Тёмный

Installing Rough Country 6 inch Suspension Lift Kit 

Michigan Truck Spring
Подписаться 7 тыс.
Просмотров 157 тыс.
50% 1

Rough Country 6 inch Non-Torsion Drop Suspension Lift Kit 27220A for the Chevy Silverado and GMC Sierra 1500 gives your truck a killer look, greater clearance and better handling. The kit includes lifted knuckles, front and rear steel crossmembers, non-torsion bar drop brackets and 6.25 inch rear lift blocks. Also included are front and rear Nitrogen charged N3 shock absorbers are designed to preserve your factory ride quality and feature 10-Stage velocity sensitive valving.
For more information or purchasing options please visit:
www.truckspring.com/products/...

Авто/Мото

Опубликовано:

 

5 сен 2018

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 45   
@ayeyogalaxy6524
@ayeyogalaxy6524 Год назад
Torsion bars are gonna be where I'll have to walk to autozone for the tool
@Mxl100
@Mxl100 2 года назад
Very well made vid.
@MarcJMusic
@MarcJMusic Год назад
Well it crossed my mind to do this myself but uhhh, I'll stick to barbells and computers. I'm bringing it to the pros!!!
@EduardZ3249
@EduardZ3249 3 года назад
I just did this to my 2004 gmc sierra 2500hd 4wd. After watching the video 50 times I said no thanks, lol. I'd rather take to shop and work it off. $820 later with 2 inch rear spacers and alignment.
@adenseay7406
@adenseay7406 3 года назад
Why can’t you just make a torsion bar drop so I can install it on my RC 3.5 torsion lift?
@B4Lsoowoop
@B4Lsoowoop 5 лет назад
Is this the same for a 97 k1500
@jamesdegraff
@jamesdegraff 3 года назад
Longer driveshaft not required?
@dsaldana9859
@dsaldana9859 Год назад
Is it possible to do this with jack and jack stands or do I need to bother my friend for his car lift?
@RuFLeSsgaming
@RuFLeSsgaming 11 дней назад
I installed the front so far but my break hoses are not long enough now that the lift is on any help?
@NotUltimate3
@NotUltimate3 Год назад
Does the configuration matter? I’m new to trucks and it’s confusing me
@jeffscott3160
@jeffscott3160 3 года назад
Can the this kit be left at 4-4.5" or is it a full 6" only kit.? I have heard other kits advertise as 4"-6" lift.
@Truckspring
@Truckspring 3 года назад
This kit is only a 6" leveling lift. It does not offer the option for a lower height. Depending on your application we may have a 4" lift available instead if you are interested in a lower lifted height.
@SirGuidemere91
@SirGuidemere91 3 года назад
I can turn a wrench, but I’ll let a shop do this one since cutting of the frame and everything else is necessary.
@elvisgomez2944
@elvisgomez2944 3 года назад
same
@MobilEyes
@MobilEyes Год назад
Dude you got this ain't nothing to it but to do it bud
@MobilEyes
@MobilEyes Год назад
It's simple really
@SirGuidemere91
@SirGuidemere91 Год назад
@@MobilEyes I have since checked a suspension job and cut off my list 🫡 it’s way more intimidating than it is difficult, that being said. I definitely measured twice to cut once lol. Thanks for the support though. 💪🏻
@garrettknight8550
@garrettknight8550 3 года назад
Looks easy
@Anonymous-lf9bc
@Anonymous-lf9bc 5 лет назад
Do you need a vehicle lift? Or would floor Jack stands provide enough clearance for installation?
@Truckspring
@Truckspring 5 лет назад
This lift can be done on jack-stands. It will take some extra time and you will want it supported by the frame but plenty of installs on this kit have been done without a vehicle lift.
@brysonh3490
@brysonh3490 3 года назад
is this for 1997 k1500 too? Just asking bc I’m new to all this and I have a truck that I want to lift and I need to know if I have to shave some stuff
@Truckspring
@Truckspring 3 года назад
Rough Country kit 25370 fits the 1999-2006 Silverado 1500 and will not fit a 1997 K1500. Kit 27630 fits the 1997 K1500's.
@claysumm5398
@claysumm5398 3 года назад
I want a lift kit but have no idea how to do all of this. Anyone have any idea wjat someone would charge to install one for me? Shops or backyard mechanics
@Truckspring
@Truckspring 3 года назад
The rates will vary with your local market. Rough Country provides average install times for their kits. Ex. This kit 27220a has an average install time of 8 - 10 hours. You can contact your local shops and inquire about their labor rate and they should be able to give you an estimate.
@cullenmcelroy7828
@cullenmcelroy7828 4 года назад
We’re you able to keep the dust shield on after installing this lift kit?
@Truckspring
@Truckspring 4 года назад
The brake dust shields can be retained and installed on the new knuckles.
@pat14lang
@pat14lang 5 лет назад
new C.V. Axles but no new control arms?
@Truckspring
@Truckspring 5 лет назад
The original CV axles are typically re-used with this kit. In the installation video they were replaced due to condition issues. Lifted control arms are not necessary because the design of this lift kit uses a sub-frame drop and a lifted knuckle to keep the control arms close to a stock position.
@pat14lang
@pat14lang 5 лет назад
i didn't mean aftermarket control arms. from the looks of the condition of the control arms, why not replace them when installing a new lift kit? or replacing any other steering/suspension components...based on the age/condition of the vehicle that is
@Truckspring
@Truckspring 5 лет назад
In this install the upper control arms and the CV axles were replaced due to issues with condition. It is always advisable to replace any worn suspension or steering components as soon as you discover they are worn. Despite the appearance of some components they were not worn at the time of installation so they were not replaced. @@pat14lang
@gurutrips9440
@gurutrips9440 4 года назад
Will this same operation work on a 94 GMC suburban k1500?
@huxleyjamison5153
@huxleyjamison5153 3 года назад
pro tip : you can watch movies at flixzone. Been using it for watching all kinds of movies recently.
@kendallbrayden212
@kendallbrayden212 3 года назад
@Huxley Jamison Yea, I have been using flixzone} for months myself =)
@dantebilly6941
@dantebilly6941 3 года назад
@Huxley Jamison Definitely, have been watching on Flixzone} for since december myself :)
@brennankohen6366
@brennankohen6366 3 года назад
@Huxley Jamison Yea, I've been using Flixzone} for years myself :)
@denverfrancisco3365
@denverfrancisco3365 3 года назад
@Huxley Jamison yea, I've been watching on Flixzone} for since december myself =)
@ugeiddathlang1899
@ugeiddathlang1899 3 года назад
Will this fit on a 09 hybrid silverado
@Truckspring
@Truckspring 3 года назад
This 27220A kit will only fit up to 2007 models so it will not work on a 2009. The Rough Country 23630 is a 6" lift that will fit a 2009 Silverado 1500 Hybrid 4x4.
@ugeiddathlang1899
@ugeiddathlang1899 3 года назад
Michigan Truck Spring thank you so much
@Truck_Master_Mike
@Truck_Master_Mike Год назад
How long is the install time on this one??
@Truckspring
@Truckspring Год назад
Rough Country estimates 8 - 10 hours to install the kit.
@Truck_Master_Mike
@Truck_Master_Mike Год назад
@@Truckspring Awesome.. thanks
@animalmother263
@animalmother263 4 года назад
Could you estimate the labor hours to install this kit for a skilled mechanic? Can you estimate the hours for an idiot with a wrench?
@Truckspring
@Truckspring 4 года назад
Rough Country estimates the installation at 8 - 10 hours for a skilled mechanic. It would be safe to double the hours if you do not have experience.
Далее
6” ROUGH COUNTRY LIFT INSTALL!
33:40
Просмотров 93 тыс.
Your bathroom needs this
00:58
Просмотров 11 млн
What Comes with a Rough Country 6" Lift
16:44
Просмотров 81 тыс.
SumoSprings vs. Timbren
6:53
Просмотров 529 тыс.
BEST TORSION KEY LIFT EVER!!
13:48
Просмотров 1 млн
Top 5 Problems GMC Chevy Truck 4th Generation 1988-02
7:46
Rookie Mistakes When Lifting Your Truck!
5:48
Просмотров 1 млн
10 Minute Cam Swap!
10:17
Просмотров 915 тыс.
Air Fittings - How to Properly Cut and Connect.
4:39
Охлаждение вариатора
0:59
Просмотров 926 тыс.
БМВ i4
0:29
Просмотров 1,9 млн
Спорткар с двумя моторами 😜
0:35
5 минусов работы
0:53
Просмотров 532 тыс.