Installing LED headlights in my 1994 Toyota

Подписаться 981

Просмотров 313 тыс.

50% 1

In this episode I update the headlights of my 1994 Toyota. The stock headlights were dim and kinda yellow/brown. Even the high beams were sucky. Instead of just replacing with similar sucky ones, opted for LED. Come to find out, Toyota uses a switched ground as opposed to a switched positive. This meant I needed to add some relays to use the factory wiring as the switch and the new harness to get the power. In the end the results are amazingly different. Such a nice clean white/blue light that lights up the road. The high beams are super bright. The low beams are diffused enough the I don't get flashed too.
Highly recommended. If your interested, check out the links below and leave a comment or questions if ya got 'em. Thanks!
Updated to reflect similar products that can be found and purchased
Headlights:
amzn.to/34cylUz
This is for similar headlights and is an affiliate link
Harness: This is similar to the one I used and purchased
amzn.to/3r0kgmK
This is an Amazon Affiliate Link
Other Cool Products:
American Flag decal: amzn.to/39HANUU
Toyoda sticker lol: amzn.to/2LC5Utf
Piss on Jeep: amzn.to/2XR5fqj

Опубликовано:

4 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 374

@oseanpower 4 года назад

I spent 20 years working on my house and restoring cars and my kids grew up so fast that I missed it. Spend all your time with your daughters! That Toyota will last your whole life but your daughter will be gone in no time.

@gooutsideandplay4975 4 года назад

Man that’s the truth! My daughter have grown up so quick. Just picked up a truck for my oldest as she’s going to start driving. WTH? Where did the time go? The start of another chapter with her. I hope you have the time now and get to spend a bunch with your kids. Make it a great year!

@totalannihilation9065 5 лет назад

Don't care about the lights that blind everyone who drives the opposite way. But your truck is nice. I dig old Toyotas.

@Hattaway4357 5 лет назад

Man you seriously saved my life with this video. Thank you so much. I chased this in my 93 Toyota for a week before I decided to just google it and found this. Lol lifesaver.

@gooutsideandplay4975 5 лет назад

So glad that it helped you! Yeah I was not expecting the lights to be switched ground and had to do some research too!. What else have you done to your rig?

@wendellcrossley 3 года назад

@@gooutsideandplay4975 me too brother thank you

@jesse7055 4 года назад

Thanks so much, I was wondering why they did not work on my hilux, now I know what to buy!

@gooutsideandplay4975 4 года назад

Awesome! Glad it helped you!

@blessedwithchallenges9917 3 года назад

Oh my gosh, your helper and supergirl are so cute!

@gooutsideandplay4975 3 года назад

Thank you. It’s fun to look back at these and see how much she’s grown. What kind of project are you working on? Hope this video helped you.

@plin20000 4 года назад

3:53 your kids are hilarious, you're a lucky man!

@gooutsideandplay4975 4 года назад

They are the best and make me lucky for sure!

@sassyrav 6 лет назад

I have a 2WD 1999 Xtra Cab. Yeah theyre nice utes I agree. Im doing the LED upgrade too with the same ones (in chrome) and i cant wait to install them!! I read what we need is a 'H4 Headlight Ceramic Relay Wiring Harness Kit.' We can get them on eBay for around $20AUD which covers both headlights so thats now on order.

@sassyrav 6 лет назад

I installed the kit and only low beam works -_- if i change the low beam and high beam wiring in the plugs then the high beam works but not the low beam....

@gooutsideandplay4975 5 лет назад

Coral P sorry. Just saw this. Did you ever get it straightened out? And what relay did you buy? Seems odd that it doesn’t work and you shouldn’t have had to rewire to get only one setting.

@austinstilwell5640 5 лет назад

You mentioned doing an led bar on the front. I'm interested in seeing that get done. Sounds like a great idea! Interested in doing it myself

@gooutsideandplay4975 5 лет назад

I will work on that soon as well as the driving halo lights. Saw a person hook them up easy. Before I share I want to try.

@DirtGarage 6 лет назад

Nice truck man! I gotta upgrade my lights soon too! Mine is a 89 Pickup, 3.4 swapped, Supercharged and SAS.. Haha, I did the major mods first 😂

@gooutsideandplay4975 6 лет назад

Dirt Garage wow. Bet that's a sweet rig! I would do that to if I had the funds. Just happy to have this in the line up and do minor upgrades. We use this as a truck for various stuff, was my daily (but the kids are getting a little to big to all shove in) and does light trails ok. Wish I could do SAS or be 2 years newer with coils. Hope this helps when you do upgrade lights.

@gooutsideandplay4975 6 лет назад

Dirt Garage I've thought about motor swaps but am thinking the cummins r2.4. More power and better fuel economy. Maybe when I move out of California lol.

@lilashilo 3 года назад

thank you very much for you're sharing!!!

@gooutsideandplay4975 3 года назад

My pleasure!

@rodelpunongbayan791 2 года назад

thanks for sharing. good day!

@fahimshahriyar2801 5 лет назад

Amazing video!! Waiting for your next one. Love you from Bangladesh!!

@jackthornton3496 5 лет назад

Thx for the vid ..doing the same to my 1998 Hilux 3 litre Diesel soon ! thx from Melbourne Australia

@gregoryrowe936 4 года назад

Where abouts in Aussie are you getting your lights from .I'm looking for a pair for a mazda

@brucemcclendon6145 5 лет назад

Gee, I'm sure glad you show'd everyone how to do that! Some people just LOVE to see themselves on a video

@gooutsideandplay4975 5 лет назад

bruce mcclendon hey Bruce. Not sure if complimenting or being sarcastic 🤔. So I’ll take as compliment and say “thanks!” I did it as why not, and a lot of videos were multiple parts and over complicated. This was an easy, low cost, but still effective way to go that I could do. Hope it helped you.

@dustinbullard6635 6 лет назад

This video was a big help man, great job on the video

@yoteyeet5601 5 лет назад

1994 is near the end for all Toyota truck fully boxed frame.

@apocalypse__6257 4 года назад

Super helpful!! Wish you did a step by step on how u installed the relay tho! But otherwise great video man thank you

@gooutsideandplay4975 4 года назад

Glad it could help. The relay want to bad. Just used a coat hanger and fished it in front of the radiator. Zip tied it to the stock wire loom. Nothing cut, just abandoned in case ever go back, but still haven’t. If you have any questions on how to do it let me know. And if you’ve done it already what do you think?

@tbeger11 5 лет назад

Great video!!! Looks amazing! Thanks for the link. I’m ordering some for my trucks.

@Raevenswood 5 лет назад

nice man! much appreciation I've got an 86 4runner, same system as your truck and honestly I've had to drive with the brights on all the time and them aimed down like low beams ... I just ordered a kit that has the relay harness and was wondering how the relay harness works... your install is the best on on youtube. thank you.

@gooutsideandplay4975 5 лет назад

Raevenswood wow. Thank you for the awesome words. I hope they work out for you!

@Raevenswood 5 лет назад

Go outside and play !! Worked like a charm ... so much nicer to have modern headlights!

@gooutsideandplay4975 5 лет назад

Raevenswood awesome!!

@BernonCars 6 лет назад

They look weird since they’re so dark compared to the chrome lol

@gooutsideandplay4975 6 лет назад

It does look different, but I like it. The truck is on the darker side anyways. It my truck was white, then it would look really weird. Lol. The company has some new designs this year, I was thinking about trying one out...(btw these still work great)

@kaziboygamer 5 лет назад

@@gooutsideandplay4975 find out if u can get the indigator housing with a black background that will make it look wayy more amazing

@gooutsideandplay4975 5 лет назад

Kaziboygamer that would be cool. I’ll have to look into colored LEDs for the indicators and have to use a clear lens with black background...🤔. That would be cool.

@kaziboygamer 5 лет назад

@@gooutsideandplay4975 good luck I wish you the best and don't forget to make a vid if your doing anything else

@SABjork 5 лет назад

I would have loved to have seen how you get the grill off with all those clips.

@gooutsideandplay4975 5 лет назад

SA Bjork yeah it was a pain. First have to take off side markers by unscrewing the screws and prying out towards the side of the truck. All the clips I used a small flashlight and had to reach up through the bottom to pinch them.

@JosephMBoyer 4 года назад

they pinch bro... i have done it too many times and theyre all broken on mine I use zip ties now works fine

@stoker20 3 года назад

Getting it off is the easy part. I'd be tempted to loosen up the bumper and tip it down a bit to make lining things up a little easier on the installation?

@3.0colorado21 3 года назад

I am still trying to count how many different 90-95 4runner front ends I have seen... I have a 95 and my headlights are totally different. I had to keep the ugly stock housing and just go with led bulbs although I wanted this style housing. Either way, I love seeing second gens! Great video

@gooutsideandplay4975 3 года назад

thanks! yes this is the pickup and they had this style lights, even the first Tacomas had like this. the 4runners were more integrated into the grill with the angled sides so I can imagine finding lenses for them is hard to do, but yeah, if you can just change the bulb out, that would be the way to go. with the pu they are usually sealed beam headlights meant to replace the whole unit.

@3.0colorado21 3 года назад

@@gooutsideandplay4975 thanks for replying. My issue now is that I have a completely custom front end and the stock housing needs to go. I think I am going to wire in something totally different.

@gooutsideandplay4975 3 года назад

@@3.0colorado21 got any pics? That would be great to see

@vincenttuncap4420 4 года назад

Great review vid brotha man🤙

@gooutsideandplay4975 4 года назад

Thanks!

@iTzDaNiiLo 6 лет назад

I ordered a pair of led headlights and they came in yesteday. Ordered the harness from the same seller you did and shipping seems to be delayed, unfortunately. Can't wait for it to arrive! Thanks for sharing the process

@gooutsideandplay4975 6 лет назад

iTz_DaNiiLo congrats! Sorry to hear about the delay. I did mine on a standard ship and it took about a week. Well worth the wait. Let me know how it goes and if you have any questions.

@iTzDaNiiLo 6 лет назад

Hey man, just a little update. I got the harness like 5 or 6 days ago, installed the LED's and I'm overall very happy with them. The harness is great, such a time saver! I barely have to use the highbeam as the low beam is so good. Love the light output and how clear I can see the road now. Much needed as the roads are terrible where I live haha. Again, appreciate you sharing the process and throwing the link for the harness in the description. Super helpful

@gooutsideandplay4975 6 лет назад

iTz_DaNiiLo awesome!! So glad I could help and that you did it! Yes it makes a huge difference and helps. I too live where there are no streetlights so good headlights are a must. Share some pics. I'd love to see. My emails in my profile. Thanks again.

@oscarfavela6699 6 лет назад

Thanks, I had this problem with my 1986 4Runner.

@gooutsideandplay4975 6 лет назад

Hope it helped. Have you got your 4Runner working now and if so what did you use/do?

@joeg.1119 5 лет назад

U should upgrade evry single light bulb to leds asap

@gooutsideandplay4975 5 лет назад

Joe G. Working on it 😉

@hideousbastard 4 года назад

@@gooutsideandplay4975 fuck tou prick

@tilligetbig 4 года назад

Thanks for all the pain u saved us!!

@patrickmiethke1479 4 года назад

What’s the brand of e wiring harness

@patrickmiethke1479 4 года назад

Sorry miss typed ... what is the brand of the wiring harnes

@gooutsideandplay4975 3 года назад

You are so welcome!

@Jerrylouis7312 6 лет назад

Couldn't figure out why my brights wouldn't work on my cree leds on my 3rd gen. Thanks for the info.

@Grave500 4 года назад

Yeah it’s nice 👍

@df9333 5 лет назад

although it looks a little bit weird since itself is dark, but nice modify for drive safety

@gooutsideandplay4975 5 лет назад

D Frank thanks! It is darker but I like the look. There are so many options out there. Thanks for watching and hoped it helped. What kind of ride do you have?

@cheesewhiz32 4 года назад

You can pull the grill off with the side marker lights still attached; just disconnect the side marker connectors.

@gooutsideandplay4975 4 года назад

True!

@joshkihe1639 5 лет назад

Good information

@gooutsideandplay4975 5 лет назад

Josh Kihe thank you! Glad you liked it and hope it may help!

@adelaidobernal3745 4 года назад

Good video

@gooutsideandplay4975 4 года назад

Thank you!

@jasonwatkins3653 5 лет назад

Great video man. Thanks for sharing.

@vulcanlamda 6 лет назад

Thank you man i just ordered my new headlights :)

@ferremgurez1254 6 лет назад

Exelente perfecto 👍

@emilaraoz3197 2 года назад

Muchas gracias por hacer este video ya que tengo el mismo problema con mi vagonata toyota modelo 1997 al instalar unas lupad led h4, espero poder hacer el mismo trabajo y disfrutar de una mejor iluminación...realizaste un excelente trabajo...

@heytu67 5 лет назад

thank you for this video. installed the same lights and harness. super easy. can you share the interior dome light you installed?

@gooutsideandplay4975 5 лет назад

brenden tu sorry for the late reply. The interior light was a cheap one from amazon and came in a 2 pack. Unfortunately they started flickering and have both gone out 🤦‍♂️. Thinking of getting a cree one or one from Carquest as the Carquest has a warranty so if that happens again I can get it replaced. If you found a good one, please let us know.

@magalirojas8189 2 месяца назад

Let's be grateful before LED lights came into existence. There are more accidents now with LED than with incandescent.

@andrewhardcastle7982 5 лет назад

Fantastic video !

@scottskinner6060 5 лет назад

Love the truck I have a 92

@familycool9976 6 лет назад

Thanks for the video and for the links ....!!!!

@gooutsideandplay4975 6 лет назад

Family cool 99 your welcome. Hope it helps!

@bodeeweiser3332 2 года назад

I got ones with the built in blinkers and I have no running lights, used same harness and everything

@popitgood3456 6 лет назад

I think I own this truck as of today

@gooutsideandplay4975 6 лет назад

PoP ITgood maybe one like it but I'm still sitting in mine 🤣

@popitgood3456 6 лет назад

Go outside and play !! Ok thanks it's good to know. I swear I just bought one just like this

@gooutsideandplay4975 6 лет назад

PoP ITgood that's awesome! Love my little Toyota and have yet to have anything really bad happen to it. Just a clutch going out. Now I run the marlin crawler clutch. Not for rock climbing really but because it has a stock feel and heavier duty parts. Soon I have to change out the tie rods and ball joints in the front. Any interest I. A video on that?

@slprn67 6 лет назад

Thank you for sharing.

@genesisboston148 9 месяцев назад

On my car I did the negative relay harness for some reason the high beams comes on then you gotta push the switch backwards to turn on the high beam which on a normal car you would click it toward you to flash the high beam

@dustinbullard6635 6 лет назад

Got the same headlights and the same harness, waiting for harness to get here Monday. And hopefully they work

@jessejones5917 5 лет назад

What is the harness called?

@zaubermac5780 3 года назад

Great video, thanks! Did you ever get that lightbar? Great idea about the extra headlight plug. I was wondering how it worked out?

@gooutsideandplay4975 3 года назад

Not yet. will do very soon. Been busy with major changes in my life but will do this week and post. idea is simple and should work. honestly found with these headlights that instead of a small light bar, two pod flood lights may be a better option to shine to the side more. I have a set of both and will compare!

@jsweet2108 6 лет назад

Mine is a 91 standard cab 3.4 swapped! Bought those exact headlights lol.. haven't put them in yet Bought that harness as well

@gooutsideandplay4975 6 лет назад

Josh Sweet sounds like a nice rig! Are you in California? Will have to give a warning if you live in a foggy area. We sometimes get fog and these on low put out too much light up high. I am going to put a smaller lightbar where my license plate should got and use that just for fog if we keep getting it. Good luck and let me know how it goes!

@jsweet2108 6 лет назад

@@gooutsideandplay4975 I'm in Florida. I actually planned on a 30in light bar or something in the front somewhere... where I'm currently at it doesn't get real foggy.. the whole truck is currently ripped apart getting primed and ready for paint... using monstaliner bedliner as my base coat

@kainrodriguez8869 6 лет назад

I have a 93 sr5 pickup.. Just got my hid lights in yesterday.. They didn't come with relays!(

@jsweet2108 6 лет назад

@@kainrodriguez8869 gotta order that harness separate

@gooutsideandplay4975 6 лет назад

@@jsweet2108Nice. I am thinking about doing the raptor liner instead of paint. May be another couple years as the paint and body isn't that bad now, but i don't intend to be too nice to it so I'll see how it holds up. Then maybe it will be time. So are you going to paint over the bedliner or just get it colored the way you want? I haven't heard of monstaliner.

@perezrigo6660 5 лет назад

Good jab looks great

@gokartbuyer 5 лет назад

Different strokes for different folks, I'm glad you're enjoying those lights! Nice video although, not a particular style of headlight I care for, video was nicely done. Personally I chose the Vision X sealed beam replacement housings. The visibility is far better, they're constructed with glass, and they look like improved OE lights and not like a fly's eyes.

@FreerideWalrus 3 года назад

Great video! i just installed these same ones on my 95 pickup last week. interesting that you had to swap out the factory harness to get them to work, mine plugged right in and fired up. Have you tried to get the DRL's to work, or know anyone who has? I tried running wire off the DRL pigtails back to the fusebox and tapping into the DRL circuit but it didnt do anything. Thanks!

@rocknrollermann 4 года назад

i have a 1999. and i hope there's an easier way. i dont wanna rewire stuff.

@gooutsideandplay4975 4 года назад

Sorry for the late reply. It really wasn’t that hard. What did you end up going with or choosing to do?

@tomsohriakoff1079 2 года назад

Used same wire harness and works perfect, but high been indicated on dash does no work....any suggestions?

@RobHTech 4 года назад

Oh. It might be, and probably is, wired that way because it uses a single bulb, dual filaments.

@gooutsideandplay4975 4 года назад

You mean why Toyota used switched grounds? Filament doesn’t care which way current runs through it so it works and from my understanding using switched grounds if something happens, doesn’t cause the interference with other electrical components. 🤷‍♂️

@RobHTech 4 года назад

@@gooutsideandplay4975 Yes. Toyota typically uses a negatively switched circuit design for the headlights. Correct that the filament will light up no matter which way it is connected. --But, in your case, the light you bought was designed with a positively switched circuit in mind, which is why you had problems. Also, LED headlights have various forms of hi/low. ---Also, if the vehicle has an alarm system or remote keyless entry then the computer needs to be able to turn power on/off to the lights. In this case, a NPN transistor circuit design is used many times with a relay just because it is easier, more convenient, and easier to dx a problem. ---In your case, I would have opened up that light you bought, checked the wiring, and simply changed the input/output design to match the Toyota system, rather than hook up more relays. But, you could have just bought the converter kit online.

@gooutsideandplay4975 4 года назад

RobHTech didnt think of changing the light itself! That’s pretty good idea. Not sure I’m that good, and the really was inexpensive. I watched other videos and researched how others did it online and they were building their own relay systems, but using two on each side. Seemed excessive and the one I got worked. Another reason I decided to go with relays that get power direct from batteries is that I read it would be good for hid and other more power hungry headlights if I ever decided that I didn’t like the LEDs. So far I am very happy and will cross that bridge when these fail. Of course we will see what fails first, cheap relays or cheap lights 🤣

@codymiddleton3671 6 лет назад

Can you post the link to the wiring kit I don’t see it in the comments

@gooutsideandplay4975 6 лет назад

m.ebay.com/itm/2-Headlight-H4-Headlamp-Light-Bulb-Ceramic-Socket-Plugs-Relay-Wiring-Harness-Kit/262483542712 Thanks for watching.

@humbertoalvarado225 4 года назад

What is the name of the ware harness

@williambaker8423 4 года назад

Thanks you

@ElectroV9 Месяц назад

Where could I find a grille emblem that fits that grille ?

@christopherborders270 5 лет назад

Thanks for the video! Can you tell me what bulb I need for the interior dome light? As well as the bulb for the backup lights? Thanks so much!

@gooutsideandplay4975 5 лет назад

Christopher Borders hey thanks for watching. I added a link in the description for a bulb guide. I couldn’t find the exact led bulbs I got for the interior and not sure I’d recommend them anymore as they all started to flicker. Seems to be a problem with some of the less expensive LEDs available. Let me know if this helps. Thanks again.

@TheChapMX 2 года назад

This is a random as heck question...but I have a 92 Pickup and the lower valance on the front bumper is rusted to heck and I need to replace it. They usually come primed and I'm curious, would you call the finish on your's gloss/satin/or flat? Trying to figure out what I need to do as far as paint when I get it. Your truck looks great. Thank you

@gooutsideandplay4975 2 года назад

Thank you. I’d say it’s more of a satin.

@Dmslide77 5 лет назад

I've got some on my 93 but when in low the led' s are very very dim. But when in high they are very bright. And way to fix how dim they are in low? Thanks

@edwincotom7536 5 лет назад

Saludos desde Guatemala

@wendellcrossley 3 года назад

Where did you get the dome light replacement light

@athaothao2880 6 лет назад

nice 1994s toyota

@ivanvalenzue68 6 лет назад

Great work man! Do you think those headligths will work on a 1989 toyota SR5?

@kainrodriguez8869 6 лет назад

Did yew get the swap?

@overland8081 5 лет назад

Yes they will..89-95 is same body style...95 1/2 and on was Tacoma.

@custodiomora1121 6 лет назад

I had to do the same thing to mine 1990 toyota 2wd

@hevydeezee408 3 года назад

Great video was very helpful but I can't find the link to buy the upgrade harness please post 🙏

@gooutsideandplay4975 3 года назад

Thank you for watching. At the bottom of the description there is a link to purchase a harness. Pretty much the same that I got, which after a couple years I could not find so updated my links. Let me know if you can find it. Thanks again!

@hevydeezee408 3 года назад

@@gooutsideandplay4975 found it an just ordered it appreciate the help an quick response 👍 Merry Christmas and happy holidays

@gooutsideandplay4975 3 года назад

@@hevydeezee408 Merry Christmas and happy new year to you too!

@Yoyomaster471 5 лет назад

Ah man what sucks if that I don’t think these lights are in stock anymore

@gooutsideandplay4975 5 лет назад

Andrew Garcia awe well that does suck a little. Amazon does have a few other brands out there and the info would be the same as needing a relay kit. Let me know if you find a good pair.

@elplayer502 2 года назад

I have a pair of those led and have the same problem they don’t work Where can I buy that harness Thanks

@gooutsideandplay4975 2 года назад

Soo sorry I didn’t see this before. I have a link in the description or you can search for headlight harnes for Toyota pickups

@schlomoshekelstein908 Год назад

my 1994 4runner headlights aren't square like yours, they're trapezoid shaped.. wtf?

@rimskypavlov4856 3 года назад

Hello....are those Headlight also for using with Toyota HiLux DC year 2004 ?...Thanks

@shaneaudet6606 5 лет назад

I bought my 1995 with led blue type lights. One is not working now. Can I change the bulb?

@josegalina2181 5 лет назад

Nice video...! Where did you get the led lamps and they sell it by size because I have a Toyota Cressida 1986 and for the use and sunlight they look yellow and pretty bad...!

@iliasleontopoulos6917 4 года назад

great video man. do you know if i have to use the same relay harness for hid xenon kits?

@kushkushogbomb1589 7 месяцев назад

There's supposed to be low beam and high beams

@rocknrollermann 4 года назад

cant you just replace the bulb only with an LED?

@gooutsideandplay4975 4 года назад

Thought about that but had sealed beam before and the housing wasn’t holding up so getting housing and then bulbs and would still probably have to get harness, new headlight to change the look and just run with was what I wanted to go with. But if you have good housings, I think there are some led options and could work.

@matiassariass6940 6 лет назад

woou exelente trabajo

@skykword9062 Год назад

my name is Sky from SUNPIE Technology, we have 5X7 led headlights with RGB Halo, and I was wondering if you are interested in testing them.

@gooutsideandplay4975 Год назад

Yes

@skykword9062 Год назад

@@gooutsideandplay4975 How can I contact you?

@baltazar9865 3 года назад

Did this to my 88 Toyota pickup but I only have high beams now any ideas

@gooutsideandplay4975 3 года назад

Thats a bummer. Sorry to hear that. I would check the grounds and the relays to make sure that there is power getting to the relay from the stock relay. Let me know how that goes. Do you have a multimeter?

@raphaelclarkchristianraran7764 3 года назад

Dude I had these problems on my Suzuki Samurai too...I thought the led headlights I ordered was defective....turns out this is the solution...But i have a question, is it possible to make the “Harness kit” by yourself? I am planning to do it myself

@gooutsideandplay4975 3 года назад

it is, but honestly for the time and the cost of the parts there won't be much if any savings, but yes. totally doable!

@markmorris6002 2 года назад

Hi just a quick question, I've upgraded my 87 4runner with led headlight's and harness but I've no full beam! Any idea?

@gooutsideandplay4975 2 года назад

What do you mean by full beam? Like high beam? Maybe check the connection with the relay itself?

@markm9936 3 года назад

Is there a new link that you can post please? The current one says that it’s been moved.

@gooutsideandplay4975 3 года назад

its been so long that they probably don't sell them on amazon anymore. But the process is the same with any lower cost headlight and there are plenty of them out there. Sorry. Wish I could be more helpful. or are you talking about relay?

@chuy28851 4 года назад

Cool

@reynaldoramirez7051 3 года назад

How can I order the relays or where and the extact name sorry can’t find it kind a new to this 😬😬😬

@ericduran21 6 лет назад

Thanks for the video got the same truck and I couldn’t make it work

@gooutsideandplay4975 6 лет назад

Hope this helped. There is a link for the relay/harness set in the description. Still working for me so I'm happy with it. Thanks again and hope you are having a good Christmas.

@sjssjs7107 6 лет назад

Did you have to use the pig tail & switch wiring,Im still not able to get hi and low..

@sjssjs7107 6 лет назад

Maybe I should delete the pig tail and go with just the harness?.

@gooutsideandplay4975 6 лет назад

Sjs Sjs the harness with the relays plugs into the factory harness. The lights then get there power from the battery. The harness and relays convert the factory switched ground to switched positive so you don't have to change or add switches for the new headlights. The factory harness and switch tells the relays to send power which with the harness and relays from eBay, get the power from the battery. Hope that makes sense. Basically the switched ground becomes just a switch for the new relays as they don't care which way the power runs through them and they don't use the factory harness for power.

@gooutsideandplay4975 6 лет назад

I guess I should ask which pigtail you were referring on using or loosing?

@lorentracy006 2 года назад

Do you happen to know if there is anyway to swap the sealed beam lights that were in your truck originally into a 4runner that currently has composite type? I have a 94 4runner and got a new grill/headlights but what they sent is your style. Grasping at straws hoping somebody knows if it can be done. Thanks!

@gooutsideandplay4975 2 года назад

Not sure. Typically it’s a whole different grill and guys would swap there truck ones out for the 4Runner ones. You can see if someone local to you wants to do that but that’s a lot of work for a headlight.

@advancedconcrete5838 4 года назад

Where did you get that housing/bucket for the sealed beam LEDs? Those headlights do not fit me 1995?

@vincentamerena7302 5 лет назад

Need to get the dome light upgrade I have to use my phones flashlight in the car even when it is on aha

@gooutsideandplay4975 5 лет назад

Vincent Amerena they were LEDs I found on Amazon. They were sold as as a 2 pack. Since filming this though both bulbs have had errors and flicker 🤦‍♂️. They strive like a haunted house. Will be getting some more though, different brand, and trying them out. I’ll let you know. Or just buy bulk led from eBay and change them every 6 months. It is nice having the bright light while it lasts.

@vincentamerena7302 5 лет назад

Go outside and play !! Yeah thanks

@randyscheid3303 4 года назад

Did you hook a light bar to the factory harness ?

@jimc12 4 года назад

I've got a 1994 SR5 4runner. The front looks similar to yours but the headlights are flush with the corner lights. The rest looks identical. I wonder if these will fit on it?

@gooutsideandplay4975 4 года назад

Not sure if they would. Looking at pics, seems the 4runners lights are not rectangular but angle in the inside to match the grill. I don’t know if a regular rectangular light would be able to be fit and use the same bracket. May have to swap out just the bulb and may still need the adapter harness. 🤷‍♂️

@KCautomotive 4 года назад

Does the high beam indicator light still work in the instrument cluster after installing this relay harness? Having some trouble with another DIY relay kit. Thanks for the great video.

@gooutsideandplay4975 4 года назад

Mine still works. Head some people say that it doesn’t not sure what would cause it though.

@tomsohriakoff1079 2 года назад

My high indicted does not work either...find any answers

@ru2yaz33 4 года назад

How's the beam pattern because I don't want to blind other drivers.

@gooutsideandplay4975 4 года назад

Ru2yaz it doesn’t have a cut off like hids would have so it is bright up high. Compared to new cars it may be a little brighter, and with all the other LEDs around here, not really different. In the couple years I daily drive this, ive only been flashed like 2 or 3 times so either it doesn’t bother others, or they just don’t flash 🤷‍♂️. Pros: with light up higher, street signs are a lot easier to read at night Cons: fog. Medium to heavy fog and the lights will reflect back and make it hard to see.

@bigoneish 6 лет назад

Theyre alright

@dkimbell12 6 лет назад

Could I get a link to the place where you purchased the relay online?

@gooutsideandplay4975 6 лет назад

m.ebay.com/itm/2-Headlight-H4-Headlamp-Light-Bulb-Ceramic-Socket-Plugs-Relay-Wiring-Harness-Kit/262483542712 There ya go! What kinda rig do you have?

@benoreilly7219 6 лет назад

Thanks for the link iTz_DaNiiLo great Vid. Bought the same LED lights but here Downunder in OZ Australia having loom shipped from the States. Cheers & Beers from me as it's Australia day tommorow Jan 26th so I'll throw a prawn on the Barby for you!!

@gooutsideandplay4975 6 лет назад

Ben O,Reilly that's awesome! Your welcome and please send some pics when done! Of the lights, prawns too if you want. 😂

@jimc12 4 года назад

Hows the glare for oncoming traffic? Do you get the feeling your blinding oncoming vehicles? Does it have a nice cut off?

@gooutsideandplay4975 4 года назад

No cut off. I do think that it may be a tad bright, but not that much different from new stock headlights on some of the cars driving around. Only been flashed a couple of time over the years of having them so guess others don’t mind or are used to leds.

@jimc12 4 года назад

@@gooutsideandplay4975 I've got a 1994 4runner and I can't find led headlights for it. Its different from yours and has the same headlights in the 1995. The kind where you put the bulb in the back. I'm thinking about taking them out and putting your style in. Thanks for your reply!

@MsKewi-NYC 5 лет назад

Can't you just get a LED plug in with the same lens? I know it won't be as brite as that whole LED system. But would it be brighter than that dim yellow light bulbs?? Is there a brand LED light bulbs you recommend?🤔

@gooutsideandplay4975 5 лет назад

MS Kewinyc the old were sealed beams. Would have to get a new housing for them and would still have to do the harness or rewire the led bulb due to Toyota being a switched ground as opposed to a switched positive. And at the end of the video you can see that the old lights weren’t sealed anyways and would last much longer. So just easier this way. No matter what lights I decide to go in the future, the harness will allow me to do whatever so the harness is a good thing. I am still running the lights and like em. Only downside is in fog because they don’t have a cut off, I do get glare.

@aztecwar 6 лет назад

Great video!! Can you please show me the link where I can get the led dome light for my 89 Toyo!!??

@aidanlutley7119 6 лет назад

Sims skate I'm looking for the same. Went to AutoZone other day and tried the bulb that was suggested but it was too big

@MsKewi-NYC 5 лет назад

I got some in O'Reilly's they were cheaper than Auto Zone shockingly but eBay or Amazon works too.

@zacharynewcomb8508 3 года назад

So what do you do with that extra plug in next to the 3 prong female end?

@michaelkamakea2567 6 лет назад

where did u buy your lights from? Interior included.

@DefSquadFan 4 года назад

I was going to try and install a headlight but now that I know I have to take the whole grille off.....forget that I'm going to the dealer.

@gooutsideandplay4975 4 года назад

You know it’s not that hard to do really once you start. Best to do during day or with a good flashlight. You can do it!

@DefSquadFan 4 года назад

@@gooutsideandplay4975 Too late. I didnt have the patience to try and get those plastic clips loose. I might break it. I took it to the Toyota dealer. $140 parts plus 2 hours of labor.