Perfect Fitting Drawers Every Time! Blum Movento Installation

Подписаться 59 тыс.

Просмотров 57 тыс.

50% 1

Here is a link to the manufacture of the Drawer Boxes - • Making Oak Dovetail Dr...
Double Sided Tape Used : amzn.to/3KBrN5o
Blum Hardware links:
Runners - amzn.to/3KAldvO
Front Clips amzn.to/3qP56mv
Depth Adjuster part no 298.7601PR
Template Part No T65.1000.02
Thankyou for watching, please let me know what you think of the Voice over format?
If you’d like to support the channel so we can make more videos please consider becoming one of our Patrons or sending a one off donation Via PayPal
PayPal Donation - paypal.me/OliverBradshaw
Patreon is a simple way for people to support the channel with a minimal monthly subscription.
If you'd like to support us go to our Patreon page here - / bradshawjoinery
Or you can buy me a beer here - BuyMeACoffee.c...
Help support the channel when shopping on Amazon, if you click this link below before buying anything on amazon, I will receive a small percentage of the sale price. It will not cost you any more, so please help me out if you can.
UK: amazon.co.uk/?...
US: amazon.com/?ta...
INSTAGRAM ► / bradshawjoinery
FACEBOOK ► / bradshawjoinery
WEBSITE ► BradshawJoiner...
qpwoeirutyghfjdkslazmxncnv83
#Joinery #Woodworking #Drawers

Опубликовано:

28 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 94

@haydenharris5506 2 года назад

Top tip, pop some weight in the drawer box during final height adjustment. Square frames can be quite brutal and unforgiving, so the internal bevel is a really nice touch! Beautiful work.

@BradshawJoinery 2 года назад

Pinned, Yes good shout, i normally bias slightly high but that's a good one i haven't mentioned! The bevel works really well.

@coggsy3036 2 года назад

About 40-60kgs?

@tonyworkswood 2 года назад

This is a Blum tutorial from an end user. Excellent explanation and demonstration. Tony

@BradshawJoinery 2 года назад

Cheers Tony, They are the best IMO.

@sicpac66t 2 года назад

I like the detail of how the drawer front sits just inside the face frame in line with the bevel and creates that shadow line. Proper high end finish.

@BradshawJoinery 2 года назад

yesh its a nice detail, Adds a lot of work in making the face frames, getting sharp clean sanded and painted bevels compared to square, but it looks detailed without being fussy.

@leesmall7693 2 года назад

Fantastic detail to work , cracking job as always , looking forward to seeing your next video 👍

@BradshawJoinery 2 года назад

Cheers Lee! :)

@johnpeplow3985 2 года назад

You are the Rolls Royce of wood working.

@BradshawJoinery 2 года назад

Haha! Thanks John, I've still plenty to learn and master! 😂👍

@johnpeplow3985 2 года назад

@@BradshawJoinery Find that hard to believe with the high standard of work I’ve seen on your videos.

@tonyworkswood 2 года назад

Enjoyed watching a professional at work. Once you've mastered these runners there's no excuse for badly fitted drawer boxes and drawer fronts. Tony

@paultay23 2 года назад

Great attention to detail Ollie

@BradshawJoinery 2 года назад

Cheers again Paul :)

@ramrodou812 2 года назад

awesome videos, guys. i really like watching a craftsman at his work. no annoying music to ruin your outstanding videos. keep up the great tutorials.

@BradshawJoinery 2 года назад

Cheers For that buddy

@PeanutsDadForever 2 года назад

Good break down of using Baum Fittings. Thanks. 🇦🇺👴🏻

@BradshawJoinery 2 года назад

Cheers Mark. Did you mean Blum or is Blum called Baum in Aus? Curious!

@scottrice5336 6 месяцев назад

Beautiful work man

@normancoutts 2 года назад

Good to see. Thanks.

@BradshawJoinery 2 года назад

Cheers Norman

@davidsullivan1529 3 месяца назад

Clear and concise

@MHTutorials3D 2 года назад

Superb

@BradshawJoinery 2 года назад

Thankyou Mike👍👍

@bobmartin5101 2 года назад

Wonderful.

@BradshawJoinery 2 года назад

Cheers Bob :)

@s70cas7ic0 2 года назад

Those cabinets are incredible! Do you mind sharing tips on their construction with the community? 😅

@BradshawJoinery 2 года назад

I have a video coming shortly detailing the build process of a curved cabinet! but i havent done anything on the normal ones yet.

@s70cas7ic0 2 года назад

@@BradshawJoinery I have to be honest against my interest, those cabinets are so beautiful you should put together a paid course on how to design, build and paint them. I would buy it in a heartbeat. 👍

@JmackL Год назад

Hi, I see it was mentioned below. Would love a tutorial on your cabinet. Did you build a carcass and add a face frame. I hope to do a similar unit like you did for the end grain butcher block. Love your work

@BradshawJoinery Год назад

Yes I did, then join with screws and dominoes

@hurcorh 2 года назад

The front height adjuster at 9:18 we pre set halfway prior to installing drawer fronts. This gives you up and down adjustment once the front is fitted. If they are in the lowest setting prior to fitting the drawer front you can only adjust the drawer front upwards.

@BradshawJoinery 2 года назад

Yeah thats an option! Generally on small pieces of 2mm tape, the fronts drop a little so require a couple of clicks to lift them back anyway, but good shout, would be prefect if using proper double sided tape as there is no movement in that.

@hurcorh 2 года назад

@@BradshawJoinery You make a good point most of the time drawer front adjustment is up rather than down. Have you used those blum drawer front connectors before? 295.1000 is the code I think

@BradshawJoinery 2 года назад

No I haven't but what s great idea. The only thing I don't like is you mark the holes to attach from the front to the drawer then drill through, potentially getting breakout?

@BradshawJoinery 2 года назад

No I haven't but what s great idea. The only thing I don't like is you mark the holes to attach from the front to the drawer then drill through, potentially getting breakout?

@hurcorh 2 года назад

@@BradshawJoinery Yep good point then you'd need to get a backer board or something to try and mitigate the blow out and it's just another step isn't it

@robhepple9206 2 года назад

Love your vids - great workmanship, keep them coming. Do you use any particular brand of glazing bar tape ? do you have a link please....

@BradshawJoinery 2 года назад

HI Rob, Look more for a Georgian bar tape, Try Marches Ironmingery, 1mm thick georgian bar tape. You can use wider and slice the roll down before peeling off (i was doing this in the video) I cant add a link as a comment but wil update the description with a similar product.

@merchantbankers Год назад

The slides don't seem to be attached at the back of the cabinet. Right? (It seems unnecessary when the sides of the runners are so securely attached.)

@BradshawJoinery Год назад

Correct, they are side fix in this case. bottom fix is available too

@korrupt4 2 месяца назад

Why do you use movento over tandems?

@BradshawJoinery 2 месяца назад

Premium range, more adjustment, bigger capacity,

@tonyharison2058 Год назад

Hi Mate I know this is an old video but just wondering if you’ve used the push to open versions of these runners? If so are they fairly straightforward? Been asked to do a job with one not even sure what bits I need ha ha!

@BradshawJoinery Год назад

Hi Tony i have. Push to open are ok but can be more problematic. Speak to LDL components and get a trade account setup. They are very helpful.

@nielshulgard3722 6 дней назад

Thanks for the super detailed video - it has been imensely helpful! How much space do you leave on each side of the drawer front, i.e. the thickness od your shim? Is it 1mm, 2mm?

@grahambrown5874 Год назад

Great video. Is there any way to use 18mm draw sides with these sliders. My stock is all this thickness.

@BradshawJoinery Год назад

Yeah, Just slim the side down that is below the bottom before glueing up to make it 15mm

@grahambrown5874 Год назад

@@BradshawJoinery Thanks.

@Harry-dm8or 2 года назад

On the underside of the drawer, where the clips are mounted, was is the depth left from the underside of the panel to the total underside of the drawer. Really hard to explain on text

@BradshawJoinery 2 года назад

HI Harry it can be upto 18mm i think, but be careful with wider sides, id stick to 15mm from under base to bottom of side

@Harry-dm8or 2 года назад

@@BradshawJoinery big big help mate, also while I’ve got you, what is deducted in width for drawer box

@BradshawJoinery 2 года назад

Work to 21mm to inside of drawer. So 15mm sides is 6mm deduction each side (12mm overall)

@Harry-dm8or 2 года назад

@@BradshawJoinery massive help mate thank you

@ptroinks 2 года назад

6:58 DOG!

@BradshawJoinery 2 года назад

Haha Yes, my dog has a second home at my customers during the day!

@colinmacdonald1939 2 года назад

Roughly how long does it take you to make a kitchen and fit it?

@BradshawJoinery 2 года назад

Haha dont askl!!! Ive been working on this one probably 6-7 months

@colinmacdonald1939 2 года назад

@@BradshawJoinery Oh no. I assume construction delays at their end. Pure workshop time I assume would be much less. Lovely kitchen, good work 👍

@BradshawJoinery 2 года назад

Erm a little bit there is a lot of detail in this particular project very much away from standard. Such as the oak pull outs by the Aga/but here block, designing, perfecting then building takes a long time and there are many components in this one that have undergone a similar process. I also do everything, design, organise make finish install alone so it's a slow process. The butcher's block even too a lot longer than you would expect. Curved cabinet... Easy 7 days work for one little cupboard. The two oak islands are english oak and slower to work with and filter the good parts for use etc... There is 43 handmade large drawers with 10x cutlery inserts, wall cabinets with special dowel detail that again needs designing, executing and is slower to paint etc. The bevel is also new and to customers spec, so again another challenge to produce professionally, not just router it on afterwards. It's also an expensive kitchen, I think the price is justified when I take you round the kitchen and point out the shear effort time and thought that has gone into it! There will be such a video soon!

@colinmacdonald1939 2 года назад

@@BradshawJoinery I obviously didn't realise you did all the design etc and quite the level of detail that the owner had specified. Lovely kitchen. 👍

@alecmartin8324 10 месяцев назад

Brilliant thanks for the video, but where did you get the drilling template? Was it direct from Blum?

@cliveclapham6451 2 года назад

No nipping round to Mrs Jones necessary 🤦🏻

@BradshawJoinery 2 года назад

Haha!!! Brilliant

@singe81 2 года назад

First!

@BradshawJoinery 2 года назад

Yes First indeed!!

@jasonadams6442 2 года назад

I agree with John. Beautiful as always. What is the finish on the cabinets

@BradshawJoinery 2 года назад

Cheers Jason, it's a waterborne enamel from Sherwin Williams, slightly thicker paint than the standard one, holds up better with the AA airless and seems to brush up fairly well too on the final coat

@jasonadams6442 2 года назад

@@BradshawJoinery nice I normally use conversion varnish with my AAA but I am tempted to try the waterborne enamel. Thanks. Great job and great video. Absolutely the best craftsman I have seen. And I live around lots of Amish.

@sperks73 2 года назад

Stunning work, love the bevelled faceframe and inset drawers/doors 👌

@BradshawJoinery 2 года назад

Thankyou, yeah its a lovely detaiil, a bit more work than square, but worth it!

@Dazza19746 2 года назад

It’s well smart! Must be a PIA but ! ( still worth it) They better appreciate it 😂 Did you whiz round with trimmer, then clean up corners with a chisel? Or do it like a beaded face frame?

@BradshawJoinery 2 года назад

Thanks mate, just to be awkward, neither 🤣🤣 I scribed the bevel on the tenoner 👍 seemed to give the best and most professional result from trying all three.

@Dazza19746 2 года назад

@@BradshawJoinery wow, I didn’t think that would work with that little lip, bit like a little skirting board scribe ( wouldn’t have on my crappy set up 😂 would have had a ‘raggady’ shoulder line for sure) We’ll done Ollie 🙏

@Dazza19746 2 года назад

@@BradshawJoinery actually I’m just about to order a tennoning disk from UK which will fit my old delta, and some scribing cutters 👍🏻. It’s shit in oz, or I’m just not ‘hooked up’ well enough 👍🏻 Guys at whitehill seem friendly and helpful.

@vanzipper6486 Год назад

👍🫡

@465maltbie 2 года назад

That is a very pleasing shade of green. Thanks for sharing. Charles

@BradshawJoinery 2 года назад

Thankyou Charles! Yeah lovely colour, Sage Green in Matt

@CreativeCarpentry 2 года назад

I’ve used those runners for a while but I’ve only now seen their full functionality! They are pricey but they do work well. Cool videos thanks for taking the time to make them

@BradshawJoinery 2 года назад

Cheers David, they are pretty darn good, but you do have to work with the materials, they wont eradicated out of square boxes or frames!

@joshweaver8806 Год назад

Thank you so much for the video, amazing work! Would love to see a trouble shooting video and how you work through some of the common problems when installing drawers.

@kemronirons5521 Год назад

Amazing work. What gap did you have to leave between the drawer sides and the cabinet walls for the runners?

@johnbolwell5969 2 года назад

Outstanding, professional work.

@BradshawJoinery 2 года назад

Thankyou John

@mauserkk98 2 года назад

Looking sharp .

@BradshawJoinery 2 года назад

Thanks Nicholas

@Soulboy63 3 месяца назад

Brilliant video

@thomasschurmann322 5 месяцев назад

Thank you!

@thomasbroker69 4 месяца назад

Lovely job

@akfisher7138 2 года назад

we don't notch the front of drawers-just the back. We then put those orange fittings flat on the base/bottom and screw into the front part of the drawer. (not drawer front) We compensate by altering drawer dimensions to suit the runners of course. I just think it is stronger that way, just in case the green, in your case, drawer front moves, the fittings are always nice and solid, or even if you have to remove for touch up after cooking spillages....And you save a bit of time too. Just an alternative choice for anyone reading this. Really like your tip about Georgian tape. Cheers.

@BradshawJoinery 2 года назад

Yeah thats an option! I always tend to be cramming for space so the extra 15mm is worth the effort, but yeah it deffo works both ways! Cheers mate! :)