My NEW FoxAlien Masuter Pro CNC Machine! The Basics you NEED to get you going!

Подписаться 20 тыс.

Просмотров 69 тыс.

50% 1

I believe I found my new favorite tool for the workshop!!! If your planning on getting into CNCing, I highly recommend this machine!
Check out FoxAlien using my Affiliate Link Here:
www.foxalien.com?sca_ref=3491064.Cgy97aKmUB
OR
Buy FoxAlien CNC Masuter Pro on Amazon here:
amzn.to/41XVVAK
Buy Your CNC Bits on Amazon Here:
amzn.to/3kTqjv9
Buy Your Collets on Amazon here:
amzn.to/3KWO4NC
Buy Your Calipers on Amazon Here:
amzn.to/46hRl1h
Note:
As an Amazon Associate, I earn from qualifying purchases.
Thanks for Watching! If you like what you watched... Please give us a thumbs up and Subscribe! Don't forget to click on the Bell to be updated on more uploads!
********************************************************************
Buy Your KalindsLife, JigginJunkie and Crawlspace Craftsman Merch Here:
www.Kalinds.Life
Check out this link!
linktr.ee/kalindslife
*********************************************************************
Want to help support our channel and drive to offer better content!? Visit our Patreon page at the link below and become a Patron of ours with a small support donation. This will give us the ability to do what we love and upgrade equipment, buy props and items for new videos and much more! Thanks so much for considering!
/ kalindslife
*********************************************************************
Click on the link below to order some AWESOME KalindsLife and More items!!! We get a small percentage of each sale and put all money made back into the channel so we can continue to make fun and exciting videos for you to watch!
shop.spreadshirt.com/KalindsL...
*********************************************************************
Also don't forget to Follow us on.....
Email: KalindsLife@gmail.com
Instagram: @KalindsLife
Discord: discord.gg/9dCxPEMtXY
*********************************************************************
Filmed On: GoPro 9 w/ Media Mod
Edited On: iMovie
Thumbnail Image: Thumbnail Maker
Microphone: GoPro 9 Media Mod
Music: EpidemicSound.com
*********************************************************************
#foxalien #cncmachine #cnc

Развлечения

Опубликовано:

6 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 142

@SaferiderS1000RR 8 месяцев назад

I know nothing about CNC so this really puts me at ease. Big thanks from the Gold Coast, Australia!

@TheCrawlspaceCraftsman 8 месяцев назад

Awesome!! Just dive in! I did!

@jonwoodworker Год назад

Ditch the glue and tape and get some XFasten double side tape. Throw the metal clamps away. Tape your spoil board down, mine has never come loose. Putting the trim router in is a game changer.

@TheCrawlspaceCraftsman Год назад

WoW! I checked out Xfasten and appreciate the tip!!! Added to my list of things to buy! TY!!! I did enlarge my spoil board and ditched the clamps! Thanks for the tip and watching!

@Riless42 4 месяца назад

Xfasten is what I use. I’m surprised more RU-vidrs aren’t talking about it. No residue, a secure hold, and not that expensive, a little goes a long ways.

@NikElectric24 3 месяца назад

@Riless42 hi is it the XFasten woodworking tape you use? I've been a few different versions of XFasten double sided tape, but I assume its the Woodworking one you use?

@TheDuttonExperience 27 дней назад

This

@foxalien_official Год назад

That is really awesome! Thanks for sharing this project with us!

@TheCrawlspaceCraftsman Год назад

Absolutely!!! Many more videos using this to come! If you have any ideas…. Send them my way!

@foxalien_official Год назад

@@TheCrawlspaceCraftsman Guitar or skateboard building withe the 4080 extension kit will be cool!

@elizabeththrockmorton9318 Год назад

Thank you so, so much for making this video. It makes this beginner process so much easier and less stressful because there is SO much information out there. Your video is more helpful than you could ever know!

@TheCrawlspaceCraftsman Год назад

Super glad it helped out. More to come!!!

@elizabeththrockmorton9318 10 месяцев назад

@@TheCrawlspaceCraftsman I am settled inwith my machine and have made several things with the bits that you recommended, but now I'm wanting to experiment with a v-pocket bit and am running into issues with jscut. I'm using jscut to convert my svg to gcode. What program do you use to do that?

@TheCrawlspaceCraftsman 10 месяцев назад

@@elizabeththrockmorton9318 I would use Easel by Inventibles. It’s an online program and super easy to use!

@elizabeththrockmorton9318 10 месяцев назад

@@TheCrawlspaceCraftsman Oh! I guess I thought that was just to replace Candle. Do you do all the steps from design to execution in Easel?

@TheCrawlspaceCraftsman 10 месяцев назад

@@elizabeththrockmorton9318 i do yes. I haven’t dived into many other programs. Easel works well for me and my needs. I do pay for the pro program too. Yes it’s $24/month but I don’t have many other things I pay for monthly so it’s worth it for me.

@ThatHobby Год назад

That's a pretty cool tool! I wasn't sure about it until you put it on the belt sander. It came out really clean. That was awesome!

@TheCrawlspaceCraftsman Год назад

That’s totally because of the wood I was using I believe. When I use a solid wood…. It’s perfect!!! Im good to make more videos with it and show that VERY soon so stay tuned!

@ThatHobby Год назад

@@TheCrawlspaceCraftsman I like that belt sander too. I am adding both of those tools to my wish list! Great stuff! I can't wait to see some more videos.

@Alex-rf1md Год назад

@@TheCrawlspaceCraftsman a downcut spiral flute could possibly eliminate all those "burrs shavings" from the top by pushing the cut material instead of pulling it over the edge.

@nikkip5320 13 дней назад

Really informative video. I’m thinking about buying this model. Thank you so much

@TheCrawlspaceCraftsman 13 дней назад

I would recommend purchasing the Masuter 3 or 3S by FoxAlien! It’s an upgraded version.

@Alex-rf1md Год назад

I am a pro at cnc programing and operating on 500k+$ machines in a shop but I dont know where to start my hobby cnc router in my basement, your videos are great!!

@TheCrawlspaceCraftsman Год назад

Thanks a lot! Appreciate that!!!

@lucyharayda179 22 дня назад

This is a really good video, I needed a dummy video and this helped so much, so many details so very happy with this. hope you can provide some acrylic text designs, carving|engraving on acrylic tutorials step by step. You have earned a new subscriptions and like.

@TheCrawlspaceCraftsman 19 дней назад

Awesome! Glad ya loved it! I have so many videos planned it’s not funny! LoL

@TheCrawlspaceCraftsman 19 дней назад

I’m planning on more Project videos and less Review in the near future!

@TimothysTractors 6 месяцев назад

Nice Bucees hat!

@TheCrawlspaceCraftsman 6 месяцев назад

LoL. Purchased at Bucees in Florida on I-95 Daytona!

@TAGSlays Год назад

Plywood is fine to use. The problem is that you didn't use a sprial downcut bit. Most of the cheap bits out there are upcut bits and they tear out wood like crazy.

@TheCrawlspaceCraftsman Год назад

I’ve leaned quick the direction of the cut determines the tear out. Even though this was a test….. down cut would be the way to go especially on ply. Thanks for watching!!!

@TheCrawlspaceCraftsman Год назад

I’d rather blow out the bottom of the wood (the part you don’t see usually) than then top.

@ambitiouzflow7287 Год назад

Dope video bro. Thanks for sharing, quick question , can the table hold a 1.5” piece of material or would that be too big?

@TheCrawlspaceCraftsman Год назад

Thanks so much! It can cut about 15” x 15” and easy hold 2” thick. I don’t think it could cut through 2” though only because you’d need a long bit and I don’t believe it will raise that high. But def can cut through 1” yes.

@mtz3843 Год назад

great vid, i learned alot, im thinking about getting that fox but with the laser too, did you get the laser also?

@TheCrawlspaceCraftsman Год назад

Not yet! Tomorrow I’ll be doing a video on the Offline Controller and then soon another awesome upgrade! I plan on getting the laser as well…. I hope!!!

@garybarretta9394 Год назад

Great video. How long did it take to cut out the mickey head? Thanks

@redroses3515 11 месяцев назад

Thanks for the video! What wood would you suggest to avoid having to sand it?

@TheCrawlspaceCraftsman 11 месяцев назад

Hi there! I think there’s always going to be a bit of sanding involved especially after a project is completed no matter what kind of wood you use. But to answer your question line would be the best to start with as it’s soft and easy to work with. Lowes sells nice 3/4” pine panels that’s a good place to start. Thanks for watching!!!

@johnprosser2142 5 дней назад

Thank you so much for the video! Are you still happy with the machine? At that price they just seem too good to be true!

@TheCrawlspaceCraftsman 5 дней назад

I am!! I used it yesterday evening. I like the the Masuter 3 a little better though. It’s an upgraded version only they don’t have an extension kit available as of yet but it’s on the way! Thanks for watching and let me know if there are any questions!

@johnprosser2142 4 дня назад

@@TheCrawlspaceCraftsman thank you so much for your reply and information! I have checked out the Masuter 3 on their website and it’s not much money to get some great upgrades! If it wasn’t for you, I wouldn’t have even looked at the Master 3 thank you!

@lorithompson6891 10 месяцев назад

This video is great we have the same cnc ( two weeks ) and I have being using the trial version of easel. Question…. I During set up I see the mouser pro which option did you choose. I have been able to get a design done but it came out smaller than the size I input. I was wondering if the machine I choose might be the problem.

@TheCrawlspaceCraftsman 10 месяцев назад

That weird. I’m not sure why your output would be smaller honestly. Shouldn’t have anything to do with Machine name.

@karlz2518 Год назад

I got my Masuter pro yesterday, building up as this is playing in the background lol keen to see how it goes

@TheCrawlspaceCraftsman Год назад

Let’s Gooooo!!! How did the build go!!

@grenvillebamford1205 7 месяцев назад

I use double sided tape all the time it's brilliant. You literally just made some.

@TheCrawlspaceCraftsman 7 месяцев назад

I have to try this…. amzn.to/48ilyi6

@arieldesign9642 Год назад

Thank you for activating the subtitles in Spanish, I have a masuter pro and there are no videos in Spanish

@TheCrawlspaceCraftsman Год назад

💯!!! Thanks for watching!!!

@user-zj6kv5mn3d Месяц назад

Newbie here, great video. I’m wondering how loud it gets.

@TheCrawlspaceCraftsman Месяц назад

It’s the spindle that’s loud. The stock 70w spindle literally sounds like an RC car at full speed. If you upgrade the spindle to a palm router… well… that’s a different story. Hope that helps gauge the sound a little.

@dbennett3866 Год назад

Is this machine good enough to do inlay work with small letters and numbers ? Thumbs up on the video, Thanks

@TheCrawlspaceCraftsman Год назад

Inlays are tricky things! I have done Male / Female Bow tie inlays with it but never small letters and numbers. I’m in a group called Foxalien CNC Router & Laser Machine Group where i saw a guy doing some intricate inlay work on cutting boards. Short answer is Yes. It takes some practice but I don’t see why not! And thanks for watching! 80w laser video coming in a couple weeks!

@donspoor8367 7 месяцев назад

Do any of the Fox Allien machines come with software? Also how loud is the rougher? What do you think is the best software? If you could only buy one machine for a beginner, what would it be?

@TheCrawlspaceCraftsman 7 месяцев назад

They do provide a free software but it’s not that great. I don’t use it. I personally use Easel for all my needs. I’m not a pro in all the available software out there so I would research more for your budget and needs for sure. I absolutely love the Masuter Pro for a beginner. It’s super easy to build and really easy to operate. I would invest in the extension kit right away for a larger work area. 31x16 oppose to 16x16 (rounded up).

@scottf725 Месяц назад

Where's the link for the Etsy shop? I'm curious about the end products.

@TheCrawlspaceCraftsman Месяц назад

Heya Scott! I’ve really put that off for a little while but plan on adding to by August. If you go the my link.tree in the comments there is a link there.

@rogerpeters6255 4 месяца назад

what size Colette adapter works for the Haber router for use of the 1/8 bits?

@TheCrawlspaceCraftsman 4 месяца назад

E11 collets available on Amazon!

@TechExplainedArabia 6 месяцев назад

thank yuo for the video, but im facing an issue with depth cut , it doesnt cut all the way , i configured the thickness of the material and i set the bit into top corner of stock surface

@TheCrawlspaceCraftsman 6 месяцев назад

Have you made sure you Z-prove is set correctly? Also what program are you using ? Easel? You can email me or message me on FB messenger if you’d like!

@TechExplainedArabia 6 месяцев назад

@@TheCrawlspaceCraftsman yes I have Z prob I’m using easel and tool path created from fusion 360

@aquariumshrimp 9 месяцев назад

Etsy link? Would like to check it out what you can make with the fox alien.

@TheCrawlspaceCraftsman 9 месяцев назад

www.etsy.com/shop/BarnAndBlossoms

@xyzspec82 Год назад

Try a downcut type cutter. (or a compression type) You're welcome lol

@TheCrawlspaceCraftsman Год назад

LoL. Ok! TY!! Can you explain why just for my and others info. 😊

@xyzspec82 Год назад

@@TheCrawlspaceCraftsman I know I'm late... I suggested this, so that it leaves a clean cut on top (no sanding required)

@TheCrawlspaceCraftsman Год назад

@@xyzspec82 I purchase a downcut bit and can’t wait to see the difference!!!

@billieb Год назад

link to harbor freight vid with whatever you were going to attach?

@TheCrawlspaceCraftsman Год назад

Upgrading my FoxAlien Masuter Pro with a Harbor Freight Bauer Router! ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-gnZIx5YGIJc.html Thanks for watching!!!

@Dari0Medina Месяц назад

hihihi can the machine works with vcarve program? greetings from Chile

@TheCrawlspaceCraftsman Месяц назад

It will work with VCarve! Thanks for watching!

@mohammadrawshdeh7579 Год назад

Hello sir. I want your advice.. am planning to start a business.. do you advice to use cnc router for engraving on acrylic .. example ( engraving photos.. logos.. ets) And thnx again

@TheCrawlspaceCraftsman Год назад

100%!!! Using a CNC will drastically reduce your production time and increase quality!! I love my FoxAlien and think you would too!!! I’ll be doing a live stream next weekend building one so come by and say hello!

@mohammadrawshdeh7579 Год назад

@@TheCrawlspaceCraftsman thnx for replying.. does the photo quality will be clear as the co2 laser or less ?

@leozacic 4 месяца назад

Thank you so much for this videos, new subscriber for sure and I will check out your content. Hopefully you can help me, what bits do I need to carve on concrete? Thanks in advance.

@TheCrawlspaceCraftsman 4 месяца назад

Oh wow! That’s awesome! I havnt done any carving on concrete but I would say you need diamond tip bits, very slow and shallow passes as well as keeping your concrete sprayed with water. Its will be very dusty and you wont want to breathe that in so a mask while in the shop would be a good idea too! Concrete dust in the lungs is not a good thing!

@TheCrawlspaceCraftsman 4 месяца назад

amzn.to/3v7xhlB

@leozacic 4 месяца назад

@@TheCrawlspaceCraftsman Awesome, thank you. I will give these a try.

@Hillbillyoutdoors38 11 месяцев назад

Is there a free program that you can run this cnc with? If so what would you recommend?Thanks in advance!!

@TheCrawlspaceCraftsman 11 месяцев назад

Easel online has a free version that is good to start with. I even recommend the Pro version even if you only use for a couple months until you get things figured out. There are others out there as well but Easel is great!

@Hillbillyoutdoors38 11 месяцев назад

@@TheCrawlspaceCraftsman thank you very much!!!

@sistemas_jr 3 месяца назад

I havent seen anyone engrave acrylic. Can it take on that material??? whats your guess?

@TheCrawlspaceCraftsman 3 месяца назад

Yes! You need to watch your bit speeds as it will get hot and could melt the acrylic and bind up on the bit!!

@sistemas_jr 3 месяца назад

@@TheCrawlspaceCraftsman thank you for your response! 👍 Learned a los from your videos. o have one more subscriber here. Have a great day!

@tamarathompson8001 4 месяца назад

Can you use Vectrix with this machine?

@TheCrawlspaceCraftsman 4 месяца назад

I believe yes although I do not use it personally.

@user-jt5vm3mi1w 5 месяцев назад

Lol I want one to make spraypaint stencils

@TheCrawlspaceCraftsman 5 месяцев назад

It could work but maybe a Cricut or Plotter would be better for that.

@user-jt5vm3mi1w 5 месяцев назад

@@TheCrawlspaceCraftsmanOk I will look

@GHOSTRIDER718 8 месяцев назад

Hi, how can i use my mac os with this cnc machine.

@TheCrawlspaceCraftsman 8 месяцев назад

Your best starter program to use is Easel by inventables. It’s on online based program and super easy to use. The Pro version is $24/month but it’s worth it for a few months until yon get used to how the CNC works. I actually pay for it and use it for a tax right off business expense.

@duallity2403 4 месяца назад

I don't know if you still read these or not, but here goes. When you decided to switch from the 1/8" to 1/16" bit to get all the detail, couldn't you have started with the 1/8" to hog out the majority and then step down to the 1/16" to finish it?

@TheCrawlspaceCraftsman 4 месяца назад

I do read these still!! LoL. Absolutely yes. I’m impatient sometimes and don’t do two bits! LoL

@TheCrawlspaceCraftsman 4 месяца назад

(Like I should!!!)

@bluntzera8238 19 часов назад

I want to buy that small router to make plastic parts. Do you think the machine could handle cutting 3mm aluminum sheets too?

@TheCrawlspaceCraftsman 18 часов назад

You can definitely do the plastic parts but if you’re interested in metals you can probably get that done too. I would highly recommend looking into the Masuter 3s. It’s a little more money but you’ll be happy you did! amzn.to/3MgogM5

@TheCrawlspaceCraftsman 17 часов назад

Also check on my video on Masuter 3. I’ll be review on the Masuter 3s this week and do a side by side.

@bluntzera8238 Час назад

@@TheCrawlspaceCraftsman thanks a lot! After watching your videos I saw others upgrading the masuter pro with linear ball bering extensions too. I will be keeping an eye for your upcoming review on the new 3S model for sure. Amazing content! Thanks for helping!

@andrewsims7366 10 месяцев назад

Just FYI, the link for the calipers is not correct.

@TheCrawlspaceCraftsman 10 месяцев назад

Wow! Dang! Thanks for letting me know! I updated the links! I’ll have to check other videos later! Thank you! 🙏

@Bernardgrubb 7 месяцев назад

If you had used a down cut bit you would have had much less tear out on plywood

@TheCrawlspaceCraftsman 7 месяцев назад

Downcuts definitely are good for plywood! I don’t cut ply much but you’re def correct! Thanks for watching!!!

@paul_hartsel24 Месяц назад

I just bought the same cnc machine. I can not get easel to recognize it through usb connection. Did you have that problem? can you please help?

@TheCrawlspaceCraftsman Месяц назад

Did you twist the emergency stop bottom after setup?

@paul_hartsel24 Месяц назад

@@TheCrawlspaceCraftsman I did not know about that little trick. I would be trying that when I get home tonight.

@TheCrawlspaceCraftsman Месяц назад

+@paul_hartsel24 yup! They come usually pressed in. Try that!

@paul_hartsel24 Месяц назад

@@TheCrawlspaceCraftsman it works thanks so much

@TheCrawlspaceCraftsman Месяц назад

@@paul_hartsel24 was that the issue??? Glad to hear your up and running either way!

@watchclubent.3956 Год назад

How deep can you cut with that CNC?

@TheCrawlspaceCraftsman Год назад

So you can cut as deep as the end mill is long. I have bits that are 1” long. That’s about the max I would do with this machine. You can fit media as thick as 2.5”.

@roydennis1529 Год назад

Have you tried laser cutting with your CnC machine?

@TheCrawlspaceCraftsman Год назад

Not yet!!! I really need to add a Laser!!!

@madebyshaypie 4 месяца назад

Mine doesnt cut all the way through the wood and it is so frusterating! Im not understanding why?

@TheCrawlspaceCraftsman 4 месяца назад

Could be a number of things. Did you set the actual thickness of wood. Use calipers to be exact in MM.

@madebyshaypie 4 месяца назад

I did yes, only cutting halfway through. I will have to do some troubleshooting. Thanks for the reply!@TheCrawlspaceCraftsman

@scotthogan177 8 месяцев назад

Is the cutting super loud??

@TheCrawlspaceCraftsman 8 месяцев назад

So the 60w spindle is not very loud but if you add the Palm Router it’s much louder. I have a closed insulated workshop so you can barely hear it outside. I can’t speak to the 400w spindle (yet) 🤫🫢😉. stay tuned!!!

@Susannicoleart 3 месяца назад

Use a down cut blade.

@TheCrawlspaceCraftsman 3 месяца назад

Love me some down cut bits!

@omgthisnamewasfree2076 3 месяца назад

I was going to ask about this, I've just set my machine up, can't wait to start using it! Guessing this was done with an up cut bit?

@stevendavies98 Год назад

Seriously? 1/4 inch bit on that small spindle.. Lots fo chatter I would guess. Upgrade to the Makitka... Lot stronger, only thing is the weight and the flex.. 😉

@TheCrawlspaceCraftsman Год назад

Upgrading my FoxAlien Masuter Pro with a Harbor Freight Bauer Router! ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-gnZIx5YGIJc.html

@Justin-td4bb 9 месяцев назад

Hate to point out the obvious but double sided tape would be simpler

@TheCrawlspaceCraftsman 9 месяцев назад

They do make a double sided tape but it’s $17 roll! Don’t use carpet tape… leaves a nasty sticky residue. Thanks for watching!

@HyPex808-2 10 месяцев назад

man that thing looks a lot smaller that i thought it would

@TheCrawlspaceCraftsman 10 месяцев назад

The base has a 15.75”x15.75” cutting area. With extension kit it expands to 31”

@scottydntno Год назад

ATTENTION: it does NOT work like any other accelerator

@TheCrawlspaceCraftsman Год назад

I stand by my comment. Don’t waste your money on accelerator. Using alcohol helps evaporate h2o causing the super glue to dry faster than without. When CNCing we use a ton of tape and glue. It doesn’t make sense for one to by $12 for 2oz of glue. I’ll keep buying my $1.49 glue and surely keep recommending my process because it works… the video showed that. Thanks for watching!

@rsz90182 Год назад

Yea pay someone monthly money for free programs. 😅😅😂😂😂

@TheCrawlspaceCraftsman Год назад

I’m not a fan of the fee but there are some pretty cool upsides to the Pro version of Easel. Only my opinion.

@TheCrawlspaceCraftsman Год назад

I could think of worse ways to spend $25 bucks (and better) LoL

@Dark_Phoinix Год назад

AHAHHAAHAHAHH CNC WITH WELLS ? ONLY DUMPS ....

@TheCrawlspaceCraftsman Год назад

I have no clue what any of this means! 🤔

@Bodaduchee 10 месяцев назад

So I have to buy a computer? I run a cnc lathe for metal at work. I want to do it as a hobby at home but I have no idea what Im getting into. Any additional advice?? Please

@TheCrawlspaceCraftsman 10 месяцев назад

I would highly recommend a laptop but it doesn’t have to be expensive! Also Windows over Mac but I use Mac because I’m just so used to it!