Introduction to the PicoScope 7 Waveform Library 

"Checked for plausibility" is how we can best put it! Thanks for your continued support, Martin.

@@pico_barney. Quite right, Barney; I could have phrased it better.: ‘moderated’ carries extra undertones nowadays. (I don’t know how feasible for a malicious infection to be unintentionally uploaded at the same time, but, given how serious Pico views cybersecurity, I presume that a virus check is also part of the plausibility check.) I forgot to add how pleased I was that all the PS6 waveforms got imported across. I’m not sure why, but I was half expecting the PS6 waveform library to become defunct. Finally, Pico will always have my support; it’s a pleasure to do so. Best wishes Martin

Hi Edward, yep, it is a very good opportunity to ask that. It is definitely our aim that we will always do this in the future. We have quite a few things in the pipeline so watch this space!

PicoAuto software does not work with 2204A!

Hi Douglas, I've replied to this message twice already but the replies keeping getting deleted. In short, PS7A supports both M1 and Intel Macs, as long as they are running the most recent mscOS versions (e.g. either version 12 or 13 as of November 2022).

@@pico_barney , I'm aware it supports both M1 & Intel based Mac's. However, on an M1, it uses Rosetta to translate the Intel based code to ARM64 (M1). Most modern day applications for MAC use whats called a "universal binary" that during the install will check the processor (M1 - ARM64 or Intel - X86) and install the appropriate code for the processor. So, if Pico in the future uses Universal Binaries for Mac's. Then when an M1 user, like me installs the SW. They will get a native M1 (ARM64) application. This has many inherent benefits for M1 users.

Hi @@douglasmontgomery6315. I've checked where we are with this with the dev team. We are looking to have full ARM64 support in around Q4 next year so going forward we will be able to have the benefits you mention. In the meantime... there are other cross-platform improvements we are looking to make, so keep an eye out for those through 2023...

@@pico_barney , thanks for the quick response and appreciate all you and the team are doing to include MACOSX !

Hi, many thanks for your support. Take a look at Pulse Width triggers. You can access those by clicking on the Trigger lozenge (control) and Change type in the Trigger options panel that opens up. After clicking on Pulse width trigger in the trigger types the options panel will show you all the options for the Pulse width trigger. In there you can select the time condition, which will determine the length of time the signal will need to have dropped out by before the capture is triggered. Don't forget to set the Trigger mode to Single if you expect it to be an infrequent one-off event. Hope that helps.

No.

@@SaeligCoInc 😥😭

@@SaeligCoInc Buen día a partir de qué modelo tienes acceso a la librería

My primary language is Spanish, secondary English and i understand perfectly.

Es solo una broma. Ben and I talk frequently about Formula 1 and business.