual workflow!) But the system remained solid. I can now also play native 4K raw HEVC h.265 video footage directly in Finder without jittering or dropped frames (something that I could not do in Catalina) So, I just wanted to say, thank you so much for your tutorial, it works a treat! Robin

@@macintoshteam6657 Got it. If i try downloading OpenCore again, do I need to delete the previous Opencore files?

Logic Pro Compatibility: Before upgrading, it's crucial to check if the version of Logic Pro you're using is compatible with the macOS version you plan to upgrade to. Software developers often provide information about compatibility with different operating system versions.

Thank you very much for this 🎉🎉🎉

Hi, do you install Sonoma on 2009 late iMac? i have one and is on BigSur right now

Hi, To download macOS you can go to the Mac App Store or the official Apple website.. If you're looking for a step-by-step guide, I've created a video explaining how to download macOS. Check it out here: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-iMXgUb2Gczo.htmlsi=noWqOUrbpaoe6Yey Feel free to let me know if you have any questions or need further assistance!

Can anyone advise please

I believe it will remove it, specially if you wipe the drive before installing the new os

Great question! Erasing the internal drive is one approach to ensure a clean installation and minimize potential conflicts. However, it's not strictly necessary. For the iMac where Sonoma is being installed, you have the option to erase the internal drive if you prefer, but it's not mandatory. You can indeed install the new OS on the internal drive without deletion, especially if you have a full backup. In your case, creating a USB boot drive for your friend's 16,2 iMac should work without erasing the drive. Feel free to proceed with the installation, and don't hesitate to reach out if you have further questions. Happy upgrading.

If you've installed OpenCore on a Mac and are experiencing issues, you may want to check your configuration files, ensure compatibility with your hardware, and refer to OpenCore's documentation for troubleshooting. Verify that you've followed the installation guide correctly and consider seeking assistance on forums or community support channels for specific help with your situation. Or renew your wifi adres.. have you installed reinstall the post install patch tool. Hope this will help..

@@macintoshteam6657 I figured out what was wrong. I had to download and install Kernel Debug kit 14.3. Everything went well. Thank you and your time and effort are greatly appreciated.

The Post Install Patch Tool was my only way to troubleshoot this problem @@macintoshteam6657

Yes, you can

Here you have the answers to your questions. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-oeXcSRMecZk.htmlsi=9E-pI063tWLzVNv_ Installation problem ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-XykSgsiQHxA.htmlsi=h34VyozcqcBAS5DU Nvme

Enabling support for 11th generation Intel GPUs on macOS through patches might not be straightforward. It heavily depends on the specific GPU model and the macOS version. OpenCore patches and drivers would need to be compatible with the hardware.

Thank you for reaching out, and I'm glad you found the video helpful! It sounds like you're encountering an issue during the Sonoma installation process on your iMac 14.1 with an external SSD. The error message you're seeing, "An error occurred preparing the software update," can be a bit tricky to diagnose without more information. However, here are a few suggestions you can try to troubleshoot the issue: 1. Check Installation Files: Ensure that the Sonoma installation files on your external SSD are not corrupted. You may want to try re-downloading the Sonoma installer and creating a fresh bootable drive. 2. Verify External SSD: Make sure that the external SSD you're using for the installation is in good condition and properly formatted. You can use Disk Utility to check for any errors on the SSD. 3. Disconnect External Devices: Sometimes, connected external devices can interfere with the installation process. Try disconnecting any unnecessary peripherals or devices from your iMac before restarting the installation. 4. Check System Compatibility: Ensure that your iMac 14.1 meets the system requirements for Sonoma. Incompatibility with certain hardware components could potentially cause installation errors. 5. Seek Community Support: Consider reaching out to online forums or communities dedicated to Sonoma or macOS installations. Others who have faced similar issues may be able to provide more specific advice or solutions. I hope one of these suggestions helps resolve the issue for you and allows you to successfully complete the Sonoma installation. If you have any further questions or concerns, please don't hesitate to ask. Good luck!

@@macintoshteam6657 Many thanks for your detailed reply👍🏻

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-oeXcSRMecZk.htmlsi=pVyiHgLu_5vU3IfN

Hi! You can try adjusting the display settings on your MacBook. Go to 'System Preferences' > 'Displays' and experiment with the 'Scaled' options to find a comfortable size. If the issue persists, there might be specific graphics or display drivers to configure in OpenCore.

I'm sorry to hear you're facing challenges during the installation process. It can be frustrating when things don't go smoothly. If you're stuck at the recovery screen after erasing the drive, you might want to double-check your installation steps, ensuring that you've formatted the drive correctly using Disk Utility before proceeding. If the issue persists, don't hesitate to seek help from the community or check for any updated guides. Best of luck, and I hope you get it sorted out soon.

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-xqlcmxMdtlE.htmlsi=2b3pJAMWQ0Mhjul8 this video shows you what you need to do!

​@@macintoshteam6657thank you soo much you saved me !:))))

Hi, It’s your choice.

@@macintoshteam6657 how? Can u explain please?

Hey there! It seems like you're encountering some unexpected issues with Chrome after installing OpenCore Sonoma on your Mac Pro. While OpenCore can offer enhanced functionality and performance, it's possible that there might be compatibility issues or conflicts with other software components. Since reinstalling Chrome didn't resolve the problem, it's worth investigating if there are any specific settings or configurations in OpenCore that could be causing this issue. Additionally, checking for any recent updates or patches for OpenCore and Chrome might help alleviate the problem. In the meantime, using Safari as a workaround is a sensible choice. If you're still experiencing difficulties, reaching out to the OpenCore community or seeking assistance from tech forums could provide further insights and potential solutions. I hope you're able to resolve the issue soon and get back to smooth browsing on your Mac Pro!

Thanks for your detail answer and suggestion!

Great to hear that it worked for you! Regarding automatic updates, it's essential to approach them cautiously with OpenCore setups. Always refer to the OpenCore documentation for the recommended update procedures to ensure a smooth and stable system. Stay informed about any compatibility considerations and follow the suggested practices to maintain your OpenCore configuration.

Yes, it's possible to install OpenCore on an older Mac from 2012 running Sierra with only an HDD. While OpenCore is primarily designed for newer hardware, it can still be used to boot macOS on unsupported Mac models like yours. Just be sure to follow a reliable guide tailored to your specific hardware, and you should be good to go! If you have any further questions, feel free to ask

@@macintoshteam6657 I wish you could come to India and do it for me 😭 I'm so lost but your videos help a lot

I'm sorry to hear you're having trouble. Let's try a few steps to troubleshoot the issue: 1. **Check the USB Drive**: Ensure that the USB drive is properly formatted and the OpenCore installer is correctly set up. Sometimes, a corrupted or improperly prepared USB drive can cause issues. 2. **Verify USB Port**: Try using a different USB port on your Mac. Sometimes, certain ports may have issues or may not be recognized during boot. 3. **Reset NVRAM/PRAM**: Resetting the NVRAM/PRAM can sometimes resolve boot issues. To do this: - Shut down your Mac. - Turn it on and immediately press and hold Option + Command + P + R for about 20 seconds. - Release the keys and let your Mac restart. 4. **Reset SMC**: Resetting the System Management Controller (SMC) can also help with hardware-related issues. For a MacBook with a non-removable battery: - Shut down your Mac. - Press and hold Shift + Control + Option on the left side of the built-in keyboard, then press the power button. - Hold these keys and the power button for 10 seconds. - Release all keys and the power button, then press the power button again to turn on your Mac. 5. **Double-check OpenCore Configuration**: Make sure that the OpenCore configuration is correct for your specific model of MacBook Pro. If there are any mistakes in the configuration files, it could cause boot issues. Refer to the OpenCore guide to ensure all steps were followed correctly. 6. **Recreate the USB Installer**: If the above steps don’t work, try recreating the USB installer from scratch. Follow the OpenCore installation guide carefully to ensure all steps are completed correctly. If you continue to have trouble, consider the following additional options: - **Use a Different USB Drive**: Sometimes the USB drive itself may have issues. Try using a different USB drive to create the installer. - **Seek Help from the Community**: The OpenCore community is very active and helpful. You might find someone who has faced a similar issue and can provide specific guidance. If you need step-by-step guidance on any of these suggestions or further assistance, please let me know! I'm here to help you get through this installation process.

Wow. Many thanks for the details. I tried almost whole day. Will check these valuable instructions after work.

Hi no change after your instructions. Main issue is I can’t find the boot pic screen. When I press option keys after chimes I can hear fan spin sounds on and off but nothing on the screen.😢 Also I can’t enable SIP. How can I get recovery mode?

@@MyGeogy If your Mac shows a blank screen with no lights or chimes after holding the Option key to access the boot menu, it suggests a more fundamental issue, possibly with the hardware, the USB installer, or the OpenCore configuration. Here are some steps to diagnose and resolve this issue: ### Step-by-Step Troubleshooting 1. **Check the USB Installer**: - Make sure the USB installer is correctly created and that it contains all necessary files, including OpenCore, macOS installer, and essential kexts. 2. **Verify USB Ports and Drive**: - Try using different USB ports on your Mac. - If possible, use a different USB drive to rule out any issues with the current one. 3. **Reset SMC and NVRAM/PRAM**: - **Reset SMC** (System Management Controller): - Shut down your Mac. - For a MacBook with a non-removable battery: Press and hold Shift + Control + Option on the left side of the keyboard, then press the power button. Hold these keys for 10 seconds. Release all keys and the power button, then press the power button again to turn on your Mac. - **Reset NVRAM/PRAM**: - Shut down your Mac. - Turn it on and immediately press and hold Option + Command + P + R for about 20 seconds. Release the keys and let the Mac restart. 4. **Check the OpenCore Configuration**: - Ensure the `config.plist` is properly configured for your Mac model. Incorrect settings can cause boot issues. - Use the [OpenCore Configurator](mackie100projects.altervista.org/download-opencore-configurator/) or [ProperTree](github.com/corpnewt/ProperTree) to verify and edit your `config.plist`. 5. **Verbose Mode and Basic Graphics**: - Add `-v` to the boot arguments for verbose mode to see detailed boot messages. - Add `-igfxvesa` to force basic VESA graphics mode, which can help if more advanced settings are causing issues. ### Creating a Proper OpenCore Configuration 1. **Download and Prepare OpenCore**: - Ensure you have the latest version of OpenCore and the necessary kexts (e.g., `Lilu.kext`, `WhateverGreen.kext`). 2. **Set Device Properties**: - Add the appropriate properties for your integrated graphics in the `DeviceProperties` section of your `config.plist`. ```xml DeviceProperties PciRoot(0x0)/Pci(0x2,0x0) AAPL,ig-platform-id AAABAQ== device-id FDUAAA== ``` 3. **Set SMBIOS Information**: - Ensure the SMBIOS settings match your MacBook Pro model (e.g., `MacBookPro11,3` for a 15-inch 2014 model). ```xml PlatformInfo Generic SystemProductName MacBookPro11,3 ``` 4. **Add Necessary Kexts**: - Ensure `Lilu.kext` and `WhateverGreen.kext` are included in the `EFI/OC/Kexts` directory and referenced in your `config.plist` under `Kernel -> Add`. 5. **Boot Arguments**: - In the `NVRAM -> Add -> boot-args` section, add: ``` -v keepsyms=1 debug=0x100 alcid=1 -igfxvesa ``` ### Testing and Diagnosis 1. **Boot from USB Installer**: - Insert the USB installer, power on the Mac, and immediately hold down the Option key. - If the Startup Manager does not appear, try resetting the NVRAM/PRAM again. 2. **Check External Monitor**: - Connect an external monitor to see if it displays anything. 3. **Verbose Mode Boot**: - If you manage to get any output, verbose mode (`-v`) will help you see where the process is halting. ### If the Issue Persists 1. **Recreate the USB Installer**: - Use another Mac to recreate the USB installer, ensuring each step is followed correctly. 2. **Community Help**: - Post your `config.plist` and any verbose boot logs to forums such as [r/hackintosh](www.reddit.com/r/hackintosh/) or [InsanelyMac](www.insanelymac.com/forum/). 3. **Hardware Diagnostics**: - If nothing works, there might be a hardware issue. Run Apple Diagnostics by holding `D` during startup to check for hardware problems. By following these steps, you should be able to diagnose and resolve the issue with your Mac not booting from the USB installer. If you need further assistance with specific configurations or steps, feel free to ask!

If you're experiencing issues with the mouse, keyboard, and Bluetooth functionality after configuring OpenCore, here are some steps you can take to troubleshoot the problem: Check USB Connections: Ensure that your mouse and keyboard are properly connected to USB ports on your Mac. Try connecting them to different USB ports to see if they work. Verify Bluetooth Settings: If your mouse and keyboard are Bluetooth-enabled, check your Mac's Bluetooth settings to ensure that Bluetooth is turned on and that the devices are properly paired. Reset Bluetooth: Try resetting the Bluetooth module on your Mac by turning Bluetooth off and then back on again. You can do this from the Bluetooth menu in System Preferences or by clicking the Bluetooth icon in the menu bar. Check OpenCore Configuration: Review your OpenCore configuration settings to ensure that they're not causing conflicts with USB or Bluetooth devices. Make sure that any relevant ACPI patches or USB-related settings are configured correctly. Check for Driver Issues: Ensure that you have the necessary drivers installed in your OpenCore configuration to support USB and Bluetooth devices. You may need to add additional drivers or kexts to properly support your hardware. Try Booting Without OpenCore: If the issues persist, try booting your Mac without OpenCore to see if the problem is related to the bootloader configuration. If the mouse, keyboard, and Bluetooth work without OpenCore, then there may be an issue with your OpenCore configuration. Seek Community Support: If you're still experiencing issues after trying the above steps, consider seeking assistance from the OpenCore community forums or support channels. Other users may have encountered similar issues and could provide additional troubleshooting steps or solutions. By following these steps and troubleshooting the mouse, keyboard, and Bluetooth issues, you should be able to identify and resolve the underlying problem.

Yes you can

@@macintoshteam6657 hello my friend I followed your steps carefully but not successfully I could not install Sonoma in my laptop

I'm sorry to hear about the issue you're encountering. It seems like you're facing a compatibility error while installing macOS Ventura on your Mac. To troubleshoot, ensure your Mac meets the system requirements, use a genuine Ventura installer, check for firmware updates, and seek assistance from online communities. If the problem persists, your Mac may not be compatible with Ventura. Feel free to ask if you have further questions. Good luck!

@@macintoshteam6657 yea I’m trying to get this installed on a Mac mini 4,1 mid 2010 I think.

Here is your solution ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-oeXcSRMecZk.htmlsi=bB1o3TF6yd89yhIH

@@macintoshteam6657 thanks for answer. I have found my Problem and fixed it. I am very happy that‘s noe it worke Fine.

Yes, that’d possible

Have you install it?

I want to install it too on my macbook pro 2011 late.

Thank you for your appreciative words! I'm glad to hear that the Sonoma upgrade for your Mac mini 2012 was successful. I hope your upgraded system meets your expectations and enhances your mac experience.

Hi! The change in the USB name on the desktop post-installation might be due to the system recognizing it with a default or generic name. It's common for the system to display the device name or identifier. If you want to change it back to 'Sonoma,' you can do so manually. Right-click on the USB drive on your desktop, select 'Get Info,' and then change the name under 'Name & Extension.' Feel free to reach out if you have any more questions or need further assistance!

Thank you for the information...

Hi there! Thanks for reaching out. It sounds like you're experiencing an issue with your macOS Sonoma installation, particularly with freezing on the startup window. This can be frustrating, but there are a few things we can try to troubleshoot and potentially resolve the issue. Firstly, have you tried resetting the System Management Controller (SMC) on your MacBook? Sometimes, resetting the SMC can help resolve various startup and performance issues. Here's how you can do it: Shut down your MacBook. Press and hold the Shift, Control, Option, and Power buttons simultaneously for about 10 seconds. Release all the keys and then press the Power button again to turn on your MacBook. If the issue persists after resetting the SMC, you may want to try booting into Safe Mode to see if the problem still occurs. Safe Mode loads macOS with minimal system extensions and drivers, which can help identify if the issue is related to third-party software or drivers. Here's how to boot into Safe Mode: Shut down your MacBook. Press the Power button to turn it on, and immediately press and hold the Shift key. Keep holding the Shift key until you see the Apple logo and progress bar. Once you're in Safe Mode, check if the startup window still freezes. If not, it could indicate a third-party software or driver causing the issue. If the issue persists even in Safe Mode, you may want to consider reinstalling macOS Sonoma. Sometimes, a corrupted installation can lead to startup issues. Before reinstalling, ensure you have a backup of your important data

@@macintoshteam6657 Thank yoi for your response. I really appreciate.🙏 I tried booting the macbook in safe mode and in safe mode, the issue becomes more critical and the pointer moves for 2-3 seconds and then freezes and does not let me type the passcode on the screen and in 4-5 second, the screen flashes and again pointer starts moving and freezes in 2-3 seconds and it keeps happening like this.

@@patelbhaveshm07 I'm sorry to hear that Safe Mode didn't improve the situation and actually made it worse. It sounds like there may be a deeper issue with your macOS Sonoma installation or possibly with the hardware itself. At this point, it might be best to consider reinstalling macOS Sonoma from scratch. Before doing so, ensure that you have backed up all your important data to prevent any loss during the reinstall process. Additionally, double-check that you selected the correct host model during the installation procedure. Choosing the wrong model could potentially lead to compatibility issues and unexpected behavior. If you're uncertain about the host model you selected, it might be worth reviewing the installation guide or seeking assistance from the macOS Sonoma community to ensure everything is configured correctly. I hope reinstalling macOS Sonoma and verifying the host model selection resolves the freezing issue on startup. If you continue to experience problems after reinstalling, it may be necessary to seek further assistance from Apple Support or a certified technician to diagnose any underlying hardware issues. Let me know if you need further assistance or have any other questions!

@@macintoshteam6657 Thanks for your quick response again!🙏 I am completely unaware of Host model thing. Do I need to configure that too? Kindly guide me in that regards. Thank you🙏

You're welcome! It's understandable to have questions, especially if you're new to the process. Yes, configuring the host model is an important step during the macOS Sonoma installation. It helps ensure that the operating system is optimized for your specific Mac hardware. If you missed this step during the installation process, don't worry! I explain it in detail in the video tutorial. It might be helpful to go back and review that part just to ensure everything is set up correctly for your Mac model. Let me know if you need any further assistance or clarification!

It sounds like you've encountered an issue with pairing your wireless keyboard after successfully installing macOS Monterey. Here are a few troubleshooting steps you can try: Check Battery: Ensure that your wireless keyboard has sufficient battery power. Sometimes, low battery levels can prevent proper pairing. Reset Keyboard: Try resetting your wireless keyboard. Most wireless keyboards have a reset button or a specific key combination for this purpose. Refer to the keyboard's manual for instructions on how to reset it. Restart iMac: Sometimes, simply restarting your iMac can resolve connectivity issues. Pairing Sequence: Make sure you're following the correct pairing sequence for your keyboard. Typically, this involves putting the keyboard into pairing mode and then using your iMac to search for and connect to it via Bluetooth settings. Bluetooth Interference: Check for any sources of Bluetooth interference near your iMac, such as other wireless devices or electronic equipment. Moving these away can sometimes improve connectivity. Forget Device: If your keyboard was previously paired with another device, try forgetting the device on both the keyboard and your iMac, and then attempt to pair them again from scratch. Update macOS: Ensure that your iMac is running the latest version of macOS Monterey. Sometimes, software updates include fixes for Bluetooth connectivity issues. I hope one of these suggestions helps you resolve the issue with your wireless keyboard pairing. Good luck!

@@macintoshteam6657 I’m at a black screen upon start up and it’s switching between a mouse and a keyboard icon. I’ve tried what you suggested and no luck. Can’t find my manual. If used a wired keyboard do you think it would work?

@@hhawki3 I think that also could work.

@@macintoshteam6657 thanks for feedback. I’ll let you know when I have a keyboard if it works.

@@macintoshteam6657 I’m at Install OpenCore. It’s asking me if I want to install OpenCore on my USB flash drive 31.0 GB or ST31000528AS-1.0 TB. If I just want to download OpenCore on this Mac I’m on, which should I choose?

Hey! I appreciate you reaching out. If your installation is causing continuous reboots to recovery mode, it might be due to a configuration issue or an incompatible setting. Double-check your OpenCore configuration and ensure it aligns with your Mac model and the Sonoma version you're installing. Additionally, review the troubleshooting steps in the video or the OpenCore documentation. If the issue persists, feel free to provide more details for further assistance. Best of luck!

Feel free to check out this link for a video that could offers a solution: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-oeXcSRMecZk.html

Hey there! If you're stuck because your mouse or keyboard isn't working in Recovery Mode, here are a few suggestions: Try Wired Devices: If you're using wireless peripherals, switch to wired ones. Recovery Mode might have limited support for certain wireless devices. Test Different USB Ports: Plug your mouse and keyboard into different USB ports on your Mac. Sometimes, specific ports can cause issues. Original Apple Accessories: Whenever possible, use original Apple keyboards and mice, as they are more likely to have full compatibility. Reset SMC and PRAM: Resetting the System Management Controller (SMC) and Parameter RAM (PRAM) could help. Start your Mac while holding Option + Command + P + R until you hear the startup chime twice. Check for Physical Damage: Inspect your peripherals for any physical damage, and ensure the cables are in good condition. Boot in Safe Mode: Try booting into Safe Mode (hold down the Shift key during startup) to see if that helps with peripheral recognition. Use Direct USB Connection: If you're using USB hubs, connect your peripherals directly to your Mac to rule out any issues with the hub. Check Accessibility Settings: In Recovery Mode, navigate to the Apple menu, go to "System Preferences," and check the Accessibility settings to ensure your mouse and keyboard are recognized. Internet Recovery: If all else fails, consider using Internet Recovery by holding Option + Command + R during startup. This downloads recovery tools from Apple's servers. If the problem persists, you might want to reach out to the OpenCore community or check Apple Support forums for more specific assistance. Hope this helps!

Using a USB drive is recommended for Open Core installation as it provides a safer way to test the setup without potentially risking data loss on your main system. However, if you have ample space on your system and are willing to take the risk of potential data loss, you can proceed without using a USB drive. Just ensure you've backed up any important data before proceeding with the installation. Keep in mind that while it's technically possible to install directly on your system, using a USB drive adds an extra layer of safety and flexibility during the installation process. Hope this helps clarify things for you!

@@macintoshteam6657 thanks a lot and for your quick response. I'll get a drive today and try the installation. I'll be back here should I run into challenge(s). Please do well to attend to me.

@@macintoshteam6657 again, I already downloaded OpenCore Legacy Patcher on my system before I came across your video. Should I transfer it to the USB drive before proceeding?

@@infohub3709 It seems like a sensible approach to remove OpenCore and start fresh with installation on the USB. This way, you can ensure that everything is set up correctly.

@@macintoshteam6657 I have done as you said. But tye issue I'm having right now is in downloading macOS installer. Half way through the download, I get an error that says "Download failed: HTTPSConnectionPool(host='swcdn.apple.com', port=443): Read timed out". What could be the problem?

Apple does not officially support OpenCore because it's a third-party bootloader that allows for macOS installations on non-Apple hardware, which goes against Apple's terms of service. Apple designs its software to run exclusively on its own hardware for a controlled and optimized user experience. OpenCore, being a community-driven project, enables users to install macOS on unsupported hardware, but it's not officially endorsed or supported by Apple.

@@macintoshteam6657 ty for the reply🔥

Hold down option on reboot and select restore from time machine backup ... Ur old system should reload

@@vidpic8311thanks. I did the Time Machine backup on another usb stick and it doesn’t show up but I was able to access the files. Just wish I could run Sonoma.

I figured it out the problem was my USB stick, I bought a new one and tried it and did the same steps and it worked perfectly!

The message about 'looking for a server' indicates that the system is attempting to establish a network connection, possibly for updates or downloads. To address this, ensure your network settings are properly configured. If the issue persists, consider proceeding without connecting to a server for now. Keep up the progress, and feel free to reach out if you encounter any further challenges.

@macintoshteam6657 thank you for the speedy reply I used the not now option and the install is in the final stages however , I do not have any wifi and realize something is off with the graphics card because I can't set a wallpaper.. how do I fix this part

@@kymani-vauncampbell341 If you're experiencing any issues with your Mac, try resetting the PRAM (Parameter Random Access Memory). It can help resolve various startup and performance issues. To do this, simply restart your Mac and immediately hold down the Command (⌘) + Option (⌥) + P + R keys simultaneously. Keep holding them until you hear the startup sound for the second time, then release the keys. Your Mac will then restart, and hopefully, any glitches or problems will be resolved. Let me know if you need any further assistance!

Reinstalling to Ventura is an option, but my recommendation is: don't update. When it's working, it's working. Option 1: 1. Boot into Recovery Mode: 2. Access Disk Utility: 3. Erase the Disk: 4. Reinstall macOS: 5. Set Up macOS: 6. Restore Data (Optional): Option 2: Boot into Safe Mode: • Restart your MacBook and hold down the Shift key Reset NVRAM Command + Option + P + R Revert OpenCore Changes • If you can access OpenCore settings during boot (by pressing the appropriate key), try to revert any recent changes that might have caused the issue. Boot into Recovery Mode Seek Help on OpenCore Forums

MacBookPro11,3 Note: When booting macOS Sonoma, you'll need to boot into safe mode if acceleration patches are not installed yet. Otherwise, you'll hit a black screen due to missing NVIDIA drivers. (opens new window) Safe Mode can be entered by holding Shift + Enter when selecting macOS Monterey in OCLP's Boot Menu.

Sometimes, a simple re-download of OpenCore can solve the issue. Try downloading OpenCore again and reinstalling it. Hopefully, this resolves the problem for you. If you need any further assistance, feel free to ask. Best of luck.

Thank you for sharing your positive experience with OpenCore on the iMac 12,2. Regarding the Bluetooth issue with the LogiTech MX380 keyboard, you might want to check for firmware updates for the keyboard and ensure that appropriate Bluetooth drivers are installed. Attempting to re-pair or resetting the Bluetooth connection could also be helpful. Best of luck!

@@macintoshteam6657 Resolved. need to Reset PRAM or NVRAM. Thank you. All works.

Hello, this is your solution: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-eX370JJ-L5c.htmlsi=mjKaDmRWXUcVQnXz

Maybe this can help: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-oeXcSRMecZk.htmlsi=gsMPuRZMx8_PfhKg