Jeep Wrangler JL Smittybilt XRC Gen2 Front Bumper Review & Install

Подписаться 231 тыс.

Просмотров 37 тыс.

50% 1

Shop this Smittybilt XRC Gen2 Front Bumper: terrain.jp/2CeEXTV
Subscribe for Daily Jeep Videos: terrain.jp/SubscribeXTyt
If you’re looking for reliable protection for your Wrangler’s front end, the Smittybilt XRC Gen2 Front Bumper is the upgrade for you. Designed to provide maximum clearance for rock crawling due to its high-degree approach angles and raised corners, this front bumper set is sure to provide decent protection for your Wrangler, whether you’re driving over hills, rocky terrain, sand dunes, or any other path that isn’t a paved road. If you’re serious about improving the quality of your off-road adventure experience, then you can’t go wrong with this bumper set.
Smittybilt designed the XRC Gen2 Front Bumper to suit the demands of your off-road excursions. Aside from having mount tabs for lights that are 9 inches in diameter, this front bumper also accommodates D-ring and jack point installation.
This front bumper kit from Smittybilt is constructed from high-quality, high-strength 3/16-inch cold rolled steel. It is reinforced with PP+TPO slip strips that offer additional damage protection. To top it all off, the light textured black finish makes this bumper an aesthetically pleasing addition to your Wrangler.
Smittybilt offers a 5-year warranty for this front bumper’s black finish. You may check the manufacturer’s website or reach out to them directly for specific details on the warranty terms and conditions. terrain.jp/2CeEXTV
Item J126720-JL
----------------------------------------------------------------
Give ExtremeTerrain a follow for the latest Jeep Wrangler news, videos, pictures and content!
Subscribe for Daily Jeep Videos: terrain.jp/SubscribeXTyt
Facebook: / extremeterrain
Twitter: / extremeterrain
Google+: www.google.com/+extremeterrain
Instagram: / extremeterrain
ExtremeTerrain.com is your home for the best in aftermarket parts for your Jeep Wrangler JL, JK, TJ, and YJ!
www.extremeterrain.com

Авто/Мото

Опубликовано:

25 ноя 2019

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 33

@extremeterrain 4 года назад

Shop this Smittybilt XRC Gen2 Front Bumper: terrain.jp/2CeEXTV Subscribe for Daily Jeep Videos: terrain.jp/SubscribeXTyt

@tdg911 3 года назад

Thanks for posting this. Helped me out quite a bit :)

@nachovalenti 4 года назад

Really nice front bumper and looks like a high quality build. Thanks for sharing.

@extremeterrain 4 года назад

Thanks for watching, Nacho! We appreciate it! -Zach

@gasperajdnik5627 4 года назад

Can't wait for 150.000k. 😎☺️

@stinzz3 4 года назад

Take it from me. I have this bumper on my JK 2 years going strong and I do not have 1 rust spot on it! Im so glad I pulled the trigger on this. My advice to you ... If you install a winch take the bumper off (trust me its easier lol!) Its very difficult to get your anchor bolts for your winch tight and keep in mind this bumper sits very close to your grill so be mindful not to scratch the paint. If you upgrade your headlights put some painters tape between the grill and bumper to protect your paint. Good luck!

@extremeterrain 4 года назад

Super happy to hear you're enjoying the bumper!! Thanks for watching and your comment! -Zach

@markgebo197 4 месяца назад

Thanks for the video. It helped a lot!🎉

@extremeterrain 3 месяца назад

Thanks for watching! -Zach

@PaulWellner 2 года назад

I wish I could say the same about my install. Great directions but the hardware sent was cheap as well as some missing. Another issue was paint on the threads caused me to have to go buy a die to chase them with so I could get the nuts started. Then there is the cheap plastic retainer spacers that all snapped trying to thread them on. Sent an email to go to management and nothing, just crickets...... Love the look of the bumper sitting on my garage floor though.

@polarisflyer 3 года назад

Which winch do you recommend for this bumper? I bought this (yes, from you) and the installation went perfectly thanks to your video. However, I bought a certain 12K winch that just BARELY fits. Upon closer inspection, I noticed that it was pinching the OEM LED fog light wiring plug. Sadly, I'll have to remove the winch and return it. So, I am open to the ideas of which winch fits without being TOO snug. Thank you!

@anthonyrenaud5783 4 года назад

Hey Joe. Is this install the same for a 2012 Jeep Wrangler JKU?

@Steppin1107 4 года назад

Will the SRC front bumper fit a sport jl 2018 without modifications? Is the src the same as the xrc but with bigger bullbar?

@slavakuznetsov4966 8 месяцев назад

Factory fogs are crap - even LEDs. But my GoRhino steel bumper is about 60 lb, but this thing is 150 at least.

@tomdon5528 8 месяцев назад

I bought this bumper second hand for a steal. Unfortunately it did not come with the lower brackets. Can I install without them? Or will Smittybilt send me a set

@therealbouncertv 4 года назад

How would people put a license plate on aftermarket bumpers like this for instance any ideas?

@brianfolkman3315 4 года назад

Plenty of options if you search for hawse fairlead license plate brackets. Several manufactures make them to install behind the hawse or roller fairleads.

@bobnoblesjr.465 2 года назад

There are aftermarket kits that allow you to install the license plate, either by snapping it into the hawse fairlead,(if you're using synthetic line, or a flip up style if you have roller fairlead when using steel cable.

@JoshDooG 4 года назад

I want this bumper ...will it also fit a 2020 JL rubi. ????

@extremeterrain 4 года назад

This bumper will definitely fit a 2020 Rubicon! -Zach

@JoshDooG 4 года назад

@@extremeterrain will the GEN 1 also fit the new JL ??? i see their considerably less.

@millermichael2755 3 года назад

Did you guys lift this Jeep? Could you tell the tire size and rim offset please?

@extremeterrain 3 года назад

This Jeep isn't lifted actually! The wheels and tires are 285/70R17 Falken Wildpeak AT3's mounted on 17x9 Mammoth D Window Steel Wheels. They have a -6mm offset with 4.7" of backspacing. See the following link! www.extremeterrain.com/mammoth-jeep-wrangler-jl-d-window-black-steel-wheel-17x9-j100952-jl.html -Zach

@millermichael2755 3 года назад

@@extremeterrain Thank you very much