Installing Flamethrowers on Your Ride 

what a excessive positive guy

With this I can live my life a quarter mile at a time, and for those 19 seconds or less, I'll be free.

Anyone else's childhood consist of this show and the rest of the powerblock?

I want some of whatever Stacey is on. He is always so happy and enthusiastic about everything.

I always loved that show I wish they bring it back or show reruns

Hi 602manuel, Well, as stated on the video, this kit is not to be used on vehicles with catalytic converters. The raw fuel will result in a clogged converter. Also, because the power to the ignition coil is interrupted; misfire trouble codes will be set in the vehicles on board computer.

2020 baby, it's too tempting to throw this on the mustang for shits n' giggles

Thank you it's about time somebody showed you how to do it correctly I've watched like 10 videos before I found you I will be purchasing this kid awesome!

I just ordered a ND proton plus kit from Summit Racing, good stuff

Hi DA GUY, We have two kits available ranging in price from $94.99-$189.05. You can click on the link in the description box to check out the kits! Please let us know if you have any additional questions. Thanks for watching!

The best mechanic hands down

Just installed these on my Dodge Challenger, I'm quite pleased with the results.

@SukotsutoMaki Thank you!

2020 😂😂 i wasn't even born when this camera was made

You can also use a washer fluid reservoir and pump, and run the lines and nozzles in the pipe right in front of the plugs.

Remember watching trucks w my dad as a kid. Good times

Great value tim the tool man .

I actually missed this episode!!! I swear it was the only one I missed. Then I doubt it was replayed ever

Good information

I really love it

I miss watching trucks with my dad on Saturday mornings. Me and my dad actually met Stacey David at his kids highschool when we were being extras for a RU-vid video.

wow this video really helps is there a specific kit for a fox body mustang?

He could do propane injection after the cat and post cat O2 sensor so as to not throw off the sensor readings. Use a solenoid valve to turn on the "regulated" propane flow into the exhaust and a spark plug near the end of the pipe. He may need to fab up an exhaust tip that'll allow air to be mixed in and efficiently ignite the propane in the exhaust as it exits the tail pipe. Also he needs to consider careful placement of the pipes direction so he does not cause a fire.

Ahh this guy. Love this show

jegs has a chemical compound that can change your exhaust colors and smells and also you can run different octane fuels to change the color

i have heard the lsx crate motor is good for 2200 hp on stock internals, and the ls1 is good for 1100 hp on stock stuff. diesels like the cummins push 800 hp and 50+psi on stock internals. any american v8 or diesel can be woken up with some very minor mods and push 500hp very cheaply

This is great!

I love this video, it was very entertaining and it made me laugh. You Summit Racing guys are awesome, I do business with you guys all the time. Hey, if anybody needs anything including technical advice from Professor Overdrive, these guys really know their stuff. YOU GUYS ROCK! Thank you so much for being out here. .^_^.

So from reading the comments I'm assuming delete the cats=flame thrower but they are a company so they aren't allowed to recommend that for legal purposes. Lol.

I miss those Saturday mornings watching this show

Old video? What year? Is this from tv cause it's looks like it's from tv

He reminds me of Scotty

Thats amazing..

he forgot to mention that you have to have the exhaust HOT! If you just start it up and try it, things can go wrong! mine wouldnt fire the first time, second time... (the first time i tried it cold) and then the THIRD time I tried it... BOOOM and the flame went UP the pipe not back! blew both my stamped turbo mufflers out and fucked the whole exhaust system. Better hope your exhaust is fully welded, including the mufflers!

Yep gonna put these on my 03 Silverado no cats true dual cherry bombs gonna have rumble and flames lol

I use to always watch this show on TNN

Hi summit can u do this on a 350z

Trouble with doing it on a 09 GMC sierra is that the whole ignition and fuel system is computer controlled. So running a straight pipe system in itself will trigger a MIL (Malfunction indicator light) due to the catalytic converter missing. Also overridding the coil packs to shut off will also trigger a MIL, the raw fuel mixture going down the exhaust will also trigger a MIL, In effect when the MIL goes on, the system may go into a limp mode and cause the vehicles performance to act poorly.

Was this video filmed with a potato?

Does the engine cut off completely wen u hit the switch?

Summit racing do these also work on things stack pipe on big rigs?

@forwardspace9145 just the cats....the purpose of them is to burn left over fuel from the combustion cycle. Mufflers are fine.

summit racing. instead of a push button, why not hard wire it into a clutch sensor?? have an on/off toggle switch, and then you could have the clutch in at a stop, rev it and throw flames. then flames for each shift while rpms drop. then its more of a natural look, not just a ricer look :) keep in touch! let me know your thoughts on this. also, i have a 06 subaru sti with an aftermarket 20g turbo. full 3" catless exhaust. i ran all my wires and instead of going through the ingnition, i went from the battery with a toggle switch on the dash. i put an extra coil in the trunk to run the spark plug wire down to the exhaust. my coil is gettting heated to much to touch. and no spark from the plug. any suggestions?

posible on 4 stroke scooters?? would be awsome!!!

This is legend

Did he just drill holes in that car?

Do u need silents on the muffler or straight pipes

can an exhaust shop remove my cats and weld in some flanges? so i can put the cats in when i need to and put test pipes in when i dont want to?

I have very limited knowledge about flame throwers, so my question is, How do you get from like the jet engine look flame to, how do I put this, like the other types of flames? Also how can person install this to get a shorter flame or a longer flame?

Sweet

So my question is that I have madza rx-8 spark plugs and wires and they are NGK Laser brand and I noticed that the coils tanks are bmw brand would it still fit???

would it not be possible to rig up a switch to a one way flow valve straight to the gas tank into the pipes for people who have CC on their cars?

Did it on my 83 dentside Ford 351c live action

"the flame thrower hahahh yeahh" lol

The mullet. Just wow.

@zjbeast with a few tools and a little bit of know-how.

So I have a 1996 Chevy Silverado with a 5.7 vortex but no one is talking about this engine and why

Pleaseeee i got a duster and im willing to buy an audi s7 engine will it work if i switched engines??? Which powerful enginr shall i buy for it to work?

Summit I'd really like to know what the exhaust setup is on this chevy, it made an awesome flame.

can you race with the falmes on? or it just when your park that the falmes can be use?

I wanna do something like this to my harley

💯

สุดยอดครับ 👍👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏❤️❤️❤️❤️❤️❤️🥇

My dads already disappointed in me. What could these hurt!

How can I purchase this exact kit

Would this work on a 2000 suzuki esteem ?

does it work on the charger rt 2007 ?? what about Malfunction indicator light ??

I wonder what size diameter thread on the spark plug or helicoil? never used em but havent got a welder so this is the route

cant you just use one coil to power both plugs like a super coil

Whose watching this in oct 2018😂😂?

is it ok to install the coil in that area? is it a problem to expose to water and dust? thank you in advance

I use these for tailgaters

Is there a way for it to on a 73 beetle

how much time can it remove flame

One other thing, best used with striaght glass packs not a chamber muffler. Cause it can blow a chamber muffler out......

i like this guy

if i got a car and wanted one of these fitting wud you fit it for me

i was looking for muffler plugs for my bike and got here

Wat kit was that and dries matter if u have a muffler

Is there any new way of doing this? Something which bypasses the catalytic converters? So you mount it behind it and it basically sprays some gas into the pipe itself without going thru the whole system.

how much does the kit cost?

i just watched cars and cameras hearse and now i am going to buy a hearse and do it

stacy david this dude will laugh at anything!

can i do it on a car that runs on LPG?

does it work on the GMC sierra 09 ?

AMA DO IT

Real men!

I miss power block Stacey was awesome

omg its James Belushi aka jim Belushi

where in sd can i get this done? and about how much? i just dnt wanna do it my self and fck up my car haha

This guy looks exactly like my old co worker and I always had a feeling like I’ve seen the guy before lmao 😂

Do you have to cut out your catalytic converters?

Great video; you really made it simple to understand ... If you guys want a Lexus SC300 to work on sometime, hit me up :)

hi ! nice vid brother! can i do on a ghibli s 2016?

or is it not possible because I have a car show in a few days and I want my car to be shooting major flames

Fire extinguisher and get ready to contact the fire brigade.

How do you place them on a motorcycle?

Didn't take that into effect, could always pipe an injector from a Propane tank in the boot, But that would definitely ruin any chance of Re-sale

2019 ?? 😂🤣

Sorry about that rude reply. Now to answer your question the right way. With a stock exhaust? No it will not. You have cats. But if you remove them and run a straight pipe from the headers back it will work. But you will most likely be illegal in doing so where you live. Especially if you have to get emissions testing. Once again my apologies. Stay strong and truck on my friend.