No video :(

Jeep Dana 30 Pinion install getting ready for the ring gear.

Подписаться 40 тыс.

Просмотров 9 тыс.

50% 1

My 1991 Jeep Wrangler is getting a new Ring and Pinion in the front Dana 35. There is also a Spartan Locker installed and later installing a Posi-Lock. This is going to be a front axle build series that you should really check out.
Parts and tools used in this Video:
Inch Pound Torque Wrench: amzn.to/3tlw7S8
250 lbs Torque Wrench: amzn.to/3tlw7S8
Press: amzn.to/46EJX0u
Harmonic Balancer Puller: amzn.to/3ZQqess
Yoke Tool: amzn.to/3ZKDK0D
Yukon Dana 35 Rebuild Kit: amzn.to/3rEaUSS
Yukon 3.73 Ring and Pinion: amzn.to/3ZKDK0D
Yukon 3.73 and up carrier: amzn.to/3Q5YhJV
Dana 30/44 U-Bolt Yoke: amzn.to/3tmwPi4
Dana 30 1310 U-Bolts: amzn.to/3tmVl2F
Dial Calipers to measure shims: amzn.to/48IZa2f
Dial indicator with magnetic base to measure backlash: amzn.to/45oCBgf
Digital indicator for back lash: amzn.to/3RS8lY9
If Power Addicts has ever helped you and you wanna contribute in some way, here are some links that can help make that happen. This here is an Amazon link that gives Power Addicts a small commission. Using this link costs you NOTHING more. amzn.to/39XSTTO
The Paypal link is a simple way to make a simple donation if you want. Thank you for hanging out!! www.paypal.com... Thank you very much!! Have a great day!!
Fix Jeeps website: www.fixjeeps.com/
RU-vid Home Page - / poweraddicts
Free Amazon Prime Trial (affiliate) - amzn.to/2nknmBE
Equipment used to create videos:
Canon Rebel EOS SL1: amzn.to/2q7AEDf
Canon EF-S 18-55mm f/3.5-5.6 Lens: amzn.to/2q7tb74
Sony ActionCam AS30: amzn.to/2pm7x1v
Sony HandyCam HDRPJ440: amzn.to/2pB0aQ6
ION Air Pro: amzn.to/2qtyQXY
Various Camera Tripods: amzn.to/2r3OjLh
Dell Latitude E7450 Laptop: amzn.to/2r23rYV
$ave Money! : • Save money on Jeep par...
Power Addicts Playlists
Jeep fix & Repairs - • Jeep fix and repairs.
Jeep Sensors - • Jeep Sensors
Jeep YJ mods - • Jeep YJ mods
Wrangler YJ Maintenance - • Wrangler YJ Maintenance
Jeep Fun - • Jeep Fun -
Wrangler YJ Drive shaft repairs - • Wrangler YJ Drive shaf...
Tools, mods & Creations - • Tools, mods and creations
Automotive Tool Tips - • Automotive Tool Tips
Motorcycle Playlist - • Motorcycle Playlist
Mustang GT - • Playlist
#jeepyj #yj #jeeplife #poweraddictscrew #jeepwrangler #poweraddictsyoutube #jeepwrangleryj #jeepwranglertj

Опубликовано:

6 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 17

@Poweraddicts 11 месяцев назад

Parts and tools used in this Video: Inch Pound Torque Wrench: amzn.to/3tlw7S8 250 lbs Torque Wrench: amzn.to/3tlw7S8 Press: amzn.to/46EJX0u Harmonic Balancer Puller: amzn.to/3ZQqess Yoke Tool: amzn.to/3ZKDK0D Yukon Dana 35 Rebuild Kit: amzn.to/3rEaUSS Yukon 3.73 Ring and Pinion: amzn.to/3ZKDK0D Yukon 3.73 and up carrier: amzn.to/3Q5YhJV Dana 30/44 U-Bolt Yoke: amzn.to/3tmwPi4 Dana 30 1310 U-Bolts: amzn.to/3tmVl2F The use of these links pays Power Addicts a small commission at no extra cost to you. Thank you for your support!

@GenX_-um2ct Месяц назад

Sing us a song your the mechanic man!

@jima4656 8 дней назад

You can pop the plastic lens off the dial calipers & clean the rust stains off with vinegar then put it back on or just leave it off

@Poweraddicts День назад

I've picked at it a few times to try getting it off. I finally just decided to deal with it. I can read it pretty much ok as long as the lighting is good. I may try again soon to see if I get lucky. Thanks for the tip!!

@ThatGuyFromArizona 2 месяца назад

Well done sir

@Poweraddicts 2 месяца назад

Thanks! Glad you enjoyed it. Hope it helps!!

@samODBkey 8 месяцев назад

working on my axle right now. This really helped me and probly saved my ass thanks

@Poweraddicts 8 месяцев назад

You are welcome! Glad the video helped you!

@singblade 5 месяцев назад

The bearing separator has a ball bearing in the end of the shaft that's supposed to act the same. It works until the end of it gets messed up

@Poweraddicts 5 месяцев назад

I agree, it is supposed to have that little bearing. Apparently it's missing in action on mine. Thanks for checking out the video! Have a great day!

@djddejong Месяц назад

Where are you at, I need to change my pinion bearings. And I am not confident enough, I’m near Crossville. I have a 2001 Jeep WJ 4.7 Quadra drive. Front differential is not good. I have taken the drive shaft out to hopefully not cause more damage. Do you know what it would cost for me to have it done, and who…. Thanks your video was very informative, but a little more than I can do, but would love to learn with someone who knows what they are doing.

@brandondunham8040 Месяц назад

I’m working on a LP Dana 30 for my 2000 xj with a crush sleeve. Setting preload similar process? Upon removal of my old races and bearings. The only shims were on the carrier bearings.

@Poweraddicts Месяц назад

Crush sleeve is a different set up. I don't have a video on that one.

@erichughes9098 11 месяцев назад

Thank you for tutorial 😎👍

@Poweraddicts 11 месяцев назад

You are welcome. Hope it helps.

@davidsmith2394 11 месяцев назад

At 15:30, what torque did you tighten the pinion nut to?

@Poweraddicts 11 месяцев назад

As I said in the video I just gave it a good hard snug. If the pinion pre-load is close then I'll tighten it closer to spec. In this case, the pinion pre-load was too tight with just a "hard snug" if I had tightened it down to spec the pinion may not have turned at all or even possibly damaged the bearing or race. So, in short, don't worry about the actual pinion nut torque spec until the pinion bearing preload is close. Once it is close then start torquing it down to spec to check the preload.