No video :(

Installing An On-Board Air Compressor For My 3RD Generation Toyota Tacoma!!

Подписаться 355 тыс.

Просмотров 102 тыс.

50% 1

It's time to finally be able to air out for the trails!! Today I install a built in air compressor from Tacoma beast on my 3rd generation Toyota Tacoma! This is an ARB brand with a single motor and hopefully this step by step video will help you install one and be ready for the trails! The hardest part was finding the spot to go through the firewall, but after that the wiring was fairly easy. The kit comes with detailed instructions as well. I figured the best spot to have this out of the way was underneath the hood as I will have easy access to it. Hope you guys enjoyed this video and the future adventures to come on the trails!
Air Compressor Mount:
• The MOST USEABLE MOD F...
brosfourrspeed...
Installing An On-Board Air Compressor For My 3RD Generation Toyota Tacoma!!
Our Equipment:
- Sony Alpha a5100: amzn.to/2Pt5pCS
- GoPro Hero 8: amzn.to/2Qvg5Q2
- GoPro Hero 7: amzn.to/2NHSyKz
- DJI Mavic Pro: amzn.to/2HPjG6H
- Apple Imac 21in: amzn.to/2NIssa6
Music By: Joakim Karud
/ joakimkarud
Spring Light
www.epidemicsound.com
#toyotatacoma #toyotatrdoffroad #tacomabeast #aircompressor #offroading

Опубликовано:

26 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 136

@loveloveiloveuforever7247 2 года назад

*Great air pump **MyBest.Tools** Faster than my old plug in pump and twice as handy without having to drag the cord around.And it works with my existing Ryobi drills battery.*

@BrosFOURRSpeed 2 года назад

Make sure what?

@venvea6845 4 года назад

David Spade drives a Tacoma?! Nice.

@gooffy89 3 года назад

Lmfao

@terrencehargrave2463 3 года назад

I saw your comment before the video loaded, BUSTED up when I saw

@tlo8646 Год назад

Got the compressor from Callahan Auto Parts

@mitchellwoolstenhulme6706 Год назад

SUPER HELPFUL VIDEO. After about 80x watches I got my compressor installed this week relatively pain-free! However finishing the wiring through the fire wall was not as easy as advertised, albeit I was working solo. Thanks for the detailed walkthrough and explanations. Cheers!

@BrosFOURRSpeed Год назад

Glad you found this video to be helpful! Wiring is always the trickiest!

@parttimedirtbag 3 года назад

Our install was a bit different since we drive a Frontier, but your info about the fuse adaptors was super helpful since we couldn't find any info on how to do this on a Frontier. Had to do a little figuring out ourselves but this was an incredibly helpful start.

@BrosFOURRSpeed 3 года назад

Awesome, glad it was helpful! I've used this quiet a few times, I love having it!!

@parttimedirtbag 3 года назад

@@BrosFOURRSpeed we’ve had ours installed about a month and I use it at least once a week for the days I’m driving in sand for work it’s been a game changer

@BrosFOURRSpeed 3 года назад

@@parttimedirtbag Very cool! It's definitely a must for leaving the pavement!

@PsyChAoS_ 3 года назад

About bloody time there is a video that actually shows the wiring good work

@BrosFOURRSpeed 3 года назад

Glad you found it helpful! What are you putting this on, a tacoma!?

@PsyChAoS_ 3 года назад

A holden rodeo. Im in australia. I wish i had a tacoma tho haha

@BrosFOURRSpeed 3 года назад

@@PsyChAoS_ Oh cool! Do they have the Helix there!?

@PsyChAoS_ 3 года назад

@@BrosFOURRSpeed hell yea they do. There awesome

@jlrecoder1 4 года назад

Great video guys! Ordered the fuse adapter and should be installing next week

@BrosFOURRSpeed 4 года назад

Nice! I use it a good bit, one of the best mods I've done!

@SynteconlineAuSupplements Год назад

perfect well priced

@BrosFOURRSpeed Год назад

It was a great tool to have!

@MsRotorwings 3 года назад

Thanks for the detailed installation. Subscribed. Except for the lighting it was a perfect video.

@BrosFOURRSpeed 3 года назад

Thanks for the sub! We have bought new cameras since then and have an led light we use now in low light situations!

@rickyloganjr.2362 5 лет назад

You two are really something as I'm truly amazed by the level of knowledge you both have about cars. As I watched this video I was captivated by the way you two worked on this new mod then knowing what's what. Excellent 👌.

@BrosFOURRSpeed 5 лет назад

Thanks! It was our first time doing a mod like this too! Went pretty smooth and absolutely love the outcome

@davepeace4037 5 лет назад

Good video. Very detailed with what wire ends go where and what each of them do.

@BrosFOURRSpeed 5 лет назад

Glad it was helpful!

@minnesotaco8880 5 лет назад

Should have put switch under hood u have to hook up hose any way n then u don’t lose room in truck for light switches where they should be

@BrosFOURRSpeed 5 лет назад

Thats actually not a bad idea. I didn't even think about that

@DoriJonah Год назад

you look like the cool version of david spade

@BrosFOURRSpeed Год назад

Lol that’s cool to know!

@arielrosado941 3 года назад

I love your videos i cant wait to upgrade my Tacoma i have a question adding all those led lights and the compressor do yo have to upgrade the battery

@BrosFOURRSpeed 3 года назад

Glad you like the vids! I havent had an issue with my battery. I always have the engine running when I use the compressor tho

@rlmast 2 года назад

Dude I swear you are like David Spades son..

@BrosFOURRSpeed 2 года назад

I've had that comment multiple times! I'm not sure if that's good or not lol

@rlmast 2 года назад

@@BrosFOURRSpeedso um yea if you can just spit in this cup so I can go get a DNA test done.. That would be great lol.

@BrosFOURRSpeed 2 года назад

@@rlmast Lol, I’m not related in anyway!

@lukestoyz 5 лет назад

This is the exact pump I’m going to purchase. It’s good to know what it takes to install before I purchase it. Good video

@BrosFOURRSpeed 5 лет назад

Glad to help! Tomorrows video shows it in action. Super happy with it!

@bradgt5130 5 лет назад

lukestoyz don’t have this one, but I have the twin model. Love it, if you don’t have the ability to make your own mount. Sleep off-road makes a Underhood mount, and expedition essentials makes a bed box mount. So you got options. Made a small video of my set up.

@dwaynepreller2372 3 года назад

Do u have been lock wheels to air down

@BrosFOURRSpeed 3 года назад

I don't. But I've never had an issue and I've gone down to around 15psi

@horaciohdez7491 5 лет назад

What measure is the nut that you put where you hold the base?

@Richardaaguilar43 2 года назад

Would this be small enough to mount in the storage box under the back seat?

@BrosFOURRSpeed 2 года назад

Definitely behind the seats, but it might be a bit bulky underneath the seat. I have seen people put them in the storage compartment in the bed, but I think a good bit of trimming is required for that!

@trialnterror Год назад

I have this compressor, it’s hooked up to my arb air locker in the rear. Am I able to hook up a air compressor for filling up my tires? If so how or where would I find the info?

@BrosFOURRSpeed Год назад

How is the compressor attached for the locker? Is it a normal hose? If so, you could disconnect it, put it a hose like what I showed and go between the two.

@christopherrivas4403 5 лет назад

It’s David spade!

@oceanious 5 лет назад

looks, great friends

@BrosFOURRSpeed 5 лет назад

Thanks!

@peteg7446 5 лет назад

Nice clean install 🖒. Looking at the same ARB for my ZR2.

@BrosFOURRSpeed 5 лет назад

Peter Garcia Thanks! Tuesday’s video will show the completed project in action. Highly recommend it!

@deel.4982 5 лет назад

I’m facing the same problem like others: the ARB won’t turn on and system shows “pre-collision system malfunction”. Followed the video instruction, please advise.

@BrosFOURRSpeed 5 лет назад

You are seeing "pre-collision system malfunction" on the truck dash screen? If that's what you mean, I don't think that would be affected by the compressor.

@marksetters931 4 года назад

I followed the same and having the same warnings.

@esanchez5994 4 года назад

Thanks for the install video. Would you happen to have a link for the fuse connector?

@BrosFOURRSpeed 3 года назад

I got them from my local auto parts store! Most places carry them!

@MrDizzank 2 года назад

Where does the little black wire go?

@BrosFOURRSpeed 2 года назад

Can you time stamp where you are talking about!?

@chemuxx1235 4 года назад

Where did you buy the fuse adapters?

@myjlwranglerproject4125 4 года назад

Why not just mount the Switch by the compressor on the bracket. You have to open the hood and plug in hose there anyway.

@BrosFOURRSpeed 3 года назад

While that's a good spot for it too, you also have to go inside to turn the truck on as well to use it too. Both spots could work.

@waynasfamilyadventures147 3 года назад

That's the smallest one ARB do for inflating tyres. The smaller one you refer to is for air lockers only

@BrosFOURRSpeed 3 года назад

Well this one works fine for inflating tires on my truck

@BrosFOURRSpeed 3 года назад

Not exactly sure what you mean. This compressor I installed in this video is what I use to inflate the tires, it works well!

@yotaGuy-hp3qs 5 лет назад

Great video that looks awesome can’t wait to see u do more off roading

@BrosFOURRSpeed 5 лет назад

Thanks!

@17874 3 года назад

What size nuts did you use to mount it to the three pre existing bolts on the passenger side fender? Where did you get them?

@BrosFOURRSpeed 3 года назад

Well I had a drawer full of them and picked out ones that fit properly. I don't remember the size, so sorry for that! I'm sure you could test fit some at a local auto parts store possibly.

@alfredopacheco7581 3 года назад

Great info!! Could you send a link for the fuse adapters?

@BrosFOURRSpeed 3 года назад

I got those from my local auto parts store! Advance auto or auto zone should have those!

@alfredopacheco7581 3 года назад

@@BrosFOURRSpeed Thx.

@joshuamiller9648 4 года назад

Ok so the solution for me was adding two fuses to the fuse adapter. I couldn’t get my switch to turn on either and was not finding a solution in the comments. It hit me that there were two fuse ports on the fuse adapter so I tried putting two fuses in and then I got power to the switch and compressor.

@edgardorodriguez1314 3 года назад

Yeah I can’t get mine to turn on. The light illuminates on the switch but the compressor is off. I wonder if I need another fuse as well.

@codyholder8461 5 лет назад

Dude looks like David Spades

@jasonmolihan61 Год назад

Any regret not buying the twin, after 3 years?

@BrosFOURRSpeed Год назад

No! It’s worked great for what I’ve done! I did 8 tires back to back once and it was fine! I don’t use a ton so maybe if it was every weekend, but I don’t see upgrading at all.

@jasonmolihan61 Год назад

@@BrosFOURRSpeed I want to be able to air up, and also use it for a air horn. Deep down I know the single would be fine with a gallon tank, but I’ll probably end up buying the twin.

@BrosFOURRSpeed Год назад

@@jasonmolihan61 If that makes you feel more comfortable!

@raphaelclarkchristianraran7764 3 года назад

Hello dude! I may be a bit late here but do u mind telling me the purpose of that white plastic thing u are pointing at 2:48? I also found those on my arb air comp but i do not know the use of it... would u mind.. Thanks!

@BrosFOURRSpeed 3 года назад

Mine are still blank! I think you can add something else to it, but I'm not exactly sure what you would add there. It could be wiring for air lockers or something like that purpose!

@30-06 5 лет назад

Thanks for this great video! The reason I’m subscribing your channel!

@BrosFOURRSpeed 5 лет назад

Thanks for the support!

@lordwrath9621 4 года назад

Tacomabeast has some outrageous pricing.

@bradgt5130 5 лет назад

Love yalls video quality, still trying to learn more about editing and better cameras. Like that you was able to make your own mount, I opted for the slee off-road bracket, love it, it actually goes in the same spot you used. Not sure if anyone mentioned, a switch underhood. Good idea

@BrosFOURRSpeed 5 лет назад

I never thought to put the switch in the engine bay, may have to at some point.

@horaciohdez7491 5 лет назад

to the fuse adapter you put fuses, or only those that were placed in the fuse box?

@mdoneg 4 года назад

I don't understand the fuse adapter part. Where did you get those?

@BrosFOURRSpeed 3 года назад

From my local auto parts store, they are very common, just make sure they fit the length of the fuse being used.

@JBB175 5 лет назад

Can the brightness of the switch be controlled like all the other instrument and switch lights?

@troytokarczyk 3 года назад

How do you like that compressor? I'm thinking about getting it for my outback. I'm running 245/65R 17 Falken Wildpeak A/T Trail tire

@BrosFOURRSpeed 3 года назад

I love it! I use it for not only going off the pavement to air back up, but to check tires during cold weather and I've had to use it for other peoples cars too, it's been great having it mobile!

@jlrecoder1 4 года назад

Where did you order the fuse adapters from? I have some but not sure if they are the same?

@BrosFOURRSpeed 3 года назад

You can get those from the local auto parts store! Just make sure they fit the fuse you are using. Some fuses are longer than others.

@edgarandreasyan521 3 года назад

Anyone know where I can buy a bracket ?

@BrosFOURRSpeed 3 года назад

I made one! It was pretty cheap and not that hard to do! ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-GzWz8IW41Ow.html

@kevinnaira3816 5 лет назад

What amp fuses you put into each adapter and what side is load/source when you plug it into the fuse panel?

@andrewcooley8627 3 года назад

What connector did you order to hook hose too

@BrosFOURRSpeed 3 года назад

Everything came in the kit! Can you time stamp what piece you are talking about just to be sure?

@chasebasile8767 3 года назад

Can I bypass tapping into the fuse box?

@BrosFOURRSpeed 3 года назад

I haven't watched this in awhile lol, but I don't think I tapped into the fuse box at all, just into the battery.

@edgardorodriguez1314 3 года назад

How’s it holding up?

@BrosFOURRSpeed 3 года назад

Never had an issue and I've used it several times off road! Love it!

@musafir1930 5 лет назад

Hi, thanks for the great informative video. wondering what particular fuse adopter you used as i got one from Auto zone and realized the fuse from truck don't match with the adapter.

@edgardorodriguez1314 3 года назад

I just came across the same issue. Where did you end up finding one? If you did.

@BrianSmith-ws7gl 5 лет назад

Did you just add the fuse tap in there with just the fuse from the fuse box or did you have another fuse added into the other slot on the tap? I can’t get my compressor to come on with the switch on my second gen? Thanks

@dxl1key 5 лет назад

Fuse has to be the longer one.. but with that one, my compressor won’t turn on either.. did you figure it out?

@atch9790 5 лет назад

Nice work

@BrosFOURRSpeed 5 лет назад

THanks!

@bcask61 5 лет назад

Glad to see David Spade is working again.

@Bradley2001 5 лет назад

I’m gonna do the same thing to my 2nd gen taco, but I’m gonna put it in the storage compartment in the bed. The one opposite the bed outlet. Will it fit in there?

@BrosFOURRSpeed 5 лет назад

It would, it took up the whole compartment though and I didn't really want to drill into the plastic or anything, but it could work there.

@Bradley2001 5 лет назад

Bros FOURR Speed thanks

@mojamz593 5 лет назад

Are you using all the wires in the isolation switch loom?

@BrosFOURRSpeed 5 лет назад

Yeah, it's just the three together on that switch.

@terry5008 3 года назад

Since you have to pop the hood to use the air compressor and you're only using it for tire inflation, why do you need a switch on the dash? Why not just have a mounted weatherproof switch on the firewall next to the compressor? Seems like a lot of much trouble to go through for no gain.

@BrosFOURRSpeed 3 года назад

Thats a very good point in all honesty! No clue lol

@stacydornan9765 5 лет назад

Good job young fella

@BrosFOURRSpeed 5 лет назад

Thanks!

@Artofspeedd 5 лет назад

💣

@tysoncarl8413 4 года назад

What fuses did you use?

@BrosFOURRSpeed 4 года назад

I don't think I used any, just connected it to the battery.

@yoboo6167 4 года назад

Thanks for sharing, should make the install go a little smoother tomorrow. Don't worry though, if something goes wrong, I'll be sure to blame you in the comments! (Sarcasm/joke) lol!

@BrosFOURRSpeed 4 года назад

Hahah, hopefully it goes well! It wasn't too bad to do.