JBugs - 1963 VW Beetle - Clutch & Accelerator Cable Replacement

Подписаться 41 тыс.

Просмотров 115 тыс.

50% 1

View our complete selection of air-cooled VW parts on the JBugs website: www.jbugs.com/
If you've ever had the clutch or accelerator cable snap, now you'll know to replace them! Follow along as we walk you through how to replace the cables that attach to the pedal assembly. This is a great project to do whenever your pedal assembly is removed.
Intro 0:00
Pedal Assembly Removal: 0:56
Accelerator and Clutch Cable Removal: 1:30
Clutch Cable Tube Replacement: 1:42
Clutch Cable Installation: 2:02
Pedal Removal: 2:44
Heavy Duty Accelerator Cable Installation: 2:52
Pedal Assembly Installation: 3:49
Brake Pedal Push Rods Installation: 4:51
-------------------------------------------------------------
Tools used in this video:
11mm Wrench
14mm Wrench
Vice Grips
3/8" Ratchet
6" Ratchet
17mm Socket
Hammer
Chisel
Utility Knife
Flathead Screwdriver
Angle Grinder With Cut-Off Disc
-------------------------------------------------------------
The parts used in this video are:
VW Throttle Cable (4860-7)
www.jbugs.com/product/4860-7.html
VW Clutch Cable (113721335A)
www.jbugs.com/product/11372133...
VW Clutch Cable Wing Nut (131721349)
www.jbugs.com/product/13172134...
VW Clutch Tube Boot (113-293D)
www.jbugs.com/product/113-293D...
VW Clutch Cable Tube (311721361)
www.jbugs.com/product/31172136...
VW Clutch Tube Seal (211-365A)
www.jbugs.com/product/211-365A...
All parts used in this video are available at: www.jbugs.com/
-------------------------------------------------------------
Follow us on our social media accounts!
Instagram - / jbugs_california_pacific
Facebook - / jbugsvwparts
Twitter - / jbugsvwparts
-------------------------------------------------------------
Videos are intended for entertainment purposes. Factory specifications should be followed when performing any task on your vehicle.

Авто/Мото

Опубликовано:

14 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 29

@arifdarmawansetiyadi5842 2 месяца назад

Thankyou for the Vedio Bro

@Sam_Mebane 2 месяца назад

Our pleasure!

@jasonbice4815 Год назад

Great video, I just ordered a clutch cable and new gas pedal from you guys

@haroldsteptoe6402 6 лет назад

such useful information ! your video really helped me through the process of changing my clutch cable .. cheers guys

@Weightlossjourney24 4 года назад

Thank you for these videos I’m working on a SandRail

@SteveBlack-kj3pm 9 месяцев назад

Exelente video. solo falto engrasar los cables ??

@Sam_Mebane 9 месяцев назад

Si ves que el cable viejo salió con mucha grasa, entonces no necesitarás agregar grasa. De lo contrario, todo lo que se necesita es una capa ligera.

@gravityTattdrumr11 2 года назад

What type of grease is used for the brake pedal push rod and such? Great video! Very helpful on my 61

@Sam_Mebane 2 года назад

Any grease would work, we happen to have some CV joint grease handy so it's our go to lately.

@Its_about_that_time Месяц назад

Does rhe accelerator cable tube need to be attached to anything or does it just hang there

@Sam_Mebane 28 дней назад

It just "hangs" there, when it is run through the fan shroud tube, it sits between it and the chassis.

@fayjason 5 лет назад

Ive got a dunebuggy that’s shortened 3 inches. Could you make a video on how to install a cable shortening kit . Thank you

@JBugsVWParts 5 лет назад

When we get the right project car, absolutely. In the meantime, the cable shortening kits are pretty simple to install. With the exception of the clutch cable kit, the cable ends are cut off and a new end is slid over the cable and held in place with a set screw. For the clutch cable, the end is cut off, the cable is routed through the new end and a nut is threaded down to hold the cable in place.

@fayjason 5 лет назад

Hey that you Jbug

@gsxr419 2 года назад

I'm experiencing a hard shudder in reverse on any grade. Could that be a bowden tube adjustment?

@Sam_Mebane 2 года назад

It could be, but if it is only in reverse, I would first check the cable adjustment and go from there.

@gsxr419 2 года назад

@@Sam_Mebane Front trans mount is toast everything is coming and and getting refreshed. Thanks for your reply.

@arielshtern4125 2 года назад

Is removing the engine really necessary?

@Sam_Mebane 2 года назад

No, not at all.

@TylerHarney 5 лет назад

Is there something holding the clutch cable tube to the chassis clutch tube? I can't seem to disconnect mine.

@JBugsVWParts 5 лет назад

There is no mechanical part holding the tube in place other than the bracket at the transmission. Once the bracket is removed, gravity, tension, grease, dirt, road grime, rust, etc. are the only things holding the tube in place. A good tug is usually required to break the tube free of the chassis.

@johncollins5552 Год назад

@@JBugsVWParts Never seen rear disc brakes on a bug before, fancy pants, factory never did those afaik!

@Manny2jz 4 года назад

My clutch pedal falls to the ground and doesn’t return after I replaced my cable

@Sam_Mebane 3 года назад

If the cable is attached to the arm on the transmission, then chances are the cross shaft arms inside the bellhousing have broken off. That, and the spring on the cross shaft is broken.

@1catbrains 11 месяцев назад

Pedal stop plate

@Devin_Stromgren 6 лет назад

What exactly is the point of that roller accelerator pedal?

@JBugsVWParts 6 лет назад

In 1957 and older Beetles, the roller pedal was stock. Some people like the vintage look and simplicity of the design. Others like the smooth, albeit odd operation compared to the metal pedal. Either way, it just comes down to personal preference.

@Devin_Stromgren 6 лет назад

Thanks, although since I asked I had found most of that out on my own. Since you are answering questions, what is the part number on your website for that heavy duty accelerator cable?

@JBugsVWParts 6 лет назад

All the parts we used in the video can be found in the video description, although it looks like we missed that one. The heavy duty accelerator cable we used for this installation can be found here: www.jbugs.com/product/4860-7.html