Jeep Wrangler New Auxiliary Battery Install

Подписаться 24 тыс.

Просмотров 38 тыс.

50% 1

Learn how to install a new 12V auxiliary battery in a 2018 Jeep Wrangler. We’ll show you how to replace/change/remove with simple tips and tricks to help get you started!
Although this video may provide you with the basic procedures, we recommend that you check with the vehicle manufacture's step by step instructions found in service/repair manuals for the vehicle you are working on because some year/model procedures may be different than the vehicle in this video.
Click this link to determine which battery your vehicle needs: www.autobatteries.com/homepage
The use of a memory saving procedure will keep the vehicle's computers memory's alive during the battery replacement procedure. Referring to our Memory Saving video will provide you with various memory saving procedures that can be used according to vehicle manufacturer's requirements. • Vehicle Memory Saving ...
Some late model vehicles must have the 12 volt battery registered with the vehicle's Battery Control Module or Computer after replacement. See these videos on Battery registration and coding for more details on the procedures at • Battery Registration w... & • Battery Registration &...
Always wear safety glasses and gloves when working with or near batteries.
Intro: (0:00)
Getting Started: (0:15)
Removing Tire & Pannel: (1:11)
Remove Negative Cable: (3:00)
Remove Positive Cable: (3:57)
Remove Old Battery: (4:17)
Reuse Threaded Stud Posts: (4:22)
Install New Battery: (5:07)
Reinstall Positive Cable: (5:13)
Reinstall Negative Cable: (5:57)
Reinstall Pannel & Tire: (7:12)
Outro: (9:21)
Subscribe!: (9:30)

Авто/Мото

Опубликовано:

16 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 26

@jeepcam2692 6 месяцев назад

Great video❤

@TheBatteryShop 6 месяцев назад

We are glad you enjoyed our video!

@scottdavenport4901 7 месяцев назад

Thanks for this video, very helpful! I looked at some vids that had you “just pull off the fender”. I tried that and that thing was not going to pop off. My jeep is 3 1/2 years old, and those clips are now very brittle. Did have to buy a rivet tool though. Thanks again!

@TheBatteryShop 7 месяцев назад

Hi - You’re welcome and thanks for watching and sharing your experience!

@jaymichael5370 2 месяца назад

Do the threaded stud posts fit all Aux 14 batteries? The pics on some of the aux 14 batteries don't seem to show that.

@josecabral5774 Год назад

That's nise

@TheBatteryShop Год назад

Hi - Thanks for watching and sharing your opinion!

@twohandsandaradio 6 месяцев назад

Interesting they put the aux battery so low in the engine compartment. Kind of makes water fording a bad idea?

@DanBlackRacing 5 месяцев назад

Exactly what I was thinking. We are destined for 18" feet of water this year on a off road trip this summer. Now I;m hesitant...

@sebiues_1614 3 месяца назад

Maybe you can just pull the fuse (43 I Believe), then it shouldn't be a problem for the system at least @@DanBlackRacing

@ahmedmohammed4291 8 месяцев назад

Is the large primary battery connected or disconnected when changing the auxiliary battery? If you disconnect it, does it affect the programming?

@TheBatteryShop 8 месяцев назад

Hi - Thanks for watching! We left the main battery connected during our auxiliary battery replacement without loss of vehicle computer memories. We suggest that you check the vehicle owner’s manual or a service/repair manual for your particular vehicle about battery registration to be sure.

@sunnydayincali 9 месяцев назад

Will the Stop Start Not Ready Battery Charging sign on Dash automatically turn off once replaced?? (2019 Jeep Wrangler JL Unlimited Sport)

@TheBatteryShop 9 месяцев назад

Hi - Thanks for watching! We think so after the battery management system recognizes the proper battery performance. We suggest that you check the vehicle owner’s manual to be sure.

@johnmccall2413 8 месяцев назад

If you have JL the 2.0L and turbo charger you don’t have an auxiliary battery. If you get message “Aux switches not available battery charging” you just need to replace your regular battery.

@TheBatteryShop 8 месяцев назад

Hi - Thanks for watching and sharing your information.

@Justinrussophoto Месяц назад

That's not true. Unless you have the etouque the 2.0l still uses an aux battery .

@Eric-Franks Год назад

No cam unit required or disconnecting the main battery

@TheBatteryShop Год назад

Hi - Thanks for watching! We didn't disconnect the main battery so it will keep the memories "alive" during the auxiliary battery replacement.

@christian1316 11 месяцев назад

Why would one have to change this battery? If the start stop function comes on the cluster? Or if the car hesitates to start?

@TheBatteryShop 10 месяцев назад

Hi - Thanks for watching! You would only have to replace that battery if it fails a test. The auxiliary battery is basically used to keep the vehicle’s system voltage from dropping below a specified level during engine start so thinks like computer, gps, steering angle, radio stations and other systems or user presets don’t reset.

@andrewhadden9667 10 месяцев назад

If you're having issues with the ESS (Electronic Start Stop), the aux battery is probably dead. Over time, it will drain your main as well. It's best to replace both batteries.

@KryptoDemon 10 месяцев назад

Wait. Are you actually trying to sell this as a better way? Why unscrew a PCM board and flip up the battery when you could easily pull out the transmission , seats and the firewall to get to it....WTF?

@TheBatteryShop 10 месяцев назад

Hi - Thanks for watching! Nope, just a different way for folks who are uncomfortable with with removing connections from computers.