The tutorial of today is about how to fix a water damage iPhone X and will gonna show it to you the full process of the dissambly, the ultrasonic cleanning and the assembly of the device. It is a video a little bit longer than normal but where we show you all the steps for do the right cleaning.
For you to fix an iPhone X that has been wet with pool water and that does not start because of the humidity, you need to know and follow the steps we are going to present below:
Step 1: Disassembly the iPhone completely.
Step 2: Look under the microscope for the motherboard, possible humidity, rust, motherboard damage, short circuit, burned components.
Step 3: Insert the motherboard into the ultrasonic washer.
Step 4: Clean the base plate manually + cleaning with isopropyl alcohol.
Step 5: We clean the connectors and the motherboard manually.
Step 6: With a heat gun dry the motherboad, 10 minutes 50º.
Step 7: We put the motherboard plus the components.
Step 8: check the correct functionality of the
If you are not a repair technician and you ve got problems with the process of dissambly or with your device ,it would be in the best of your own interest,not to attempt a repair that you really cannot handle. Because there is a huge risk that you will actually end up doing more harm than good.
MovilOne is not responsible for any damages that may occur during the repair due to missing tools or insufficient experience.
Comments and questions regarding this repair are always welcome :)
If you want to contact us you can do it, by the form contact on our web site www.MovilOne.es or by the phone: 0034.958.179.492
Enjoy it :)
29 авг 2018
