Тёмный

Intank Fuel Pump Upgrade & Fuel Pressure Regulator - VL RB30 Turbo - Walbro 255 

Pangaz' Shed
Подписаться 1,1 тыс.
Просмотров 1,1 тыс.
50% 1

This is my VL running a very conservative "OEM plus" style turbo kit. VL's run 2 fuel pumps, an internal lift pump and an external high pressure pump. I'm upgrading this convoluted 2 pump system and replacing the internal with a Walbro 255 high pressure fuel pump and deleting the external. This should quieten down the noise and provide more than standard fuel flow. Of course an adjustable fuel pressure regulator is on the cards also!
Lastly I will be hacking the inside dash to throw a dirty boost gauge in a shitty location to keep an eye on boost levels ;)
#rb #turbo #vl #rb30 #walbro #nissan #holden #turbosmart
Disclaimer:
I will do my best to perform any tasks safely and legally. I do not claim to be a professional but I do my research before undertaking these tasks. Replicating anything shown in my videos are solely at your own risk.
Any opinions expressed are mine only.
This video is NOT sponsored by any of the products shown in this video.
Any links provided are affiliate links, they do not cost you anything however I make a small percentage of the sale if you use my link, thankyou for supporting the channel!

Авто/Мото

Опубликовано:

 

17 окт 2023

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 8   
@kl11productions34
@kl11productions34 4 месяца назад
Great! Thanks. I’m doing this upgrade on my Vl this weekend.
@PangazShed
@PangazShed 4 месяца назад
Awesome! In case you want to do the wiring upgrade, I’ll be uploading a new video of me installing a Walbro 525 in my XR6 with heavy duty wiring. If I decide to upgrade the wiring on the VL (I’ll inspect for any melted or brittle wiring since the upgrade) I’ll do the same as what the video will show as it’s pretty straight forward. Thanks for watching!
@kl11productions34
@kl11productions34 4 месяца назад
Have you run into any problems with replacing the two standard fuel pumps with the one Walbro 255? Does the wiring and relay need to be upgraded?
@PangazShed
@PangazShed 4 месяца назад
No problems as the original has a lift pump in tank and a high pressure outside of tank. The 255 is higher in spec that it can handle the lifting and sending to the rail no worries. I didn’t upgrade the wiring as the 255 isn’t a power hungry pump. I would if I went for 460/525 which I recently done to my XR6. But the wiring upgrade was simple really.
@dionpapoulis1797
@dionpapoulis1797 Месяц назад
Hi mate what turbo smart fuel reg did you use and has it been working ok for you?
@PangazShed
@PangazShed Месяц назад
Hi there, I used the TS-0404-1015. And it’s been working good. Cheers
@Yosti86
@Yosti86 3 месяца назад
Did you happen to send the Return to the Centre Crimped return on sender?
@PangazShed
@PangazShed 3 месяца назад
I used the original location as the submersible hose in tank was still in one piece
Далее
How do I choose the right Fuel Pressure Regulator?
6:44
When You Get Ran Over By A Car...
00:15
Просмотров 4,4 млн
A Quick Guide to RB30
17:55
Просмотров 32 тыс.
VL Nationals 2023
8:55
Просмотров 3,5 тыс.
70+psi BOOST VL turbo Holden RB30 | fullBOOST
9:07
Просмотров 78 тыс.
Когда купил машину 300+ л/с 🤔😂
0:59
Как Разводят Владельца Mercedes
1:00