Installing Home Depot Gutters

Подписаться 316 тыс.

Просмотров 826 тыс.

50% 1

Finally getting all this water away from the house!
Correct crimper for the end caps and seams - amzn.to/2xOr8XM
Gutters - homedepot.sjv.io/3v7OX
Left end cap - homedepot.sjv.io/dMRZq
Right end cap - homedepot.sjv.io/NMNPv
Hidden Hanger - homedepot.sjv.io/YMdom
Seam joiners with sealant - homedepot.sjv.io/7vbxr
End with drop for downspout - homedepot.sjv.io/mPnbq
Get SSL Family Merchandise here - teespring.com/stores/ssl-fami...
.$.99 organic seeds - migardener.com/?affiliates=11... - use this link for $.10 off!
Please check us out at www.sslfamilyfarm.com
Find recommended products on Amazon - www.amazon.com/shop/sslfamilydad
and follow us on....
/ sslfamilyfarm
/ sslfamilyfarm
/ sslfamilyfarm
/ sslfamilyfarm
Daily Beetle by Kevin MacLeod is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/...)
Source: incompetech.com/music/royalty-...
Artist: incompetech.com/
Country Cue 1 by Audionautix is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/...)
Artist: audionautix.com/

Хобби

Опубликовано:

17 окт 2017

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 498

@SSLFamilyDad 6 лет назад

Here is the correct crimping tool for the end caps and seams - amzn.to/2xOr8XM

@fredwoods9030 6 лет назад

SSLFamilyDad Hi, Great job installing house gutters, they look neat, we liked the hidden fasteners, thanks for sharing.Blessings! !!!!!!

@hulkhatepunybanner 4 года назад

Would it be better in the long run to continue the downspout to the ground instead of on the lower roof? Won't the water shooting out of there raise the shingles or wear them out faster?

@ryandavis2752 3 года назад

@Vulture-88 Год назад

I'm a 58yr old female. I live alone in the North Minnesota woods on acreage. I have a huge 2 story, 4bdrm farmhouse and I need new gutters. 5k for the beautiful black seamless ones I WANT. But in the meantime I just need to replace a few failing sections. Thank you so much for such a clear, concisely put together vid. I actually believe I'll be able to manage. 🙋🏼‍♀️💞

@dalewalker2022 4 месяца назад

Perfect advice that I needed to do it myself. It's actually a simple thing to do.

@janellebellard1913 3 года назад

I like your duck and spider! To get the slope, you can put a tack every 10' down the facia, 1/4" lower each one, and snap a chalk line between them and follow that.

@Triumph421 11 месяцев назад

Or you could snap a line the correct way

@dva1946-WpAppsForThat 2 года назад

I liked how this guy put the gutter up in sections rather than a long unit (mine will be 24’). This will allow me to do it along w/little assistance. Very good video!

@jeffmotz1802 3 года назад

I had a quote from The Gutter Magician here in Florence Ky for $2200. Since then i had a financial turnback so i will be installing my gutters yo mismo. Thanks for taking the time to post this i am no longer intimidated whatsoever.

@VROOOOOOOOOOOOOOOM 2 года назад

That price is insane to put up some thin metal that catches rain. Geez. All these guys are ripping people off like crazy, especially now. Just do it all yourself. I just installed an entire new metal roof myself. Looks beautiful. Sick of these insane prices from contractors. Screw em.

@gregmann7936 Год назад

Thanks for showing us your method. I just moved into place that needs gutters...I've now got a plan.😄

@chintasrvvegankitchen7761 Месяц назад

Nice DIY video. You're so fortunate not to have a angled facia. I've had to use T-Wedges, which are doing great! Yes, saving money. Poor Honey Bee. Thank you!

@RaShSu100 4 года назад

It is a great video to watch and learned a lot about installing gutter by myself and i am going to try by myself. Thanks for your hard work showing and helping others to do it by themselves. Awesome and thank you so much.

@seaghostkilla 3 года назад

Just doing a small gutter project and this really helped me complete a DIY project. Great tips and out come.

@TotalDIY2737 Год назад

Loved the detail and appreciate all the narrating and explaining what went well/not so well & thanks for the verse at the end! Hopefully I can apply all these on my gutters when I do mine!

@RCFlyer007 Год назад

He did a great job with his video and explaining how it’s done. Thanks.

@NewsBroadcasting 4 года назад

The most important issue you guys need to know. Do not use Water based seals. Use a VOC/ polyurethane sealer. I replaced the gutters when I was 14 years old in 1995 and they still do not leak. Contractors who have installed them as a little as a few weeks ago have developed leaks.

@berthakincaid6159 3 года назад

Thank you so much for instructing on how to install gutters. I never ever done something like this but is so true that instead of paying so much money is we can do that we will definitely save a lot of money. I thank you for even letting us know of how much you kind of spend and how much you could of cost you to have someone to install it for your Home. This Increible job really give me an " idea" on how to install gutters and how much money I can save. Thank you so much.....God bless you and your family.

@groundskeeper5292 4 года назад

Thanks for a great video. I think I'm going to do this now for my garage. Was a bit concerned with some steps but you showed me the way!

@DMS20231 7 месяцев назад

That ladder with its bottom end so far from the house gave me the willies! No way I’d climb that unless I had a thousand pounds of dead immovable weight behind the bottom end.

@jodyk4949 4 года назад

Hey thanks for this video. I'm going to put gutters up and have no idea what or how until now! Very clear great job!

@nancylee331 4 года назад

I don' know if anyone ha mentioned this but the gutter guys that I know use a marble inside the gutter and if it rolls you have a slant for water flow.

@Ericb00 3 года назад

Thank you sir! I'm adding the 2nd half to my garage as previous owner just did front and side only (don't know why) sick of my garbage cans getting full of water each time it rained!

@nickstoliker8707 3 года назад

Instead of the junction pieces using tin snips to cut the outside edge top lip, then slide one gutter over the other. It works well. Of course using the silicone.

@fishmanfishman6511 3 года назад

The bee and spider action was cool! The video was very helpful. Thank you.

@darioferrufino4238 Год назад

Good job bro! I will save some money replacing my self my gutters this coming spring. Thanks for teaching!

@snipert6841 4 года назад

1/2 for every 10ft just snap a chalk line before you hang the gutter and it’s a lot easier to keep a consistent slope

@lukefeil2026 2 года назад

Been hanging gutters for 15 years and I can tell you plastic is a no go. And using a chalk line is very silly. As long as you’re getting minimal slope every few hangers you should be just fine

@snipert6841 2 года назад

I’m a carpenter… I use a chalk line for everything. I agree seamless gutters are the way to go.

@sammyelliott5554 2 года назад

Nice idea with the jig and saws-all. As a paint contractor for new houses I can’t tell you how many hack saw I have found after the gutter contractor leaves the job site. Nice video!

@clarkynco 20 дней назад

Excellent video!! Got prices for 39 feet of seamless gutter on a one story ranch, gutter only for $700-$850 and Leaf Guard (national chain) for a crazy $7000!! Guess I will be doing it myself. Thank you for the informative and detailed video. Great job!

@David-fv7zg 4 года назад

13:20 I came for the gutter install and this was a bonus in action!!!

@Its_just_Dave. 3 года назад

Great video. Will be doing gutters on my house soon. Used your video to find parts I need to get for my job. Going to be using rivets instead of screws. I like the hidden hangers you used, I’ll definitely be getting those.

@HydrophobicGoose 4 года назад

Great video. Awesome additions with the duck and spider. Kept me interested for sure!

@robertrobarge5294 3 года назад

Great job if you ever have problems with them in the future with water running behind them and staining your fascia it's because you need to tuck the back of the gutter behind the drip edge.i loved the verse.thanks again for sharing

@matthewhoopes4440 5 месяцев назад

That's what I was thinking but the way the gutter hangars attach I don't think it will work

@joycemastaw910 6 лет назад

Awesome video. Very informative and well done.

@victorparrish2274 5 лет назад

Thank you so much for the video. I found this very helpful. I appreciate that the video is "Home Depot specific". That's where I am most likely going to buy my supplies. I would have probably purchased vinyl but have changed my mind because of your video. I also appreciate that you mentioned the rivet option at the end. I own a rivet gun and wasn't even thinking about rivet simply mentioned it. DUH! It's arrogant of me to make a suggestion being as I haven't done this yet but I think you could accommodate the small section pasture downspout by simply adding a small section of gutter and pitching the end up in the opposite slope. That would give you something to catch that small section of rain and pitch it to your downspout. I would think that would be easier than trying to punch a hole and add your own downspout.

@SSLFamilyDad 5 лет назад

Great idea on that end piece, good luck with your project!

@amirhouseingholinia2023 3 года назад

I loved the background singing performed by the goats

@SteeleFreddy 3 года назад

Excellent video. I watched it and then installed my gutter. Very informative.

@SIE44TAR 3 года назад

The drip edge should overlap the back lip of gutter. To do this you have to clip the hangers onto the gutter in their proper locations prior to lifting the gutter and sliding it UNDER the drip edge. To get the proper slope you may have to notch the drip edge above the hangers on the high side.

@Varifyable Год назад

Instead of notching the drip edge just install the hanger over the drip edge then fasten through both the drip edge and gutter.

@wyndiefeatherstone948 8 месяцев назад

Thank you for saying this, it was a question I had!

@cooney850 6 месяцев назад

That’s what I was thinking. They do have to go under the drip edge. And piecing these together in place will not work. If you have to have them slid under the drip edge. Either way this is a very helpful video. There is more than one way to skin a cat. it just depends on how waterproof you want your cat skin to be.

@Jay_Dahl 2 года назад

Great video, thumbs up! I would be interested in how well the upstairs downspout works, by throwing the water out onto the lower roof. It would greatly enhance your video if you got out a garden hose, sprayed the top of the house, and showed us how well that strategy works.

@joanneroper116 6 лет назад

Great video with lots of helpful tips. Nicely done Todd!

@ricaldrich3424 3 года назад

Bc update it xx as xf cssdic up CNN V b m X XX czd xx cv to bixx xx sch x;, CO book city CB f

@nuthinbuttrubl89 4 года назад

You can seam gutters together without a connector. Takes a little snip and a couple sheet metal screws, but it works well and saves on the cost of the connectors and is one less seam, ultimately

@jonathangoin 4 года назад

Phil Timpson I am getting ready to install gutters on my house. Could you elaborate on your statement? It seems that the majority of the cost is in the fittings and corners. The 10 ft pieces are relatively cheap. Thanks in advance.

@vincentdow5899 3 года назад

@@jonathangoin I think he means: don't use a coupling connector. You can just lap the upstream gutter channel OVER the downstream one. I lap them by 4" - and then pop in a stainless steel self-tapping screw (small) through the widest, highest facing edge of the front. At the point i grab the backs of the gutter together with a vice-grip, flip it over and pass a screw through the back. Silicon, or polyurethane caulk under the lapped joint. This way looks much better than couplings... and couplings create a potential leak. 4" lap with silicon will never leak.

@paulierizzo7819 4 года назад

Great video! I will caution you about the corner by your air conditioner because there will be a waterfall off of that part of the roof and could damage your AC and electrical. You should have it go just past the edge of the roofing to catch all the runoff.

@vanessajeanne 3 года назад

Thank you, this is very helpful!

@luisbernal5510 3 года назад

As a gutter guy I have a few things to point out but this is a home owner doing his best.

@glopv2 3 года назад

Well, what?

@fyescas777 3 года назад

That was helpful.

@ernesthumes5774 3 года назад

Was it that his ladder was set up backwards at the beginning of the video or was it the way he had the ladder kicked way out? #very dangerous Don't try this at home folks.

@garygrace1399 3 года назад

I'm trying to install gutters over 35 ft if it's attached in the middle and I need to go both ways with it how do I do it without bending it I can't find a video showing that part

@dianegreiner4054 4 года назад

Great demonstration! Easy to follow! 😊

@rogeramadon4064 7 месяцев назад

Excellent video - Thanks for sharing! I have put up 4" vinyl before and am about to do the same 5" aluminum job myself, which appeared to be mostly common sense, but watching the steps you used were definitely helpful.

@MrDavidelliottjr 4 года назад

Good job.. Looks good. This is what i jse to catch my water all same stuff. But i use 3" pvc thin wall drain pipe for thr heavy rain. I use rain water for everything. Washing cliths dishes baths etc. I would suggest the black foam looking things home depot sells to keep out the bugs n trash. Trust me it helps. Can just take it out spray it and put it back. They come in 5 foot pieces

@danielleterry180 4 года назад

Thank you looking to install gutters for rain catchment on my Mobil home like your hidden attachment way better looks like it leaves space for leaf delectation screen

@gutterdownspoutimprovement7418 5 лет назад

You did a good job. Very helpful video.

@richardmarte293 3 года назад

Awesome video. Thanks for explaining the why all the things u didn't do. Great tips....

@marknewman3360 4 года назад

Extremely helpful. Nice job

@cliffljimenez4237 4 года назад

Thank you it helps a lot. Excellent job! ⭐️⭐️⭐️⭐️⭐️

@briankearsey1836 3 года назад

A lot of great info, thank you, but I just learned that the highest point on the gutter should fall just below the plane of the roof line to allow snow and ice to flow off without taking the gutter down with it. God Bless!

@TheFuelInjected 2 года назад

That's what ice stop is for, and only relevant for metal roofs.

@Turn.toJesus Год назад

yeah I think Tom Silva got that wrong. The high end should be as high as you can get it

@DownTheRabbit-Hole 2 месяца назад

Tommy was a bit out of his lane with some of his gutter videos. Use extra z flahing under drip flash if concerned about metal roof ice and snow and height of gutter.

@jjrock5 Год назад

4:55 the crimping tool you mentioned is for crimping clips or “teeth” on the upper edge of a sheet of vinyl siding for the final upper run on a wall.

@marvinorellana1302 4 года назад

Thank you for your video. I just bought a house and needs gutters. Your video will make it easier for me to do the job myself.

@darrenickes1140 3 года назад

Call a professional ,I can do a job a lot quicker an I can do it a lot cheaper than he bought them at the store.

@breid1966 5 лет назад

Nice job for a first timer. Like others mentioned, the ladder slope is dangerous. Rivets will last longer than the screws. 1/2" slope for every 10' of gutter. Start just a little lower than the dripline to keep the water from coming back under the roof. Use a chalk line to mark where the gutters will go. I agree with using the downspout insert vs. the adapter to make it look cleaner. I'm sure you saw and heard all the "pros" on here so I'll shut up - lol!

@biggstile 4 года назад

By dripline, do you mean shingles or drip cap?

@TheFuelInjected 2 года назад

If you're doing 1/2" Slope for every 10 ft you get a maximum of 40 ft at best of trough before you're hanging the trough below the fascia line. It also doesn't account for the actual roof surface area that eave is shedding. Rivets are also a terrible idea, unless you want the professional installer who has to replace your work to charge double for the removal and probable replacement of fascia as well.

@poofypoopy8838 10 месяцев назад

Wrong

@jimdaley6351 3 года назад

Very informative. Thank you for making the video.

@osfs90 4 года назад

Good video, simple instruction, nice job.

@kuyaraythedj 4 года назад

Awesome Vid! Thank you for the explanation and the Circle of Life spider snippet! lol

@wile69abc 29 дней назад

Thanks for the help!

@vsammons 7 месяцев назад

you can also clip in the hidden hangers every 2 ft on the ground. makes it easier to install when you get it where you want it when you are on the ladder.

@cymek11 6 лет назад

The top downspout that is above the lower roof should be diverted directly to the gutter below. In time water will wear out the shingles. Talking from experience here.

@SSLFamilyDad 6 лет назад

I guess I can just add a 90 to it and direct it down the roof but I have seen others done that way and the water flows right over the gutter when it rains hard

@cymek11 6 лет назад

90 down the roof, and another 90 into the gutter. The only problem you may experience is leaves, but better clean out the leaves once a year than replace the roof and/or ceiling.

@MattVey 6 лет назад

Yes!

@aguyandhiscomputer 6 лет назад

I like the 90 degree piece at the bottom so you can keep the water flowing where you want it or use a splash guard. Couldn't find a pic of a straight piece. prestigenoir.com/wp-content/uploads/2017/03/gutter-splash-guards-2.jpg

@tsm3479 6 лет назад

And inspectors will flag all those other peoples homes as well.

@dave434 Год назад

I'll be putting up about 25 ft on back of the carport next week myself, I had 3 Companies come give me an estimate , They wanted to rob me!! Leaf Filter bunch was by far the worse!! Thanks for your video here, It has helped me to know I can do it....

@JoseMaldonado-dy1cy 4 года назад

Outstanding way to explain.

@RR-wq3pq 4 года назад

14:05 that ladder angle!!!

@U-Toober 3 года назад

Right? WTF

@steveandsarahrutledge9105 4 года назад

I think you have a good sense of how to do the job without absolutely fussing over the little stuff. Kids, family, faith--those things last. Gutters, I mean, yeah, do it right, but no need worry. Get it done, and get back to the good life! Thanks for posting!

@LaToyaPlansLife 3 года назад

Great video!!! Thanks for sharing...this has been the most informative video. Love the spider shot😉

@fosterdl1 4 года назад

I'm sure someone has already commented that your "crimp" tool is a notcher for vinyl siding. Nice video and very helpful.

@nealorr5086 Год назад

Nails worked fine in my gutters, outlasted the gutters themselves (stainless steel).

@Bladefox3 4 года назад

Appreciate this! I am installing mine this morning!

@loganhatch 3 года назад

Howd it go?

@marcster13 6 месяцев назад

I wish i used the little connector to join gutters. I saw so many people saying to put one gutter into the other. It added so much extra time.

@myklmusic 3 года назад

Thanks. It's good I saw this before going to Lowe's today. I'd been concerned about the one-man job. I can do this.

@RB022366 Год назад

Very helpful. Thanks!

@melchoravillaneda180 4 года назад

Thank you so much for this tutoring video!. Thumbs up!.

@davepickering1 Год назад

That was an awesome video. Thanks.

@joycemastaw910 6 лет назад

Looks really good. Nice neat job!!

@gerardobautista7363 4 года назад

Good video, thank you.

@howardc2452 2 года назад

Super! Thanks.

@rob1andrews 4 года назад

When dumping on the roof, try to get down to the roof (instead of a foot above the roof) if you are too high the water will knock the grit off the shingles and drill through the shingles. Put the gutter clips in on the ground (ideally look for rafter location by looking for nailing on the trim board and match the rafter locations and spacing). Having the clips installed on the ground will make it even easier to install by yourself.

@nickarrigo5540 2 года назад

great advice rob!

@Shalmaneser1 3 года назад

I have an out-building where they left the rafter tails exposed. What should I put up to support gutters? I'm not having any luck finding gutter videos that don't use finished buildings.

@stevemoore4162 4 года назад

Thanks for the video. However i did my house and had the one gutter run onto the lower roof and i had a problem with the water prematurely wear out my shingles. I had to run a pipe directly into the gutter. Seems to work much better.

@derrickmartens3530 3 года назад

i was wondering about that myself. running the downspout into the other gutter seems like the go to move.

@VROOOOOOOOOOOOOOOM 2 года назад

Plus it's pushing the water sideways against the shingles, which could push water under them. Could end up with leaking and rotting.

@gonzaloalmada9948 2 года назад

Great video to get an idea on how to install tin gutters!! Thanks!

@dob3079 3 года назад

I tried using the seam pieces to hold two piece together and it did not work, the entire piece flopped and had excess adhesive all over it. I ended up getting a small pop rivet tool and riveted the two pieces together with a small bead of adhesive to seal it. Made 16 feet of gutter into one big piece! Wish I did it like that the first time I wasted At least 20ft of gutter messing with those stupid seam strips

@jlsszr8327 4 года назад

Thanks. Really helped.

@JohnHilman1968 5 лет назад

Your high side should not be all the way to the roof. If snow or ice comes off that roof it’s gonna take that getter with it. Take a straight edge. Level or whatever and slide it down the roof until it meets the front edge of the gutter the drop the gutter down the facia board until the straight edge clears the front edge of the gutter, this will allow the snow or ice to slide past the gutter in the winter.

@joshuaburt245 5 лет назад

John Hilman thats a joke

@joshuaburt245 5 лет назад

You want it as high as possible. If you have it as low as you say water will just fly over the gutter. If you screw the gutter with hangers 2 feet apart. Long screws and zips in it. Also seamless gutter. It’ll be fine unless there is an excessive amount of snow or ice. Which would have damage the gutter either way you do it.

@bigalsguttersandlandscapes909 5 лет назад

Joshua Bert you are wrong the Carter should be below the snow slide line I have seen it many times were the high end of the gutter gets ripped off from ice sliding

@Exclusive_Criminal 4 года назад

Joshua Burt you are absolutely wrong. You can’t have the gutter higher then the roof line. Ice dam will rip it right off.

@johncasebolt3165 3 года назад

Great video! The spider and the bee 😆

@eliseleonard7556 3 года назад

Thanks man! This helped a lot!! ❤️

@wyndiefeatherstone948 8 месяцев назад

You did a great job! I have just had a new roof installed and I was going to remove the old gutter and replace it with new ones. My problem is they covered up the nails that hold the old gutter on with the drip edge. Now I dont know how to remove the old gutter without ruining the new drip edge. My other problem is putting up the new gutter which will not be under the drip edge now. Do you have any advice?

@samiryounes9670 4 года назад

good job man..thanks for sharing

@ISawYouMushroomHead 3 года назад

Great job thanks

@Zoovfam 4 года назад

I dig the random flip flops at 11:05. Lol. But thanks for the video. I've been thinking about doing this myself or hiring someone. It looks pretty simple but I have a pretty bad fear of heights. Whew.

@Samy-hh1wn 4 года назад

I love you thank you a million times

@gutterdownspoutimprovement7418 4 года назад

The aluminum that they sell in-home depo or lows in more thinner but it as effective as any other. Thank you for sharing you experience in your video.

@zedwpd 2 дня назад

Aluminum gutters are typically available in gauges ranging from .019 to .032 inches. Based on the information available on Lowes' website, some of their aluminum gutters are manufactured at 0.026-inch thick aluminum, which is considered a medium-gauge thickness.