Introducing the Sabourin Horn DIY Plans

Подписаться 8 тыс.

Просмотров 15 тыс.

50% 1

I discuss the new Sabourin Horn Series which is offered as a DIY build plan on my site. This horn is the successor to the summer rain and features some improvements and ease of construction.
Links
Product link to purchase the plans ($15 CAD)
josephcrowe.co...
Blog Post
josephcrowe.co...
All Speaker Plans
josephcrowe.co...
Current Blog Page: josephcrowe.co...
Legacy Blog Page: croweaudio.blog...
Website: josephcrowe.com/
Facebook: / josephcrowediy
Intagram: www.instagram....
Pinterest: www.pinterest....
Email: joseph_crowe@josephcrowe.com
Troy Joseph Crowe is a small business located in Canada. He offers custom audio products such as wood horns and speaker cabinet design. He provides services to either individuals, small businesses, or start-ups. All of His designs are available for personal use in the form of 3D CAD files or CNC G-Code. If using for commercial use then licensing may be required for certain technologies. Joseph Crowe has a background in Mechanical Engineering Technology with extensive experience in both the Audio Industry and the Automotive Industry. All design work is done using SolidWorks 3D CAD modeling software. His focus is on audiophile two-channel music systems for the most accurate sound reproduction. Joseph Crowe follows a very methodical design process. Using acoustical and electrical measurement, along with various computer simulations, he can achieve designs that meet or exceed the original performance

Опубликовано:

9 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 21

@dynaudiofocus 3 года назад

Excellent, thanks for the upload, I'm tempted to build this to replace the summer rain

@JasonLeaman 3 года назад

Nice work Joseph ! Keep it up !!

@CABohol 3 года назад

Nice

@butziporsche8646 3 года назад

Hi Joseph, I was going to order some of Martin Seddon’s LeCleach flare horns driven by my Lowther drivers. I may want to build these instead. Would it work out if 16ga. steel damped on the back side with rubberized undercoating? I could then easily do a continuous curve and skip weld stiffeners to the backside.

@spalmgre9167 3 года назад

Waiting to see some measurement curves. also polars. It's a challenge to make a compression driver to go from 300 to +10kHz. So what about a horn from 800Hz as that makes it possible to do 2-way + dual sub setup. Possible drivers JBL D2430K (344$) or Eminence N314X-8 (345$) or with a 1" throat possible 5530/31ND.

@raynerstuelgalid 2 года назад

Hi, so this horn mates well with the B&C 8PE21? Thanks.

@JosephCrowesDIYSpeakerBuilding 2 года назад

I would suspect this would be a good combination. The 8PE21 was excellent in the Summer Rain Horn.

@butziporsche8646 3 года назад

Would my DX3s be good in this configuration?

@JSchurter 2 года назад

Can this horn be made smaller 14x14

@rajdeepsingh3539 2 года назад

what are the advantages and disadvantages of conical horn as used by OMA imperial speaker

@JosephCrowesDIYSpeakerBuilding 2 года назад

Conical are more similar to constant directivity type of horns which a almost exclusively used in live sound reinforcement. They have a unique constant coverage regardless of frequency. The trade off is some horn colouration due to the reflections off of the horn mouth. In terms of sound quality it’s very well documented that this has a detrimental affect.

@beezwaks 2 года назад

How would these do as top section for a small reggae sound you think? Would have them over 12 inch ported mid highs.

@JosephCrowesDIYSpeakerBuilding 2 года назад

Yes, using a good compression driver will yield a maximus SPL of around 105dB SPL at 1m if distortion is to be kept below 0.56% (-45dB).

@marlonno2201 2 года назад

Is there a plan for that tall speaker with this Horn in the middle ?

@JosephCrowesDIYSpeakerBuilding 2 года назад

Sorry no it was just a quick rendering for inspiration. There is a finished design called the Sabourin 1309 if you look it up.

@keith6167 3 года назад

Would you recommend thee B&C 8PE21 for mid range duty like the summer rain and what range do you think it could cover

@JosephCrowesDIYSpeakerBuilding 3 года назад

You can email me at Joseph_crowe@josephcrowe.com I have direct experience with that driver. It’s very good.

@keith6167 3 года назад

@@JosephCrowesDIYSpeakerBuilding Thank you I will for sure

@MrArnand 3 года назад

Hi Joseph, do you use Ath for designing horns?

@JosephCrowesDIYSpeakerBuilding 3 года назад

I use Hornresp for some of the design. The rest is trial and error based on actual testing through acoustical measurement and listening.

@MrArnand 3 года назад

@@JosephCrowesDIYSpeakerBuilding okay then. If you haven't, I'd encourage you to check it out. It's such a great peace of software. A lot of features and improvements have been made recently.