Interfacing Parts on Factory Ebikes, Example Hacks to a RadRunner

Подписаться 30 тыс.

Просмотров 112 тыс.

50% 1

Part 2 - Adding torque sensing bottom bracket • RadRunner hack Part2, ...
Part 3 - Adding regen braking • Rad Factory Ebike Hack...
This video shows the process of swapping out the controller in a turn-key ebike for an aftermarket motor controller. It's not a fun process, it's definitely not "plug and play", and in can in fact be a real pain-in-the-ass job. However, there are cases where in spite of that it still makes sense:
1) The bike is broken and no warranty support is available for replacement parts from the supplier, or
2) You have a legit understanding of DIY ebike stuff and need to modify the platform to have different performances and behaviors than the stock bike.
Here at Grin we're really solely focused on conversion kit retrofits and don't deal with factory ebikes at all. We have very little interest in attempting to interface to them. Never-the-less we get asked about this kind of work ALL THE TIME from people who have an ebike that doesn't live up to their expectations.
So we figured it was worth at least making an educational video to show what that process entails, and really more than anything to discourage people from getting in over their heads.
If you want to do this kind of stuff, you are on your own, no one will hold your hand through the process and you have to be prepared for nothing to work out.

Опубликовано:

5 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 200

@aaronkent76 2 года назад

Thank you for all this in depth content, the internet is starved for this quality. Your support the Ebike community is unparalleled. Thank you

@andrewbottrell1048 2 года назад

I’ll give a thumbs up for any video that starts off with “you have to take responsibility for your own actions.” Refreshing.

@joannaritoni9213 2 года назад

This is been the most informative electric bike service and information that I've come across on RU-vid video thus far. so I wanted to say good job and thank you! I hope you're getting some money for this because unlike many other videos I've watched from many other people you actually deserve compensation for this good work that you're doing thank you again. keep it up

@GrinTechnologies 2 года назад

Thanks Joanna! We don't do any monetisation of RU-vid videos, our channel goal is just to share accurate information about ebike technology for those with the patience to seek it out.

@dickflinghammer2985 Год назад

Great info. I have a Sondors MadMod and besides switching out the suspension I wanted to add a 52v 30 ah battery and a Sparks battery blender to go along with the stock 48v 21ah battery. I was wondering if I could also run one of the Grin controllers with the battery blender. If you ever see this lol thanks

@dickflinghammer2985 Год назад

I'm no longer an ebike electro-tard! 😀

@charlesyates6687 Год назад

Realy nice to find someone who does know something about e bikes . Most vids are people who are clueless experts.

@brannonmcevers1854 Год назад

I'm a EE and love all the technical and background info. Keep up the great work! You're a great asset to to PEV community.

@goingoutotheparty1 2 года назад

These Videos are so useful and informative, I built my own from budget fat bike and regularly comumute year round but have continuous trouble with sprockets and headsets I may consider getting a broke down Factory bike and do this cos they're well screwed together. Gotta paint it tho

@grantadamson3478 2 года назад

These videos are a huge help. You present well.

@DivineMisterAdVentures 2 года назад

"Beauteous!" (about a solder joint.) The true inventor at work. No doubt already an altruist, long before retirement and a foundation in his name.

@gguillo2 2 года назад

I appreciated you fishing the cable through the frame.

@rickc2222 2 года назад

Thanks for this. I went the other direction on my current project/repair job: faulty issue with a grin kit - ended up removing the grin controller and CA and put in a cheap KT controller and display - fixed the pulsing problem and got more top speed from the bafang 750w fat geared motor. I think the 20a grinfineon controller just did not want to play nice with this motor or it was damaged....either way the new parts helped me rule out the motor as the problem and got the bike back on the road. Grin parts customer service was very helpful but after much back and forth and stalled progress, in this case cheap parts from aliexpress was just a simpler path to troubleshoot by elimination.

@Jake-vz5jp 26 дней назад

Which controller did you end up using?

@rickc2222 26 дней назад

@@Jake-vz5jp I believe it was the KT 22 amp model...but kind of kicking myself and think i should have gone for the 25a...might have squeezed a bit more power out of it...

@chuyskywlk 2 года назад

I revised a radrunner+ like this and, yeah, it's a great platform to build of off. I mounted a PhaseRunner in that same spot (back when they were available ;D), went to 52v, and swapped out to a much larger DD motor for that silent running cool. Never did get my speedo to work, so I'll have to try that trick with the spinning and, maybe, it's time to add an external speed sensor.

@francescocaravella4556 2 года назад

If you have the CA version with the external speedo, you might need to internally rewire it to pick up the rpm from the motor hall sensor

@a-aron2276 2 года назад

Take note of what he said about the motor magnet pairs, you'll need to know that number to tell your bike computer how many pulses is in one revolution, pair that with the outer circumference of your wheel and you'll have your speedometer.

@londongrace5784 2 года назад

What motor did you use that fit the rear dropouts? They are 160-165, not 175mm.

@chuyskywlk 2 года назад

Pulled apart my motor wire harness, spliced the speed sense wire to a (in my case blue) hall wire, bob's your uncle I've got a speedo again. Huzzah!

@williamdecker3989 2 года назад

Amazing! I'll do this to mine when the warranty goes up! Subscribed!

@leftcoastbeard 2 года назад

Thanks for putting together a video on this!

@davidmorinmusic 2 года назад

awesome. i wish i had this video years ago when i got started, but your staff is great at answering questions. cheers!

@tonymunn 7 месяцев назад

Excellent information. I'm building a high powered recumbent electric scooter with a 72V-63Ah battery pack. The info you provided makes me feel a little more comfortable.

@ethanchow9170 Год назад

just bought baserunner to replace the factory non programmable bafang controller on my conversion for a bit more efficiency and speed. looking forward to installing it!

@BenJandrell Год назад

Great insight to a complicated subject... i think all their motors and controllers should ship with this guy in the box to problem solve 😄

@protopottygames2648 2 года назад

I've found forceps to be really great for fishing wires through frames. Pretty surprisingly handy tool for a number of other ebike related repairs as well. Say like if you need to cinch up a zip tie that's in a tight spot or too close to your brake rotor to avoid touching the disc with your hands.

@GrinTechnologies 2 года назад

That's a great tip! Certainly better than a bent coat hanger if you have one around.

@protopottygames2648 2 года назад

@@GrinTechnologies haha..yeah I would imagine so. Tbh tho it's getting pretty tough to find a good wire hanger around these days when you need one. (Ahem..."no more wire hangers.")

@Bonjour-World Год назад

I use paracord. If one strips the core fibers out of it then one can fit the braided portion over the cable connectors and use it like a "Chinese Finger Trap" to hold the connectors and form a smooth transition. Note that it can also be used as a cable shroud if one has a bundle of several cables.

@AllDogsAreGoodDogs Год назад

Forceps work great at holding leftover, short 420 joints, too.

@davemeise2192 2 года назад

This has been an excellent video. Thank you.

@methods-SE 2 года назад

Hell Yea Brother - Justin has been 100% since I met him.

@gaizkitapowers Год назад

Awesome. I'd give you a 11 out of 10. The best video ever I've seen about ebikes. Thank you very very much!

@markj6984 Год назад

i bought a bike and my dealer wasnt very helpful i always get my info off the radrover guys becasue its basically the same components. Im trying to upgrade just to get from 32 to at least 40km an hour. This has been very helpful.

@devtank 2 года назад

You're basically talking about me here. 2018 Rad Mini, is now a GrinRad Mini. Apart from the Frame, Fenders Stem & Shocks, the only thing left is the actual motor und veelz. I'm learning Industrial design and plan on making my own frames for bikes, trikes, work vehicles and larger. Grin is basically the (Weitzlar not Solms) Leica-Lego of the DIY vehicle world, or are the grandfathers of electric fuckery.

@dcryder9736 2 года назад

This gives me the confidence to replace my current controller to maximize my 1500w Ebikeling motor and get some Regen braking.

@user619tlsdca5 2 года назад

Saw you at some contest for ya new design alternater like motor. Believe you won a grant if ya patent. You awesome tech and learned a lot from ya videos, especially the issues of DIY Dual AWD. Kept me from making average mistakes. It took me to build e bike with Turbo Booster over a Dual Set up meaning I have no extra CLUTTER of add on parts while building for performance and energy efficiency. Applied a lot of ya knowledge. God bless and good luck on ya projects to be marketed thru this field.

@peppesimone4897 Год назад

There is a lot of information to process here, thank-you for the weeks of homework. You my friend are exceptional %^)

@SamuelVella1995 Год назад

This is awesome! I love the software you've developed for the controllers. Opens up so many options to hotrod an old or existing ebike setup. I wonder what the physical limitation on a 1500W voilamart hub motor is...

@GrinTechnologies Год назад

Well you can easily open up your motor and measure the width of the stator or magnet. If it's 27mm you can use the 9C27XX models in our simulator to understand the thermal performance limits, both with and without statorade coolant. If it's a 35mm stator you can use the Cystyatye 'H' motor series as your reference, and if it's a 45mm stator you can use the MXUS models. The voilamart branded hubs are just another generic 205mm diameter DD motor series.

@davidlittlefield2483 Год назад

This is an excellent video Justin. Thank you!

@johnjames5712 Год назад

I really like that chest-impaling device that's also serving as a camera mount on the bike. like. That looks like that could be really bad in a crash.

@charlesyates6687 Год назад

Routing cables use shop vacume and suck a peice of string threw the frame then use string to pull wire or as i use peracord then pull the wire or cable you need routed .

@Mikesukes 2 года назад

Best video ever! 😀 That sure looks like a uncomfortable bike with that big box between your legs. Is there a way to set the base-phase-franken runners to power levels with a up down switch on the handle bars?

@chickeee 2 года назад

The storage box is an option and most people don't pedal this bike so it's OK. And delivery boxes go on the back rack

@chickeee 2 года назад

The CA3 can save totally different settings for batteries, power, speed, PAS or regen

@GrinTechnologies 2 года назад

Yes actually we didn't go into it in this video but you'll see it in the next one when we add the torque sensor and setup the handlebar MFSwitch to have several different assist levels. It can just as easily be set for power limits if you are running a throttle only system without PAS.

@chickeee 2 года назад

It's a good idea to tie a string or old wire to the cables before you pull them out of the frame.

@Bonjour-World Год назад

You have way too much fun with these upgrades :-)

@KING_OF_FARTS Год назад

Super Ebike knowledge.

@2Chickaboom2 5 дней назад

You have described my current e-bike issue completely (Ride1Up brand Core5). Watching this vid now with great interest.

@Funermen 2 года назад

just want to point out that this isn't exactly stock as that front fork has been switched out which means added weight. I have done lots of my modifications to my radrunner built entire 12v system on it with motorcycle headlight, turn signals and horn. I have also switched out my front fork to dual crown suspension forks. my planned upgrades is 50amp controller and a 1000w geared motor bafang g062 I will most likely have the highest torque radrunner and have 2 grin v4 torque arms coming today.

@isaaco8056 11 месяцев назад

Thank you I've been looking for this video

@EBikeBuilder_ 3 месяца назад

Seems like the Phaserunner Suite could be updated to include a feature that would help you count the hall toggles? Put the valve on the bottom, it'd ask you to spin the wheel exactly once, then the software could count the hall toggles on screen?

@GrinTechnologies 3 месяца назад

It's a good idea, but unfortunately there is a 3Hz communication limit between the software and the controller so many of the hall sensor states would get missed if it is turned at a normal speed in a false value. There may be a way of rapidly reading just the hall states and not the rest of the data with a "count halls" pop-up window that changes the communication calls to be a lot faster, so we'll look into that!

@perrymickle424 2 года назад

grin makes the cream of ebike parts, the best in the world for sure. Sadly though, I cant afford to buy any and have to keep struggling with cheapo, generic chinese crap that breaks after a use or two....

@GrinTechnologies 2 года назад

We were doing *that too once upon a time with our first projects at university back in the day! At least you learn useful repair skills and then truly appreciate the good stuff once you have it.

@mrtechie6810 Год назад

I feel your pain.

@marcstlaurent3719 Год назад

Thanks for the info but nothing like blowing through stop signs on a silent missile . A pedestrian was just killed this week on a walking cycling path in front of my house by an eight year old on a e-scooter.

@GrinTechnologies Год назад

FWIW we had a spotter at the intersection to check that it was clear. Unfortunately there weren't any straight stretches nearby long enough to accelerate to full speed at the location we were filming.

@addictedtowarthunder4610 3 месяца назад

Can you guys do more videos like this?

@chrisvillalobos2053 2 года назад

My Phoenix Curser Controller broke and I could not reach the new owners of the brand. If I didn't find the Grin controllers I don't know if I would have been able to make the old motor run again.

@JonPrevost Год назад

Is there no way to implement a hall counter "mode" within the software? All the information seems to be already there. A simple prompt for the user to rotate the wheel exactly once (in the correct direction). Press done and the software has the count. Do it multiple times in-case there was backlash or sloppy user rotation.

@GrinTechnologies Год назад

Yes we've considered this! The main issue is that the maximum polling rate from the ASI controller is about 3 Hz, so with geared motors you can get many hall transitions taking place when people turn a motor by hand that the software doesn't "see" and would result in an erronous number. But with proper notice to the user this would still be better than nothing and having them count out in their head :-) We'll revisit this in future release updates, perhaps as an extra optional 1st step in the motor 'autotune' routine.

@juandelacruz2989 2 года назад

Thank you very much for this informative video. Can you also provide all ordering link of all the connectors, controllers and display of your upgrade you've done on RadRunner? As an example; A. Connectors: 1. Stock battery connector (3-pin) to L1019 connector. 2. Stock throttle connector to CA3-WP display. 3. Stock brake lever connector (Higo 2pin) to CA3-WP display. 4. Stock front head light connector (Higo 2pin-red color) to CA3-WP display. 5. Rear brake light connector (blue color) to CA3-WP display. B. Sensor 1. New pedal assist sensor (PAS) that match Frankenrunner controller connector. 2. If stock PAS can be used, please provide link to the connector. C. Controller - please provide the link. D. Display - please provide the link. Thank you again in advance. :)

@josenava3656 Год назад

Very useful information

@hiker5500 2 года назад

Lots of useful info... 👍🏼

@JamiePineappleWyatt 2 года назад

Frankenrunner? Damn I'm out of date. Did you say that was "The most powerful FOC controller you stock"? Nice small package, looks like it was made to fit that bracket.

@quantumfx2677 2 года назад

I tried to open your link to your website and it says RU-vid can not open this link, might want to look at it, Also anything new coming in new advancements in the electric motors? I see a lot of exciting news in battery technology the future looks very good for ebikes.

@chickeee 2 года назад

The GMAC motor is very advanced. Lightweight hub motor, powerful with regen braking

@kjm-ch7jc 2 года назад

Bad idea having that camera mount in front of your chest.

@Ucceah 8 месяцев назад

as a road bike rider, using a radwagon 4 for commuting, grocery runs, and taking folks on a ride, that seating position causes me mental anguish! and it looks pretty uncool. :D pull up that darn saddle .. you're nor riding a BMX or trail bike.

@GrinTechnologies 8 месяцев назад

Agreed, but no matter how you slice it the radrunner is not really a bike that was designed for confortable or efficient pedaling, regardless of the saddle height.

@danon-theautisticmaker8112 2 года назад

😍 excellent work bro 😉👍

@Dagzjp 2 года назад

This is awesome - we appreciate the detail (and the in-frame fishing!). I have the US Radrunner 1 (2021). I think the 750w motor has more power than the Canada version? Anyway, I was wondering if I would be able to get up to 28mph (45 kph) with the Frankenrunner controller in this video? I have a 35amp controller but the motor and battery are stock.

@GrinTechnologies 2 года назад

We're not Privy to Rad's sourcing details but I'd suspect that both the US and CAD versions of the radrunner have the same motor, but just that the Canadian model has a lower current limit on the motor controller to keep it at 500W. You absolutely need field weakening to achieve the higher top speed if you are keeping the stock motor and battery. A higher current motor controller in and of itself will only increase the torque and power off the line and at lower speeds, but won't change the top end.

@patlsmith404 8 месяцев назад

AUsome thanks for the great info.💫💥🚴

@Dmit747 7 месяцев назад

I didn’t get part with setting the circumference in CA. Formula is 2 x pi x R which gives ~140” (3600 mm)🤔

@GrinTechnologies 7 месяцев назад

R is different from D. I've never heard of bicycle wheels or vehicle wheels of any kind defined by their radius

@Dmit747 7 месяцев назад

@@GrinTechnologies yes. I got it. Everything went sooo smooth with your video. So happy with my new bike phaserunner brains👍 my riding habbits even changed which ended up in extending the range of my battery. Thank you

@lensseteam Год назад

Thanks for nice video. where can i find that controller? Whats it called?

@GrinTechnologies Год назад

ebikes.ca/product-info/grin-products/frankenrunner.html has been replaced with ebikes.ca/product-info/grin-products/phaserunner.html

@ernestniclas3727 Год назад

Where can I find rad runner plus male battery connector help

@kellybrodigan1121 2 года назад

I gutted a rebranded polaris/pim have a bunch of your parts, kinda got stuck

@olyo167 Год назад

what kind of motor is in rattan 500w hub motoors and where do i get planetar gears for said ebike

@brianmann01 11 месяцев назад

Place a small steel washer onto the end of the wire and fish it out with a magnet.

@mikeg6633 Год назад

Hi, I'm guessing it wasn't possible to pull the new wires through by attaching them to the old wires before removing them?

@GrinTechnologies Год назад

With foresight that would have been possible, yes.

@jamescullen1756 Год назад

What are those forks on the rad

@Jahmall841 Год назад

Does the G60 bafang have a temperature sensor inside the motor? If not,can the user add a sensor for the cycle analysis to read?

@GrinTechnologies Год назад

They do not out of the factory no, but you CAN add a thermistor in parallel the the wheel speed sensor signal and have the demux circuitry of our baserunner controllers separate out the speed and temperature data and recreate them for the Cycle Analyst. The process of doing that was a tentatively planned part 4 of this video series.

@gliderman1176 2 года назад

I think it really makes your legs hurt pedaling while sitting on the passenger seat I think it really needs some motorcycle foot pegs

@victorvannatter312 Год назад

Does pas still work the the frankenrunner? You never showed that. On throttle , it was quite impressive

@GrinTechnologies Год назад

Yes for sure, the pas now hooks up to the CA3

@michaelbailey5272 Год назад

You are great, I love your videos. I have a etrike I built, and when I twist the throttle a bit to fast I get a chattering noice I think comming from the motor as the handle bar shakes as well (front wheel drive) this is a kit, all I know is that it is 48 volts 1500 watt motor that I bought off Amazon. The battery was advertised as high capasity 20 ah 48 volt. Do you have any ideas that I can check to see what that chattering is coming from and how to fix it? It seems to do this upon throttle up and it does not take very much twist to set it off, then I can go again under throttle gingerly.

@GrinTechnologies Год назад

As always, you should get support from the vendor who sold you the product. This may be just the nature of the motor controller and motor combo that they used. Or it could be a sign of some less than optimal tuning parameters. But in any case the person who was in the business of selling you the kit is the one who bears responsibility for supporting it, and if they don't have a clue about what they sold then you should take future business elsewhere.

@michaelbailey5272 Год назад

@@GrinTechnologies Thank you. I have in my cart 2 V7 torque arrestors so I hope that stops breaking off dropouts. I will have to cut the wires past the wheel and install water proof connectors. Thanks again.

@scottd4426 5 месяцев назад

lol. Are stop signs are optional in Vancouver ?

@GrinTechnologies 5 месяцев назад

These are the not so busy backstreets behind our shop, not to worry!

@osimmac 2 года назад

Yoooo have you heard of electric unicycles? i saw your video on the pedal assist unicycle, very cool stuff. EUC's seem up your ally!

@GrinTechnologies 2 года назад

Yup. We actually built an euc back in 2009 or so (ie self balancing one wheeled platform that you stand on and can't pedal). It's been cool to see them take off the way that they have as legitimate transportation with such a following and time permitting we'd love to offer kits for DIY builders.

@quinnfoster4671 2 года назад

@@GrinTechnologies definitely reach out to Mohammed at fungineers. There is a Chinese group as well they might want partnership.

@PolskiDangles 2 года назад

Did you have any startup issues from standstill or uphill? I had many emails with support after buying L10 baserunner, adapter motor cable, cycle analyst from Grin. I cannot take off while on the seat and facing uphill. Bike needs a rolling start. Issue with both original Rad motor and Bafang G62 (1000watt) I laced in later. Finally your team said it was a throttle commutation issue and it was left at that. I now just stay in 1st gear and use PAS then throttle to get going. I just updated firmware on CA and Phaserunner software hoping again for a fix. No dice. is the issue with L10 Baserunner if the Frankenrunner works? But you all tested the controller so that is confusing. Dashboard hall sensors fine like in your video. Bolton bikes controller works fine. I know there are plenty throttle options. I tried so many prior to sending Grin my motor, controller, adapter harness for testing.

@GrinTechnologies Год назад

Hi Lucas, have you spoken with our tech support team at info@ebikes.ca?

@GrinTechnologies Год назад

Try downloading the latest Phaserunner software suite and change the “motor stall timeout” on the main screen (bottom left corner) to 1000ms.

@robertcperry4377 Год назад

Hey man. I have 42 volt battery system.. I want top speed with some power.. I'll be doing mostly road riding.. I don't do hardly no off-road at all.. I'm on a bugit so what would u do if you was me. I have a hard tail with shocks in front.. 26 inch wheels.... I'd like to have at least 45 mpr no worried about range that much..

@GrinTechnologies Год назад

Hey Robert, I would simply get a hub motor with a fast motor winding, like 12 rpm/V, and a high current motor controller. 45 mph is ridiculous to expect, but at least 30+ mph is doable .

@jonvickerson7694 Год назад

Hi can I ask what are the forks on the RadRunner…?

@paul.alarner6410 8 месяцев назад

why no pinouts or schematics,or is it just a long advert?!

@GrinTechnologies 8 месяцев назад

Did you watch it? The last thing we want is to advertise using our stuff being used to modify factory ebikes since usually it's a total support nightmare. But we get asked about it often enough that we wanted to make a detailed video to show what it entails and hopefully discourage people who don't feel up to the task. We have detailed pinouts and user manuals for all the parts that we make which you will find in the associated user manuals. There is no "generic pinout" or schematic for a factory ebike, but luckily ones like this older gen rad runner are straigthforward enough to figure out.

@londongrace5784 2 года назад

What motor upgrade do you recommend for a higher wattage motor on the Radrunner?

@GrinTechnologies 2 года назад

It needs to be a wide axle fatbike motor which limits the options. But there are some large direct drive hubs for fatbikes that can be run at much higher power levels. At that point you need a new battery and new controller too, so you'd be replacing everything but the frame.

@GrinTechnologies 2 года назад

Your other option is to put on a front hub motor and do 2wd.

@Funermen 2 года назад

Bafang g062 for the radrunner make sure it's the z916 model for direct connection to stock/35amp controller. Or go with the the controller in the video and get the same motor but with the l1019 connector instead

@londongrace5784 2 года назад

@@Funermen Won't the g062 be too wide at 175mm? The Radrunner has rear drop outs of 160-165mm. This is the problem I've ran into.

@Funermen 2 года назад

@@londongrace5784 the radrunner is 168mm I believe. Which means you just need to be able to pry the rear frame open just enough and slide it in or file it down a bit and it will work perfectly. Plus motor cable will be on the same side as the 1.5 revision (unofficial revision name that has the motor cable out the brake rotor side)

@ManMan-b5y5c 7 месяцев назад

What size wheel had tge rad runner and whats the correct settings for the display under wheel settings

@GrinTechnologies 7 месяцев назад

The most correct setting is found my measuring the circumference of your particular tire, and inputting that in mm.

@user-BCNYOU Год назад

Hi, I was watching this video, had a question and wondered if you can answer it because you seem super good at all this lol... Very good video btw. So I just ordered a couple of ebikes from china that are dual bafang 1000 watt and dual 52v 22ah samsung each, I ordered one for me and one for my wife. They are not here for another month but i have been following a youtube channel that has the same bike so I can learn about it and I found an issue. He says that the front motor is connected to the front motor only and not the display so the rear wheel is connected to the display and the rear motor. He says if he runs the back one out he has to remove the front and back battery and swap positions to carry on. I thought the issue is probably that it does not have a battery switch in the system but another video shows it has two controllers at 28 amps each and then the two motors and the two batteries so can I even add the battery or ( parellel ) switch to this set up? Thanks in advance, Steve from Kimberley BC

@GrinTechnologies Год назад

Hi Steve, if you order your ebikes from china you should be expecting to get your tech support from China as well and not from us. They are the ones profiting from the bicycle sale and who should have built in the service overhead into their price model! That said it is not at all surprising that only one of the two controllers would be connected to the display. It's a bit silly to run independent batteries rather than a shared large capacity pack for a lot of reasons, but parallel connecting batteries via the discharge port can have risks too as you loose the cell overcharge BMS protection. See ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Ub4EP2_mAds.html If you want to learn more on the technical details about multi-motor ebike drives.

@user-BCNYOU Год назад

@@GrinTechnologies As an IT manager for several car dealerships that has just retired I was looking for information from the people that probably sell the product and since It was obvious that you know more about it than I do I thought I would ask what was needed before I buy the wrong thing. Thanks for your time, appreciated.

@john-martin Год назад

What front forks are those?

@oithetresen609 Год назад

woukd these upgrades also work for a radrunner 3 plus? They changed the battery and the controller and the display I believe. I also think the battery may have gotten some communication pins. I just really like the frame but being able to mod was one of the core reasons for my interest in rad in the first place.

@GrinTechnologies Год назад

For the display and controller changes it doesn't matter since those are getting swapped out, but if the battery actually needs controller communications in order to turn on then that would be a real bummer.

@oithetresen609 Год назад

@@GrinTechnologies Thanks a lot for your answer. Really appreciate it. :)

@benchapel9814 Месяц назад

@@GrinTechnologies this is one of the drawbacks my Aventon Abound presents - it uses 5 conductors from the battery to the controller. It's possible that the Runner 3 only uses two conductors in spite of having more than two connection pins

@ABC-wz2db 2 года назад

So good

@archibaldchisholm7208 3 месяца назад

I have the exact same bike, does anyone know any bike stores in Toronto that would do this for me? I'm not technically advanced

@onechampionshiphighlights9833 Год назад

Hi, would like to ask how many amps I can add to my scooter battery, currently running 48v 15ah. my controller is rated 20ah. can I use 48v 45ah on my 20ah controller?

@GrinTechnologies Год назад

You can use batteries of as many amp-hours as you like. Amps and amp-hours are two very different things. The more amp-hours of battery capacity the better. There is no such thing as a 20ah controller. There is only a 20A controller.

@ejonesss Год назад

you saying no bandwidth in the disclaimer now is kind of pointless since covid pandemic gave us more bandwidth and in some cases fiber optic to the house. me where i live i have unlimited download (no longer have to be careful how much i download a month no more having to war drive and use others wifi ). and my area is wired for fiber optic as well as my cable co offers fiber optic to the house all thanks to the covid pandemic. i know you folks of grin know what you are doing when it comes to electrical but for those who dont know as much or have as much experience with batteries . be sure to remove the battery from the cradle before cutting the plugs because lithium ion batteries have the capability to dump a massive amount of current and can easily throw sparks and even start a fire is shorted and can potentially be damaged by being shorted. i was wondering what bafang motor does the radwagon 4 use?

@GrinTechnologies Год назад

Fortunately most BMS circuits will trip a short circuit event well before any risk of fire or cell damage, but usually the arc will still be intense enough to damage your cutting tools. It's not clear if Radpower uses actual bafang motors with the logo removed or one of the many generic clone/copy motors of the G060 that are out there with nearly identical specs and looks.

@ejonesss Год назад

@@GrinTechnologies i just found out today that rad uses the G060 because it sais so on the clutch assembly

@yelyab1 2 месяца назад

You are very talented at electronics. A little weak on biomechanics. A 12 mph to 16mph head contact with concrete will most likely lead to a depressed scull fracture. That is a high severity injury converging on permanent losses (brain) and a secondary risk, brain slosh like jello in a mold. Not good. Localized losses in the opposite lobe from impact point. It is the velocity that most inflatable restraint systems in cars and light trucks are actuated. WEAK A HELMET SON, DONT SQUANDER YOUR BRAIN. YOU ONLY FEEL INFALABLE AND IN-DISTRUCTABLE. TIME DOES NASTY THINGS TO THOSE FEELINGS! HELMET ALWAYS, HELMET ALWAYS

@ernestniclas3727 Год назад

Is a 2 pin connector from the controller to battery

@GrinTechnologies Год назад

Usually most battery to controller connections are 2 pin, yes, and of a moderately heavy gauge wire .

@pcka12 3 месяца назад

How do you make e bikes go up hills better?

@GrinTechnologies 3 месяца назад

By delivering more torque to the wheel.

@pcka12 3 месяца назад

@@GrinTechnologies so please expand upon how that is achieved since so far we have reached the level of my 'O' level in physics!

@raczyk 6 месяцев назад

I have a rad-mini 4. Where would I buy the Frankenrunner controller?

@GrinTechnologies 5 месяцев назад

It's been discontinued. That item was always just a stop-gap motor controller when we couldn't get the Phaserunners produced due to chip shortages during the pandemic.

@raczyk 5 месяцев назад

@@GrinTechnologies So whats the alterantive controller for the rad power bikes?

@GrinTechnologies 4 месяца назад

The Phaserunner

@nicod974 Год назад

How do you know your battery bms can deliver 65A peak?

@GrinTechnologies Год назад

Either you can test it with a load that draws 65A, or you can find out from the company / supplier of the battery or BMS circuit. But most battery sellers don't really know much, or have nameplate specs on the battery sticker that don't necessarily match BMS cutoff specs. So the only way to know for sure it to actually measure it yourself.