Тёмный

ISO Arms DIY Jammer Lever Arms | Home Gym Power Rack Attachment 

Kaizen DIY Gym
Подписаться 79 тыс.
Просмотров 68 тыс.
50% 1

The written version: garagegymexperiment.com/2021/...
⏬ Materials ⏬
1 - 8ft 4x4 (homedepot.sjv.io/x9Z1a3)
1 - 1 x 6 board (homedepot.sjv.io/kjReqv)
8 - 6” long 1” steel pipe - Amazon link (amzn.to/3AQITqD), Home Depot link (homedepot.sjv.io/DV3kd5)
2 - 3” long 1” steel pipe - Amazon link (amzn.to/3kL9dgn), Home Depot link (homedepot.sjv.io/QObkMx)
2 - 45 degree 1” pipe fitting - Amazon link (amzn.to/39HmSyL), Home Depot link (homedepot.sjv.io/ORbg1n)
4 - 90 degree 1” fitting - Amazon link (amzn.to/3CNsnrS), Home Depot link (homedepot.sjv.io/DV3PLd)
6 - 1” floor flange - Amazon link (amzn.to/2UGkB2W), Home Depot link (homedepot.sjv.io/x9y4BA)
2 - 1” pipe cap - Amazon link (amzn.to/3BHBMl0), Home Depot link (homedepot.sjv.io/jWzoNe)
10 inch pneumatic swivel caster - Amazon link (amzn.to/39KfJxq), Home Depot link (homedepot.sjv.io/rnXZ2G)
16 - #12 screws 2 ½” long - Amazon link (amzn.to/3ufrCFa)
8 - #14 screws 1 ½” long - Amazon link (amzn.to/3kaPaHK)
1/4” bolts, 2 inch long with lock nuts and washers - Amazon link (amzn.to/3F26Y00)
6 inch long 1” bolts - Menards link (www.menards.com/main/hardware...)
1” hex nut - Menards link (www.menards.com/main/hardware...)
Early American wood stain - Home Depot link (homedepot.sjv.io/MXQJRn)
Black spray paint (amzn.to/34EKOzZ), Home Depot link (homedepot.sjv.io/2rKAJQ)
Time to build is about 60 to 90 minutes, cost is $120-$150, difficulty is medium
Tools:
Dewalt sliding mitre saw - Amazon link (amzn.to/3pdqFe3), Home Depot link (homedepot.sjv.io/3P7GRB)
Dewalt cordless drill - Amazon link (amzn.to/3g2VM7L), Home Depot link (homedepot.sjv.io/doRm3K)
Bosch cordless drill set - Amazon link (amzn.to/2TGLLpz)
Drill press - Amazon link (amzn.to/3wh8beK), Home Depot link (homedepot.sjv.io/doRm3K) - alternatively, the holes can also be drilled using a cordless drill
Dewalt random orbit sander - Amazon link (amzn.to/3vUK2Ku), Home Depot link (homedepot.sjv.io/gbo2L9)
1 inch forstner bit - Amazon link (amzn.to/3uJm44s), Home Depot link (homedepot.sjv.io/LPDQoZ)
5/8 inch forstner bit - Amazon link (amzn.to/2XXNWHq), Home Depot link (homedepot.sjv.io/kjWx3x)
1/4 inch drill bit - Amazon link (amzn.to/3z01Q9K), Home Depot link (homedepot.sjv.io/9WeXxy)
Socket adapter for drill - Amazon link (amzn.to/3A9qdlA)
7/16 socket - Amazon link (amzn.to/3EjwX2P)
Wood clamps - Amazon link (amzn.to/3xfySB8), Home Depot link (homedepot.sjv.io/jW1vD5)
Rafter square - Amazon link (amzn.to/3AZCqcs), Home Depot link (homedepot.sjv.io/KeZxdA)
Rubber mallet - Amazon link (amzn.to/3zPriho), Home Depot link (homedepot.sjv.io/b3VnJm)
⏬ Consider supporting Kaizen DIY Gym by purchasing from any of the following links ⏬
Rogue Fitness (www.kaizendiygym.com/links)
REP Fitness (repfitness.com/#61e7125884bf7)
Fringe Sport (shareasale.com/r.cfm?b=720665...)
Titan Fitness (titan-fitness.pxf.io/a1G6qM)
AbMat (abmat.com/#a_aid=kaizendiygym)
Raptor Fitness (www.coloradostrengthequipment...)
Bells of Steel (bellsofsteel.postaffiliatepro...)
Wall Control (www.wallcontrol.com?aff=140)
Plate Snacks (platesnacks.com?aff=36)
Bowflex (www.bowflex.com/default?irgwc...)
Nautilus & Schwinn (www.nautilus.com/default?adID...)
Amazon (www.amazon.com?&_encoding=UTF8&tag=7143506281-20&linkCode=ur2&linkId=41ca63fd5d4261a73bb1d9731360bb50&camp=1789&creative=9325)
Home Depot (homedepot.sjv.io/OR4R0A)
This video is not sponsored. Some of the links are affiliates which means if you purchase through the link, I’ll receive a small commission.
#kaizendiygym #diygymequipment #diyhomegym
0:00 Intro
0:22 Safety
0:45 How to build
5:14 The strength of casters
5:33 Attach to the front
6:08 Paint and stain
6:22 Exercise options
6:35 PhenoXfitness

Опубликовано:

 

21 июл 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 169   
@vincehpt1504
@vincehpt1504 2 года назад
This channel really deserves to be known.
@KaizenDIYGym
@KaizenDIYGym 2 года назад
Thank you! I'm working on it!
@KaizenDIYGym
@KaizenDIYGym 2 года назад
@@chjeltness great suggestion! I’ve been in touch with someone at GGR, they’re definitely aware of my content. I’m hoping they’ll want to collaborate sometime.
@rampartapramroop4052
@rampartapramroop4052 2 года назад
@@KaizenDIYGym ok
@GlucksGym
@GlucksGym 2 года назад
So you're saying a need a new 3x3 rack? Thanks that's all I needed to hear, no need to respond you've done enough.
@KaizenDIYGym
@KaizenDIYGym 2 года назад
Yes! You must have a 3x3, don't worry about any of that u-bolt stuff I mentioned for the 2x3 racks.
@T0tenkampf
@T0tenkampf 2 года назад
Lmao
@MisterManiac777
@MisterManiac777 2 года назад
Wow. Those are amazing. Full range of motion and simple enough that I know what all those parts are just by looking at it. Pure genius.
@KaizenDIYGym
@KaizenDIYGym 2 года назад
Hey, thanks so much! They’re still holding up great too
@Probusinessbasics
@Probusinessbasics 2 года назад
Just made this today based on your instructions! I am waiting for the swivel casters to come in so I made a small modification and put it on a heavy duty hinge mount so it only has single motion but will switch it out when the parts come in. Just couldn’t wait to get it implemented!
@KaizenDIYGym
@KaizenDIYGym 2 года назад
So cool! I’m happy to hear the instructions were easy to follow. If you’re on Instagram and would want to send a picture of your jammers arms when they’re done, I’ll post on my page. I love seeing this stuff.
@BRUTUSPLAC
@BRUTUSPLAC 2 года назад
SO did it turn out ? I found a 4 pack of 6 x6 at 38.5 " in storage , My wife saw me laughing and said whick project. ? I said after your HIP pad .
@Probusinessbasics
@Probusinessbasics 2 года назад
@@BRUTUSPLAC It turned out great! Just used it in my workout today for military press. At this point, I’m trying to make each of his projects come to life at my gym!
@BRUTUSPLAC
@BRUTUSPLAC 2 года назад
@@Probusinessbasics tues/ weds /thurs/ fri making as much as i can depending on what i find for supplies in storage, Good Luck !
@easywatching
@easywatching 2 года назад
This is absolutely brilliant content , from the build itself to the video to the instructions. Really cool guy
@KaizenDIYGym
@KaizenDIYGym 2 года назад
Thanks man, I appreciate the kind words. This stuff is so much fun. As long as people want to watch, I’ll keep making videos.
@savageroofing2761
@savageroofing2761 Год назад
I made my own jammer arms watching your videos. Thank you for all your informative content. 💪🏾
@KaizenDIYGym
@KaizenDIYGym Год назад
That is awesome! I’m glad you find value in my videos!
@darrenvictor2648
@darrenvictor2648 2 года назад
You are really making my life a lot easier!! Thanks for these vids!
@KaizenDIYGym
@KaizenDIYGym 2 года назад
You’re very welcome. Thanks for watching! I’ve got plenty of builds planned for the next year! I’d love to see what you make. Tag me on Instagram, or check out our Facebook group or Reddit group to post yours!
@davesjourney8406
@davesjourney8406 2 года назад
Well done! Links to everything too.. Very impressive.. Love the retro intro video too. Thanks so much!
@KaizenDIYGym
@KaizenDIYGym 2 года назад
Hey I'm glad you like it. The links take a lot of time to put together, I'm happy to know they're useful.
@MrTdawg75
@MrTdawg75 2 года назад
Just found this channel today. You, sir, are a genius. Thanks for these ideas and videos.
@KaizenDIYGym
@KaizenDIYGym 2 года назад
Thanks man! I really appreciate it. These videos are a lot of work and it makes me glad to know people enjoy them.
@MrTdawg75
@MrTdawg75 2 года назад
@@KaizenDIYGym no problem! I have some homemade gym equipment already and have been trying to come up with ideas for some of the exact pieces you've built. Problem solved! I'll be adding your ideas to my gym asap.
@jandusek3653
@jandusek3653 2 года назад
NICE JOB!!
@ShreddedDad
@ShreddedDad 2 года назад
The DIY king 👑 . Awesome build 👏
@KaizenDIYGym
@KaizenDIYGym 2 года назад
Thank you! It means a lot coming from the king of shredded dads!
@ShreddedDad
@ShreddedDad 2 года назад
@@KaizenDIYGym haha, can’t wait to see the next build.
@MrLevarblack
@MrLevarblack 2 года назад
Great as always
@KaizenDIYGym
@KaizenDIYGym 2 года назад
I appreciate the support, thanks for coming back!
@dantran671
@dantran671 2 года назад
Can’t wait for the next video
@KaizenDIYGym
@KaizenDIYGym 2 года назад
Thanks man! I’ve got a few projects in the works fright now. I’m not sure which one will be done first but I should have something posted within the next week.
@benjwebcke
@benjwebcke 2 года назад
This is sick as you are the man
@KaizenDIYGym
@KaizenDIYGym 2 года назад
Thank you so much!
@MacStrengthCo
@MacStrengthCo 2 года назад
Nice work on those man!!
@KaizenDIYGym
@KaizenDIYGym 2 года назад
Thank you so much! They’re super fun to have in the gym
@juanto303
@juanto303 2 года назад
Heard about you on Reddit. I’m hooked on your videos!
@KaizenDIYGym
@KaizenDIYGym 2 года назад
Thanks bro! As long as people are watching, I’ll keep making these videos!
@markhalden3922
@markhalden3922 2 года назад
Another great idea! So many things I want to build but I don't have the space for.
@KaizenDIYGym
@KaizenDIYGym 2 года назад
Dude, I know the feeling! I actually have an off camera space in my basement that’s just a pile of these projects when I’m not using them. It’s getting pretty big.
@christiansather974
@christiansather974 2 года назад
The home gym content RU-vid needs! Love it bud!
@KaizenDIYGym
@KaizenDIYGym 2 года назад
Thanks man! I love making these videos and I get so stoked to hear how much people appreciate the content. I’ll keep making these tutorials as long as there is an audience.
@christiansather974
@christiansather974 2 года назад
@@KaizenDIYGym awesome man! I make a lot of my own equipment because I work at a steel service center. Giving me some great ideas!
@KaizenDIYGym
@KaizenDIYGym 2 года назад
@@christiansather974 that’s so cool. I definitely have welding on my learning to-do list
@danny60473
@danny60473 2 года назад
Your the man!!!!
@KaizenDIYGym
@KaizenDIYGym 2 года назад
Thank you! I'm just doing my part to help this community grow!
@marko-182
@marko-182 Год назад
This is next level fitness at home. Tnx bro 💪
@Whamkeepit
@Whamkeepit 2 года назад
Yeah buddy nicely done
@KaizenDIYGym
@KaizenDIYGym 2 года назад
Thank you for always watching and supporting!
@samreyes7772
@samreyes7772 2 года назад
Made it works nicely very good build ..
@KaizenDIYGym
@KaizenDIYGym 2 года назад
That's awesome!
@juanpadilla3203
@juanpadilla3203 Год назад
This is great 👍
@KaizenDIYGym
@KaizenDIYGym Год назад
Awesome, thanks so much!
@875daily
@875daily 2 года назад
Wish i had all these tools. Great video 👍👍
@KaizenDIYGym
@KaizenDIYGym 2 года назад
It has taken years to collect all the tools I have. Slow and steady
@killianredrusty2
@killianredrusty2 2 года назад
This is amazing. Thank you.
@KaizenDIYGym
@KaizenDIYGym 2 года назад
Hey, that’s awesome to hear, thank you!
@killianredrusty2
@killianredrusty2 2 года назад
@@KaizenDIYGym I've been looking for a long time for a decent DIY jammer arms and I always found ones made out of steel which doesn't work for most people. So I am extremely excited about your design which I will be building this weekend. I will make sure to tag you on Instagram. Keep up the great work!
@andrerossi5010
@andrerossi5010 6 месяцев назад
Very good.
@KaizenDIYGym
@KaizenDIYGym 6 месяцев назад
Thank you!
@nchatzoglou
@nchatzoglou 2 года назад
By the way, it s awesome. Good work thank you
@KaizenDIYGym
@KaizenDIYGym 2 года назад
Thank you too!
@xoxtank
@xoxtank Год назад
TY for finding the 1in D bolts so hard to find.
@KaizenDIYGym
@KaizenDIYGym Год назад
Heck yeah!
@northeastcorals
@northeastcorals Год назад
Nice job
@KaizenDIYGym
@KaizenDIYGym Год назад
Thanks so much!
@chrisdonnell2575
@chrisdonnell2575 3 месяца назад
Ever thought about building Lever Arms that attach and detach easily using a 5/8" pin and the hitch pins? That way we can put up and take down easily and those of us with cable systems on rack can also use lever arms! I see Gorilla Jammer Arms does this and saw another company that sells adapters to make any jammers do this.
@richardristau7685
@richardristau7685 2 года назад
Du bist eine Maschine, das bau ich mir nach
@Grill.N.Chillz
@Grill.N.Chillz 2 года назад
Haha these are sick !
@KaizenDIYGym
@KaizenDIYGym 2 года назад
Awesome, thank you so much!
@squealer42
@squealer42 2 года назад
I should totally do this. When I ultimately finish with a colossal disaster, at least I'll have some cool power tools.
@KaizenDIYGym
@KaizenDIYGym 2 года назад
it'll be fun no matter how it turns out and you'll have tools for more disastrous projects!
@jandusek3653
@jandusek3653 2 года назад
wow a great job really.I need just get anywhere the wheels frame 😀 then I will do chest press..
@KaizenDIYGym
@KaizenDIYGym 2 года назад
I’d love to see how yours turns out!
@SnakeLegacy10
@SnakeLegacy10 2 года назад
Thought about making it so I can do calf raises as well with the arms on my shoulders
@KaizenDIYGym
@KaizenDIYGym 2 года назад
The more purposes the better!
@successfulusername
@successfulusername Год назад
Would you recommend this build over your fly/lateral raise build? This seems more versatile.
@andremoura490
@andremoura490 2 года назад
tks for the great content man. how does the lateral raise feel? how does it compare to ur lateral raise machine?
@KaizenDIYGym
@KaizenDIYGym 2 года назад
I’m glad you enjoy the content. The lateral raise feels great. It is different from the dedicated machine, the movement is angled rather than being up and down, but I like to do them both on shoulder day.
@bigdogkropp
@bigdogkropp Год назад
I would like to see jammer arms that have the ability to adjust the length of the arms. Maybe you could slide a slightly smaller metal tube inside the main tube. Some exercises work better with longer radius arce.
@KaizenDIYGym
@KaizenDIYGym Год назад
That’s true! I agree it would be a great feature
@thomasreinbold4961
@thomasreinbold4961 2 года назад
Just perfect ! Better than rogue ;)
@KaizenDIYGym
@KaizenDIYGym 2 года назад
Aww thanks! Hopefully they’ll be calling to collaborate
@matwinner9708
@matwinner9708 Год назад
I’m thinking of using trailer hitch attachments instead of casters for increased strength of the setup. Just like shoulder bones.
@KaizenDIYGym
@KaizenDIYGym Год назад
I’d love to know how that works! Keep me posted
@matwinner9708
@matwinner9708 Год назад
@@KaizenDIYGym you bet!
@brianmarchesani7646
@brianmarchesani7646 2 года назад
How about a thigh pad to hold you down while doing lat pulldowns on a functional trainer?
@KaizenDIYGym
@KaizenDIYGym 2 года назад
I have heard that request before, I’ll add it to the tally. I’ll definitely do it but it may be a couple months. My list is crazy long!
@nicholasmackanick
@nicholasmackanick 2 года назад
Could you do this same concept with something like the titan t3 short squat stand even though it is not a rack?
@KaizenDIYGym
@KaizenDIYGym 2 года назад
It’s definitely possible, you’d need to make a few adjustments. I’d definitely bolt the rack down.
@warmachinebodybuilding
@warmachinebodybuilding 2 года назад
Genial, excellent job and video bro. Compliment and like by Warmachine bodybuilding of garage Gym italy 🇮🇹💪😉👍✌️
@KaizenDIYGym
@KaizenDIYGym 2 года назад
Thank you so much Warmachine!
@BaldOmniMan
@BaldOmniMan 2 года назад
Galaxy brain
@KaizenDIYGym
@KaizenDIYGym 2 года назад
Hell yeah!
@Avefenixfuego8
@Avefenixfuego8 2 года назад
Awesome!!! Thanks. Do you think is support in half rack too?
@KaizenDIYGym
@KaizenDIYGym 2 года назад
Hi, thanks for watching! Yes, it will also work in a half rack. Check out this post to see how it looks instagram.com/s/aGlnaGxpZ2h0OjE3OTIwMzYxOTIzNjU1MzQ5?story_media_id=2675623233054649348&
@Avefenixfuego8
@Avefenixfuego8 2 года назад
@@KaizenDIYGym Excellent, Now I have one important mission 😂. Thanks buddy.
@HenryLeib
@HenryLeib Год назад
Not sure how well these would hold.up for me. I have a 315 overhead press and a 500lb bench!
@KaizenDIYGym
@KaizenDIYGym Год назад
Ok cool. Congrats
@tampajep
@tampajep Год назад
Hi. PHENOXFITNSS attaches their Jammer Artms to a cross-bar at the top front of the cage. That's how I need to attach mine as my cage has pulleys on each front vertical bar for cable cross-overs. Will the casters work if I mount them on a 2x4 crossbar at the top of my cage? Thanks for your videos. I really appreciate that you included a parts list. I've subscribed to your channel. I have an ER KANG JD-7K5 rack.
@KaizenDIYGym
@KaizenDIYGym Год назад
Thanks for the sub! I don’t know how well casters hold up to the stress of being used upside down.
@nchatzoglou
@nchatzoglou 2 года назад
What I would really want to see is a diy wooden crossover attachment
@KaizenDIYGym
@KaizenDIYGym 2 года назад
That would definitely be a challenge! I'll add it to my list
@thndastruk
@thndastruk 2 года назад
1. Is there a way in your mind to be able to switch between fixed arm path and free arm path 2. Isn't the freely rotating arm path on these a lot like using free weights as opposed to a machine?
@KaizenDIYGym
@KaizenDIYGym 2 года назад
There should be a way to make these lock into a fixed plane. I’ve been considering it for a while but haven’t had the time to test anything out. The movement is not quite like free weights but definitely more so than using a machine. I’d say it’s a hybrid.
@thndastruk
@thndastruk 2 года назад
@@KaizenDIYGym when you figure out the fixed path mod, inquiring minds would love to know!! I wonder if you found a way to mount them vertically it might be easier to find a mod to fix the caster in place to only spin forward and back - would make it a bit more similar to Phenox Fitness model
@JB-po3rb
@JB-po3rb Год назад
👍👍👍👍👍👍
@KaizenDIYGym
@KaizenDIYGym Год назад
awesome, thanks!
@docyak
@docyak 2 года назад
I don't have side holes, Can I attach it to the front by using non-swivel casters instead? It would only operate in a single plane of motion.
@KaizenDIYGym
@KaizenDIYGym 2 года назад
You have some options. You could drill holes into the sides. This can be done with a corded or cordless drill and drill bit. If you don’t want to do that, you can use non-swivel casters but that will restrict movement to a single plane of motion. Swivel casters mounted to the front will work for everything but overhead movements.
@JeremyThielman
@JeremyThielman 2 года назад
Pretty easy with pillow blocks at least 5/8 steel rod thru the blocks and the wood. Still use a 2x6 against frame but probably need to push pillow blocks out a few inches for clearance of the 4x4. So use the 2x6 to cut off 2 blocks 2” for the pillow bocks to rest on. Use 3 or 3.5 in construction screws to attach blocks to main 2x6 (3 each side with pilot holes, but watch where you have to bore holes for the pillow bocks. The 5/8 steel bar and pillow blocks can be found on amazon. I’d use an angle grinder to cut bar to proper length. Those are cheap enough. Or Titan has the brackets for ~$100 and you can bore some 5/8 hoes in your rack with a drill and metal step bit.
@tawaitai
@tawaitai 2 года назад
How would you apply this if you don't have a power rack? I was searching for a DIY Viking Press but this is kinda the same concept only difference is it's not a fixed bar but Unilateral.
@KaizenDIYGym
@KaizenDIYGym 2 года назад
They could be affixed to a wall, maybe with the 2x6’s attached to wall studs. I’d have to mess around with the idea for a bit to figure it out.
@tawaitai
@tawaitai 2 года назад
@@KaizenDIYGym that is an awesome idea, the usual viking-press is usually table or platform mounted but your idea of a 2x6 wall-mount is much better!
@derrik5329
@derrik5329 Год назад
Curious if you've tested weight capacity of the castors over time?
@KaizenDIYGym
@KaizenDIYGym Год назад
That’s a great question. I have not tested the weight capacity of the casters but that’s a great video idea!
@ytbengpf
@ytbengpf 11 месяцев назад
What's the benefit of those compared to diy functional trainer?
@emazing25
@emazing25 2 года назад
Any tips of how to modify it if you have front facing holes on 2x2 rack so it mounts on the inside of the racks? Thanks.
@KaizenDIYGym
@KaizenDIYGym 2 года назад
Find me on instagram and I’ll show you the modification I’ve seen.
@emazing25
@emazing25 2 года назад
@@KaizenDIYGym will do
@dashriprock5720
@dashriprock5720 2 года назад
Would it be better to have the pipe handles go through the would and screw into the flange on the other side?
@KaizenDIYGym
@KaizenDIYGym 2 года назад
I don’t know if it would be better but it is an option.
@dashriprock5720
@dashriprock5720 2 года назад
@@KaizenDIYGym The pipe would be captured and the weight supported through the would rather than just relying on the screws not to tear out so it would definitely be better. I guess my question was rhetorical.
@JeremyThielman
@JeremyThielman 2 года назад
Don’t think floor flanges work with threading it backwards. 3/4 floor flange for ~1 in grip uses 3/8 holes. Some 3/8 hex bolts at 4” will be stronger than screws.
@SnakeLegacy10
@SnakeLegacy10 2 года назад
Bro such a sick idea I made your leg press into a combination chest press arms but dual swivel points !!! Bro now I’m back to modifying keep up the good work man
@KaizenDIYGym
@KaizenDIYGym 2 года назад
Wow, that is amazing, I’d love to see it
@werojon
@werojon 2 года назад
I never see a power rack with 1" holes... You did it or bought it?
@KaizenDIYGym
@KaizenDIYGym 2 года назад
I bought it. It’s an Ethos power rack from Dick’s Sporting Goods. Before this one I had a Body Solid rack that was 3x3 with 1” holes. I know that REP’s PR5000 line is all 3x3 with 1” as well. Maybe not as common as Westside spacing but it’s out there.
@godwinbssdd
@godwinbssdd 2 года назад
Idk why but all I could think about was the Plumbus commercial on Rick and Morty lol
@KaizenDIYGym
@KaizenDIYGym 2 года назад
I’ll have to look that up
@carlosverrier1988
@carlosverrier1988 2 года назад
When will some Smith Machine DIY in the squat rack?
@KaizenDIYGym
@KaizenDIYGym 2 года назад
My next big build is a power rack. A smith would be pretty difficult but I could probably figure it out.
@JeremyThielman
@JeremyThielman 2 года назад
There’s a guy on RU-vid with a Etsy page that will fabricate one for you. Richmond custom I think. Steel guide rods, brackets, linear bearings, housing with angle iron, pillow blocks and hooks is all one needs.
@silasgroenning
@silasgroenning Год назад
Hello kaizen gym. Ive been inspired in my own home gym, by some of your ideas, and thank you for both willingness and contribution. I have a request for a diy project. Theres a workout piece of equipment made for rotational exercises, that are hard to i itate with just handles and a cable machine, since to much force is lost if the arms are stretched like with a cable, and not everyone can afford nor have space to a fitness machine like the torso rotater machine. So a company called pure torque made this piece of equipment called the : puretorque ab trainer. Prrhaps you would find it relevant put it into a diy project. Thanks ✌️
@KaizenDIYGym
@KaizenDIYGym Год назад
That’s interesting. I’m sure there is a way to DIY it. I’ll add it to my list.
@MrMazaAzam
@MrMazaAzam 2 года назад
how have the castors held up so far?
@KaizenDIYGym
@KaizenDIYGym 2 года назад
No issues at all! I’ve been using them regularly and never put more than 45 pounds on them. I posted a short recently showing how to increase the resistance, that’s been great. I’ve also been using them with bands.
@zelder12
@zelder12 2 года назад
Cant find those floor flanges in Ireland for love nor money
@KaizenDIYGym
@KaizenDIYGym 2 года назад
I am sorry, I wish I could help. There's got to be an alternative
@JeremyThielman
@JeremyThielman 2 года назад
3/4 iron pipe has an OD of 1.06” If you metric then there are pipe charts online. Or a metal yard for solid steel rods then bore through the 4x4 and lock in the rod with metal collars with set screws that can be found on amazon.
@user-xu5tz2fh3z
@user-xu5tz2fh3z 5 месяцев назад
What size casters did you use ,
@KaizenDIYGym
@KaizenDIYGym 5 месяцев назад
I posted this video a couple years ago. I don’t remember but I’m pretty sure I added links to all of the materials in the description of the video.
@Alaskanxeotheze
@Alaskanxeotheze Год назад
How do I set up my T Bar?
@KaizenDIYGym
@KaizenDIYGym Год назад
Great question. I’m not sure what your set up looks like so it’s hard to give you that advice.
@Leightontipping
@Leightontipping 23 дня назад
Please make me some for my force usa G15 👍. Other than paying £899 to have them included in a package... i cant buy them anywhere lol. Issue is, the holes are 16mm and the frame is 50mm. Most if not all i see are for 1 inch holes... so a nightmare to find one for my rack/machine.
@KaizenDIYGym
@KaizenDIYGym 14 дней назад
I'd suggest getting a hold of Ben at GymPin. If anyone can do it, he can. hello@gym-pin.co.uk
@bsmdiamant
@bsmdiamant Год назад
hello what type of wood is it?
@KaizenDIYGym
@KaizenDIYGym Год назад
Pine
@bsmdiamant
@bsmdiamant Год назад
@@KaizenDIYGym thank you be bless
@estebanlandrauserrano5106
@estebanlandrauserrano5106 2 года назад
do you work for sale?
@KaizenDIYGym
@KaizenDIYGym 2 года назад
Hi there, right now I am not selling any of this stuff. I’m staying super busy making these tutorials.
@tawaitai
@tawaitai 2 года назад
If you sprayed the Jammer Arms black you wouldn't think it's wood!
@KaizenDIYGym
@KaizenDIYGym 2 года назад
I thought about that. I’m working on building a power rack and I want these to match.
@calvinsmith696
@calvinsmith696 11 месяцев назад
I'm surprised with some of the negative reviews. I was so impressed with the ru-vid.comUgkxMwYg0MOXR4M-oGeyBsNSYe1aPOUoRH6D cage that I got the lat pulldown attachment that goes with it. It is equally outstanding. I don't have one complaint other than putting it together is a job. The instructions and packaging of the parts are very well designed and organized. Also, I stripped and damaged the pull down cable the first day, admitting it was my stupid fault, and they quickly replaced it at no charge. I'm 6'5, 280lbs and fit in the cage just fine. Glenn B
@KaizenDIYGym
@KaizenDIYGym 11 месяцев назад
Safety spotters or a person as a spotter
@wilsonli7724
@wilsonli7724 2 года назад
You should patent this. Don’t let the big companies copy this idea. Please
@KaizenDIYGym
@KaizenDIYGym 2 года назад
I did. I filed a provisional patent application before posting this video. After releasing this video I contacted a company to see if they’d be interested in making them. I can’t divulge details any further. Good looking out bro!
@neiloppa2620
@neiloppa2620 Год назад
@@KaizenDIYGym Bro, I'm really excited for you! That's awesome!
@christiancavanagh6231
@christiancavanagh6231 10 месяцев назад
The list shows 1X6 board, but the actual video shows 2X6??
@KaizenDIYGym
@KaizenDIYGym 10 месяцев назад
It’s probably a typo
@KaizenDIYGym
@KaizenDIYGym 10 месяцев назад
It’s probably a typo
@rampartapramroop4052
@rampartapramroop4052 2 года назад
make a shoot gun
@dimon6294
@dimon6294 5 месяцев назад
Mr. Tree, learn how to work with metal
@KaizenDIYGym
@KaizenDIYGym 5 месяцев назад
👍
Далее
DIY leg press machine, rack attached leg press
5:00
Просмотров 111 тыс.
DIY lever belt squat and seated calf raise!
8:02
Просмотров 25 тыс.
DIY Power Rack Attachments using VEVOR Bench Grinder
7:57
How to Build a HOME POWER RACK - DIY Dudes
22:24
Просмотров 2 млн
Are Lever Arms Worth it in a Home Gym?
8:00
Просмотров 9 тыс.