Installing coil overs on my corolla

Подписаться 1,8 тыс.

Просмотров 10 тыс.

50% 1

POV of the Maxspeedingrods coilovers. It's too stiff for my preferences even though the dampening was turn all the way to soft. I had to put my lowering springs w/KYB Struts back on. If you're on the budget and don't mind stiff ride then it's a cheap upgrade. If you're going all out with good brands, then BC, Fortune Auto, and Tein Coilovers would be something to consider if available. Would I recommend these coilovers? The answer is no, I would not recommended.
Thanks for watching

Авто/Мото

Опубликовано:

5 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 47

@KiKingiiKiu 3 года назад

Haha! What a coincidence I just tried these this past week. I definalty don't recommend if you have to commute through bumpy roads (or even small hills), they feel waaay too stiff. Do get these if you only want them for cheap riding height adjustment for sure. I ended up getting some cheap economic Mostplus brand ones and they work just fine (no ride height adjustability btw) and feel waaay smoother. Thank you for the videos!

@charliexiong6541 3 года назад

For real, only if there are more aftermarket support for these corollas.

@antonioquesada-castro4925 Месяц назад

great video, doesnt look like a complicated work, I asume that the car must be aligned afterwards...

@charliexiong6541 Месяц назад

@@antonioquesada-castro4925 in my case, it didn’t require alignment but most case it does.

@yungblade7 2 года назад

Hey man how does it handle? Can you post a pov video around the mountains by any chance thanks 💥

@jesusdelgado9403 2 года назад

Sickass ride Charlie ! One thing that a like a lot was that roof rack and was wondering if you can send me the link to where you got it. I’ve been looking around but what do you recommend? Thanks in advance

@charliexiong6541 2 года назад

Hi, it's a universal Yakima bike rack. The bar are 48 inches and I believe the wind fairing is 40-45 inches or use a measuring tape to get the correct length. Good luck.

@jesusdelgado9403 2 года назад

@@charliexiong6541 thanks Charlie I appreciate that and I read earlier something about the q clips. I looked into that but there’s so many. Do you know which ones are the correct ones?

@charliexiong6541 2 года назад

@@jesusdelgado9403 I forgot the size of the q clip but Yakima website should be able to pin point the size you need

@gabrielotero4455 2 года назад

Minty minty 🔥🔥

@vangrijaa 24 дня назад

show us how you did it, get a tripod or something

@leonardomanzano4302 9 месяцев назад

What’s the color on this Corolla? Sick

@chrisking7590 2 года назад

Wassup dude I just bought a 97 Corolla I was wondering where did you end up finding your front bumper and what kind of side skirts are you using ?

@charliexiong6541 2 года назад

Hi, sideskirt is off an 8th corolla S. The euro style bumper, i happened to came across on EBay couple years ago. If you join the AE 100&101 corolla group on FB. There are people in there from out of United states that sells them. The seller usually post their items on those group when they have it available. Good luck.

@antmatic4461 2 года назад

hey my friend, I got a corolla myself and it’s a 94’ but I was wondering, do I need to get anything else to support the coilovers? I ask bc I don’t know if anything else will fail or something if I just install coilovers. Thank you!

@charliexiong6541 2 года назад

You don’t have to do anything else. A set of coilovers should comes with everything you need to lower your car.

@antmatic4461 2 года назад

@@charliexiong6541 awesome! That sounds good to me. I appreciate your feed back! I’ve been having trouble trying to find peeps who really know about these corollas, so I really thank you for your help!

@charliexiong6541 2 года назад

@@antmatic4461 youre welcome.

@antmatic4461 2 года назад

@@charliexiong6541 Sorry I got another question, so the max speed coilovers are not worth it, so are lowering springs better ?

@charliexiong6541 2 года назад

@@antmatic4461 if you like stiff bumpy ride then it’s okay because it’s a cheap upgrade but I would prefer lowering springs over maxspeeding rods.

@therandompotato3360 2 года назад

Hey man I actually have a quick question if you might know the answer. I also bought a set of maxspeedingrod coils for my corolla but I notice the top mount keeps moving. To the point where the rear wheels are now cambered a bit. Is there anyway I can lock them in place just so I can have the whole assembly in the rear straight. I know the top mounts are supposed to move and tilt but I don’t see anything to lock them in place

@charliexiong6541 2 года назад

There should be 4 screws with Allen key heads. Those screws needs to be tightened down to prevent sliding.

@therandompotato3360 2 года назад

@@charliexiong6541 but the rears don’t have them and the whole top mount can tilt slightly. Maybe there’s something else to tighten it?

@charliexiong6541 2 года назад

@@therandompotato3360 correct, the rear don’t have it and if it’s loose, make sure the nut holding down is tighten.

@albertomadrid940 Год назад

Libk to coilovers??

@charliexiong6541 Год назад

Maxspeeding rods website

@jr10158 2 года назад

What bumper lip did you get I'm looking for one for my car I can't find one

@charliexiong6541 2 года назад

It's for a 94-96 Acura Integra. This particular one I have is probably discontinued.

@shairafzalkhan3106 Месяц назад

does it feel comfortable

@charliexiong6541 Месяц назад

No, the Maxspeedingrods are super bouncy even though it's turn max to soft. The front however is comfortable but the rear was changed to lowering springs. The suspension were kept with maxspeedingrods coilovers in the front and HnR lowering springs in the back with kyb struts. The ride was comfortable.

@iiLuRo 2 года назад

Mind saying where you got your front bumper from?

@charliexiong6541 2 года назад

Hi, the bumper is a Euro Touring front bumper. I purchased it from Dominican Republic on Ebay years ago. You can join the AE100 and AE101 Corolla group on FB, there are people who are willing to sell jdm parts. You might find what you need.

@Hensleytheofficial Год назад

hey can u send me the link so i can get the same ones

@charliexiong6541 Год назад

Hi, let me go find it and I’ll share the link.

@ZuTangClan 3 года назад

Hey charlie random.question but where do you jack up your celica by i tried lifting it once using the motor mount right infront of cross member and the mfer slipped off.

@charliexiong6541 3 года назад

Hi, if you jack on the flattest surface on the cross member, it won't slip off. But you'll never know so always use jack stands for safety. Thanks for the heads up.

@ZuTangClan 3 года назад

@@charliexiong6541 u got a insta?

@charliexiong6541 3 года назад

@@ZuTangClan I do but I'm not very active on Instagram. It's xiong_azn