Installed the LOUDEST Titanium Exhaust on my 996 Turbo!

Подписаться 99 тыс.

Просмотров 53 тыс.

50% 1

My Porsche 911 Turbo gets a much needed aftermarket X-Pipe exhaust. How loud is too loud? Asking for a friend....
Top Speed Exhaust: topspeedauto.c...
Merch - www.boostedape... every $5 gets you entered to win a new Milwaukee 3/8 high speed impact kit. (giveaway ends 4/30/23)
Instagram - / matt13ross
Patreon - / boostedapex (early access to videos!)
Channel Perks: / @matt13ross
Sound/Music for videos: share.epidemic...
Porsche Parts: Site contains affiliate links for which I may be compensated
HPS 5.0 Brake Pads: amzn.to/41PhG5N amzn.to/3EOfiSy
IPD Comp Plenum: amzn.to/3m1pWyM ebay.us/3thcOg
74mm Throttle Body: amzn.to/3m0HGuw ebay.us/T8VmrF
Atoto Wireless Carplay Stereo: amzn.to/3EtocoE
Stereo Wiring harness: amzn.to/3RxeR4l
Dash kit: amzn.to/3HzTJ8S
Alcantara Shift Boot: ebay.us/mLjsAB
LED Signal Relay: amzn.to/3EYun4t
License Plate LEDs: amzn.to/3V1fYdj
ABS Plastic Sheets: amzn.to/3UYpCNw
Fog Light LEDs: amzn.to/3E8AMbN
Turn Signal LEDs: amzn.to/3O8YMA0
High Temp Vacuum Hose Kit: amzn.to/3MHnpDi
Fuel Injection Hose Clamps: amzn.to/3CN9Bmp
Radium Fuel Pump Kit: amzn.to/3MiRRUb ebay.us/uZAFOj
Big thanks to Rennline for supplying awesome parts too!
2 Piece Rotors:www.rennline.c...
SS Brake Lines: www.rennline.c...
Short Shift Kit:
www.rennline.c...
Motor Mounts:
www.rennline.c...
Carbon Fiber Arm Rests:
www.rennline.c...
Carbon Fiber Door Sills:
www.rennline.c...
Shift Knob:
www.rennline.c...
e-sku-p71-60-59/
Transmission Mounts: www.rennline.c...
Garage Upgrades:
Retractable Pressure Washer: amzn.to/3EgZmH1
LED Ceiling Lights (set of 6): amzn.to/36m00GP
LED Cabinet Lights (set of 3): amzn.to/3irLWhg
Quick Jacks: amzn.to/36gkqBc
Wall Cabinets: amzn.to/2TwigqJ
Wall Mount Power Tool Rack: amzn.to/3dNLHvc
Retractable Air Hose Reel: amzn.to/3D6tZyh
Welding:
AHP 203XI Tig Welder: amzn.to/3zH7Zs4
Yeswelder Plasma Cutter: amzn.to/3Iz6xLt
Yeswelder LYG-Q800D Helmet: amzn.to/3FgB9zO
Klutch Welding Table: amzn.to/3r4qqTK
Tillman Tig Gloves: amzn.to/3f7ErL4
Tig Torch Holder: amzn.to/3qbhWex
Deburr Tool: amzn.to/3tiBLSO
Other Tools / Gear I use:
Vevor Ball Joint Press Kit: amzn.to/3ktsntF
Vevor 3 Ton Floor Jack: amzn.to/3kXkH2S
Husky Toolbox (white/black): amzn.to/2V1p9Av ebay.us/oYNmGv
Tekton Swivel Ratchets: amzn.to/3uLXdNs ebay.us/3MHh5k
S.W.A.G Band Saw Table: amzn.to/3ku3Mkh ebay.us/NiEypw
Hanging Extension Cord Reel: amzn.to/2RebLXQ ebay.us/8Yv1X3
Universal Step Drill Bit Set: amzn.to/3ag12TJ ebay.us/4IjhVr
Magnetic Vice Jaw Inserts: amzn.to/2ZmUXPs
Cordless Tools:
Milwaukee Right Angle Grinder: amzn.to/3BwUgFj ebay.us/bRXqAz
Ryobi 1/2 Impact: amzn.to/2UG03Yg ebay.us/3FvRVy
Ryobi 3/8 Power Ratchet: amzn.to/3yek85O ebay.us/4YviJx
Ryobi 1/4 Impact: amzn.to/2UDRVHD ebay.us/11aLy0
Ryobi Angle Grinder: amzn.to/3gnoCAQ ebay.us/W59ocA
Ryobi Drill: amzn.to/3DhyWV1 ebay.us/rqIhti

Опубликовано:

11 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 256

@Onlooker71 Год назад

Sounds good! Personally, I think the stock exhaust tips filled the bumper in better than what you have at the moment.

@seamusmcfitz913 Год назад

If it's behind the bumper....who cares? No one sees it.

@stellanti Год назад

He’s not done. He’s going to get tips. No one would just leave it that way.

@yammy1000 Год назад

@@stellanti I'd like to think so. That looks garbage as it is!

@matt13ross Год назад

Not done, still need to decide on tips.

@pieterverboven4853 Год назад

@@matt13ross What about the 'normal' OEM 996 TT/GT2 tips, they are oval but follow the outline of the hole in the bumper.

@thesearch9048 Год назад

The titanium exhaust sounds good! Love that you can hear those turbos! Now you need to get some decent exhaust tips :)

@matt13ross Год назад

That's the plan!

@ricky_ricardo Год назад

Next Video: Tail Light Tint Removal and mad skids with the E36! Keep up the great work!

@Royalflushness Год назад

Theres no real better option to factory X50 tips. Just get them polished up nicely and they will look the part

@nurk7184 Год назад

Sounds amazing! I would definitely recommend getting some oval tips since i also dislike the "fake" double look tips.

@sucapizda Год назад

Don't melt your fresh rear bumper with out the tips.

@225TTuned Год назад

I vote black oem oval tips! Keep it simple and clean

@andyc86 Год назад

I’m dying to know what is wrong with that window. Another good video and more progress sounds great 👍👍👍

@matt13ross Год назад

Next video!

@miniporscheclub Год назад

Not going to lie, I'm loving this series.

@L0000NEY Год назад

Those OEM exhaust tips were the optional X50 ones and I agree they're ugly. If you get the stock 996 turbo tips they look much better

@C.A.R.L.O.S_L. 7 месяцев назад

The infamous tick noise. Flow 996tt owner, still keeps me on my toes 😅

@Berti_00 Год назад

Man your videos are getting better and better. Awesome edits and content always 👌

@matt13ross Год назад

I appreciate that!

@cucamongaduke3600 Год назад

Sounds amazing I need one for my 996tt. Can’t wait to hear the drive and drone verdict

@grantlingley1385 Год назад

Matt, your tenacity is something but wow are you making progress with the Turbo!!!! Congratulations for sure!!!

@gideontladi Год назад

I had no hope for this vehicle. To see it like this now is fantastic.

@e1kaiser482 Год назад

I LOVE ITTTTT! The turbo noises all the time is beautiful! exactly what i was specting from a exhaust like that. now it sounds as it should be cant wait for the next video driving it finally, racecar sounds

@cheapcargarage Год назад

You need to change angle on the clamps so they don’t get caught on something. Just a little advice from an old tech.

@matt13ross Год назад

Yea I noticed that later

@chesspiece81 Год назад

Matt, this upload is just exhausting. It's really starting to come along and look really nice. I'm glad you got that junkie looking intake off it and the new exhaust on. Now, you just need some upgraded turbos, intercoolers, clutch, and a tune. Don't forget the passenger side window regulator and the rest of the interior. Then maybe later on when it's making 700-750whp, you can do an AWD delete and really have something a lot of fun and terrifying. But after all the grief, the boys have given you in the comments it's really starting to come together. Kudos, man, tons and tons of kudos, and congratulations.

@matt13ross Год назад

I agree with your mods MINUS the AWD delete. I have a RWD V8 car and it’s nice having one that’s a little different with AWD.

@seshelbow336 Год назад

Should reset ecu after fitting new exhaust so ecu can re learn long and short term fuel trims. 👍🏻 disconnect battery 10 mins is an easy way.

@TheCluelessEnthusiast Год назад

Wow! Definitely sounds better than the fabspeed. Probably best 996 turbo I've heard

@martinhogan5970 Год назад

That turbo noise is the sickness!!!!!

@alqasimalobedy37 Год назад

Matt, try Acetone/ATF 50/50 mix for seized, rusted bolts. It works wonders and its cheap! The titanium exhaust sounds awesome.

@matt13ross Год назад

I've heard of that tip before, but haven't tried it yet!

@Just_A_Tourist Год назад

Turbo is whistling like a k700 lol, Love it!

@minimotorn1464 Год назад

Love your videos especially the Porsche ones. Exhaust sounds awesome. Turbo noise sounds good.

@x27off Год назад

My god that’s night and day! Went from atrocious to amazing. And those turbos WIND!

@Turbotuberx3 Год назад

Much better!!!

@violinmiata Год назад

Damn, love the exhaust sound. As Speed Racer said, “it sounds beefy Pop”. Definitely do all the oxygen sensors while they are out. Save the trouble now and figure out what sends a code afterwards. Funny thing, my turbo’ed Miata with an aftermarket market race cat will get a code when my wife drives it, she doesn’t get the car hot enough to get the cat to work. The Porsche is really coming together!

@JF-4444 Год назад

Quick jacks for the win!

@JBenitez911 Год назад

Sounds amazing! That's going to drone worse than the old one though.

@brennanwhite9872 Год назад

Massive sound improvement plus saved weight and probs picked up at least 20hp. Win win win

@matt13ross Год назад

Wins all around!

@mike16_rodz Год назад

Way better sound bro. The fab speed sounded kinda idk ricey to me. It just didn’t sound like a normal exotic car. With this new exhaust the sound matches the car. Nice 👍🏼

@OfficialYeat Год назад

funnily enough, your not supposed to let the car warm up by staying stationary, as it says in the porsche manual, it was the same for my 986, due to it being a flat engine they recommened you warm it up by driving it straight away and keeping the revs below 3k rpm !

@JohnKaufmann Год назад

You are one happy boy! Great job getting to this stage.

@pcar928fan Год назад

The car looks and sounds fantastic! Well done! You are nearly done with this amazing project! Well done! What a great car!

@YogisGarage Год назад

I have the Fabspeed on my M96 engine and it sounds amazing. Must be a Metzger thing. Honestly though when I put the OEM cats back on it ruined the sound. So they might be fine if you straight pipe them. I’m going to DM you on IG to get more info on those 90 O2 adapters. The new exhaust sounds great! Love that turbo sound!

@Cant_Frag Год назад

my 996TT also sounds like a vacuum cleaner and drones like hell with that same fabspeed exhaust. I believe its the MaxFlo, right? I wanna go to a catless xpipe

@YogisGarage Год назад

@@Cant_Frag that’s what I did. Check out my channel to see me demonstrate the complete Fabspeed setup on my bored out 4.0 996. Including the x-pipe.

@matt13ross Год назад

Mine had high flow cats and it didn’t sound good lol

@YogisGarage Год назад

@@matt13ross Bummer, good thing I didn't waste my money on buying those.

@sutherlacd27 Год назад

@@Cant_Frag I have a 3" catless xpipe setup on my 997.1 turbo. It also has resonators and helmholtz tubes to eliminate the drone. Without cats it will drone unless you have both resonators and helmholtz tubes

@swift__ Год назад

New exhaust sounds killer, leagues better then the old one 🤘🏻🤘🏻

@mattbuckley392 Год назад

Thumbs up from England

@Dr._Swash_Buckler Год назад

Much needed and sounds great! Don’t forget to pick out some awesome tips

@MrEggomylego Год назад

Kinda surprised you didn’t put anti seize on the new exhaust bolts lol

@matt13ross Год назад

Maybe later

@sciflyer67 Год назад

You should use Liquid Wrench or some other penetrating oil. WD-40 is water dispersing. Not the right stuff for rusty hardware.

@SupercarSeany Год назад

Everytime I watch one of these videos I think "that guy has to be from Pittsburgh with that accent" but apparently folks from Maryland sound the same?! Great videos - appreciate the gumption.

@matt13ross Год назад

I'm from neither lol. Central PA.

@SupercarSeany Год назад

@@matt13ross ahhhh I figured it might be PA!

@cristianobuseli7861 Год назад

Yessirrr was waiting on the exhaust vid and this did not disappoint

@marklengal9990 Год назад

It sounds amazing now. Love the turbo sound

@matt13ross Год назад

Does have great turbo noises!

@pangrac1 Год назад

Again excellent choice of music. 👌👍

@KemDIY Год назад

Love your channel so much man. Appreciate all the effort you put into the shots. But I don’t think the overhead drone shots are adding anything. Could pretty much repurpose the same ones every time. And I know they are a pain in the ass to do. What would be so cool though is a go pro shot of the driver POV. Set it and forget it and let it run and use some footage from that. Would be awesome.

@matt13ross Год назад

I enjoy doing the drone shots. Honestly when I do POV, no one watches lol.

@KemDIY Год назад

@@matt13ross makes sense! Especially if you love it. If I had a drone I’d do it too ;) keep up the good work brotha.

@matt13ross Год назад

Thanks! But you're right, the drone shots are a PITA lol.

@sidewayssam Год назад

buy the turbo s tips, similar to the c4 but are shorter, that is what i fitted to mine, looks miles better

@matt13ross Год назад

I'll look into those.

@seanscott7120 Год назад

Great turbo sound!

@matt13ross Год назад

Agreed!

@Chevy3o3 Год назад

Can't wait for the interior video ! Definitely wish this was my car 😅

@Nick-ue5bp Год назад

may be an unpopular opinion but I think you should try to find a set of oem turbo twists, think they'd look sweet.

@pieterverboven4853 Год назад

Agreed, or have the current wheels refinished in silver, not digging the Matt (..) black. And next on the list THOSE HEINOUS TAILS they hurt my eyes :(

@matt13ross Год назад

Tails were not my job. Will be fixed eventually. May change wheel color too. I love the wing though

@pieterverboven4853 Год назад

@@matt13ross I know you already said it in the video, but please pull it forward on the to do list ;) Wing goes with the front bumper imho and I don't have a problem with either of them. Car doesn't have to be 100% OEM obviously, it's already come a long way from your starting point :)

@Amereius Год назад

Sounds great! Sounds a lot less constrained and more aggressive.

@cshevlin Год назад

Sounds great!!!! Turbo sounds are top-notch!

@chadpennington4594 Год назад

Yo that sounds pretty mean! So much better, and I am using tiny headphones that look like they are from 1992. LOL I going to have to put my good headphones on and give her a listen. They always sound better under load though.... Can't wait to hear that.

@RichardWarner-df7dz Год назад

I have the same exhaust but no cats. Wish I had the cats. Cheers.

@MrR6pilot Год назад

Oooooooh, sounds well nice !

@qx4n9e1xp Год назад

Don't forget to mention the DP extensions, and/or running catless is for OFFROAD USE ONLY. You wouldn't want the EPA to come a knockin' & then hit all your cars with fines/tows/violations while they're there. It's one thing to defeat emissions systems, it's a BIG no-no to talk about it & share how-tos with others, especially if you make money off it. (Ask all those performance shops that got raided by the EPA)

@matt13ross Год назад

Yes, this is all just for off road and TESTING purposes!

@mg_streetkandi Год назад

Sounds Spicy..Big Improvement!!!🏁👍🏽

@tzw5116 Год назад

Yes Matt yes!!! I’ve been waiting for this video

@bcut Год назад

@Matt13Ross It sounds heavenly! It sounds glorious! Well done! 🤩👏👏👏👏👏

@boastyy Год назад

Great job man, awesome exhaust. Make sure you install the o2 sensors before you take it out on the road, will mess up the fueling.

@matt13ross Год назад

The post cat O2 sensors don’t affect fueling.

@boastyy Год назад

@@matt13ross Yes your right mate, just the pre cats, totally forgot about that, brainfog day lol.😀

@anthonybrand6137 Год назад

Hi Matt, the 996 now sounds as well as looks great! The stock tips look OK to me, but if you're not happy with them, how about some black oval tips? Having had a 997 Carrera 4s myself, I'm loving this Porsche content! 👍👍

@matt13ross Год назад

Thanks! Yea I'm thinking some simple tips.

@Berti_00 Год назад

I would look and see about getting some tail lights and some more modern headlights. Car is looking so good and fresh. Those will give it a nice touch

@matt13ross Год назад

Eventually

@jakedean8560 Год назад

Wow. Sounds way better. Has that high pitch porsche scream now.

@matt13ross Год назад

Sure does!

@BigDae206 Год назад

I'm diggin this build....I just want to see you go full send and drop the motor and rebuild it...I dont know or remember if you said the actual miles on the car but I believe it's worth it....your already in to deep on it...might as well huh...love this build and your vids...keep up the great work...😊

@paulpalmer8235 Год назад

150k I believe

@sutherlacd27 Год назад

Full engine rebuild requires special tooling for the timing which isn't cheap. To have a shop do the work it's probably going to be $20k for the cost.

@pollatso Год назад

Looking good sounding good 👍

@megabags5524 Год назад

Sounds so much better Matt cheers for changing that awfull exhaust out 👍

@axelarnesson5066 Год назад

Yes dude! Finally new exhaust, suspension up next???

@matt13ross Год назад

Not next but coming, yes.

@snoopeastwood1 Год назад

Liked it after i saw the title

@miketurco5282 Год назад

We need @obsessedgarage to help get a fellow 'Matt' a permanent scissor lift.

@matt13ross Год назад

Need a bigger garage first!

@andygarcia6619 Год назад

There’s only one exhaust for those cars and that’s a Kline exhaust, sounds great and no drone at all ….. tried many off them.

@stephengraham6194 Год назад

Looking and sounding class Matt

@BleezyD Год назад

No more smacking noises, please pick a diff effect otherwise love your vids!

@tycorcoran4490 Год назад

That sounds much better!

@patrickjoseph3412 Год назад

glad you broke up with the zr2, This content is way more enjoyable to watch.

@matt13ross Год назад

Agreed

@996Revival Год назад

Sounds nice!

@austinahlin910 Год назад

Not to be a ass but if you had race headers with a x pipe going to the fab speed silencers it would be a different sound. You have stock headers with prob cell 200 cats and a big silencer going to a straight pipe off stock headers

@matt13ross Год назад

That’s way more work and money than simply getting a new exhaust.

@gregmayled Год назад

Sounds the tits. Currently in the process of cutting apart my fabspeed and putting an x pipe in the middle.

@Weidjeep Год назад

That sounds 10x better and you got some weight shaven off. Every ounce counts.

@IhorHarashchukChannel Год назад

Good job, man!

@duotran7956 Год назад

Thanks!

@matt13ross Год назад

So kind, thank you again!!

@G8rJimbo Год назад

Makes me so nervous because I just had a lot of work done to my 996 including a fabspeed exhaust with headers installed. I pick it up next week.....:yikes:

@matt13ross Год назад

Maybe you have a newer Fabspeed exhaust?

@spanishjohn420 Год назад

sounds mega bro titanium exhaust is defo the way to go

@noelagostonkovacs4475 Год назад

Single big ovals will look perfect on them!!

@kennethe.3901 Год назад

If you ever want to get the lambdas off the titanium, you'd want to put in anti-seize imo

@matt13ross Год назад

I used the little packet of it that came with them

@anthonyi5356 Год назад

Still think your custom job exhaust for hood stack on the 2.8l is more impressive. 😂

@matt13ross Год назад

😂 😂 😂 what a great memory!

@superpug666 Год назад

Awesome vid....as always. I feel like bow it badly needs tips! :)

@idreamofm3841 8 месяцев назад

I picked up an '03 with a titanium muffler-less exhaust, though it seems to have street legal high flow cats and anti-drone tubes on it. The exhaust has its moments but out on the freeway the droning is just so so bad.

@giampy81 Год назад

Big like from Italy

@nolanohana Год назад

Curious if you considered a Fister exhaust for the car. Really enjoyed the bypass with mine. New subscriber here 👋🏻

@yoyomismo5486 Год назад

they say that they are very committed to climate change and pollution but they put a free exhaust on a vehicle

@JohnDoe-jc9tr Год назад

muuuuch better !

@plus790 Год назад

Nice work.

@kainc7136 Год назад

😊just look at it.😊

@patrickduffy6575 Год назад

Ti has its place in aerospace. But, not Road car exhaust. When designing exhaust drone is #1, corrosion resistance is #2, and wall thickness (sound is #3). Weight savings will not be noticed unless you live at the track. Wall thickness makes it sound higher quality. Not saying the jerk that runs fabspeed or his Chinese products are great. But AWE and others made a far superior product in every meaningful way. Ti is for F1 and motoGP. That said, if you like it - that’s awesome!!!

@matt13ross Год назад

I'm trying this one out for fun. It's a budget system and thought it would make a good RU-vid video or two. It does sound great. AWE doesn't make exhausts for these anymore. I had AWE on my 6.2 Silverado and LOVED it!

@cvpuga Год назад

had a terrible day in my day job cause of other mechanic that fubar a honda fit... nice to open my pc and see this video! tks

@starrguitarworks Год назад

Sounds like a proper Porsche now. Great choice.

@stuf3804 Год назад

Got a Cargraphic exhaust on my 996 Turbo - think it sounds great although not Ti its only SS

@matt13ross Год назад

I've never heard of that one.

@peterborak3695 Год назад

Did you put this exhaust on without a drop of antiseize on any of the slip joints or bolts?

@matt13ross Год назад

Yes

@peterborak3695 Год назад

@@matt13ross why do you hate yourself? Knowing that engine, the exhaust is going to need to come off soon enough, putting it on dry is how everything seizes up. Just put a layer of copper antiseize on the slip joints and bolts. It’ll smoke a bit at first, but you’ll be able to take the thing apart.

@matt13ross Год назад

Not a bad idea. I've never had good luck with any sort of product like that on hot exhaust parts though.

@sutherlacd27 Год назад

@@peterborak3695 I've taken my exhaust off twice since installing it without any antiseize and it hasn't been a problem at all.

@chriscunningham158 Год назад

Been watching since the E36 build. Dig the videos. I would ditch all the sound effects though, you dont need them and they are just a distraction, not adding anything good.