Installation Guide - Unity Performance V3 Side Marker Lights

Подписаться 517

Просмотров 7 тыс.

50% 1

Hello everyone, please follow this install guide step by step to complete the installation of the V3 Side Marker Lights by Unity Performance!
unity-performa...
The wiring for the sequential feature (optional) is the same as V2's, BUT to physically place them on the vehicle there are different steps than previously involved with V1's V2's, and even factory side marker lights so please watch and follow the steps outlined in this video!!
Here is the V2 install video that you can watch to complete the sequential set up: • Real-time Install! Uni...
If you have any questions, please contact me directly here: unity-performa...

Опубликовано:

4 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 16

@unityperformance Год назад

Here is the V2 install video that you can watch to complete the sequential set up: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-8dqfv7a2Y9k.html

@Scottmd714 Год назад

I was actually able to fit the side marker into place with it already plugged in! I also put the first one in forgetting the need to plug it into the harness lol.

@MysticChops 5 месяцев назад

Same here. It was vertical instead of horizontal when i put them into the side marker.

@tomaskonicek7683 Год назад

Hi guys. I have already instal maybe 10 Paris of this side markers. I have two hacks for you. 1) just connect a "bulb" to socket and connector and check if light is working, before, you install it on car completely. You must to be sure about right polarity of connection (+/-). If its oposite, light doesn't work. 2) install "bulb" and socket into light first and then connect it to the connector. Its easier way, then rotate socket to the light thru the fender, when light is already installed. Then you can just click the light to fender easily and its done 😉

@tettazwo9865 Год назад

Looks really fast!

@RunWithDan 4 месяца назад

Hello, I currently have the V2 and one of them keeps popping out after some driving. I can hear an audible click and when I pull on it, it doesn’t come out. I’m not sure why it does this. It was secured for over a year and now it just pops out. Suggestions?

@IvanSanchez-fl8uu 8 месяцев назад

Hello, would the wiring still work even tho I have Halogen to LED Headlight Conversion Wire Harness Adapter. Thank you ! 🙏🏾

@mtxcavalier Год назад

Can we not connect the socket to the side marker then attach it to the car clip? How come this is different now?

@unityperformance Год назад

Much tighter tolerance in the V3's to hold them in securely. There's a bracket that blocks the docket from fully inserting itself onto the cat when it's plugged into the side marker. Alternatively, one can bend the inner bracket towards them and then the side marker with the socket installed could fit through, but that's upon your discretion This way just takes a few more minutes

@mtxcavalier Год назад

@@unityperformance thanks for your response. Cannot wait to have these in hand.

@unityperformance Год назад

Hello everyone, please follow this install guide step by step to complete the installation of the V3 Side Marker Lights by Unity Performance! unity-performance.com/products/side-marker-lights?_pos=2&_psq=SIDE+MARKE&_ss=e&_v=1.0 The wiring for the sequential feature (optional) is the same as V2's, BUT to physically place them on the vehicle there are different steps than previously involved with V1's V2's, and even factory side marker lights so please watch and follow the steps outlined in this video!! If you have any questions, please contact me directly here: unity-performance.com/pages/contact

@YTkingcherry Год назад

So I have the v2 and my driver side side markers keeps coming out of place it just hangs I did the tab method where you bend it a bit and nothing So now I want to get the v3 and my question is are they brighter than the v2 by any chance and is the color temperature close to the stock LED’s?

@jasonbruce9904 5 месяцев назад

Have you tried putting the side marker in without the harness plugged in? I had to do that, then reached behind and snapped the wire harness in. It's easier than trying to turn in the "bulb receptacle" in the notches on the side marker and snapping into place. Hopefully that makes sense.