To buy the Rough Country 2" Cube Lights from Amazon click this link! Rough Country 2" Black Series Amber: www.amazon.com/Rough-Country-Wrangler-Gladiator-70060/dp/B082FMF9PY/ref=sr_1_1_sspa?keywords=rough+country+70060&qid=1639092418&s=automotive&sr=1-1-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUExR0FDRVdZMklRSTZWJmVuY3J5cHRlZElkPUEwNTYzNDEzMUZHMDFUVktOSDBCUSZlbmNyeXB0ZWRBZElkPUEwODY4NDcwMkRXWUEyMkxTRlM0RCZ3aWRnZXROYW1lPXNwX2F0ZiZhY3Rpb249Y2xpY2tSZWRpcmVjdCZkb05vdExvZ0NsaWNrPXRydWU=
Great video !! I know the cube lights have 3 cables white black and blue what do you do to the black cable ? I did not see you connect it to anything thanks
Thanks! Sorry for the late reply. The black cable is the ground. I put a ring connector on the black cable. There is good place to ground next to the battery see 8:12 in the video. Hopefully i’ve answered your question.
Great vids been following you for awhile how are the lights holding up long term? Any moisture in them or any issues? And do you drive with the amber drl on the road
the light has four leds that light up white, but when you turn on the amber DRL, do all four leds light up amber too? in your video you can see that they turn on everything in amber, and in the lights that came to me only two flat lights that are in the middle turn on amber
@@MoreDirtMoreDistance i installed the light bar but was able to connect the wiring and light up. Looked up all over youtube and wasnt able to find one.
@@sauravm9093 It’s been awhile… but, I connected mine directly to the factory auxiliary switch, so I didn’t use the wiring harness. Red power wire connected to the aux switch and black ground wire grounded to the body.
So the Power to the switch and the ground and power wire you just cut and throw away ? Is that because when wiring up to the sux switches those have power ?