Installing a pool sand filter. Pool series #2 Ep  

From a simple ice maker video I found couple years ago, and around 20k subs at the time, to a full on entire pool setup, and 3k shy of 100k subs, what a journey Drew. I'm glad you are feeling better and healthier, take care brother.

Oh ya almost ready for the pool party now just waiting for that zip line 🤔

Thank You..I am an experienced above ground pool home owner. The best filter type is DE.. I ran sand filters after that but the back flushing & possible murky water from filter always leaked into the pool. I am a Believer now in the professional cartridge filters. 75 to 100$ replacement once you bought the 600 to 750$ filter. They are easy to remove, wash out & clean. You would be replace filter as needed.. Plesse look at when you get tired of replacing sand down the road. Love your videos. Keep Up The Good Worm.

Glad your not so old body is feeling better and your back to teaching because I for one learn something new with everyone of your videos

Looking very nice. Getting the right temperature to be swimming everyday.

Hi, Andrew! As always you have provided us with valuable information and instruction. Thank you for your hard work. I pray your back is continuing to heal.

Another awesome video. Thanks for sharing. 🤠

I like the piping setup with the valve on the discharge side for water features. I set mine up just like that with four unions to remove supply and return for winterizing (cap open ends for dirt dobbers). The return to pump tee valve I used to couple the vacuum hose which worked better than skimmer basket attachment. One more thing I didn't see on yours is the backwash discharge off the multi port valve. Looks great!

Very informative and your setup is WELL THOUGHT OUT - you da man LOL!👍👍💜💜💜

Great video series.

As one would say in the UK "You did swimmingly old chap!".... :-)

Great Job Andrew I'm impressed

You should do a video on dry pour concrete. They seem to be pretty popular.

Place is coming along very nicely. With the pool addition your getting ever closer to really being able to relax a bit and enjoy the fruits of your labors. Im a plumber. I dont know where you got your information about a 90 degree elbow reducing pressure but that does not happen. Pressure is pressure, its constant, no matter what fitting you use. Even if you increase or decrease the size of the pipe or fitting, the pressure will remain constant. The volume, GPH or GPM, will only be affected if you decrease pipe size.

Great info Andrew, really enjoyed it!

Ok Andrew.... Thoughts on the overflow... I'd suggest putting on a coupler that would work with your fire hose.... Both of these items wont be used that often, but it would give you an easy way to connect a hose that you could point in any direction away from the pool, and use something that you already have and wouldn't have to purchase something new. ..

Excellent job Andrew! Ruger asks where's my doggie diving board?

Glad you got this hooked up and running! You guys are going to love having this pool available to you to enjoy/relax. On a separate note in regards to your previous video, lift with the legs and not the back and don’t bend and twist at the same time! Stay healthy brother. See you on the next video.

Beautiful pool Andrew!! Love Love your videos 👍👍❤️❤️🇨🇦

Outstanding explanation

This video was very helpful.

Good video. Very informative and simple. Thanks man

Now that I watched the entire video, I wanted to say it is well done. I would make sure to mount the pump so that the bottom part is shielded from rain. If not, the bottom could rust out and destroy the motor and under housing. I would further protect it by installing a sump pump so in case it rains a lot, it would prevent the water from flooding.

Good day all.

As always very clean and neat setup 👍

Ive had an above ground pool for a out 10 yrs. Just upgraded to a much nicer pool this year. I will need to look into an ionizer. Thanks for the great content, Hope ur feeling better!

dive into the plumbing ! LOL

Great video Bud 👍👍

Great information on the sand filter installation. That pool ill be very enjoyable. Has Ruger been in the pool yet?

👏👏👏

I hope your back is getting better. Now, about the pool, where's Ruger's access ramp?:)))

Nice video! You may want to install an open outdoor shower next to the pool, so swimmers can wash off sun tan lotion, makeup, hair spray, and all of the other stuff that builds up in pool filters. I've had a pool -- let me tell you, baby oil is your pool filter's enemy. Baby oil (mineral oil) is not water soluble. Have fun!

Looks operational now. When’s the pool party? Nice set up

Andrew I didn’t see Cash in the pool, Another great video will there be a live today?

Is there a list of the materials that you used? Like the glue and what type of 3 way valve?

Looking great :) what size is the pool and is Ruger going to be swimming with you? I love that you are putting a fence around the pool because you just never know. Glad to see you are moving better but remember don’t push yourself:) tfs and God bless:)

Where I live you would have to have the pump and filter INSIDE the pool fencing, because a child could climb up on the plumbing and jump/fall into the pool and drown. Also the outlet valve on the inlet to the pump is not really needed. During heavy rain, the pool level can be lowered by giving the filter an extended back flush. That is all I ever did when I had a pool.

Will you be building a solar pool heater?

❤❤❤

I was going to ask about the chemicals in the pool affecting the grass, but you covered that later in the video. I do wonder, though, if you would think about trenching the overflow pipe underground with one of those ground level covers that pop up to allow water dispersion like you did on your gutters. Just for a more aesthetically pleasing look. Great info!

Andrew, are you required to use primer on your pvc before gluing in your area? Here we have to, to ensure the pvc properly melts and welds itself to each other

Couple years of tractor payment then Pool 😅

Thx sooo much

Thank you for posting this. Very informative. We have the same kind of pool (ionization). Yet, we have this yellow filmy stuff down in the drain coming from the skimmer basket. I did find that someone had improperly placed the filter basket back into the part with the clear lid. All kind of bugs, pinstraw, etc., were coating that filter basket. I can't get my water clean. It seems to have sludge in it. It's about to drive me crazy. Any ideas on what to do? Plus, if we install the outlet to prevent dirty water from going into sand filter, does the pump have to run on waste? Another element, is last summer I noticed dirty water occasionly coming into the pool from the pump. Please help.

A pool should never over top the walls, the water level will never get higher than the skimmer itself as it pours out of the hole at the top. I would still have concerns about the foundation but really only in the immediate area of the skimmer. We always packed the used up sand and river rock around the foundation of the skimmer to prevent it from washing away. I would also recommend a ring of pea gravel or lava stone around the base of the pool for the same reason including splashing from inside the pool, as well as weed control. Man, sand filters are nice at cleaning but they are a bear to replace the sand. You likely have the equipment to lift it and flip it to pour out the sticky, wet sand. I've had to do it a few times by hand and it is a pain, opening the plug, the top and running a hose to irrigate and break it up, rolling it off the base to its side to continue the process while it still contains 100+ lbs of sand. It's not a fun day. Keep an eye out on your connections, even a pin hole in your lines from the skimmer back to the pressure port can inject a lot of air in your line, cause pump cavitation and shoot foam into your pool. Any time you service the threaded connections apply some PTFE pipe dope to seal it up. I've had joints so tight I damn near cracked the plastic but they still leaked through the helical path of the threads. Most importantly, enjoy your pool. Have a good one.

Sorry for the Late Comment Andrew, Camping for 9 days back on Memorial weekend sure threw off my You Tube Schedule.... Doesn't the Horizontal PVC from the Pool negate the Climbing issue ? back in the 80's I had all My pool stuff at the side of the Garage wall and ran the pipe under ground to the pool then up and over the top. 4 in total. 1 set for the Filter and the other for the Solar Heater which was 600 " of 1" Black Polly in 2 300' Loops on the garage roof. Mike M.

Man I never knew about the copper silver ionizer! Only thing I may have done different than you in this would be zeolite sand and also prewash. I say that because I have zeolite sand or had in my pool until I took it down last year due to storms messing it up. Im going your route on my next pool setup for sure with ionizer. also look into peroxide instead of the chlorine tabs or shock. I used that in my salt if things went crazy and it really works damn good and the benefit is more oxygen in water vs chemicals

👍💞

Love ur videos, what size or model is that sand filter unit and ionizer? Thanks

👀

I've been happy with our salt system, but it does lead to other issues. Rust being the most concerning. I'm interested to see how your Ionization System works for y'all. I might have to make the switch someday. Take a picture of the top of your sand filter so you know what the label says. It doesn't take long and the label will be faded to the point that you can't read it and I couldn't remember which setting was "waste" when the time came. Filter, Backwash and Rinse I had down, but which one is Waste? Manual and Paint Pen solved that issue. When I re-plumbed everything last year, I purchased a one of those Craftsman 4-ft x 2-ft Resin Storage Shed's from Lowe's and ran the two lines thru the back wall of it. The top opens and I bought a second prop bar so it is supported on both sides. On extremely hot days, I open the top; but it really doesn't need to be opened. The inside doesn't get any hotter than it is outside even when it's closed and it sure has kept my pump, filter, and salt system components in much better condition than sitting in the sun 12/7/365. Since you think of everything, I suspect you already have a plan for a little roof or some type of cover over your equipment. Hope your back is getting back to normal... I helped my brother-in-law carry a new Blackstone grill up stairs yesterday and now my typical sore spot under left shoulder blade is taunting me... "Hey Old Fart... so you think you can just manhandle a grill like you're 30 yrs old again? HA!"

Nice, but not sure why you didn't opt to go with a DE filter that can filter to as small as two microns, vs sand filters that cannot filter below 15 microns.

Why does that filter remind me of a type ( I think German) Hand grenade?

Thx drew. These paper filters are a joke.