Omgoodness brother thank you my jeep has been down for a year now. 4 mechanics. 3 crank sensors one cam sensor a computer and a partridge in a pear tree and not a dam thing. Found your video and now my jeep runs wtf. Thank you very much 👍
Hi Pedro, this video help me out so much with my mom's Jeep. A mechanic went and couldn't help her. Took your advice and bought a new relay and problem was solved. Thanks a lot again for your advice
Hey Pedro great video and some good info. I will have to check out my 01 WJ. Chris blew his engine in Moab last month, its getting rebuilt this week he probably won't have it for the Opener to go through the pit, but you are right there is a new Mud Bog pit! 100' long 20' wide, and 3 " deep its going to be a blast. Also fireworks at sunset. See you there.
Had to get some other things done to the ZJ, but finally did this today. Got the relay from Autozone, put it in, started right up and stayed running. #Salute
Got a 98 Cherokee Laredo and it’s been having the issue you explained, so gonna try it out and see what it does, thank you for the video and that’s a good lookin Jeep bud🤘🏻
@@kenskens69 thank you very much! Besides this little funky issue, my jeep is solid, minimal rust for being in Maine for a decade, no knocks, ticks, not a single light comes up on that dash, so this video has been a big help in the midst of multiple forums etc, thank you very much and safe driving 😎
check the connectot from you ECM that was my ptoblem with the cherokee on Move the ECM connectors If turn off There is your problem They have to be replaced be safe
im my was the ECM plug the one the right the one that is more close to the engine ,if you move it and turn off thatbis the problem or if it crank do the seme move the plug
Thank you for your advice. I replaced both relays on my jeep. It was doing the same thing to me. Well I just left the car running and it died all over again.
Go ahead and start your car and when it's running. Go and move the plug from the ECM and check if turned off if turn off are ECM plug connector bad that wasy proble
similar issue put a new body control mod and a new ecm, also checked for spark. my fuel pump keeps shutting off though and will die in about two seconds after starting. will stay running on brake cleaner though.
my was ECM cables check the 2 conector midel a d far right when you are in gront of the vherokee have some one traing to star de car and nove the plug and if star move aging oan if shout off you need new plug cables
i lost dash gauges this morning and got no fuel pump sound. my obd2 wont read the computer. i took apart my computer to find 3 swelling capisitors and burnt looking chipboard around them. i have the same jeep as you with the 5.2l engine. 3 plug computer under the ac lines there. the jeep dies barly going over a water puddle 2 days before this happened. i didnt find any shorts in my harnesses. but i did notist the computer was clean as if waters getting on it on the outside rite exactlly were the capisators are inisde the computer being cooled and heated over and over shocking the area i think with tempatures that it literatly made the thing short from stressing its board cooling wet then heating over the years.
well the Cheap why will be get the 7" lift from iron rock my is full custom my lift is 11" lift with 14" travel shocks, be safe and ha e fun and sorry for late respond.
My cherokee shut off on me on the fwy. I pulled over turned it off waited, turned it back on & drove off. So next day we put the scanner to it & it said misfire cyl #6.
I have an 02 Jeep Grand Cherokee Overland my Anti-Theft security alarm stays on Jeep will start run for 2 seconds and shut off how do I bypass or take it completely out please help
Thanks for the video I’ll try that I put a new computer in and fuel pump but my 1996 grand Cherokee keeps cutting off I’ll try this and see what happens
nop , at the and the problem was the ECM plug ,to check that get some one to try to star the cherokee and you move the ECM plug Specially the one one the right side if you are in front of the jeep
I also found that in that fuse/relay box, the contacts for the relays corrode and break off, I’m going to replace some of the contacts tomorrow, hopefully. I found it by touching all of the relays, and they were loose in the sockets!
I just took off my throttle body n cleaned it and then upon trying to relearn TB, now jeep won't start just makes a click but all dash lights flicker is that my anti theft.. .🤬. Anybody? 🙏
