Тёмный

Jeep Gladiator Axle Mods For 39s! 5.13 Gears, Axle Truss And Brake Upgrades. 

Dirt Lifestyle
Подписаться 367 тыс.
Просмотров 77 тыс.
50% 1

Let's knock out a couple of the most important Jeep Gladiator Mods! 5.13 Yukon ring and pinions, axle trusses and even some super easy brake upgrades!
Here is a video on how to select your own ring and pinion ratios.
• Choosing The BEST Axle...
Don't listen to randoms dudes on the internet that will tell you what gear ratios to run (That includes me). Learn how to choose these ratios for yourself with the calculator I use in the video Linked above.
For me, this was a no brainer. I started by calculating my RPM with the stock tire size and ring and pinion ratio at 70mph (normal HWY speed). Then I consider what the added demand is on the truck after all of my other mods. 39" tires, heavy bumpers and a ton of gear. This will require more power to the wheels to get the same performance as stock, so I increase the RPM to meet the demand and make it easier for the engine to turn the tires with deeper gears. I will also be towing a trailer, so this calls for even deeper gears. The higher the numerical value, the more power is transferred to the wheels and the higher the RPM of the engine. Engines need fuel to make power and they need air to digest this fuel. More RPM makes the engine burn more fuel more efficiently (within peak efficiency range) and the increase in RPM spins my water pump faster giving my truck a better ability to cool when under a load. Since these mods, when I'm driving around town my MPG has gone up but, on the HWY, it has stayed the same when empty. BUT is definitely higher when towing.
In stock form the gladiator was at 1781rpm at 70mph with a 3.73 and a 33.
With 39's and a 5.13 I'm at 2073 rpm at 70 and driving the truck feels almost effortless. It requires barely any throttle to get up to speed and is an absolute pleasure to drive!
It's only 292 RPM higher than stock and what a difference in performance!
But don't take my word for it, learn how to calculate this stuff yourself and how to choose the best gear ratio for YOUR 4x4.
I hope this video helps and I hope you enjoyed it!
Save upto 20% with coupon code "dirtlifestyle" at Northridge 4x4!
Here are the brake upgrades from Power Stop 👊
www.powerstop.com/product/pow...
Axle truss kit
www.barnes4wd.com/Jeep-JT-Axl...
BARNES 4WD COUPON CODE: "dirtlifestyle" 10% off
AMAZON ITEMS!!! www.amazon.com/shop/dirtlifes...
(Amazon Affiliate Links)
NORTH RIDGE 4X4 CODE: "dirtlifestyle" up to 20% off www.northridge4x4.com
EMPIRE ABRASIVE CODE: "dirtlifestyle" 10% off lddy.no/qf79
YANKUM ROPES CODE: "dirtlifestyle" bit.ly/yankumDL
ONX MAPS: webmap.onxmaps.com/account-pu...
MIDLAND RADIOS: bit.ly/2IjmlZD
STEP 22:
EVOLUTION POWER TOOLS CODE: "dirtlifestyle" store.evolutionpowertools.com/
JOOLCA HOT WATER HEATER: bit.ly/37qLgEp
Shirts & Hats on our website!!
www.thedirtlifestyle.com
Support us on Patreon! / dirtlifestyle
Follow me on social media!!
Instagram: / dirtlifestylenate
Facebook: / dirtlifestylenate
DiRTBAG MAFIA Facebook Group
groups/34277...
DISCLAIMER:
Due to factors out of the control of Dirt Lifestyle, we cannot guarantee against improper use or unauthorized modifications of this information. Dirt Lifestyle assumes no liability or responsibility for property damages or injury incurred as a result of any information contained in this video. Use this information at your own risk. Dirt Lifestyle recommends safe practices when working on vehicles and/or with tools seen in this video. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Dirt Lifestyle. Be safe!
This video and description contains affiliate links, which means that if you click on one of the product links, I'll receive a small commission.
#jeep #jeepgladiator #jeepwrangler

Авто/Мото

Опубликовано:

 

2 апр 2022

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 174   
@DirtLifestyle
@DirtLifestyle 2 года назад
Here are some links to the products we installed in the video. Save upto 20% with coupon code "dirtlifestyle" at Northridge 4x4! www.northridge4x4.com/ Here are the brake upgrades from Power Stop 👊 www.powerstop.com/product/power-stop-z36-brake-kit/ Axle truss kit www.barnes4wd.com/Jeep-JT-Axle-Upgrades_c_293.html
@hjstrater
@hjstrater 2 года назад
Can you high speed montage new gears into my gladiator too 😂. Makes it look so easy.
@DirtLifestyle
@DirtLifestyle 2 года назад
Lol
@kjhaglfjhgfasd
@kjhaglfjhgfasd 2 года назад
I love that you show the problems you encounter. Because it gives a really good idea just how fabricating your own stuff actually works.
@DirtLifestyle
@DirtLifestyle 2 года назад
Thanks man 👍
@charlesnickell7257
@charlesnickell7257 2 года назад
Damm I wish I could do all this myself like yall but I physically can't so I'm stuck with paying someone but this just like the rest of your videos are so good thank you
@MTJ1986
@MTJ1986 2 года назад
Gladiator envy. That's all. Have some fun for the rest of us!
@DirtLifestyle
@DirtLifestyle 2 года назад
Lol
@dorsk84
@dorsk84 2 года назад
That metal Flight of the Bubble Bee was a really cool choice for the montage.
@DirtLifestyle
@DirtLifestyle 2 года назад
I was hoping someone would appreciate it!
@dorsk84
@dorsk84 2 года назад
@@DirtLifestyle Not only do I know my classical music, Thank you Bugs Bunny ans Elmer Fudd, I'm quite a metal head. So this was a nice mix.
@mikemorgan4670
@mikemorgan4670 2 года назад
Great vid Nate. While this type of work is way beyond my skill set, I still find it fascinating to watch and try to understand. Your simple explanations make it easier to comprehend. Thanks for the content Buddy.
@georgeeads8689
@georgeeads8689 2 года назад
Great job Nate. Always a pleasure to watch you.
@thesneak281
@thesneak281 2 года назад
Turn the music down a touch. Hard for me to hide and watch videos while the gf sleeps. Awesome job as always!
@gearlist
@gearlist 2 года назад
Incredible work as always Nate, we learn so much from these videos 👍
@shanes_bs2659
@shanes_bs2659 2 года назад
Great vid as usual! It looks like that lift is serving you well!
@EvanMoon
@EvanMoon 2 года назад
The sponsors are Rolling in and you deserve that. You put out awesome content. Keep it up sir!
@HighRiderSonoma
@HighRiderSonoma 2 года назад
Great video Nate!!!! Keep up the awesome work. I appreciate your vids!!! 🤘🏼😎🤙🏼
@PaulKaiser42
@PaulKaiser42 2 года назад
Great stuff as always!!! Sounds like you are heading out on a great adventure…so jealous👊🏻👊🏻
@loganpark7993
@loganpark7993 2 года назад
Thanks for the video. I enjoy you saying more instead of adding writing. I listen to it while working in the shop sometimes. Thanks again nate.
@RM_Garage
@RM_Garage 2 года назад
Nothing like the gear pattern being perfect the first time around (on the front)! Great video dude.
@xyzzzxyzzz6409
@xyzzzxyzzz6409 Год назад
You did real good work, cowboy!
@jefferyanderson3524
@jefferyanderson3524 2 года назад
I bet you are loving that new lift! That’s a life goal for me 😊
@SouthernComfortOutdoors
@SouthernComfortOutdoors 2 года назад
Man you done went and got a lift!! Very nice!
@jim4012
@jim4012 2 года назад
After being a spectator of the channel for a couple years, I have finally torn my rig apart into a million pieces. Thanks to folks like nate it is a reality! Thanks again for all of your hard work!
@jim4012
@jim4012 2 года назад
Also, I took over a pre-owned project. I'm finally making it my way.
@jiggyquinn5635
@jiggyquinn5635 2 года назад
Thank you, good luck, happy trails 🤠
@jason.hartson
@jason.hartson 2 года назад
Thanks for another awesome video Nate! Look forward to maybe seeing a walk around of the JT once its done.
@DirtLifestyle
@DirtLifestyle 2 года назад
Thanks for watching!
@hughwolfe1176
@hughwolfe1176 2 года назад
Nate you’ve got an abundance of skills in your toolbox, is there anything you can’t do… I mean that as a compliment… Stay safe out there.
@ryridesmotox
@ryridesmotox 2 года назад
Every time I see someone running patterns while doing gears it just makes me want to never do it myself lol. I'll gladly pay someone some cash for that... that and electrical. Love the videos. Keep em coming.
@klugersgarage2802
@klugersgarage2802 2 года назад
Nate, your going to have to tell us how those power stops work after 6 months. Almost every set I have had and warped. I am so happy to see you owning a lift. Love the video my dude.
@Defender110SLO
@Defender110SLO 2 года назад
Owsome work. Cheers. 🍻
@davidvancas5160
@davidvancas5160 2 года назад
Love the flight if the bumblebees!!! That’s awesome
@fishgutz4272
@fishgutz4272 2 года назад
I had 5.13 gears in my 2010 4dr Rubicon running 37x12 TRXUS MT. RMP a little higher than stock. Still got same mpg as stock, even running 75+ on the highway. Yet more enough for a lot of fun off road.
@pfr65
@pfr65 2 года назад
Nice upgrade....A lift in Nate's shop as well! Nice 👍
@erichughes9098
@erichughes9098 2 года назад
Thank you Nate for Another informative video 😎👍
@DirtLifestyle
@DirtLifestyle 2 года назад
Thank you for another positive comment 👍
@montechie
@montechie 2 года назад
These are both great ($) and dangerous ($) videos. Great to see how to do the work myself and save me money, dangerous because it helps me validate modifying my JTR (more)
@MrVPNG
@MrVPNG 2 года назад
But you even have the RCV hat on! Haha great video as always
@jimsather6892
@jimsather6892 2 года назад
I think you will be super happy with that setup. I have a nearly identical setup on my JL. Kept the 44s, went with Yukon 5.13, and Yukon chromoly axles in the rear. In front, went with RCV axles with FAD delete. Running on KM3 39 x 13.5. I find the KM3s to be quieter than Nittos. Anyway, it's held up for nearly 2 years with no breaks. The only thing I don't do is bounce it, but is been able to handle everything else with no issue.
@oleroy4749
@oleroy4749 2 года назад
Sweet Jack Stands!!!
@timking2194
@timking2194 2 года назад
Great video love that gladiator. Going with the same tires on my jk
@ruubguus4321
@ruubguus4321 2 года назад
Good Job 👍💯
@JustinKingOffroad
@JustinKingOffroad 2 года назад
on my last re-gear, i noticed the gears were broke in about 275 miles. the initial drive heat was long gone, and the mating surfaces looked great. so i put the fresh fluid in and ran it!
@davidcollins2219
@davidcollins2219 2 года назад
Great video. Before I went to one tons on my Gladiator I had a similar setup. Trussed front & rear, 5.13s, RCV w/ FAD delete. One recommendation I have is maybe not deleting the FAD and instead go with upgraded parts in it. I know RCV makes a 2 piece kit. The reason is, to get the castor back for best drivability, you may end up getting slight drive line vibration on the front. Just a suggestion. Geat build!
@PaydayGabeBCNV
@PaydayGabeBCNV 2 года назад
Love your content Nate,, The main thing I've learned from several of these videos is,, Jeep vehicles are insanely expensive and need expensive upgrades to the a viable option. When you do the front shaft/truss mod,, upgrade the ball joints, "while you're in there". 😄👍 Safe travels 🙏.
@edzimdahl1158
@edzimdahl1158 2 года назад
Jeeps aren't any more expensive than any other brand names, have had mine for years and haven't spent no where near the money see/hear people spending, and don't baby it, it's a daily and a playtoy that keeps on keeping on, from back when they still came with factory v8 power
@lyndonhamby7432
@lyndonhamby7432 2 года назад
39’s. Awesome 👍
@rustyrutledge9094
@rustyrutledge9094 2 года назад
Happy to see you don’t fear the gear… Most the guys on online forums try to tell you the Ecodiesel doesn’t need to be regeared for anything under 40’s 🙄. I run 4.56’s for the 35’s on my Gladiator Ecodiesel and think it’s perfect.
@zve482
@zve482 2 года назад
Impressive. 👍🏻👍🏻
@Flitzer514
@Flitzer514 2 года назад
I had no idea gears required a break-in period. I guess I learned something today.
@granitesand78
@granitesand78 2 года назад
Sick!
@PhatboyHD88
@PhatboyHD88 2 года назад
Nate i have Powerstop brakes on my Jeep and buddy they are awesome , worth every penny. Been on there for 2 years ( in PA winters) and there is hardly any rust on them at all rotors still look new , amazing brake sets, and stop fantastic , your gonna luv them..
@DirtLifestyle
@DirtLifestyle 2 года назад
I have them on my discovery 2 and am a big fan of drilled/slotted rotors. Helps keep things cool and reduces off-gasing for better stoping power. It's win win in my book 👍
@Thexkidd
@Thexkidd 2 года назад
Doesn’t the mud get stuck in there and reduce breaking?
@PhatboyHD88
@PhatboyHD88 2 года назад
@@Thexkidd nope , they are amazing brakes , i have done 3 Jeep badge of honor trails with Powerstop brakes installed and not a single issue , not a squeak noise nothing ..
@Thexkidd
@Thexkidd 2 года назад
@@PhatboyHD88 good to hear. May have to try them then. Just saw there big break kit on rock auto.
@SWBCrawler
@SWBCrawler 2 года назад
One of these days I'm going to do my first gear set. Its not going to go as smoothly as your videos, and Im going to come here angry. :P Seriously though, Nice work. Gladiators coming a long nice!
@jasoncurcio6631
@jasoncurcio6631 2 года назад
Just recently discovered your channel .. Love it. Just curious if you've ever had any experience with Yes welders haven't done any welding in years but I keep saying the advertisement for them curious if they were worth the money
@sonicsphincter6
@sonicsphincter6 2 года назад
I'm loving the metal version of Flight of the Bumblebee.
@MyShadowblue
@MyShadowblue 2 года назад
Nate's even safe when raising the lift! 😁
@MS-kh2je
@MS-kh2je 2 года назад
Thanks 😊
@StormbornJKU
@StormbornJKU 2 года назад
Nice!
@sierramantrvlnus
@sierramantrvlnus 2 года назад
Yay!
@mikebrandt4830
@mikebrandt4830 2 года назад
Music for this one is on point! 🤣
@OwensGarage
@OwensGarage 2 года назад
I just did my first gear change, put 4.10’s in my xj and swapped it to a high pinion Dana 30 at the same time. Must have done something right, I just drove it 4 hours down to George Washington national forest and back and they’re still quiet and nothing flew apart! Also it turns out an ‘01 xj with 2” lift, 30’s, 4.10 gears, and a rear lunchbox locker is WAY more capable than I thought it would be! And still got almost 17mpg highway- running 2800 rpm@ 75 mph. not bad.
@jpetton
@jpetton 2 года назад
"Flight of the Bumblebee" (Great music high speed video) is an orchestral interlude written by Nikolai Rimsky-Korsakov for his opera The Tale of Tsar Saltan, composed in 1899-1900. Its composition is intended to musically evoke the seemingly chaotic and rapidly changing flying pattern of a bumblebee. Wikipedia
@chuckieswickedgoodfab
@chuckieswickedgoodfab 2 года назад
Great Video Nate, and dude the lift!!!! I saw it in the older trailer video too, but man that is awesome. Would love to know maker, what it is rated for weight wise? I am in the market, been told to go with a 12K verus 9K so I don't have limitations and can lift a 1 ton truck if needed, which is possible since I do have a f250. I am interested in your two cents on it.
@adrianw3985
@adrianw3985 3 месяца назад
I have the full-time/part-time version of the 4:1 Rock-Trac transfer case on my Rubicon... these don't have the axle disconnect. I was pleasantly surprised to find that it is blocked off already from the factory.
@nickwoellert5045
@nickwoellert5045 2 года назад
Good morning sir!
@VideoShowMeHow
@VideoShowMeHow 2 года назад
Hey mate, thanks for the upload, super quality as always! Smashed it out! Hey quick q if I may - what was that black frame bracket thing that sits over the axle centre?
@clementc9975
@clementc9975 2 года назад
That’s a case spreader. It does exactly what it says. It presses the case open horizontally a very small amount to allow easier installation of the carrier. When the spreader is removed, it returns to original dimension.
@DirtLifestyle
@DirtLifestyle 2 года назад
The sway bar? Did it look like a bent rod?
@kylancook3477
@kylancook3477 2 года назад
Nate, I'd be curious what your brake Temps will be with those new brakes, maybe an after test? A before and after would been cool!
@apexpredator_jku
@apexpredator_jku 2 года назад
Now that you mentioned Powerstop.Any word on whether Trail To SEMA is ever making a return? It's by far my fave episodic wheeling series on The Tube. That whole squad has progressed so much since that last run & I'd love to see that influencer dream team reunite. It's like waiting for your favorite band to drop that long awaited album.
@kanefitty6849
@kanefitty6849 2 года назад
Excellent as usual…1st 🤙🏽
@DirtLifestyle
@DirtLifestyle 2 года назад
Thank you!
@Fit4Life921
@Fit4Life921 Год назад
I’m very interested to see what you do with FAD. I’ve been debating going single RCV shaft but I’m concerned about driveshaft vibrations and early wear
@stanleyfurash7929
@stanleyfurash7929 2 года назад
I know you like to use all your cool tools in your videos but doesn't anyone make a truss that fits on the rear axle? No matter what it's a cool build and you have mad fab skills.
@ratfarmers
@ratfarmers 2 года назад
I was watching this video and my wife said "hey you need one of those tools." I said yeah I have a shop press and she said no the other tool.... yeah I have a torque wrench also. Then she says NOOOO and pauses the video and gets up and points at the lift! This tool! You need this tool! She's not wrong. Hehe
@esimler
@esimler 2 года назад
Hey Nate, more TDI videos coming?
@GeorgeWashington-oz7lw
@GeorgeWashington-oz7lw 2 года назад
The first pattern looked fine, did you change it to get more contact towards the heel side for a specific reason? With a lot of load wouldn't the pattern drift toward to heel?
@johnhancock7063
@johnhancock7063 2 года назад
Love the 5.13 gears, they make alot of sense. The formula I use for gears says 4.88 but that is for stock performance, if you want mileage then go to 4.56, but if you want to help the minivan engine go to 5.13. Love the channel
@michaellarson2506
@michaellarson2506 2 года назад
Minivan engine?
@johnhancock7063
@johnhancock7063 2 года назад
Every engine that has came in a jeep since the 4.0 belongs in a minivan
@michaellarson2506
@michaellarson2506 2 года назад
I am not sure there is any “minivan engine” that has 442 lb-ft of torque…
@jim4012
@jim4012 2 года назад
I run 4:56 and 37". Down the road that will all change as the budget allows.
@chriskeller90
@chriskeller90 2 года назад
Why did you use a differential case spreader in this video? Compared to your other regear video. Thanks
@Escape.Idiocracy
@Escape.Idiocracy 2 года назад
Great video- can you report in one of your future videos what your fuel economy is? - would be interested to see your mileage even with towing on this trip you are getting ready for. Good stuff!! Thanks!
@Escape.Idiocracy
@Escape.Idiocracy 2 года назад
Any update on fuel economy and drive experience with the gears?
@summitdave8782
@summitdave8782 2 года назад
Sweet...
@DirtLifestyle
@DirtLifestyle 2 года назад
👊
@thaddeuslove6313
@thaddeuslove6313 2 года назад
You outta talk with Michael over at Bad Attitude Offroad for the best deals on parts
@protoculturematrix4369
@protoculturematrix4369 Год назад
How has your JT been holding up with the 39's? Things like axles, ball joints and such. Very interested in doing a build like yours.
@zacmarangi154
@zacmarangi154 2 года назад
One question I have, and have always wondered is, what are you listening while working on your rigs?
@johnluta4338
@johnluta4338 Год назад
Did you have to add new front driveshaft? Looking at the same lift for 37’s. But if I need a driveshaft , I might settle for the 2.5”.
@chillis28
@chillis28 2 года назад
👍👍
@FISHONOVERLAND
@FISHONOVERLAND Год назад
@DirtLifeStyle hey men nice rig ! I have 2022 JT diésel I want to run 40 inch tires (all trail difficulties every week) , I also tow a 4500 bass boat , what gear ratio would you recommend me ? Thanks in advance !👍
@bscottroberts
@bscottroberts 2 года назад
Where did you get the 39 BFGs? Been waiting months for 40 Nittos- national backorder....
@robertstafford2773
@robertstafford2773 Год назад
i am slowly building my jeep glad to do over land and with the up grades you have done will it handle 40 in tires? 40 are my goal on this jeep but real don.t want to do 60's
@mattbrew11
@mattbrew11 2 года назад
couple Qs 1: what is RPM at 70 in 8th? 2: did you swap in HD driveshafts and what joint size? 3: I have the same size tires on mine but KM3s can I hire you to do the same stuff on my diesel? I just dont trust the shops near me to make the conscious decision to chase the best patterns because they have virtually No skin in the game beyond the 500 mile inspection. With stock gearing my diesel gets 24-25 mpg on flat highways at 70 but it hangs out around 1600 rpm in 8th gear. Much hill and its in 7th at 1900ish rpm and big grades push it into 6th around 2150 but ive never seen it drop below 6th even on the big grade between san diego and yuma az what does happens is water temps will get to about 225 and the oil has been as hot as 245 and I wonder if lower gearing will help a bit with that?
@TwistedOff
@TwistedOff Год назад
👍
@davidcolinstillman5585
@davidcolinstillman5585 2 года назад
HI NATE 👋 YOU MAKE IT LOOK EASY 👀 & FAST ! I KNOW IT'S THE VIDEO 📹 SPEED . THANK YOU FOR LETTING ME TAG ALONG . LOVE WATCHING YOUR RU-vid CHANNEL ❤ HOPE EVERYTHING IS GOOD UP YOUR WAY ! HOPEFULLY THE GASOLINE ⛽ PRICES ARE A LITTLE BETTER UP YOUR WAY ? SAW AROUND 👀 DEATH VALLEY 💀 THE PRICES WERE $ 8.75 FOR REGULAR GAS ⛽ / LIFESTYLE OVERLAND . BE SAFE ! HAVE FUN ! ENJOYED 🍨 🍨 🍨 🍨 🍨 🍨 🍨 🍨 🍨 🍨 HOPE YOU & YOUR FAMILY HAVE AN AWESOME TRIP 👌 GOD BE WITH YOU ALL ALWAYS 🙏
@DirtLifestyle
@DirtLifestyle 2 года назад
Thanks! Yeah fuel prices are insane 🤦‍♂️
@roncua6900
@roncua6900 Год назад
Hello how is the drive now after the re bear I’m interested in the same set up.
@lanceerwin156
@lanceerwin156 2 года назад
Do the diff covers come with reusable seals from the factory?
@19TheDan
@19TheDan 2 года назад
what kind of mileage were you getting before and after this install. very curious in how it was affected
@nicholascooper1193
@nicholascooper1193 2 года назад
how tall is the ceiling in your shop? debating if a lift is "worth it" in my 10' ceiling.
@williamfrye9441
@williamfrye9441 2 года назад
Wait have you always had a lift? When did you put that in!?
@vagelisperrakis826
@vagelisperrakis826 2 года назад
the dana 44 gladiator axles are strong enough for those big tires??
@ayost62
@ayost62 2 года назад
Was that the gold Harbor Freight ratchet?
@TJrubicon
@TJrubicon 2 года назад
This is a nice gladiator, makes me want one. If only they didn’t cost a small fortune
@DB-yj3qc
@DB-yj3qc 2 года назад
Only if you want all the bells and whistles, mine didn't because I skipped past the extras that really jack up the price.
@nezzr78
@nezzr78 2 года назад
Did I miss the episode when you got the lift? I thought you had said previously you were going to wait until you moved... anyway, congrats! I'm sure it's your favorite tool already!
@DirtLifestyle
@DirtLifestyle 2 года назад
Nope, No episode on the lift. I just bought it and installed it 👍
@googlegok9637
@googlegok9637 2 года назад
Since you mention oil change. When do you make the first oil change on the drive train on a new truck like your Taco? 20 years ago you must change oil first time in diff and transfer after 1000, now it is 10k for a new truck. What is your opinion?
@DirtLifestyle
@DirtLifestyle 2 года назад
Personally I give everything a couple thousand miles to break in on a brand new rig before I start changing fluids. But with my tacoma and gladiator I insisted to have an oil change at around 5k. Fof everything else I stick to the schedule from the dealer
@SuperSilence23
@SuperSilence23 2 года назад
I thought cross drilled disc did not work well with off-roading
@petejoy6328
@petejoy6328 2 года назад
So I was wondering, when you first assembled the rearend gear, did you use the same size shims on both sides that came out of it? If so, then it was set incorrectly at the factory. Just wondering! Enjoy your trip.
@jim4012
@jim4012 2 года назад
I measured, cataloged and did the exact process of putting the r&p back together.
@MacFingon
@MacFingon Год назад
Do you still have the JT? What ever happened to the Gladiator?
@charlestraywick
@charlestraywick 2 года назад
I just did the same to my gladiator except I have Artec trusses. I’m curious why you chose the trusses you went with? The Artecs fit nicely on the JT.
@cdodge2996
@cdodge2996 2 года назад
Pretty sure Barnes is a sponsor. I know Nate has a discount code we can use there.
@tvh300
@tvh300 2 года назад
Is the lift new?
@valleytractorservices9310
@valleytractorservices9310 2 года назад
I can't believe front axle disconnects especially with Rubicon axles.
@stevenrailey9204
@stevenrailey9204 2 года назад
How's that lift treating you
@justinc5226
@justinc5226 2 года назад
You made it look so easy a cave man can do it
Далее
How to Re-Gear A Jeep Gladiator/Wrangler JL Axle!
29:07
Epic Reactions 😂
00:33
Просмотров 2,1 млн
Custom Rear Axle Build - Reckless Wrench Garage
15:34
Choosing The BEST Axle Gear Ratio
18:07
Просмотров 65 тыс.
What aftermarket diff cover guys don't tell you!
13:01
Тема BMW M5 CS закрыта #shorts
0:53
Просмотров 1,2 млн