Super easy installation for any homeowner / DIYer. Please remember to like, subscribe, and press the bell for notifications of all of our upcoming videos. This is the product that we installed in this video: www.homedepot....
@@RogueSky8 Hi! Yes… it grabs on pretty tight, but you can work each corner off and it will come right back off. There are ridges on the corners of the vent that grab a hold of the frame as it’s pushed on. In order to get it back off you have to pull pretty hard. I would give a quick check on the sides first before you attempt that just in case whoever installed it decided to side screw it as a permanent installation. If you don’t notice any screws, then give it a good tug on each corner, one at a time, and it will come off for you.👍
Hi! Thank you for watching the video. Yes!! It is absolutely strong enough. In fact, it is very hard to pull the vent cover back off once it is attached. Since this is installed on my garden house, it runs almost the entire day. The cover does not vibrate or shake, and it holds up well when it rains and washes clean with a simple garden hose. I hope that this information helps you 👍
Hi thank you for watching the video. This particular gable vent is an 18 x 24 as the outside dimension. The interior dimension is 16 x 20. The only way that I could see this vent working for your measurement is if you add additional wood to your rough opening to close it in a bit. I hope this information helps 👍