Is this GENERIC $99 Laser From AMAZON Really That GOOD!?

Подписаться 20 тыс.

Просмотров 64 тыс.

50% 1

You're going to be pleasantly surprised when you see the results of this little $99 Generic Laser! I couldn't believe it myself! Super Easy and Fun to use!
Buy your $99 Cylinder Laser Here:
amzn.to/3LAa9kA
AND / OR
Buy FoxAlien CNC Masuter Pro on Amazon here:
amzn.to/41XVVAK
Buy Your CNC Bits on Amazon Here:
amzn.to/3kTqjv9
Buy Your Calipers on Amazon here:
amzn.to/3KWO4NC
Note:
As an Amazon Associate, I earn from qualifying purchases.
Thanks for Watching! If you like what you watched... Please give us a thumbs up and Subscribe! Don't forget to click on the Bell to be updated on more uploads!
********************************************************************
Buy Your KalindsLife, JigginJunkie and Crawlspace Craftsman Merch Here:
www.Kalinds.Life
Check out this link!
linktr.ee/kalindslife
*********************************************************************
Want to help support our channel and drive to offer better content!? Visit our Patreon page at the link below and become a Patron of ours with a small support donation. This will give us the ability to do what we love and upgrade equipment, buy props and items for new videos and much more! Thanks so much for considering!
/ kalindslife
*********************************************************************
Click on the link below to order some AWESOME KalindsLife and More items!!! We get a small percentage of each sale and put all money made back into the channel so we can continue to make fun and exciting videos for you to watch!
shop.spreadshirt.com/KalindsL...
*********************************************************************
Also don't forget to Follow us on.....
Email: TheCrawlspaceCraftsman@gmail.com
Instagram: ⁠⁠⁠‪@TheCrawlspaceCraftsman‬
Discord: discord.gg/9dCxPEMtXY
*********************************************************************
Filmed On: Sony ZV-1F = amzn.to/3LEmwvQ
Edited On: iMovie
Thumbnail Image: Thumbnail Maker
Microphone: GoPro 9 Media Mod
Music: EpidemicSound.com
*********************************************************************
#foxalien #cncmachine #cnc

Развлечения

Опубликовано:

6 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 47

@Theexplorographer 10 месяцев назад

You could easily 3D print a spacer for the laser and that bracket. Plus, that plastic shield looks like it could also be drilled out for air assist without too much effort as well. Good find.

@TheCrawlspaceCraftsman 10 месяцев назад

You are 100% correct!!! I was thinking about CNC a ring from wood (no 3D printer ATM!) Thanks for the idea!!!

@Jbzy3000 10 месяцев назад

@@TheCrawlspaceCraftsmanjust picked up a couple at 50% off from microcenter.

@paulogomes1679 7 месяцев назад

To fit that on your machine just cut 2 washers of that plywood you have on video internal diameter same the laser external diameter same than the motor bracket easy for you if don't have a lathe to do a proper adapter and will be solid on bracket😉

@TheCrawlspaceCraftsman 7 месяцев назад

The video after this one shows me making a small bracket as you described in the comment. Check it out! Thanks for watching!!!

@ericblenner-hassett3945 10 месяцев назад

Check what your local plumbing supply store has for adapters. If you measure the thickness of the original split tube for holding the motor and made one from an adapter ( so the larger flange area acts like the lip ) you may find one thin enough for the laser and act like a C shim ( tube with a slot cut out to allow it to be shrunk around like the motor's shim ). Interesting idea to use the furry part of Velcro to do a similar job and not mark up the inner diameter of the tool holder. The other option is to get plate aluminum of at least 5 mm and make a bracket specifically for it. The reason for at least that thick is so you can slot where the laser holding plate will fit and help with keeping it at a 90 degree from the Z mount.

@TheCrawlspaceCraftsman 10 месяцев назад

Thanks for the idea! I posted today my remedy for the issue!!! Thanks for watching!!!

@tevya017 9 месяцев назад

looks like the casing of the small engraving motors was used.

@TheCrawlspaceCraftsman 9 месяцев назад

I don’t think this one was used.

@ramenreview 10 месяцев назад

Wow that thing looks like a lot of fun hnn

@TheCrawlspaceCraftsman 10 месяцев назад

Laser & CNC is a ton of fun!!!!

@sus8e462 10 месяцев назад

Odd you never mentioned the ventilation needed for the smoke & nasties from many materials when burned, and the need for safety glasses since there's the "focus" gap where the beam is exposed... But if you already have all the gantry and programs & good ventilation, not a bad option to add an extra tool. But etching metal is impossible at that low power. You need a special coating which the laser then initiates a reaction on the metal to create the image...

@TheCrawlspaceCraftsman 10 месяцев назад

I could have added some of those facts in the video but this really is a “replacement” laser for the most part. There is so much Laser Education videos out there that I just wanted to keep focus on the Laser itself and nothing more. Thanks for watching!

@joshuaklingensmith7843 10 месяцев назад

You could cut the sleeve on a bandsaw and that would compress down small enough to fit that laser and still be able to use on the milling head.

@TheCrawlspaceCraftsman 10 месяцев назад

My Saturday video is going to be how I fixed the problem!! Thanks for watching!!!

@joshuaklingensmith7843 10 месяцев назад

@@TheCrawlspaceCraftsmanyou're welcome

@user-vi7fc7tw1u 4 месяца назад

On the fox Alien generic laser how did the wiring match the fox aliens receptacle? The video on the fox alien you showed a separate control box that you taped on to the front. What do we do in the case of purchasing the generic?

@TheCrawlspaceCraftsman 4 месяца назад

The little control box is specifically for the 20w laser as it’s needed for its one power. Otherwise it will just plug directly into the main control box and use the power from the Foxalien controller. Pretty much plug and play.

@W4TRI 10 месяцев назад

So I have a 3015 gathering dust. This may get it back working. Thanks! What is the exact width of the laser case?

@TheCrawlspaceCraftsman 10 месяцев назад

I can double check in a bit but I’m pretty sure it’s 44mm! Awesome and get that baby going!!!

@anthonystrong7075 9 месяцев назад

That us too cool.

@TheCrawlspaceCraftsman 9 месяцев назад

Thanks for watching!

@Mikehatespigs 8 месяцев назад

So, could something like this go on a 3d printer your not using anymore?

@TheCrawlspaceCraftsman 8 месяцев назад

I’ve never seen it done before. I’m not sure If Lightburn would recognize the printer. I’m going to put it out thare and say no. 🥴

@parker1ray 10 месяцев назад

My Xtool 20 Watt will cut through 3m at 560 mm/min. It did cost $1100 though LOL!

@TheCrawlspaceCraftsman 10 месяцев назад

Those XTools are nice but 💰💰💰. Maybe someday I’ll try one out. I’d love to try their software too.

@IH1940HAY 9 месяцев назад

How does the software control the on and off of the laser?

@TheCrawlspaceCraftsman 9 месяцев назад

Lightburn tells it when to turn in and off and power. It’s pretty amazing!

@robrdavis 9 месяцев назад

The Amazon link now links to a different $99 5W laser. There are 4 options on the page, and the one laser that looks similar to the one in the video is only 2.5W (optical). It DOES appear to be the same seller/manufacturer, but take notice as to what you're ordering!

@TheCrawlspaceCraftsman 9 месяцев назад

I’ll check it out!!! Thanks for the heads up!!!

@TheCrawlspaceCraftsman 9 месяцев назад

+Rob Davis looks like your right! Maybe they sold out so replaced with the “Square” one! It’s still fixed focus and 5.5w Optical and comes with safety glasses so that’s cool. Hopefully the cylindrical one comes back as described! Thank you!

@starhawke380 9 месяцев назад

What if you need to laser something that isnt flat?

@TheCrawlspaceCraftsman 9 месяцев назад

It will most likely get out of focus on the lower and higher spots and not look right. You can get a rotary tool that will roll items such as mugs but that’s about it.

@starhawke380 9 месяцев назад

Im thinking about something like small river rocks, like you would use for skipping across calm water.@@TheCrawlspaceCraftsman

@TheCrawlspaceCraftsman 7 месяцев назад

You can do those….

@fsr402 8 месяцев назад

I just wish you would pronounce Ma-Su-Ter correctly. LOL Other than that, nice.

@TheCrawlspaceCraftsman 7 месяцев назад

Sorry!

@kevinvernon3600 9 месяцев назад

Do not look in laser with remaining eye. ;)

@TheCrawlspaceCraftsman 9 месяцев назад

I highly recommend not looking at the laser with your remaining eye! 😉

@pathann4195 9 месяцев назад

Audio issues need new mic.

@TheCrawlspaceCraftsman 9 месяцев назад

Really? I didn’t think it was bad but I do plan on getting a Rode or DJI soon. What are you hearing that’s bad. Any feedback so I can do better would be greatly appreciated!

@microponics2695 9 месяцев назад

It's only a 5w OP this would only be good for some engraving and paper cutting.. sure it would burn wood or cut it if it's really thin and you do like 10 passes on 100% Not worth $99 you can get 5w's for less than $50

@TheCrawlspaceCraftsman 9 месяцев назад

+Microponics 10 passes? Did you watch the video? I did mention that’s it’s 5w Optical and demonstrated that it will cut 3mm Bass wood in 1 pass. Yes there are less expensive lasers and yes I have a video on one of those too. Check them out! Thanks!