Next Level's Jason Blair walk us through the installation of a tether on a Polaris Pro RMK 850 "Any action you take upon the information on this RU-vid Channel or website is strictly at your own risk.”
Sweet video but I do not understand how they sell their mountain sleds without this. You spend as much as you do on these sleds and they're sly enough to gouge even more out of you for a safety feature that should be standard. Especially on the mountain sleds.
@@ERVDSR the des system is great n all but Ive had buddys with starting issues here in Alaska where we still ride at -35f, we deduced that the cold weather scrambled the key somehow. We got em started eventually but it was kind of irritating as my 08 nytro 153 mtx was idling contently as we heated the des keys to defrost them.
Thanks for sharing, glad I watched your video. Polaris instructions has you taking so much apart you don't need to if running the new Magnetic tethers. Thanks, Gary
I just did this like you illustrated in the video. Maybe 7-8 mins work. If you actually look at the instructions Polaris has you pretty well scrap all the plastics. Great job on this video! Keep them coming.
Just say yes to tethers. Apart from not having a track shred your back, who hasn’t had the sled go one way and land on its throttle while you go the other, stuck in a hole while your engine self destructs in the distance.
Great vid, wish I saw it before I put my tether on. The Polaris instructions are way over the top. I put the MUNSTER throttle on so the tether became mandatory since I removed the throttle safety switch. Removing that washer is also a great tip. My tether didn’t work right and I thought my sled was crapping out on me. The switch doesn’t get pushed down enough in factory form, I added a small round head screw in the rubber cap to push the switch down more.
That's cool, I use the washer and I take a round screw and screw it in my tether lol, gets me full contact, never seen ur way, neat learnin how other folks do things.
If I don't have a cool notched pair of plyers can I just use a screw driver or needle nose to remove those darts? Just bought the magnetic tether today.
Do you see any reason why this tether won’t work as a kill switch for an old 80’s GM vehicle? I think if I just cut the plastic clip that marries into the snowmobile wire harness and sodder the wires into my ignition wires on my steering column it should work just fine. Thoughts?
Make the volume of your intro and speech volume the same please. I was wearing headphones and turned it up to hear you and then almost blew out my ear drums when the intro started.
The tether plugs into a sealed connector that shouldn't let any moisture in so its not 100% necessary but it definetely wouldn't hurt to adding a little dielectric grease to the connectors.
We are working on getting the audio perfected on future videos, it usually sounds fine on the computer speakers but different on headphones. Thanks for bringing this to our attention.
