No video :(

Installing a Diva Smart Dimmer for the Caséta system in a wired 3-way application

Подписаться 21 тыс.

Просмотров 39 тыс.

50% 1

Welcome to our channel! In this video, we provide a comprehensive guide for installing and programming the Diva Smart Dimmer DVRF-6L for Caseta systems. Whether you're a DIY enthusiast or a professional installer, this video will walk you through every step of the process.
Sections Covered
• 3-Way Installation with Existing Switch: Discover which wires coming from the wall need to be connected to the DVRF-6L and the existing switch at the second location.
• 3-Way Installation with DVRF-AS Accessory Switch: Determine which wires from the wall must be connected to both the DVRF-6L and the DVRF-AS accessory switch at the second location.
• 4-Way Installation with DVRF-AS Accessory Switch: Learn which wires from the wall need to be connected to the DVRF-AS at the middle 4-way location.
For DVRF-6L single pole installations, check out this video: • Installing a Diva Smar...
• Product Settings: Discover how to adjust trim settings directly on the DVRF-6L dimmer. Maximize energy savings and optimize performance with these settings.
We offer a comprehensive knowledge article that addresses installation questions with the Wiring Wizard, settings adjustments from the Lutron App (Smart Hub required) and common issues such as lights not turning on, unresponsive Pico remote controls, and flickering bulbs, along with probable causes and recommended actions for troubleshooting:
support.lutron...
Whether you're a homeowner looking to upgrade your lighting control or a professional installer seeking guidance, this video has the information you need to successfully install and program the Diva Smart Dimmer DVRF-6L for Caseta systems.
If you found this video helpful, don't forget to like, share, and subscribe for more tutorials and troubleshooting guides. Thanks for watching!
#Lutron #LutronElectronics #LutronCaseta #Caseta #SmartHome #InstallationGuide #Troubleshooting #DivaSmartDimmer #DIY #HomeImprovement #TechTips

Опубликовано:

18 сен 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 33

@DarylCrow Год назад

Very helpful, would have saved me a lot of time if 3 way installation was included with the Diva smart switch as I spent an hour trying to figure out why the 2nd switch no longer worked. I couldn’t find instructions on the product page either, only instructions for single pole. Would be helpful to add this video to the product page for others (unless I just missed it).

@Nunya.Bidness Год назад

Same issue I had. Add in they don’t label the wires, just tell us what each one is??

@joshuamarchner1606 Год назад

Agreed, very helpful video but I wish the products came with schematics for 3-way in addition to single pole.

@vangeles11 Месяц назад

I just got mine. There’s a part in the included instructions that mentions replacing existing switch with the diva dimmer and adding a jumper wire to the second switch. Maybe it was added recently?

@callibretto101 3 месяца назад

I am not sure if my led lights are dimmable, but I also really only need them at full brightness. Will this switch work with the lights if I leave the dimmer at full brightness?

@timp3257 10 месяцев назад

Hello. I just purchased the Diva Smart Starter kit. I have two 3 way switches that go to a kitchen light. I changed out the first switch with the Diva dimmer wiring exactly as described early in this video. It works perfectly. I went to the second 3-way switch that's the original mechanical non-smart switch and it works without doing any rewiring as shown here with the yellow wire. What does this yellow wire accomplish if my lights work on the second switch without rewiring it? They go off/on just fine.

@Lutron-Electronics 10 месяцев назад

Our Technical Support team will be able to best help with recommendations for specific scenarios. You can reach them at 1-844-588-7661 or support@lutron.com. We’ll talk to you soon!

@jsubound2007 2 месяца назад

@@Lutron-Electronicsthat’s a lie. Whenever I call for assistance or just to have a couple of questions answered, I’m always routed to an agent who speaks 17% English with also a no patience having nasty attitude! And it’s always the same agent. Not only have I gotten his voice tone memorized, I can hang up immediately, call back, go through the automated system and still get connected with the same guy. So word of advice to anyone call for tech support, never call after 10pm CST cuz your call will be routed to a foreigner who doesn’t speak English and is rude af

@Kelvin.B Год назад

Is it possible to have each outlet with a diva dimmer?

@alexm777 Год назад

I have 5 switches controlling family room lights. Can I just but one diva and connect it on one of them and control the dimming and on and off with the app if I do the jumper on the other switches?

@Lutron-Electronics Год назад

Hi, Alex! Our Technical Support team will be able to best help with recommendations for this specific scenario. You can reach them at 1-844-588-7661 or support@lutron.com. We’ll talk to you soon!

@laddcampbell2833 Год назад

If I use my Caseta app to dim the lights, will the slider on the wall plate automatically/physically adjust accordingly?

@Lutron-Electronics Год назад

Hi, Ladd! The physical slider will not move along with the app.

@CameronL Год назад

If you use an existing mechanical switch with the diva will both switches be able to turn the lights on and off? The mechanical switch needs to remain always on for the diva to work?

@Lutron-Electronics Год назад

Hi, Cameron! The mechanical switch does not always need to be left on. You will be able to dim by using with the Diva smart dimmer or turn on and off from the mechanical switch. When you flip the light on from the mechanical switch, it will go to the level of slider on the dimmer.

@adamrotman 10 месяцев назад

My existing wires are all the same color (black). On the existing switch, how do I identify the wire that I connected to the blue wire on the Diva?

@Lutron-Electronics 10 месяцев назад

Our Technical Support team will be able to best help with recommendations for specific scenarios. You can reach them at 1-844-588-7661 or support@lutron.com. We’ll talk to you soon!

@petersonfamily6223 Год назад

Is the Accessory Switch any physical 3 or 4-way switch, or is it another Smart Switch? What is the Model number of the Accessory Switch? Thanks

@Lutron-Electronics Год назад

The accessory switch would work with 3-way or multi-location (up to 10). You can learn more about the Claro Accessory Switch (DVRF-5AS) here: www.casetawireless.com/us/en/products/dimmers-switches

@hi-ccowboy7983 Год назад

@@Lutron-Electronics any idea when the accessory switch will be released? I have a four-way to re-do and you guys are leaving my cash on the table. 💯

@coreyenfield7595 Год назад

@@Lutron-Electronics link takes you to an image that says "Coming Soon"... when is the expected release date for the Claro Accessory Switch?

@kaohinh Год назад

Following…

@zachvlasuk Год назад

They are available now. I have three of them. They work as intended.

@mikedeanb Год назад

I successfully wired my existing 3 way switch and a Diva dimmer. But I wonder, is the jumper wire necessary? Could I have left my 3 way switch wired the way it was by the electrician who initially installed it? It had been on a 3-way with a regular dimmer prior to this. If the jumper is necessary, why is it?

@Lutron-Electronics Год назад

Our Technical Support team will be able to best help with recommendations for specific scenarios. You can reach them at 1-844-588-7661 or support@lutron.com. We’ll talk to you soon!

@jsubound2007 2 месяца назад

Same question I had/have and technical support is no help whatsoever!!

@Jarut Год назад

@Lutron Electronics In your Advanced Installation Guide Page 44 says to connect the tagged wire to the Red wire on the Diva. In the video you connect the tagged wire to the black on the Diva. Can you connect the tagged wire to either the black or red?

@Lutron-Electronics Год назад

Yes with the DVRF-6L you can connect the tagged wire to either black or red. Making sure whatever wire is on the red wire and the blue wire end up on the jumper together in the mechanical 3-way is key.

@Jarut Год назад

@@Lutron-Electronics So whatever wire you attached to the blue wire on the diva is attached to the brass screw on the mechanical switch. The tagged wire and remaining wire you put together with the jumper to the black screw on the mechanical switch?!?!

@Lutron-Electronics Год назад

@@Jarut Our Technical Support team will be able to best help with recommendations for specific scenarios. You can reach them at 1-844-588-7661 or support@lutron.com.

@jsubound2007 2 месяца назад

Word of advice to anyone calling for tech support, never call after 10pm CST cuz your call will be routed to a foreigner who doesn’t speak English and is rude af