No video :(

Installing the FX Power Block and Plenum on the Impact MK2 (FX Impact M3)

Подписаться 9 тыс.

Просмотров 10 тыс.

50% 1

When Chris Turek The Up North Airgunner reached out to me and asked what I thought about embarking on a build that would be EPIC, of course I said I am in! We are going to show you all how to turn an FX Impact MKII into an FX Impact M3.5. Yes I know there is no such thing! YET!!!! But we will show you how we would build it. Follow along with this awesome journey and let us know your thoughts. Lets keep it fun and friendly.
Welcome to Airguns of Michigan, we are excited to bring you content based on Airguns and accessories. Our content is based on the best practices I know and how I achieve what I feel is the best at this time for me. Opinions vary and that is the best part as well can all learn from each other. Let’s have fun and grow together along the way.
You can get Patchworm kits and Balistol at High Pressure Pneumatics
Here are the links to the people we support and we hope you will also.
High Pressure Pneumatics
myhighpressure...
Ergo Air
www.ergoair.net/
Saber Tactical
sabertacticali...
Donny FL
donnyfl.com/
Accutac Bipods
accu-tac.com/
Arken Optics
www.arkenoptic...
RX Target Systems
www.rxtargetsystems.com
Monstrum Tactical
monstrumtactic....
Splatterburst Targets
splatterburstt...
Airgun Detectives
www.airgundetectives.com
www.youtube.co....
As always please be safe and God Bless
Moose
music by audionautix.com
Track: JJD - Adventure [NCS Release]
Music provided by NoCopyrightSounds.
music by audionautix.com

Опубликовано:

28 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 42

@abitoutside 2 года назад

Lmao to the Karen's

@jeffojibway9284 2 года назад

I appreciate a design that can be upgraded to the current model. No reason to junk the MK2! Well done!

@stedyone1090 2 года назад

Interesting

@bikerboywayne1 2 года назад

Hay moose another cracking vid 👌 I do all the above but I do some extras whilst all the gutts are out Yes good lube is our friend The extras I do I polish the hammer inside and out I polish the hammer weight polish the hammer spring I polish the valve rod where the hammer sits. i also polish the valve spring the the base of the springs are very important to polish mine are like mirrors I start with 1000 wet n dry and finish off with autosol metal polish all this work gives more consistency tighter extreme spread recommend by Mr Rowe himself Keep the content coming my friend Wayne from South Wales 👊

@abitoutside 2 года назад

Already did most of that pre build :)

@DanielGarcia-zw8nx 2 года назад

Awesome 👍

@kamando73 2 года назад

Looks to me, you beard won't get tangled up in yer cocking lever anymore ? I like the new look ! AND I certainly enjoy your content, keep it coming and thank you for all you do !

@abitoutside 2 года назад

It's gonna grow back 😀 but thank you and I'll keep it coming

@davydave77 2 года назад

Very nice the new look and great video as always. A subscriber from Ivory Coast 🇨🇮 west Africa

@abitoutside 2 года назад

Thanks brother

@GreenTreeAirgunner 2 года назад

Just wondering, Ernest Roe shows the length the valve rod extends is 6.0 to 6.5mm from the housing hole at the front of the loading block. When changing to the power block and upgrading the MKII, s this length still important?

@abitoutside 2 года назад

My understanding at this point is that it does not matter with the power block setup anylonger

@Rule62life 3 месяца назад

Need help here, (1) Thanks for the vid and your help. (2) I have a MK ll. (3) I ordered and just received the newer version of the upgraded power plenum kit for MK ll. (this one is supposedly the newest version that upgrades this unit to the newest MK lll level. (4) install was going fine until I got to installing the plenum cap, ( you speak here about using the tensioning screw to "spread open" the receiver in order to make way for the new plenum cap, ( Kevin Stody?). Mine is extremely tight! With tons of lube and force that was flat out uncomfortable, I could only get it in about 80%. I gave up for fear of snapping the receiver open. WHAT THE F? Is there a difference in MK ll to Mk lll receivers in that opening? The vids I see from Utah AG, and Ernst Rowe DO NOT show anything like the struggle I'm having. (5) are there 2 different plenum cap diameters available? H E L P. !

@abitoutside 3 месяца назад

I would be very careful and also if it goes in hard it will damage the orings. I would contact Utah Airguns and check to make sure you have the right parts for your gun.

@darkseas3846 Год назад

Hi just a question I managed to fit the power kit my self but the have a leak from the rear gauge , I noticed on my old one there is a little plastic washer in the hole but nothing for the new block should there be one where the gauge goes do you know ?

@abitoutside Год назад

100% yes

@surreallife777 2 месяца назад

I wanted to purchase the FX impact Mark 3 but I'm in Canada with tax it's going to be over $3,000. If I find a Mark II and install the power plenum what advantage would the Mark 3 have and is it much of a difference?

@abitoutside 2 месяца назад

In all honesty most of us would rather shoot the MKII with the upgrade

@surreallife777 2 месяца назад

Really? Why is that? What upgrades do you have to do and how much would they cost? It doesn't have to be 100% exactly like the Mark 3 just a few important upgrades.

@abitoutside 2 месяца назад

Mostly the power plenum

@markzimmerman7279 2 года назад

Ginger Lee wasn't she the red head on Gilligan's island Ginger Lee Grant, haha

@abitoutside 2 года назад

Lol

@thesnipersnestandmore7461 Год назад

My kit came with 4 nbr 90 orings and 2 other orings of different sizes with the 3balls, fall those o rings go in the rear block? Also I have the slug power kit, is there no need for the ball in the valve adjuster? I also ordered the mk3 cocking lever kit but haven’t gotten it yet, waiting to do everything together.

@abitoutside Год назад

No need for the ball

@Neshra54 Год назад

Great video brother ! I just did this upgrade on my MkII but now the valve rod end is not seating completely flushed with my valve housing. Doesn't give me any problems, but it's just not flushed ! Is that normal ? TIA

@abitoutside Год назад

It appears to be, mine have all been that way.

@Neshra54 Год назад

@@abitoutside Thank you !

@robbypro3370 2 года назад

That was funny, "man dude you don't know what your doing dude" haters.

@gabrielortiz6529 Год назад

what is the measurement for c1 or valve seat adjustment I have .30 caliber no to much information some people say 5.5 mm some say 6 mm I want to make sure thanks

@abitoutside Год назад

No need anymore

@devooutdoors5661 Год назад

Can this go on a impact x?

@abitoutside Год назад

100%

@nidgejefferson9665 Год назад

Just wanted to now if you have changed your regulator

@abitoutside Год назад

Yes to Huma

@nidgejefferson9665 Год назад

Yes I put a huma-air in but when I put the bottle back on the gun the regulator jumped up to 155bar with the regulator not open

@abitoutside Год назад

Huma makes different BAR regulators some are high pressure like the one you installed, other are lower pressure. You have to specify when ordering or picking one up.

@nidgejefferson9665 Год назад

@@abitoutside hi sorry to bother you again but I am wondering if I should get the regulator at 100 bar to 165 bar as I think I might have ordered the wrong one at 155bar to 109 to 200 once again thanks and hope you can help me

@abitoutside Год назад

Yep and also if I am not mistaken I think you can just restack the washers to tone it down. I think there is a file for that on Humas website

@rockyourfaceoff2 2 года назад

Did you ever get your M3 power block situation squared away?

@abitoutside 2 года назад

Yep a while ago, working like a charm

@rockyourfaceoff2 2 года назад

@@abitoutside you mean the one that has the 3 slots? Or the actual power block with the o'rings inside the block and plenum rather than on the outside of the valve body?

@abitoutside 2 года назад

Yep, the one with the slots was wrong, I replaced it with the stock one.