No video :(

Installing a Battery Backup Sump Pump and Radon Sump Dome

Подписаться 1,1 тыс.

Просмотров 33 тыс.

50% 1

I show you how to install a Wayne ESP25 Battery Backup Sump Pump, and a Jackel Original Radon Sump Dome. There are few things that can destroy your basement faster than a failed sump pump. Spending a weekend installing a Wayne ESP25 Battery Backup Sump System is a DIY project that can help you sleep better at night. Also, an uncovered sump pit can be dangerous and ugly. I'll show you how to install a Jackel Original Radon Sump Dome that looks great, and keeps everything air tight and sealed.
Ready to buy? Use my affiliate links below. It gets you something you want (maybe need?), and for no additional cost to you, it helps support my channel! Thanks.
Things to install.
Jackel Sump Dome: amzn.to/3waFYGB
Wayne ESP25 Backup Sump: amzn.to/3yiOdCb
Wayne Battery: amzn.to/3vRGRFf
Zoeller M53 Sump Pump: amzn.to/2SJPdyX
Zoeller Check Valve: amzn.to/3ojSfpo
Tools you'll want.
10,000 lumen LED work lamp: amzn.to/3u2PhaM
Impact driver (Milwaukee): amzn.to/3buaCD1
Hole saw kit (Milwaukee): amzn.to/2QlhhYC
Hammer drill (Dewalt): amzn.to/3bqAzTV
Recip saw (Milwaukee): amzn.to/3ePbx2U
Shop vac (Dewalt): amzn.to/3eP9QSY
Supplies you might need.
Concrete Screws (1 1/4"): amzn.to/3bubhV1
PVC primer and glue: amzn.to/2S23G8Y
Battery Clamps: amzn.to/2SVD0rd
Zip ties: amzn.to/3eSFDCM
Evolution DIY Website: Coming Soon!
Royalty free music featured in video.
Royalty Free Music: www.bensound.com
#WayneESP25 #SumpBackup #Radon #SumpCover #ZoellerM53

Опубликовано:

26 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 46

@diydoc Год назад

Well done. I don't like using dome lids - even for radon covers - because it prevents floor water in the basement from draining into the sump.

@marekj3124 10 месяцев назад

I have been using Zoeller pumps for 20 years Good pumps last forever, but the switch is always issue. You got a change it every couple yearI switch to Wayne pumps now Look like they’re last longer no issues so far Good job I will do the same thing in my basement

@EvolutionDIY 10 месяцев назад

I have the same experience. It always seems the switch fails on my zoeller pumps. Usually they fail “on” for me, and I catch it before the motor burns up. I may change to use the electrical sensing types switches in the future to eliminate the mechanical failure aspect. Thanks for the input.

@FridayNightArcade 6 месяцев назад

I keep thinking about putting this type of cover on, but one time we had a pump failure in the middle of winter when all of the snow melted at once coupled with one of the drainage pipes being backed up / frozen and water was rising rapidly in that corner of the basement. I was able to just rip the dingy silicone/foam cover off quickly and get to the pump so I could make a repair. If I would have had to fiddle with something like this, way more water would have gotten into the basement. Cool video though.

@EvolutionDIY 2 месяца назад

Yeah it does make replacing the pump more difficult. My hope is the backup system would operate long enough for me to pop the cover off, and replace the main pump…which reminds me, I need to buy an extra zoeller pump to keep on my shelf in case of emergency!

@MrSoulMonk Год назад

Great job and well documented. I have a basement watchdog battery backup pump and it is all plastic. It looks like the Wayne backup pump is beefier and appears to drain water pretty well. I might switch my battery backup to that. Years ago, I had the float switch on my Liberty pump malfunction and the pump kept running. There was a company that made a near field electronic water sensor/switch called Levelguard. It replaced the pump float and I bought a pump without a float switch and connected it to the piggy back on Levelguard. This circumvented the float issue. I believe that company has since closed doors but you can still find Levelguard in places like Grainger. I hope the battery backup is still working well.

@CsteinOSU Год назад

I have considered changing to a water sense type float switch like level guard. I have never had a motor burn up, it’s always the float switch, so I feel like levelguard might fix that for me. If I install one, I’ll make a video of that too! Thanks for sharing.

@digitalnorbs 2 года назад

Nice video! I got the cover, just waiting for a long weekend to do my install

@EvolutionDIY 2 года назад

There is just never enough long weekends. Good luck on the project!

@shopart1488 2 года назад

Nice clean job. Looks good.

@EvolutionDIY 2 года назад

Thanks. I really like the way this dome cleans up the look of the sump pit.

@i82much2day Год назад

Nice video, I bet it involved a full day to do.

@najeebahmad3103 3 года назад

Thanks for a really informative and thorough video!

@EvolutionDIY 3 года назад

No problem. Thanks for watching.

@ifoleyienationchannel4779 5 месяцев назад

Excellent video. Thank you

@EvolutionDIY 5 месяцев назад

Thanks. Your welcome. Hope it helped you somehow, or gave you some ideas.

@ifoleyienationchannel4779 5 месяцев назад

@@EvolutionDIY 100%. Unfortunately I’ve discovered my radon issue after renovating my basement. So I have to cut out my subfloor to attach the sump dome to the actual concrete slab. May also have to totally replumb my sump outtake. Oh well. I’ll start with sealing the sump and see how my radon level changes then decide on installing a fan.

@vicpinto1970 2 года назад

I would have used a flange inside the dome instead of a coupling. Would make for easier maintenance down the road.

@ttables2007 Год назад

Great video!

@brianw6645 Год назад

I was frustrated with the plastic push nuts as well. I wish they would have used a well nut design. It would be much better and no pushing the nut into the sump pit.

@EvolutionDIY Год назад

I had to google what a well nut is, now I get it. I like your idea of using well nuts for the acrylic window. I think I’m going to do that.

@brianw6645 Год назад

@@EvolutionDIY Also, use weather strip instead of silicone caulk so you can easily remove and reinstall.

@brianw6645 Год назад

@@EvolutionDIY If I eventually get tired of the plastic press-fit nuts falling through, I may see if I can find a well nut that fits the existing square holes. If I find one that works, I'll report back here with the size so you can try it.

@brianw6645 Год назад

@@EvolutionDIY I just finished installing an acrylic window in my lid. It turned out great. I could send you pictures and details if you like. Not sure how to send a message to someone via youtube.

@kevingebert4316 Год назад

Curious if when you say your pump switch went bad and stays on, did it pump water endlessly or eventually run dry? I've got that same lid on with a dual setup and no view window. Thinking I need to add a window. We had this setup put in before buying the house so the previous owner had to install and mitigate the Radon. Being over 2yrs and runs as often as yours, I wonder if mine has run its course and just stuck on.

@migdaliadiaz8830 2 года назад

instead of acrylic use a 4 inch clean out then you can get you hand in pit

@EvolutionDIY 2 года назад

I like that Idea I might just do that.

@brianw6645 Год назад

I'm doing the same. Cutting out that quarter panel and overlaying a triangular piece of acrylic. If you use well nuts, and use weather-strip instead of caulk, you can easily remove the window to get your hand in there. Also, should have slightly more room than just a 4-inch clean out (more room for both viewing and getting an arm in there).

@mcoteg 2 года назад

How many hours do you get before battery drains?

@brianw6645 Год назад

My setup is nearly identical. My inflow of water into the sump is also very similar. In other words, my sump pump runs almost non-stop in the spring and after it rains. I can only get a few hours out of the backup when the ground is wet from rain.

@brianw6645 Год назад

Nice job. I'm wondering why you drilled a hole in the pipe below the check valve on the backup side. My setup is similar to yours, but I didn't put a hole in the pipe. Wondering if I should do it.

@EvolutionDIY Год назад

The hole is to avoid the pump becoming “air locked.” You can Google it for more info. The instructions that came with the zoeller pump I have (and the backup pump) both say to drill this hole, so I always do.

@brianw6645 Год назад

@@EvolutionDIY Thanks. I've never had a problem with it. I'll check into it.

@EvolutionDIY Год назад

@@brianw6645 I also have never had an issue, and I don’t actually know anyone that has had this airlock issue. I was just following the instructions. 🤷‍♂️

@brianw6645 Год назад

@@EvolutionDIY I have the 1/2hp Ridgid pump. I couldn't find anything in the instructions about air lock.

@kenterry9396 2 года назад

Where can I purchase that dump basin?

@EvolutionDIY 2 года назад

Hi Ken, there is a link under the video in the description to the sump dome. It actually links to the one with a small acrylic window in it so you can see into the sump pit if necessary too.

@stacyburdick-denham9615 3 года назад

How large is the basin in this video?

@EvolutionDIY 3 года назад

The basin in this video is 18”. I didn’t have much trouble fitting both pumps in it. Any smaller and it might have been a challenge.

@midas617 Год назад

where's the water coming from? 🤔

@EvolutionDIY Год назад

So my sump pump pumps out to drain tile, and then out to my pond. Turns out that tile was filled with tree roots resulting in recycling the water back to the sump. Had the lines jetted and it has helped a lot. I still get water, but not the constant cycling I was getting. I assume the water I get now comes from the foundation drains around the basement walls.

@avadakedavra3579 2 года назад

Back up pump should always have its on discharge.

@EvolutionDIY 2 года назад

Yes I agree. Ideally the backup has a completely separate discharge, running out of the house separately, and discharging to a different area. In this case I was not able to do that. Also, I was mainly trying to protect against power outage, and main pump failure (not clogged or frozen discharge), so I just chose to share the discharge with the main sump pump.