No video :(

JL Jeep Wrangler - Rough Country Black Series Quad LED POD Lights

Подписаться 2,6 тыс.

Просмотров 11 тыс.

50% 1

►Subscribe! ►bit.ly/DANTVSUB
►Hit That Like Button►
►Instagram ► / atlc8corvette
►Amazon Links ► Expand Description to access links
In today's video we run through a quick installation of the Rough Country Black Series Quad LED POD Lights. These are great for the trail at night, and also offer Amber DRLs to help people see you in the day and at night. The installation was pretty straight-forward, but I did have to redo some of the wiring so that I could use the Rough Country Multiple Light Controller instead of the included rocker switch that I have no place for. If you are not yet subscribed, please give us a sub, hit the link button, and comment below. It helps us grow the channel.
Amazon Affiliate Links
- Rough Country Multiple Light Controller MLC-6 - amzn.to/2Yqr00P
- Rough Country 12" Black Series Single Row CREE LED Light Bar 70712BL - amzn.to/3aUdk2X
- Rough Country 12" Dual Row LED Light Bar CREE - amzn.to/2YspEmi
- Rough Country 2" LED Square Cubes - amzn.to/2Yqrkg3
- Smittybilt Stryker Front Bumper JK/JL Jeeps - amzn.to/3gvpZLb
- Smittybilt Stryker Front Bumper Wings for JK/JL Jeeps - amzn.to/32lZiDx
- Amazon Trim Removal Tool Kit - amzn.to/2Ea6oD9
- Heath Gun 1800W - amzn.to/3j8uNHT

Опубликовано:

29 авг 2020

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 16

@T3RROR 3 года назад

Cool video! Those should get the job done on the trail!

@DeeperImageAutomotive 3 года назад

T3RROR can’t wait to test them out

@dmwil1 6 месяцев назад

How have these lights held up for you? Has the paint faded? Or do they still look and perform like new?

@DeeperImageAutomotive 6 месяцев назад

Lights work as new. No paint fade at all but the Jeep is parked in my garage most of the time, so not always in the sun. That’s several years in different elements and weather with zero issues. Would buy again any day.

@joehenderson4267 Год назад

Can you share a picture of the wires to the MLC-6 after you cleaned everything up?

@kathymilam9376 2 года назад

Hi! And thank you so much for your video! I’m having the hardest time figuring out which bracket is left and which is right, and RC has been no help. One light sits further forward than the other on the bracket, does that light go on the outside edge or the inside? I currently have the brackets with that light sitting on the outside of the vehicle, but not sure if it looks right. Thanks for the help! Kathy

@DeeperImageAutomotive 2 года назад

What I did was go with the bracket that allowed the outside light to sit further back. So my outside lights sit further back than the inner lights. They’re also somewhat adjustable so you have them flush too. Not sure if that helps. I’ll take a pic and post it on my IG account so you can see it how they sit. @atljeepwrangler

@kathymilam9376 2 года назад

@@DeeperImageAutomotive Ok! I’m going to move mine. I’ll check out your IG. Thank you!

@andrewbundy7253 3 года назад

So did you just put all of the negatives under the same terminal then?

@DeeperImageAutomotive 3 года назад

I separated the terminals for the AMBER driving lights, and the actual spreader lights. So I used two banks in my Multi-Light controller. You can share the negative as the positive would still control the actual lights on the switch they provide, or if you use a multi light controller like the MLC. You could also connect everything on the same terminals but then the daytime amber lights would be on with the LED lights.

@cthibo366 3 года назад

No video of what they look at at night???

@DeeperImageAutomotive 3 года назад

I need to get some footage at night for sure. They are extremely bright. Here’s a pic I took but it doesn’t do it justice instagram.com/p/CEiYhbbjM1i/

@zerpnock4090 3 года назад

What wires did you cut out? I am installing the rough country black series 2inch square cree led lights and also have the same switch panel inside but I am struggling with connecting the the wires and knowing what I don’t need to use since I am not using the switch that came with the kit.

@DeeperImageAutomotive 3 года назад

I cutout all the wires leading to the switch harness and just kept the wires from the fuse to the cubes. I just ram them to my rough country light controller so I could just turn them on and off from there. The wires can change colors from what a commenter said.

@vv2030 3 года назад

White is amber DRL and blue is bright white don’t trust this video like I did haha oh boy learn not to trust everything on internet

@dirtracing1 6 месяцев назад

yes correct i’ve just installed some on my jeep gladiator and followed some of his instructions and turned out blue is actually the led not the amber now i have to go and rewire them