Installing Blum Movento Undermount Drawer Slides and Adding a Push-to-Open Feature 

Glad it helped

You got this!

Glad it was helpful!

You're very welcome!

Glad it was helpful!

Glad you enjoyed it!

We will keep that in mind as a possible video for Larry to tackle in the future; in the mean time, you could give our customer service line a call at our toll free number 800-383-0130 and our staff there would love to help problem solve as well!

Glad it was helpful!

Should the back pin have play against the back of the drawer?

😁

Most large scale cabinet makers have automated milling, so the kind of stuff you see with this hardware goes into a configuration sheet once and is used without issue 1000s of times.

They really arent that difficult to install - but if you dont work with CAD i can see why the positioning options might seem intimidating at first.

I'd think you could do that, but you'll have to remember to compensate/offset the cabinet rail placement by an equal amount. Only other concern is if the drawer is supporting heavy things, you're putting a lot of strain where the runner wasn't designed for it.

Lucky for you we've got a whole gosh darn video covering just that topic! ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-bW9AHGcHx1Y.html That video should help. If you'd rather speak to a real person, give us a call at (800) 383-0130, we'll be happy to walk you through it all step by step.

At the end of the day, a drawer slide is a drawer slide. The way the market is right now, the drawer slide that you can actually get your hands on is the right drawer slide to use.

Blum is currently light on supply, so we're having a hard time getting them. I suspect many other distributors are having the same issues. As soon as supply is available, you can be sure we'll have them for sale.

Yes Andrea, use your useable cabinet width when configuring drawer box width

Hi, The Movento Tip-on requires a 3.5mm gap or 1/8". A sliding square will work fine.

Hmm.. This is a problem I have never experienced. I will look into it and see if I can duplicate it.

Well Larry is also looking into this, you could give our customer service line a call at our toll free number 800-383-0130 and our staff there would love to help problem solve as well!

I am going to stick my neck out a little. The drawer front (face) is separate from the sub-front. Once installed the drawer front is located by calculating overlay and fastening to the sub-front. How am I doing?

@@larrykoob507 thanks for your reply, but I’m trying to draft the cabinets in cad before building them (so I can get a parts list). It turns out, though, I just got the runners today. If you wanted to mount from the top set of holes on the cabinet rail, they are about 9mm (on center) above the top of the drawer rail. With my 32mm cabinet setup (which has the face top and bottom edges placed 1/2 way between system holes) , this meant that I needed to place the drawer bottom about 25mm from the bottom of the drawer face. Of course the movento slides do allow adjustment so you have a little play there. The specific measurement for drawers and faces will vary with how you have your system holes laid out and how much recess you’ve given the drawer bottom, but the important measurement is the 9mm from the mounting point to the drawer rail top. With that measurement you should be able to determine placement.

Good! I did misunderstand your question but it looks like you’ve got it figured out. I wouldn’t know anything about putting this information into CAD.

The depth can be between 12 and 15mm. (I assume you mean from the bottom panel of the drawer to the bottom of the box frame).

What I mean is, shouldn't the nominal lenght of the runners be the measurement from the back of the subfront (the surface where the front locking devices are attacked to) to the back of the drawer to account for different front and back thickness?

That's a great question, please give us a call at 800-383-0130 any time between 8am - 5pm CST time Monday through Friday; our customer services staff will gladly help problem solve the issue and a solution! -Woodworker's Hardware wwhardware.com

I believe they make different tensions or "strengths" for the tip-on mechanism. It sounds like you need a lesser-strength version. I think he explains it in the video.

Hello, the 769 Movento is designed to work with drawer material thickness between 1/2" to 5/8" If you have more detailed questions, or would like more clarification, please give our customer service a call at 800-383-0130 or email us at info@wwhardware.com -Woodworker's Hardware

How do I determine the length the drawer sides need to be to prevent this from happening again?

Hello, The length of the drawer box when using a 22-inch (550mm) drawer slide would need to be 22 inches from the front of the sub-front to the back of the box. If you have any other questions about the Blum Movento please don't hesitate to give us a call at 800-383-0130, our wonderful customer service staff would be happy to help! Hours are 8am to 5pm CST, Monday through Friday. Thank you -Woodworker's Hardware www.wwhardware.com/

As this video pertains to a couple of options for the slide and push-to-open feature, could you please clarify which product is causing you the issue and what you mean by it is stopping you? If it is easier for you, you can also give us a call at 800-383-0130 and speak to our customer service for assistance. -Woodworker's Hardware

Tip on is optional.

@@byever1 thank you!

Hmm, I am wondering if you have the wrong locking devices. You might have the Tandem devices and not the Movento.

Did you figure it out?

Every full time cabinet maker I've spoken to does it the way we describe in the video. Even if it were wrong, it still works.

@@WoodworkersHardware Hi, I think I have found the answer to this difference of opinion. The runners made and sold in the US are different to those available in the UK. The instructions for measuring and fitting are also different. I should have realised something was wrong on seeing the size B763H4570S because this runner is not available in the UK. Our nearest equivalent is 760H4500S.

Oh, interesting. I was not aware of that. Thanks for sharing

@@WoodworkersHardware Clearly the US system is much better and easier to understand. It make sense because the locking device locates/attaches to the back of the front drawer panel and the back of the slide attaches to the back of the rear drawer panel. Providing the same thickness panels are used for both the whole thing must work perfectly. I cannot imagine why the same system cannot be adopted for Blum slides sold in Europe.

Hi Paul, I am the one that made the video. I am not familiar with the 760H4500s but for all of the products in our inventory the drawer box length is shown in millimeters in the part number. For example a 763H4570S the drawer box lenght is exactly 457mm or 18inches. It would be my assumtion that the drawer box length for the part number you are giving is 450mm

This is very good to know. They actually advertise the rails as Tip-On Blumotion, which would seem to imply they work harmoniously. I may just return the Blumotion components if they serve no purpose.

@@dclowd9901 I've actually managed to get some decent soft close feature back. Initially I bought the L2 strength tip-on device and it was too strong for my draws which I didn't know to start with. So, it really depends on the weight of the draws to he honest. I would say it needs to be perfectly engineered in order to enjoy a smooth opening and soft close together. Hence their ready made kitchen drawers are very nice. I made my drawers myself so it took me a lot of adjusting but in the end I am pleased with them. It's a great bit of kit. I suggest you to give it a try at least see if it works for you and if you like them. The packaging is very easy to open and re-seal in case you decide to return them eventually. Good luck.

@@attilagal6672 Sorry for the late response. I am happy you got some soft close feature back. This is something I have not noticed with the tip-on. And you are right about the strenght of the tip-on.