Тёмный

Installing the Billet Wheel GT3582 Maxpeedingrods Turbo on the 1.8 Chevy Cruze! 15psi of Boost 

Matthew Chevalier
Подписаться 28 тыс.
Просмотров 98 тыс.
50% 1

Installing the Billet Wheel GT3582 Maxpeedingrods Turbo on the 1.8 Chevy Cruze! 15psi of Boost. Dyno Prep.
100$ OFF code for the street performance turbo : Matthew100
bit.ly/3ubpXls
10% OFF code for all maxpeedingrods products : MATTCHEVY
Blow-off Valve link:bit.ly/3CPR7Qa
Maxpeedingrods web: bit.ly/3DK0Ut0
Installing the $113 eBay Turbo on the Chevy Cruze 1.8 Daily Driver Part 1 - • Installing the $113 eB...
The eBay Turbo is Building BOOST!!! Chevy Cruze 1.8 Daily Driver Build - • The eBay Turbo is Buil...
PCV Issues we had - • Something Went WRONG w...
Making an equal length turbo manifold - • How to Make a DIY Turb...
Making a log style turbo manifold - • The DIY Turbo Manifold...
Custom Forged JE Pistons - • Custom Forged JE Pisto...
How to Install an Upgraded Fuel Pump - • How to Install a Repla...
Custom Camshafts for the 1.8 Cruze - • My Reground Camshafts ...
Upgraded Stage 5 Clutch and Aluminum Single Mass Flywheel - • Single Mass Aluminum F...
Be sure to follow me on Instagram to get the inside scoop...
►Instagram - @matthewchevalier
🔔 Subscribe and hit the bell to support me and so you don't miss a thing!

Опубликовано:

 

16 сен 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 178   
@w.r.1356
@w.r.1356 2 года назад
That sounds even better brotha, it's gonna be nasty Lil Cruze when tuned. I can't wait myself. I swear everytime I come in from work I look to see if you have another video uploaded 🤣. Love it
@cmattdabrat
@cmattdabrat 2 года назад
LOL! Probably will put out more this week. At least by Sat or Sun. Just depends on how quickly I can get the work done and edit. :) I appreciate it!
@spankthemonkey3437
@spankthemonkey3437 2 года назад
@@cmattdabrat is this a ball bearing turbo or bushing
@cmattdabrat
@cmattdabrat 2 года назад
@@spankthemonkey3437 It's a journal bearing turbo.
@johnsnow1355
@johnsnow1355 Год назад
One of the best things of this build is the turbo swapping ability based on budget without having to do anything different with the exhaust manifold or intercooler piping 🥰
@builtbybagsy
@builtbybagsy 2 года назад
Loving the frequency of videos, and importantly, all the progress.
@cmattdabrat
@cmattdabrat 2 года назад
Thanks!
@jimhiscott2918
@jimhiscott2918 2 года назад
Matt. You are one determined individual, I'll give you that. Failure is not an option. This engine has ran you round and round but your driven👍
@cmattdabrat
@cmattdabrat 2 года назад
I appreciate that! These things take patience. There's been a handful of times I had to ask myself why I'm doing this again, but just gotta keep the end results in mind. :)
@sosemiteyam562
@sosemiteyam562 2 года назад
Beautiful job Matt. I had no clue you went through hell after you did all the machining and mods last year, having to repair the motor. Good to see your persistence paid off :)! Sounds purrty :3!!!
@cmattdabrat
@cmattdabrat 2 года назад
Thanks! Let's just say I've been finding all the weak spots lol.
@modeverything1
@modeverything1 2 года назад
Man I'm itching to turbo my next project after watching this! Also I believe the more efficient the engine is the less timing it needs!
@cmattdabrat
@cmattdabrat 2 года назад
You're right about that! I'm running somewhat high CR for boost 10.5:1 so could be it needs less, but I swear it spun the wheels before with stock timing, which was another 5º of advance. A dyno would tell me what it likes. At this point just doing everything by the seat of my pants and data.
@MindsMouth
@MindsMouth 2 года назад
I'm currently in Killeen Texas, about 2-3 hours drive away from houston. Got my 1.6L Aveo5 NA tuned to the max factory abilities and CAI but Turbo is where I'm going with the project next. Daily driver turbo. You should get a chevy 4 banger meet going someday =D P>S> I own a 3D printing business, so if you need that custom air filter housing let me know, I'll see what I can do.
@cmattdabrat
@cmattdabrat 2 года назад
That's awesome! Definitely could use some help. There's a great turbo setup that would work and be reliable. Email me. mattc4481 @ gmail.com
@HRTSBRT
@HRTSBRT 2 года назад
You're getting there! So nice! Can't wait to see some numbers! Keep up the good work, i'm enjoying every single video you put out 🤟🏼
@cmattdabrat
@cmattdabrat 2 года назад
Thank you! Wont be long.
@petermoser1012
@petermoser1012 2 года назад
Superb progress after all of the problems, cant wait to see this machine get a dyno tune. Bring it on!
@cmattdabrat
@cmattdabrat 2 года назад
Thanks! Definitely been quite the journey.
@061garage
@061garage 2 года назад
Looks like a good unit. Definitely copper washers. Brass is harder than steel.
@62saki91
@62saki91 Год назад
But it's not.. tensile and ductile testing says otherwise...
@061garage
@061garage Год назад
@62saki91 crush washer are made out of copper
@62saki91
@62saki91 Год назад
@061 GARAGE I was referring to the brass harder than steel part of your comment.. yes crush washers are copper, but brass is softer than steel. It is more ductile ( malleable) and has lower tensile strength than steel.
@Zenki240sxse
@Zenki240sxse 2 года назад
Very excited for the exhaust upgrade, this thing is insane
@cmattdabrat
@cmattdabrat 2 года назад
Thanks! I'm looking forward to seeing how it changes the tone.
@christucker9566
@christucker9566 2 года назад
If you want to get rid of rasp look into Vibrant bottle style straight through resonators, 12” should do it. That’s all I have on my car (3.3T and straight back with downpipes and there’s almost no rasp at all)
@termochiptr
@termochiptr 2 года назад
Now i have a lot of mechanical empathy with my cruze. As always great video mate.
@cmattdabrat
@cmattdabrat 2 года назад
Thanks!
@herminiorivera213
@herminiorivera213 2 года назад
Good job matt finally we can hear that ecotek roar dude!!!! Nice job
@cmattdabrat
@cmattdabrat 2 года назад
Thanks!
@JosefTrull
@JosefTrull 2 года назад
This was a surprise video! Man that's awesome work brother.
@cmattdabrat
@cmattdabrat 2 года назад
Thank you!
@arashtorabi8852
@arashtorabi8852 2 года назад
Hi Matthew I happy to see you getting forward step by step it sund so nice
@cmattdabrat
@cmattdabrat 2 года назад
Thank you!
@GizmoIssa
@GizmoIssa 2 года назад
Add the LS coils. I added them to my 1.6 sonic and it works. The first LS wiring diagram I used had the "signal ground" and "ignition signal" swapped so my car did not start on the first start up.
@cmattdabrat
@cmattdabrat 2 года назад
Definitely want to get back into that. Just taking it a project at a time.
@sincemarchofficial6536
@sincemarchofficial6536 2 года назад
I'm amazed on what you have been doing. How I wish have I the skills like you do so I can work on my chevy cruze.. Love your work man. I'm a fan from the Philippines
@cmattdabrat
@cmattdabrat 2 года назад
Thank you!
@victorwilks88
@victorwilks88 2 года назад
Love what you doing here ... cant wait for the dyno
@cmattdabrat
@cmattdabrat 2 года назад
Thanks! Me too!
@billetbill7286
@billetbill7286 2 года назад
sounds like brian eclipse from fast and furious 1 😂 nice build bud
@cmattdabrat
@cmattdabrat 2 года назад
lol thanks!
@tbas8741
@tbas8741 10 месяцев назад
Thats a very Peaky Power Curve tho, Sadly Wont be much use in normal Traffic/City Driving as rarely will get that high in RPM unless driving hard or on track But sounds Great and 2great results for the costs
@christucker9566
@christucker9566 2 года назад
I didn’t know you were in Houston man, hope to see the build at one of these events one day.
@cmattdabrat
@cmattdabrat 2 года назад
Looking forward to it.
@802Garage
@802Garage 2 года назад
Haha sounds awesome. Woulda been cool to see if you hit max boost sooner with the new turbo.
@cmattdabrat
@cmattdabrat 2 года назад
AR's are still the same. I'll have to check the logs and see what difference there is. If anything, it's built out of better materials and should last longer. Have yet to see it start flash rusting.
@802Garage
@802Garage 2 года назад
@@cmattdabrat Yeah depends on material and all, but typically a billet wheel can either be slightly lighter, or have a thinner nose and other areas to increase efficiency, or both. Doubt it would be huge, but still interesting.
@cmattdabrat
@cmattdabrat 2 года назад
@@802Garage Went back and checked the logs. Billet 3979 rpm - 1 psi 7353 rpm - 15 psi Standard 3238 - 1 psi 7704 - 14 psi The standard version started building boost sooner, but the billet wheel turbo reached peak waste gate boost sooner. Which makes sense seeing as billet cnc wheels tend to be heavier and take longer to build boost, but it's more efficient.
@802Garage
@802Garage 2 года назад
@@cmattdabrat Huh interesting. I mean obviously with tuning changes, weather, what RPM exactly you started the pull, there could be variability. Still cool data! I have a couple turbos I'm rebuilding with upgraded turbine wheels and billet compressor wheels. Hoping they perform a lot better than stock.
@CJKIII
@CJKIII 2 года назад
Be careful with nylon push-lock on the bottom of the wastegate. Had a line melt on me sending boost to the moon.
@cmattdabrat
@cmattdabrat 2 года назад
Yikes.I think I have some metal ones in my spare parts box.
@rubenjimenez1568
@rubenjimenez1568 2 года назад
Lets GOO!! its coming along day by day, I also I needed help with what may cause my Chevy Cruze to shut off by itself, but it starts right back up, auto btw
@cmattdabrat
@cmattdabrat 2 года назад
Thanks! What mods have you done?
@JermJermFlores
@JermJermFlores 2 года назад
Can you do a video on how you did the oil return/feed lines and into the block?
@cmattdabrat
@cmattdabrat 2 года назад
Certainly!
@delatuned
@delatuned 2 года назад
That surge sounds nice.
@cmattdabrat
@cmattdabrat 2 года назад
Love it! :)
@trustme7660
@trustme7660 2 года назад
I cannot wait to turbo my Cruze
@cmattdabrat
@cmattdabrat 2 года назад
Dew et!
@deleerai3156
@deleerai3156 2 года назад
Next episode, turbski rippin hrd on dyno 😂. For my personal preference a lil bit to loud but the bangers are awesome from 2 to 3rd. 😍😍🔥🔥
@cmattdabrat
@cmattdabrat 2 года назад
The FlowMaster FX should help. I don't mind the level, but would like to get some rasp out. Hell yes! Well, have a few more things to do, but hopefully I can squeeze time in this week to get her to the dyno. Just depends on work.
@Blu3Bandit
@Blu3Bandit 2 года назад
Ur endings are epic lol 😆
@cmattdabrat
@cmattdabrat 2 года назад
lol thanks!
@landrystephane92
@landrystephane92 2 года назад
I might need your help when comes the time to tune for mine when I add my supercharger!
@cmattdabrat
@cmattdabrat 2 года назад
Shouldn't be too difficult.
@GuerreiroGuerreiro-b4f
@GuerreiroGuerreiro-b4f Месяц назад
Sou do Brasil mas aqui nao encontrei um kit turbo pra meu cruze 1.8 , gostaria muito de adaptar um
@danielsplayhouse3804
@danielsplayhouse3804 2 года назад
me I'm getting my poor boys fabrication channel setup and I got my project it's a 2007 Chrysler 300 and I'm going to put a Honda k24 turbo engine in it with a 6-speed manual from a RX8. going to be my little luxury cruiser in disguise
@cmattdabrat
@cmattdabrat 2 года назад
Sounds sick af!
@jeankitching8044
@jeankitching8044 2 года назад
Can't wait anymore to see the results🤣
@cmattdabrat
@cmattdabrat 2 года назад
LOL!!! I feel the same way.
@jeankitching8044
@jeankitching8044 2 года назад
@@cmattdabrat gotta get the diesel tuned now, don't wanna get left behind🤣🤣🤣
@ko6uta133
@ko6uta133 4 месяца назад
Hello please tell me how much horses this engine haves after the turbo .This engine is 140 hp
@technicallyeco.2751
@technicallyeco.2751 2 года назад
Fr ☝️, just now watching all ready stoked!!!
@technicallyeco.2751
@technicallyeco.2751 2 года назад
Need some launch control action 😁
@cmattdabrat
@cmattdabrat 2 года назад
Forgot to add that, but have a WOTbox I need to install as well. Just need to find the wiring diagram for my model so we can get some 2 step and build boost off the line and launch hard.
@technicallyeco.2751
@technicallyeco.2751 2 года назад
@@cmattdabrat she bout to party 🥳 haha
@ocurrenciachapina
@ocurrenciachapina Год назад
Hello! In what part of Houston are you located? Will you tune my Focus ST? Let me know please
@rolfjensen6117
@rolfjensen6117 Год назад
get a turbo haircut hippie😋 love this channel.
@cmattdabrat
@cmattdabrat Год назад
lol, already did ;) thanks!
@JoshVC
@JoshVC 2 года назад
Just having a look at the quick hptuners screen you had up, you gotta mess with your tm or sensor config because your throttle isn’t opening fully like mine was until I messed with it
@cmattdabrat
@cmattdabrat 2 года назад
From my understanding, most tb don't read 100% on most vehicles even though you're commanding it. I'll have to verify physically and address it with the tuner once we hit the dyno.
@BulliKid
@BulliKid 2 года назад
Nice turbo!!!
@cmattdabrat
@cmattdabrat 2 года назад
Thanks!
@j-herm3943
@j-herm3943 2 года назад
I have a 2018 Chevy Cruze Hatchback I wish i had the skills and the knowledge to do that to my car I only have basic Mechanical skills I definitely can’t take my motor out and put it back in.. But it’s definitely cool watching the work you have been doing
@cmattdabrat
@cmattdabrat 2 года назад
It's definitely taken time to learn how to do this stuff. Still learning as I go. I appreciate it!
@Blob83
@Blob83 2 года назад
All nice man but is like the 5 time u didnt change that air intake ;D Wasnt better to tune it whit the better airflow from the begin ?
@cmattdabrat
@cmattdabrat 2 года назад
Right! Well, I'm not too concerned about it because I can tune it for whatever changes I make.
@Blob83
@Blob83 2 года назад
@@cmattdabrat nice then ! Cant wait too see what`s come next !
@8SecSleeper
@8SecSleeper 2 года назад
You should get them to send you a 3576 or 3076 and test spool. Yours seems to be spooling pretty slow, you'll have higher avg power if you can be at 20 psi by 4200 in 2nd or 3rd. I find my 60-80 is faster by a long shot with my stock turbo, but 80 - 100 lightyears faster, because the gt3582r simply takes too long to fully spool. I have a 2.0 vs your 1.8. Did you test spool up, overlay logs? There should be a 200 - 300 rpm difference between the billet wheel ball bearing vs cast and journal bearing. Going to 76r should be another 700 rpms faster spool. So you'll see a larger difference there.
@cmattdabrat
@cmattdabrat 2 года назад
I have a 3076. I'm going to test both to see what works best. Both HP Numbers and 1/4 mile times. You're right about the average power. From what I've seen, in the 1.6 variant (same block and head, small dis.) They tend to like high RPMS before you get anything out of them like a Honda. Good point. I'll perhaps upload that as another video. I have logs from both, but really no way to overlay them. I appreciate the solid feedback.
@spankthemonkey3437
@spankthemonkey3437 2 года назад
@@cmattdabrat hit it with a 35 or 40 horse shot of nitrous to spool it and let off soon as it spools😁 cleetus mcfarland sprayed it strait on the turbo fins in his Cummins diesel swapped galaxy car🤣.
11 месяцев назад
This would be perfect if it could spool to 15psi before 4k rpm...
@cmattdabrat
@cmattdabrat 11 месяцев назад
Just install an anti lag
@danielsplayhouse3804
@danielsplayhouse3804 2 года назад
I'm definitely glad to see you're getting your smiles per gallon out of that car I can actually say I'm not too much of a fan of those little Chevy cobalts but that little b¡tch is badass 👍👍😎😎
@cmattdabrat
@cmattdabrat 2 года назад
Thank you! I'm definitely enjoying it.
@mexicangamer6972
@mexicangamer6972 2 года назад
I hope you sell a kit for the 1.8 bc I wanna buy it lol
@cmattdabrat
@cmattdabrat Год назад
Thinking about putting one together.
@nathanblack6128
@nathanblack6128 7 месяцев назад
I'd buy it.
@andymanson1046
@andymanson1046 Год назад
Could add a link for the oil return extented pipe.
@cmattdabrat
@cmattdabrat Год назад
ebay.us/Qavz8T
@sebastianvargas525
@sebastianvargas525 7 месяцев назад
Is there any benefits from 10w30 🤔 I’ve been running 5w30
@andrewatkins1438
@andrewatkins1438 2 года назад
This build is epic dude! What rpm do you see full boost? I would have thought the 3582 turbo was a little large for the 1.8 but looks like it hauls ass!! 🙌🏻
@cmattdabrat
@cmattdabrat 2 года назад
Thanks! Really have to rev it out. Full boost around 6.5k and pulls hard well into 8.2k.
@andrewatkins1438
@andrewatkins1438 2 года назад
@@cmattdabrat good to know thanks Matt! I was going to go the gt3582 on my 1.8L Miata but I chickened out and went with a gt3076 😂😂
@BADAZZGAMER420
@BADAZZGAMER420 2 года назад
That's crazy lol I have the hatchback 2012 I thought redline was like 6-8k but does the turbo increase the redline or just easier to blow engine?
@cmattdabrat
@cmattdabrat 2 года назад
@@BADAZZGAMER420 It's just a big turbo and doesn't start to spool until it's pushing enough exhaust gas lol. I might take it one step down so it's kick in between 4-7k instead of 5-8k. 8k seems to be the limit of what this engine likes.
@PANTYEATR1
@PANTYEATR1 2 года назад
I was gonna ask about the RPM where boost starts building. I have a 2.4L four banger with a compression ratio of 8.8:1 that i want to put a gt3582r on. Ppl say I'll be waiting for boost at like 4k rpms. My redline is 7200
@davesworld2132
@davesworld2132 2 года назад
She sounds spicy!!!!! What gap do you have on the plugs?
@cmattdabrat
@cmattdabrat 2 года назад
Thanks! .20 currently but will more than likely need to decrease that some. Getting a little break up in the higher RPMs.
@davesworld2132
@davesworld2132 2 года назад
@@cmattdabrat Believe it or not that’s why I asked. I was getting the same problem on my car and I had to make the gap smaller. What type of plugs are you running?
@davesworld2132
@davesworld2132 2 года назад
You know I was just thinking after I made my comment that the gap is getting pretty small. I think for your car they make a coil upgrade. Maybe instead of decreasing the gap leave it where it is and you can increase the spark. I’m also just thinking out loud so if my thought process is wrong feel free to let me know.
@julioherrera3554
@julioherrera3554 2 года назад
Good proyect 👍👍👍👍
@cmattdabrat
@cmattdabrat 2 года назад
Thanks
@sinnersconquest9311
@sinnersconquest9311 2 года назад
wanna see u race some ppl
@cmattdabrat
@cmattdabrat 2 года назад
Soon! Just talked to a guy that has a C7 Vette who's down to race. Just need to get her dialed in first.
@Davsoto120
@Davsoto120 2 года назад
I wish you had a 1.4L so I could go on this journey with you, the fitting and specs of the 1.8 and 1.4 are different 😕
@cmattdabrat
@cmattdabrat 2 года назад
Luckily the 1.4 has a lot more support. Aside from a smaller displacement, mine is setup very similar to the ZZP Sonic. Pistons, rods, aftermarket head studs, manifold, fuel pump, 1050x ID injectors...etc. Luckily you wont have to do as much fabrication as kit are readily available.
@Davsoto120
@Davsoto120 2 года назад
@@cmattdabrat that’s trueee, but also to be fair idk how to tune, like how you had to tune your car after the turbo swap, in order to get the fuel ratio back to how it’s supposed to be
@danssv8
@danssv8 2 года назад
As always Matt great video and always improving yourself. Nice to see you getting there. Need to put some (teflon) plumbers tape on the threads to seal the water/oil/air from bypass the threads on the turbo so you don't have leaks. Great job . Hope you sort that exhaust out just to take that rasp out of her , she's a screamer lol 😆.
@cmattdabrat
@cmattdabrat 2 года назад
Thanks for the tips! lol, we'll get those things sorted soon. Just grinding on her daily, or when I have time.
@danielponce729
@danielponce729 2 года назад
I need more information for this please
@cmattdabrat
@cmattdabrat 2 года назад
www.maxpeedingrods.com/product/t3-flange-gt35-gt3582-universal-cast-iron-turbine-housing-perfect-for-30l-60l.html?search=gt35 Use code MATTCHEVY at checkout and you'll get a discount
@kysonreber2658
@kysonreber2658 2 года назад
Awesome!!
@cmattdabrat
@cmattdabrat 2 года назад
Thanks!
@needforspeed6384
@needforspeed6384 2 года назад
Did you make the downpipe yourself or is there any for sale with the same hot side bolt pattern ???
@cmattdabrat
@cmattdabrat 2 года назад
I made it ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-moMrla977GM.html
@jay1185
@jay1185 2 года назад
Duuuuuude yesssssss!!!!!
@cmattdabrat
@cmattdabrat 2 года назад
:)
@jyeesing
@jyeesing 2 года назад
could you share the link for your oil feed line?
@cmattdabrat
@cmattdabrat 2 года назад
I did a custom oil feed. I used just a 3/8" NPT 4 way block, 3/8 NPT to 4an , 4an to 1/4" stainless hard line (if I recall correctly), then to a 1/4" hardline to 4an adapter, to a banjo oil feed. I'll look it up, but got most the parts from Motion Raceworks.
@danrooney3704
@danrooney3704 Год назад
Do you have any updates on the turbo? I'm looking at getting the same one for my 1jz
@cmattdabrat
@cmattdabrat Год назад
I've run it up to 25 psi and has been making some power. Lots of fun.
@tbas8741
@tbas8741 10 месяцев назад
I Know Nobody Asked But Just to be clear, They (MaxpeedingRods) are NOT Chinese Turbo or Car Parts Brand in Any Way ! They are not made in China or Assembled in China, They have nothing to do with Any Chinese Company. They are not even for sale in China and Actually Banned there due to sanctions since 2021, They are Czech, Made in EU. (So of course they are better quality than Anything American or Aussie Made)
@TheBruceKillis
@TheBruceKillis Год назад
These PTC fittings. What size? 1/4 ODx 1/8 NPT?
@cmattdabrat
@cmattdabrat Год назад
Not sure what PTC fittings are. Which fittings are you referring to.
@scottybasham1020
@scottybasham1020 2 года назад
F that other video I was watching 👌🏻
@cmattdabrat
@cmattdabrat 2 года назад
lol
@GaryTaylorvw
@GaryTaylorvw 9 месяцев назад
Hi Matt, this turbo any good for a 3.2 vr6 ?
@cmattdabrat
@cmattdabrat 9 месяцев назад
Will work great.
@zach446
@zach446 2 года назад
Do you have any of your maps anywhere? Been trying to tune mine and would love a csv or something to compare to. Finding E78 maps online is hell. Went for a Kess clone and I'm working on mapping out mine in WinOLS... extra data is useful haha
@cmattdabrat
@cmattdabrat 2 года назад
I don't, what is your setup? With all the mods I doubt the map would do you any good, but I have the stock map as well as it's current setup.
@zach446
@zach446 2 года назад
@@cmattdabrat Looking to do E85 with some 43# injectors (have some cheapo "2000cc" ones too that I found super cheap on Amazon too for funsies) and was planning to hook up a AMR-750 on her along with my DIY "hardware store" water/methanol injection mod I got going haha. If you ever have stock tables anywhere, since I only ever find stuff for the 1.4 on forms. Pretty much just been trying to find more maps/map shapes I can try to recognize in my ECU dump. Though I saw you on a Cruze forum talking about the project; might just make a post and pm you about it
@jeromegouin3449
@jeromegouin3449 Год назад
Water cooling?
@cmattdabrat
@cmattdabrat Год назад
It's plumbed with coolant. Just tapped into the heater lines.
@emanuelroman3369
@emanuelroman3369 2 года назад
La berdaera vestía montando chevrolet
@damonduckett2982
@damonduckett2982 Год назад
At what rpm does this turbo comes to life/spools
@cmattdabrat
@cmattdabrat Год назад
On this 1.8, around 4500-5k and holds well to 7.5-8k rpm.
@w124mercedes7
@w124mercedes7 Год назад
I have a 1987 mercedes with the 3.0L diesel and original Garrett turbo. I would like to add more boost and get a little more power. How do I find out what turbo to look for. I I was told you can adjust the wastegate rod to increase boost pressure. Is this correct.
@cmattdabrat
@cmattdabrat Год назад
Just bleed some of the pressure going to the waste gate. You could get a cheap boost controller that is just allows the boost pressure going to the waste gate to bleed off. If the gate opens at say 8 psi, you can bleed that off so the waste gate isn't seeing 8 psi until it actually has 10, 12... 16 if you want to. amzn.to/42skgig
@angahksg4913
@angahksg4913 2 месяца назад
CAN U REMAP MY CAR CRUZE 1.8 TURBO MODIFI.MALAYSIA SPEC.
@leetuon8184
@leetuon8184 Год назад
Must be on low boost.
@cmattdabrat
@cmattdabrat Год назад
Have been running 18-22 psi.
@damonduckett2982
@damonduckett2982 Год назад
Is this turbo a .82 turbine housing?
@cmattdabrat
@cmattdabrat Год назад
It's the .82.
@LJs_bar_and_grill
@LJs_bar_and_grill 2 года назад
Where do u get the billet oil drain line?
@cmattdabrat
@cmattdabrat 2 года назад
ebay.us/5qv5zG
@marylinpadilla2711
@marylinpadilla2711 2 года назад
Tiff
@cmattdabrat
@cmattdabrat 2 года назад
Not sure what tiff means? Like the file format?
@schalachi
@schalachi Год назад
hey bro sorry for another question what size is the exhaust side 4 bolt? 2.5" or 3"? looking for a downpipe or make one for my r33 gtst
@schalachi
@schalachi Год назад
nvm at 7:50 you say its 3" thanks!
@cmattdabrat
@cmattdabrat Год назад
No worries! You got it! 3".
@PacoRobbins
@PacoRobbins 2 года назад
Me: The Chevy Cruze is trash, and there's no way anyone could make this car cool. Matt: Hold my bowtie.
@cmattdabrat
@cmattdabrat 2 года назад
LOL, I appreciate that.
@goodfood1692
@goodfood1692 2 года назад
Does anyone can give me reference where i can find performance kit for rebuild the engine f18d40 chev cruze? Kind of ring piston gasket and the other?
@cmattdabrat
@cmattdabrat 2 года назад
The stock gaskets are fine. The head gasket is a MLS gasket, and will hold up. I got my rods from here as well as my turbo. bit.ly/3tdVD8Q Use code MATTCHEVY for a discount. Pistons I got from JE Pistons.
@goodfood1692
@goodfood1692 2 года назад
@@cmattdabrat hi thank you for your reference. Since my crankshaft stuck and won't spining even i tried manually to spin it. And advise where i can buy con rod bearing?
@MrJermbob
@MrJermbob Год назад
Bit laggy ?
@cmattdabrat
@cmattdabrat Год назад
Within it's operating range on this little 1.8, the lag is okay. Doesn't really start making boost until 5k RPM and starts to run out of steam around 7500 rpm.
@MrJermbob
@MrJermbob Год назад
@@cmattdabrat I run a GT3076 on my 1.8 motor and its full boost by 4000.
@cmattdabrat
@cmattdabrat Год назад
@@MrJermbob Nice! I had thought about giving my GT30 a try and seeing how I like it. ATM, doing a max effort kind of thing. And when I ordered fittings for the coolant lines, I got the wrong size, so I stuck with the GT35 for the time being. Who knows, the GT30 I have may be a better fit, but I wont know until I try both. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-dyY0ibNudsw.html
@MrJermbob
@MrJermbob Год назад
@@cmattdabrat GT30 should be a direct swap now you have done the GT35 mission. It will give you a much broader power band you will find.
@russellladelfa1150
@russellladelfa1150 Год назад
Those welds tho yikes
@cmattdabrat
@cmattdabrat Год назад
Gotta start somewhere. We can't all be IG welders. Got the job done. Feel free to share your welds lol ;)
@schalachi
@schalachi Год назад
trying to use the coupon 1 year later like 🥲
@cmattdabrat
@cmattdabrat Год назад
Try MATTCHEVY and see if that works.
@schalachi
@schalachi Год назад
Thanks it doesn’t work but my Honey coupon finder got me $22 USD off. Listen where does this ship from? I don’t see a shipping fee and I am ready to buy. How long did it take to reach. I Am in FL
Далее
Тарковский - гений
00:48
Просмотров 655 тыс.
UNBOXING a GT35 Street Turbo by @MaXpeedingRods
16:13
Просмотров 3,3 тыс.
How to fix the WORST sounding V12 Exhaust
27:34
Просмотров 1,5 млн
VW Golf GTI Generations DRAG RACE
25:50
Просмотров 2,2 млн
Stuck a Breast Implant in My Turbo at Full Boost...
11:58
BIG Dyno Fails Engine Explosion Compilation
17:16
Просмотров 1,4 млн
Turbo vs. Supercharger - Which is Best?
10:34
Просмотров 1,7 млн
When you give an 8-liter V10 a big lumpy cam 📈
16:45