No video :(

Jeep rear main oil seal and oil pan gasket

Подписаться 81 тыс.

Просмотров 288 тыс.

50% 1

1994 Jeep Wrangler rear main oil seal and oil pan seal. We give you a step by step look at how we replace them.
Jeep Wrangler YJ 4L Rear Main Oil Seal:
amzn.to/2fSovAX
Proudly sponsored by Enginetech enginetech.com/
Engine rebuild kit I am using on my 4.0L rebuild: amzn.to/3mKW5HD
If my videos have helped you save some money , and you would like to give back to the JeepSolid Garage, consider joining my Patreon page!! There's no obligation though. I am happy to help others out, but it does take a lot of my time.
/ jeepsolid
JeepSolid Merchandise: Hats, Shirts, Mugs, etc: / @jeepsolid
👨‍🔧 A few of my favorite tools 👇
Pro-Lift 3ton Jack Stand: amzn.to/2RU6rGa
Pro-Lift 6ton Jack Stand: amzn.to/33R9epj
2.5 Ton Jack: amzn.to/3auPDPj
Milwaukee 3/8 Cordless Ratchet: amzn.to/39x7WAO
Extendable Socket Wrench: amzn.to/2LJNV2k
1/2" Craftsman Impact Driver. amzn.to/3v3V7Kv
24" Breaker Bar: amzn.to/2RnuSNC
Craftsman Torque Wrench: amzn.to/2Wj7JiD
Dewalt 1/4 impact driver: amzn.to/2GYEJ4w
Be sure to get the kit with 2 batteries. You'll be glad you did!
Craftsman 165 Mechanics Tool Set: amzn.to/2GXRlIg
Excellent tool set that will last a lifetime.
Oil filter Wrench: amzn.to/2IbgT9e
Large Capacity Oil Drain Pan: amzn.to/2OjqXjh
Subscribe: / jeepsolid
Follow Me!!
Facebook: / watchjeepsolid
Instagram: / jeepsolid
Twitter: / dale_jeepsolid
Professional business inquires: email me at dale@jeepsolid.com
#jeep #jeepwrangler #jeeprepair
Some of the links provided are affiliate links, where I earn a very very very small commission for directing you to the website. If you make a purchase, it does not increase your cost, but helps me fund my channel. Thanks for watching JeepSolid. I am not a certified mechanic, just a hobbyist who enjoys working on Jeeps.

Опубликовано:

6 мар 2013

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 253

@BroncoSolid 5 месяцев назад

Nothing like having to watch yourself on RU-vid from 10 years ago to remember how you did a job...because there's another Jeep that needs it done! The gift that keeps on giving.

@JeepSolid 5 месяцев назад

Haha! You doing this soon?

@BroncoSolid 5 месяцев назад

@@JeepSolid I was thinking I might. I know I need to replace the oil pan gasket, and thought I might do the rear main at the same time. Still need to crawl under and inspect.

@dkhallal Год назад

At 9 years old this video is still the best one on this job. I’m not sure if mine needs this, I’ve had some tranny/transfer leaks that I’ve fixed first. About to finish up adding power steering and driving it for a long distance to see if in fact I have a seal leak or not. Great job guys. It’s funny how the video gear/quality has improved as well!

@340rps 10 лет назад

Just did a 98 cherokee. Just be advised many times the oil filter adapter will leak and the oil will make it's way to the back of the engine and look like the rear main is leaking. A few bucks to replace the orings for that and a half hours time. The valve cover also is a common leak spot that will drip to the same area. Point is be sure to check these areas first before assuming it is the rear main.

@rosairedubrule60 3 года назад

thanks

@mcanderson3511 7 лет назад

Nice job, guys! I'm a retired dealership tech, and you do better work than most of the people I've worked with for years.

@JeepSolid 7 лет назад

+M C Anderson Haha. Thanks!

@chrisklemp644 4 года назад

Do the oil pump your down there allready...

@NewYorker79924 10 лет назад

Very clear video from "amateurs" - oh, like me :) Thanks very much for the clear camera work on the critical points.

@chrisarmstrong5038 8 лет назад

awesome video guys. It's hard to come by good videos like this. Usually I'm looking for a jeep repair video and it's just Jimbob and Cletus that can't hold a camera and talk about their lawnmower without doing what the video title is.

@BroncoSolid 8 лет назад

+Chris Armstrong How did you know our real names?

@chrisarmstrong5038 8 лет назад

Lol

@JeepSolid 8 лет назад

+Chris Armstrong Haha! That's awesome, Chris! Yeah, there's a lot of bad videos out there. Sometimes you can't even see what they're doing.. Thx for your support!

@taxman121 3 года назад

This is probably the best Jeep rear main seal video on RU-vid. I am doing this to my 1980 CJ5 and the process is exactly the same. Getting visual instructions of this process helps. Thanks!

@andrewthixson 3 месяца назад

Did this work? 84 cj7 and terrified of it

@taxman121 3 месяца назад

@@andrewthixson Yes! It is a little intimidating. Getting the old seal out was easy. Sliding the new one in was very hard. Have to go slow to not damage the new seal. Use the instructions in the video. You really need to make sure you install it in the correct orientation so look at the old one and take pictures especially if it takes you a couple days. I bought two new seals in case I damaged one during the install. They are cheap so might as well. Didn’t end up needing it though.

@danj9094 9 лет назад

This video gave me the courage to finally attempt changing my oil pan gasket and rear main seal on a 1994 Jeep Cherokee 4.0. I didn't attempt it before because I thought I would have to remove the transmission. It did take me a little while to get the upper half of the main seal to budge but I finally got it out. Reinstalling it wasn't too bad after I lubed it up w/ soap. After about a week I have no leaks, first time in about 8 to 10 years. I may be able to even remove the cardboard from the floor of the garage. Thanks again for the video.

@JeepSolid 9 лет назад

Dan J That's awesome!! Love the part of removing the cardboard from the garage :)

@moomba2009 3 года назад

Great video guys. Just retired and finally getting around to tinkering with me 77 CJ7 and this was my first job. My challenges were to get the top seal out. It was really stubborn. Someone on a forum said loosen all the bearing caps and it should relieve some pressure. But after letting it sit for a couple days with the cap off, I tried one last time and out it came. My other challenge was getting the oil pan to drop off. The one mount was in the away. I removed the plate and jacked up the engine a bit and finally after a lot of rattling and giggling, I manage to get it off. I hope putting it back up is not as much as an issue. Thanks again. Mark

@ryanprendergast6408 3 года назад

I was dreading this job but after watching this video I feel a bit more comfortable with doing this to my 97 tj. You guys make great content and it has been very helpful! Thanks!!!!

@jargonstarcraft9157 10 лет назад

Awesome video guys! Very helpful. I thought I would have to drop the transmission to get to the rear main seal. Quite innovative!

@experience4064 11 лет назад

Your video gives me a pretty good idea of what's causing my engine to leak oil and how to fix it. Thanks.

@alopez2459 2 года назад

Love the videos!!! Very informative and helpful when following along with my repairs. Just did my 1990 YJ… Quick tip for upper rear main seal placement: I was having a hard time inserting the upper seal by hand (even with dish soap & oil) * I realized that I could use needle nose pliers to gently push the seal into place, reverse of the way I removed it. Thanks guys keep up the videos❤️‍🔥 And Keep on Jeepin’ 🤙🏾

@sotomayorzequiel 8 лет назад

I just get this done on xj 1999 it's really simple when you follow the instructions! ! ohh every video for xj said you will need pull off the front axle, I don't!!! just use a extra jack and put it in between top right side of axle and chassis my oil pan came off easy! thanks guys I save some money watching the video!

@Exocartonic 8 лет назад

I'm getting ready to replace the oil pan and rear main seal on 96 xj.were exactly do you put the jack you said between the top right side of the axel and chassis.does that mean behind the right side of the axel with the jeeps chassis resting on the jack?

@sotomayorzequiel 8 лет назад

Driver side! right in the axle between drive shaft and coil spring mount

@Exocartonic 8 лет назад

+zequiel sotomayor ok so Jack up the front axel place a jack stand under the axel between the driver side coil spring and the differential thx.how tall did you sent up the jack stand?

@sotomayorzequiel 8 лет назад

+Exocartonic no I just leave a regular jack till I get done the work but if you want to set up a jack stand it should be OK. safety 1st!

@sotomayorzequiel 8 лет назад

+Exocartonic the jack goes from the axle to the chassis!!

@sand4232 4 года назад

Thank you for the video. It helped me to change my rear main seal and oil pan gasket in our 1991 Wrangler 4.0.. we had a leak that was getting worse at the back of the engine.. great video, clear instructions, appreciate it.

@KG-sy2vs 8 лет назад

This video is one of the best DIY videos I have seen on here. Looking to buy my next jeep and it has a bad rear seal so wasn't sure if I wanted to get involved. This video clearly showed me that I can purchase the new toy and fix it myself. Thanks for posting!!!

@JeepSolid 8 лет назад

+Kyle Mccourt Thanks Kyle, glad it helped ya out!

@eli9000 9 лет назад

Nice job on the video guys! Very informative and the camera was where it needed to be to show and give the best explanation! Thanks =)

@MrBurtonPE 3 года назад

Its been over 10 years since I did this on my YJ, well here goes rear main #2 on my newly acquired '88 Comanche! (has a '93 4.0 HO swapped in) Thanks for the tips and video!

@MELISSAMDC104 9 лет назад

My Jeep Wrangler has the same problem and I believe a leak at the rear main seal also. I just fixed the speedometer now I am ready to tackle this oil drip. Thanks for the video.

@jamesjohns8043 10 лет назад

I'm doing this on a TJ tomorrow, and this video was very helpful. I'll see how it goes.

@jasonm1690 10 лет назад

How did it go?

@jamesjohns8043 10 лет назад

The top wouldn't come out of the block, but I replaced the bottom half and it hasn't leaked since.

@dukejohnson99 Год назад

I learned from working underneath a 59 T-bird that not only do safety glasses keep rust and dirt out of your eyes, but a shower cap keeps them out of your hair, as well. It gets a little warm, though

@michaelhopkins6033 9 лет назад

Thanks guys, you just saved me a ton of headache on an 88 YJ.

@tugginalong 3 года назад

I like that you typically include the torque spec and i also like when you include the socket size. It means I get up and down less often.

@timoy4988 3 года назад

Nice work gentlemen, 8 years old and still getting traction. Another subscriber too! 👍👍

@vartazminassian9114 8 лет назад

This is Tazymoto... Thanking you guys for posting. Awesome job, well presented, easily understood. Thank you

@JeepSolid 8 лет назад

+Vartaz “TAZ” Minassian Thanks for watching!

@martinriggs6934 5 лет назад

Great vid. Ive got a 2001 and the exhaust needs to be removed to get at everything but Im still going to do it myself. The bearing info and close up was excellent, thats the thing I was most worried about. Thanks for the good close ups of the process.

@JeepSolid 5 лет назад

Awesome! Glad it t helps.

@littlehomie3335 9 лет назад

Great video. I will be doing the same to my xj. I think since I will have the pan off, I will go ahead and save me a possible redo of this and replace the oil pump while I am in there. 116k miles right now. Never know how long that pump will last.

@ipla3077 10 лет назад

you guys did a great job. i have to do the same to my jeep and glad i seen this video. very clear very thorough. Thank you

@russwilson2182 4 года назад

First thank you for all you do with these videos, they are really good! We followed the instructions to a T but unfortunately the rear seal is still leaking. Anyone else have similar issues?

@Forlornguild 7 лет назад

Thanks for the video. It went great on an '89. Apparently someone had previously changed only the lower part of the seal. The upper part would not punch out; had to loosen the main bearing caps halfway back on the crank to get the top seal out and just torqued them back down afterwards.

@JeepSolid 7 лет назад

I always enjoy getting under the Jeep for a good project! Thanks for watching!

@joshuabaker8836 Год назад

What did you torque the other bearing caps too? 80?

@Forlornguild Год назад

@@joshuabaker8836 I don't remember! Had to look it up when I did it.

@CanYouFlyBackwards 7 лет назад

Nice Job JeepSolid! Video was straight forwards and I have a buddy who owes me a favor, so yeah I think I will tackle this myself too.

@JT-ee1ii 3 года назад

Excellent video! I don't understand the RTV on the sides of the beveled edge of the cap. Please advise.

@jaye23able 9 лет назад

this has been very helpful to me because my 95 Jeep Grand Cherokee has the same engine with the same problem.

@elisoto8020 8 лет назад

Really excellent video. I'm a little jealous that your exhaust runs beside and behind the oil pan. On the TJ's it runs under the oil pan.

@JeepSolid 8 лет назад

+Eli Soto Yeah, it's nice and open on the YJ ;)

@jeffreya.657 6 лет назад

You are a very good instructor. Clear and Concise with nice video and caution tips. I subscribed for sure Thank you.

@JeepSolid 6 лет назад

Thanks for watching! Hope it helped ya out.

@zooba1974 2 года назад

Can't thank you enough for these excellent, helpful videos!!!!

@hoots02 10 лет назад

thank you for posting this, got mine off now just gotta get the new one in.

@harryaguilar1705 3 года назад

Would this procedure be the same for the 4.2l inline 6?

@WillyPark 3 года назад

Somehow, the algorithm found me. Great first video!!

@JeepSolid 3 года назад

Haha! That was long ago. Thanks

@manvstaco 8 лет назад

It's funny how people keep asking if you removed the front axle instead of watching the video... Niice work this will be helpful :)

@robinmays5381 9 лет назад

Great video as mentioned before, now I have the confidence to tackle this job!!! GO DUCKS!!!

@iwannas13 4 года назад

tomorrow is the day, great video bro 93 yj 2.5

@JeepSolid 4 года назад

Cool!! Have fun and hope all goes well

@GonzalezMission 7 лет назад

Thanks for the video, have the same issue on my 08 Unlimited and now I'm confident I can fix it. Thumbs up!

@JeepSolid 7 лет назад

Cool! Thanks for watching.

@jttj4 10 лет назад

Great video. Very informative. Got to do mine on my 2000 Wranger. - John from Baltimore

@silv1010 10 лет назад

is it kinda the same for a 04 tj? by putting in the new rear main seal

@bmedeiros678 10 лет назад

Great job guys. Learned a lot.

@tomscott4163 4 года назад

Great video! Doing mine tomorrow. Hope it goes as good as yours did.

@rocka2657 8 лет назад

that is exactly where mine is leaking from too. thanks for the video.

@JeepSolid 8 лет назад

+Errock A Glad it helped ya out. This repair worked really well. Did this job few years ago and still No leaks!

@425diaz 11 лет назад

do you put rtv between pan and gasket (i got the same felpro gasket)?

@flowerchild777 4 года назад

Beautiful job guys. I think I can do this, should I need to 👍Thanks so much

@7Thela 11 лет назад

About to replace my gasket. Gods advice, nice vid

@tacx1 Год назад

Great video ! Very well explained.

@1divemaster1 9 лет назад

Good video. Just wish I'd seen it before I did mine.

@JeepSolid 11 лет назад

Nope, no RTV needed under the gasket. Just put a little on top of the oil pan gasket in the 4 spots I show in the video.

@RandyRTorres 3 месяца назад

Changed my oil pan gasket and rear main seal.... Leaking from rear main seal again. Any thoughts?

@antientdude1100 7 лет назад

Thank you for a great video.. It showed me everything I need to know to fix my own... Thanks again..

@athanasiosmanole5092 7 лет назад

You guys are awesome. Good job. I'm going to do this this weekend!

@JeepSolid 7 лет назад

+Athanasios Manole Nice! Let us know how it goes and any headaches you may run into. Maybe some advice on what you did. Thx!

@chloe30551 6 лет назад

Great video, gotta do this in a couple months. You guys are awesome!

@JeepSolid 6 лет назад

Thanks!

@JeepSolid 11 лет назад

as you can see in my video, you can get to the rear main seal simply by dropping the oil pan.

@your2nd 2 года назад

I picked a really old video so only you would see this comment .... Tell everyone you decided to paint your jeep like a Barbie jeep Pink with big flowers and see what reaction you get.....that would be funny !

@OSRS_Drone 4 месяца назад

same concept for the 2.5l and ax5?

@brandongillespie3355 3 года назад

Great video, thanks for sharing. Got to do mine next.

@B-U-C-K-S-H-O-T 7 лет назад

Great video and how to and the tips yall had. Helps a ton.

@JeepSolid 7 лет назад

+Rugger Ray Glad it helped ya out!

@blujan52 9 лет назад

Great video, thanks for posting.

@chevas91187 2 года назад

I have a tj 97 2.5 and the rear ring its really different. What i need do. The ring his complete not 2 parts

@DJCryptoStix 4 года назад

i just got another inline 6 and she needs all new seals and gaskets. thanks for the info.

@JeepSolid 4 года назад

Nice!

@DJCryptoStix 4 года назад

@@JeepSolid my lower ball joint was just like yours. Now I'm having an issue getting the lower one to go in straight. I have to give it a break and try again tomorrow. I also have a stuck hub on the other side. If anyone has any tips that's would be great.

@sandmann-offroad3035 6 лет назад

Thanks for all the great videos!

@JeepSolid 6 лет назад

+Sandmann-Offroad No prob. Thx for watching!

@j.williams560 3 года назад

Old vid, great vid.

@matthewwallace4609 2 года назад

Can’t thank you enough, great video!

@jeepnut04 8 лет назад

Thanks you for posting this, very helpful.

@muaddib420 11 лет назад

Nice video. Wish I had so much room under my XJ LOL

@jeepadventures9649 2 года назад

Great video. I would like to replace the rear main oil seal and oil pan gasket but I have a question: What is the torque for the oil pan gasket bolts? Thanks

@ninjarakupwnzecoventurecra3430 8 лет назад

might want to notate that you should use "High Temp" black rtv, guy at the store almost gave me the one for weather stripping crap

@JeepSolid 8 лет назад

Haha! weather stripping caulk! That's funny. Good tip! Thx.

@clint460 4 года назад

There is a little channel in the top portion of the seal (that goes up around the top of the crank). I pulled it out without realizing which way it faced, do you know?

@0426dav 5 лет назад

Excellent video, very informative. Thank You.

@JeepSolid 5 лет назад

Thanks for watching!

@haorla 5 лет назад

Most mechanics tell me that the Transmission has to be dropped to do this job.. I have a 1995 Jeep wrangler YJ 4.OL straight 6 cylinder. Your video shows it done without dropping the trans. Can I get any advise.

@eddievazquez6000 10 лет назад

I'm becoming a regular to your videos. Since I have a 94 YJ it's very useful. Thank you again for the video. I have a question about the gap in the transmission housing near the engine. Is there supposed to be a gasket there? I couldn't tell in the video if your Jeep had a gasket there? Thank you in advance

@JeepSolid 10 лет назад

Great! Glad it helped ya. In response to your question, I'm not sure which gap you're talking about, but I cover all the steps (and parts) I used in the video.

@eddievazquez6000 10 лет назад

Right where the transmission meets the engine, the transmission housing has a small gap on the bottom side. Nothing to do with rear main seal.

@riverhooligan8237 10 лет назад

Eddie Vazquez there's is suppose to be a dust cover there bub

@Asdfghjkl1234 3 года назад

Great video!! Any Chicago recommendations for Jeep main seal and other Jeep work ? I have a 95 Cherokee 4 cylinder

@mahladik1 9 лет назад

was the bottom half of the seal raised above the bearing cap slightly, and was it difficult to slide the upper half in? I made an attempt at this and failed but am going to try again.

@ninja63639 6 лет назад

Where did you guys get the "shoehorn"?

@JeepSolid 6 лет назад

It came with the new seal.

@mmoore76008 11 лет назад

First of all, excellent video! Very helpful, so thank you. The only concern I have is that I was told by an auto mechanic that you have to drop the transmission to get to the rear main seal. Is that false? I have a 98 Jeep Wrangler w/ the inline 6.

@stettstraps 9 лет назад

Manual [section 9-91] stated the use of 518 Loctite[anaerobic]RTV. It also illustrates a 19mm long strip of RTV on top of bearing cap[not wider than 6mm]. Strip starts just behind the L shape of new gasket to half way point of bolt hole. I don't know what way is best? Sounds like you've done numerous times. What type of RTV did you use?

@josephfarley7983 2 года назад

Hello Jeepsolid, you made sharing what gaskets you went with?. I’m reading reviews that the felpro doesn’t have the friendliest fit.. my valve cover went off without a hitch.. just don’t want to run into an issue once I got the pan down. Thanks for all these cool videos!

@rustyshackleford5058 6 лет назад

So I learned a valuable lesson today to put a flat board on the jack instead of folded up towel...there is a 1/2" dent now at the bottom corner where the oil pickup tube is. I'm scared to start the engine without removing the pan an beating it back. Is half an inch dent close to hitting the pick up?

@JeepSolid 6 лет назад

+Lawrence Bury oh man, bummer. That's a good question. I'm not exactly sure what the gap is between the pick up and bottom of the pan....

@jorgenoneya5382 4 года назад

05/06 you have to remove the exhaust to drop the pan. What sucked for me the most on my 05 TJ is removing the freaking catalytic converters (exhaust) in order to drop the oil pan!!!

@alfonsocastro3523 4 года назад

Just posting to get an idea just bought a 97 jeep grand cherokee straight 6 and had to replace alternator and t case but now it will sart and run for a bit and turn off any ideas

@1nazarett1 11 лет назад

Nicely done. Keep on jeeping

@mkay8627 3 года назад

Hi, just came across this great video before replacing my rear main seal. everything went well until I went to insert the upper half of the seal. It was really hard to get into place even when using dish soap. Im sure I put it in the right direction; grooved side facing oil, but it was really tight. Could it just be because its new and not as compressed as the old seal? everyone else seems to be threading their seals in with much less resistance than I experienced. Anyone else out there have this issue?

@TheAverageJo1 2 года назад

I’m jumping on this project this weekend this video is fantastic! @jeepsolid what type of RTV did you use? I have a 95 YJ which is almost identical

@krisbakker3437 10 лет назад

Clean cut video thanks

@XIYCK0 4 года назад

Beautiful work thanks !

@BastardoDemonio 8 лет назад

This is next month's project! Can you add the link to the seal and gaskets that you guys used, please?

@jamescolby4240 11 лет назад

Sorry let me elaborate, I'm replacing my gasket and was told I have to remove the exhaust and maybe the converter. Did you have to remove anything to get the oil pan down?

@jagspe0708 5 лет назад

This is a great video. Is this the same process for a 4.2? I have a 1989 YJ Manual.

@joseromero344 4 года назад

Is this the same process for a 2.5 4 cylinder???

@chicago85bearz 11 лет назад

I am interested to know how it worked out, any leaks? Also what manufacturer was that for the gasket?

@RandyRTorres 4 месяца назад

Thank you

@0426dav 5 лет назад

Did you have to do anything to the transmission to get to the seal?

@JoeVizethum 4 года назад

good video, boys - this job looks super easy in your case ! How was removing the oil pan ? I heard pita stories with working on the starter, exhaust, axle,.... before being able to take the pan out - thanks.