Installing the Irwin Record Woodworking Vice 7" - 175mm

Подписаться 56 тыс.

Просмотров 62 тыс.

50% 1

Wood you Do It
Another upgrade that I wanted to do in my workbench, was to install a woodworking vice. This model is a practical and easy-to-install vice system for almost any workbench. The vise is simply attached to the table with a few screws, and with the right clamping jaws and a little work, the vice can quickly become a nice clamping tool for your shop.
Please remember to SUBSCRIBE and hit the BELL for all my latest videos to my channel at / woodyoudoit
If you would consider supporting my channel I would be very grateful, please feel free to donate to my PayPal
🌎 PayPal account.
www.paypal.me/djpedrog
You can also buy me a coffee here 😃
www.buymeacoffee.com/woodyoudoit
🌎 Follow me on Instagram:
/ wood_you_do_it
🌎 My Website
pedrogameirodiy.blogspot.com/

Хобби

Опубликовано:

12 окт 2020

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 80

@normagain Год назад

Why have you left a gap between the static jaw and the bench top? would it not have been better to recess the jaw so the vice is flush both ways. Not a criticism just curious. You have a very nicely laid out and well stocked workshop. Greetings from the UK

@designlovedesign5140 3 года назад

Your videos are so satisfying to watch. Love your shop. Great clean work.

@WoodYouDoIt 3 года назад

Thank you so much for your comment 🙏 please consider subscribe the channel 😉

@TheBeardedSandman 3 года назад

I like that you put the bench together with bolts instead of screws and glue. That way, if you need to take it apart for some reason, it's easily done.

@WoodYouDoIt 3 года назад

Hi Will, yes you're right. Have you seen the workbench video?

@vivacomsaude 3 года назад

Excelente vídeo!

@WoodYouDoIt 3 года назад

Obrigado Julio.

@zulegnuzzu 7 месяцев назад

Numero uno complimenti per tutto 👍👍👏👏👏👏

@escanifobeticomendes2517 3 года назад

Excelente Pedro.

@WoodYouDoIt 3 года назад

Obrigado 👍

@monkeypuzzler Год назад

Very clean install. Great work

@WoodYouDoIt Год назад

Thank you 👍

@BDL090754 2 года назад

Thanks for this, very helpful

@WoodYouDoIt 2 года назад

Thank you 👍

@OutdoorLiving4u 3 года назад

Another great video pedro...👊

@WoodYouDoIt 3 года назад

Thanks Mark 👍

@fleetswoodshop3339 3 года назад

PEDRO GREAT VIDEO AWESOM CLAMP INSTALL .VERY NICE FROM DOUG

@WoodYouDoIt 3 года назад

Thanks 👍

@witoldwielki201 3 года назад

Good job.

@WoodYouDoIt 3 года назад

Thanks 👍 please subscribe the channel 😉

@casper1240 2 года назад

I've got the Record quick release model .so much easier than unscrewing the vice for big stock like your shop similiar to mine

@WoodYouDoIt 2 года назад

Thank you Ronnie 👍

@gordsmith1430 3 года назад

Ótimo vídeo, amo o banco

@WoodYouDoIt 3 года назад

Thanks Gord, please subscribe the channel 😉

@user-ih1zw3ly6p 3 года назад

Чудово!

@robm6335 3 года назад

Perfection ...

@WoodYouDoIt 3 года назад

Thanks Rob. Please subscribe the channel 😉

@robm6335 3 года назад

I’m there buddy 👍🏻

@WoodYouDoIt 3 года назад

@@robm6335 Thanks

@SeaShanty2016 2 года назад

I really like the quality of your work, but question the method of using the mitre saw to clean out the cutout you made. Although it looks neat, you are increasing your risk of injury to a great extent - Although Chisels take a bit longer to clean out it’s far safer. A wise man once told me “ Use high speed spinning blades only when that’s your only practical option”

@WoodYouDoIt 2 года назад

Hi Duncan, thanks for your comment. I am aware of this danger, you are absolutely right. Thank you for the warning.

@SeaShanty2016 2 года назад

@@WoodYouDoIt 👍keep up the good work

@salvatoresalvio204 Год назад

BUON VIDEO. COMPLIMENTI. SALUTI SALVIO

@WoodYouDoIt Год назад

Thank you 👍

@d.beaumont9157 3 года назад

Another excellent video, just wondering did you put anything on the valcomat bench top to stop it from getting stained.

@WoodYouDoIt 3 года назад

Hi David, thanks for your comment 👍 i didn't put any protection so far. From time to time i just give it a light sanding.

@Swarm509 Год назад

I may of missed it elsewhere but what material did you use for the jaws? Straightforward and to the point video, which I like!

@WoodYouDoIt Год назад

Hi, it's two small pieces of black Valchromat

@ErikRave 2 года назад

Where you in the army? Cause you operate the impact driver like a machine gun 😅. PS, nice workbench! I have used your plans to make my own 😊

@WoodYouDoIt 2 года назад

😂😂 I didn't join the army, so maybe it's because of that 😂😂 glad to know that you've used my plans Erik 👍😉

@TeaLoveandCare 2 года назад

Pedro, I'm in the process of making a bench very similar to yours. I notice you have no overhang around the perimeter of your bench. I'm considering making the frame narrower and having about 10cm over hang for clamping purposes. What's your experience been with no overhang? Any problems? Thanks for the instructional videos. New subscriber here

@WoodYouDoIt 2 года назад

Hi Shane. No problems at all. I don't see the need for overhang. You just need longer clamps. Any clamp with 15cm is capable of that.

@andrewford80 3 года назад

Is the back plate of the vice not supposed to be recessed such that there is no gap between the vice and the table?

@WoodYouDoIt 3 года назад

I don't´t see any problem so far in doing this way.

@bellarinefishing4542 3 года назад

Not bad

@tonwanten6417 3 года назад

Hi, thank you so much for this video, very, very helpful ! Just one question: What screws do you use to attach the vice to the bench? Thank you !!! Kind Regards, T.

@WoodYouDoIt 3 года назад

Thank Tom. I used 4 Lag screws DIN 571 zinc plated hex head 6x40mm and 4 washers

@tonwanten6417 3 года назад

@@WoodYouDoIt Muchas Gracias!

@swallace18 2 года назад

@@WoodYouDoIt what diameter were the screws?

@WoodYouDoIt 2 года назад

@@swallace18 i used 4 Lag screws DIN 571 zinc plated 6x40mm and 4 washers.

@fabiocabria 2 года назад

Boa tarde. Parabéns pelos excelentes vídeos e trabalhos. Que material é esse do tampo da bancada?

@WoodYouDoIt 2 года назад

Ola Fábio, obrigado. O tampo é Valchromat.

@muhammadshurafa602 2 года назад

one question I have the same vice and am about to install it, What is the material you attached to the Jaws and how can I get it.

@WoodYouDoIt 2 года назад

Hi. It's Valchromat.

@dden771 3 года назад

great job! what material are the vise jaws made of?

@WoodYouDoIt 3 года назад

Hi Den, thanks for your comment👍 Please subscribe the channel 😉 its black Valchromat. See www.investwood.pt/en for more info

@dden771 3 года назад

@@WoodYouDoIt thanks

@kevinronald4137 2 года назад

Excellent video, two questions, do you have plans available? And why did you not pare away in your frame the rear plate shape so the vice would fit fully against your bench edge?

@WoodYouDoIt 2 года назад

I don´t have any plans for this.

@FilipeMVicente 3 года назад

Pedro, porque não faceares o torno para aproveitar toda a superfície da bancada em aperto?

@WoodYouDoIt 3 года назад

Ola Filipe, como assim? Ele ja está faceado pelas mandíbulas?

@FilipeMVicente 3 года назад

@@WoodYouDoIt basicamente, a primeira mandíbula fica embutida na bancada e a segunda mandíbula acaba por prensar toda a bancada e não apenas a mandíbula (por exemplo para peças mais largas).

@WoodYouDoIt 3 года назад

@@FilipeMVicente Ahhh ok, já percebi. Pensei que era faceado com o tampo da bancada. Pois é uma ideia que não me ocorreu. Mas não sei até que ponto traria vantagem uma vez que a força de aperto é sempre exercida apenas na zona da mandíbula.

@FilipeMVicente 3 года назад

@@WoodYouDoIt tenho assim na minha bancada de marcenaria. Em peças mais compridas para aplainar ou lixar a estabilidade longitudinal é bem maior, não abana. Mas o resto da montagem foi perfeito, trabalhas mesmo limpinho, impecável 👌🏼

@WoodYouDoIt 3 года назад

@@FilipeMVicente Tou a ver. Parece boa ideia visto assim 🙂 Obrigado 👍

@justinshields4216 3 года назад

What was used for the table top?

@WoodYouDoIt 3 года назад

Hi Justin, thanks for your comment 👍please subscribe to the channel 😉 the table top is Valchromat.

@andyelliott8113 3 года назад

Is that a Makita LS1019? How do you like it?

@WoodYouDoIt 3 года назад

Hi Andy, thanks for your comment 👍 Please subscribe the channel 😉. Yes it is, and it's absolutely fantastic. Super accurate and has a small foot print on depth.

@andyelliott8113 3 года назад

@@WoodYouDoIt I've already subscribed. Looking at that mitre saw myself which is why I asked. Have you seen this? ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-oi295VKBYiE.html&ab_channel=SteneWoodwork and www.stenewoodwork.com/store1/The-STENETENT-Plate-*IN-STOCK-p132099441? Just a heads-up for when / if you suffer the same issue.

@WoodYouDoIt 3 года назад

@@andyelliott8113 yes I've seen that. I don't have that problem so far. Most of the time i do 90 degrees cuts. And if you move the saw carefully, I think this will not be a problem at all.