Jeep Wrangler YJ Ignition Lock Cylinder Replacement

Подписаться 39 тыс.

Просмотров 31 тыс.

50% 1

Replace the Ignition Lock Cylinder in a Jeep Wrangler YJ. It isn't too difficult to do as long as you have the right tools!
Products used to do this project. Power Addicts earn a small commission from the sales generated by these links at NO ADDED COST to you. Thanks for your support! Have a great day!!
Jeep Ignition Lock Cylinder: amzn.to/34lxmkr
Car Steering Wheel Puller Compressor Remover Set (what I should have bought) :amzn.to/34t8A1L
If Power Addicts has ever helped you and you wanna contribute in some way, here are some links that can help make that happen. This here is an Amazon link that gives Power Addicts a small commission. Using this link costs you NOTHING more. amzn.to/39XSTTO
The Paypal link is a simple way to make a simple donation if you want. Thank you for hanging out!! www.paypal.com/paypalme/Power... Thank you very much!! Have a great day!!
Fix Jeeps website: www.fixjeeps.com/
RU-vid Home Page - / poweraddicts
Free Amazon Prime Trial (affiliate) - amzn.to/2nknmBE
Equipment used to create videos:
Canon Rebel EOS SL1: amzn.to/2q7AEDf
Canon EF-S 18-55mm f/3.5-5.6 Lens: amzn.to/2q7tb74
Sony ActionCam AS30: amzn.to/2pm7x1v
Sony HandyCam HDRPJ440: amzn.to/2pB0aQ6
ION Air Pro: amzn.to/2qtyQXY
Various Camera Tripods: amzn.to/2r3OjLh
Dell Latitude E7450 Laptop: amzn.to/2r23rYV
$ave Money! : • Save money on Jeep par...
Power Addicts Playlists
Jeep fix & Repairs - • Jeep fix and repairs.
Jeep Sensors - • Jeep Sensors
Jeep YJ mods - • Jeep YJ mods
Wrangler YJ Maintenance - • Wrangler YJ Maintenance
Jeep Fun - • Jeep Fun -
Wrangler YJ Drive shaft repairs - • Wrangler YJ Drive shaf...
Tools, mods & Creations - • Tools, mods and creations
Automotive Tool Tips - • Automotive Tool Tips
Motorcycle Playlist - • Motorcycle Playlist
Mustang GT - • Playlist
#jeepyj #yj #jeeplife #poweraddictscrew #jeepwrangler #poweraddictsyoutube #jeepwrangleryj #jeepwranglertj

Авто/Мото

Опубликовано:

28 май 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 58

@Poweraddicts 3 года назад

Jeep Ignition Lock Cylinder: amzn.to/34lxmkr Car Steering Wheel Puller Compressor Remover Set (what I should have bought) :amzn.to/34t8A1L Products used to do this project. Power Addicts earn a small commission from the sales generated by these links at NO ADDED COST to you. Thanks for your support! Have a great day!!

@fgjf1079 27 дней назад

Just stopping to say thanks. I just switched mine out. By the way, the second tool made the job so much easier- I would have been fighting it, and saying a few F-words, without it. Thanks again

@scottiredale81 2 года назад

Anyone who’s breaking this dudes balls for using that tool is brain dead. Why wouldn’t you? So you can say you did it without it? Wow. You’re a hero. Tools are there to make jobs EASIER. And a lot of times it helps prevent the stupid stuff from happening.

@WillJedi71 Год назад

I removed mine without (but it was a bit of a PITA), but only because it was so late at night that all the parts stores were closed. Anything that makes a job easier or improves success is a good tool IMHO

@robertperrin4070 18 дней назад

Your video saved me! My yj has been acting up a bunch lately. Might be TJ time soon for me

@JensenVideoSolutions 4 месяца назад

Thank you for this, someone tried to steal my Jeep this week… with this video I was able to do this myself for less than $150. Now if it happens again I know what to do. The tools are cheap, the parts cheap. They jammed a flat screw driver into the cylinder, key no longer worked.

@CvilleRic 8 месяцев назад

Such an amazing help!!! Thank you for posting. I lost the keys to my 1995 YJ and no other options worked. Except this-whoop whoop. The ignition must have been swapped out before, because the door & glovebox key the dealer cut for me from the VIN did not work. Thanks again.

@samlemma 2 года назад

Wow ----- I'm having horn issues on my 95 YJ - have not been able to fix it yet - but this video gives me so much info as to how to get inside the steering. I have not seen anyone online going into this much depth and explanation. I'm blown away. Thank you so much!

@Poweraddicts 2 года назад

You are welcome! Hope it helps

@johngordon6764 Год назад

I was able to make a tool to compress the plate. Started with a piece of sheet metal 4”x1.5” Drilled a hole in the middle to slide over steering shaft Drilled one hole on either side and slide some toggle bolts through it. Slide “tool” over steering shaft Loosely installed steering wheel bolt Tightened toggle bolts against plate compressing spring. Hope this helps someone

@davidshettlesworth1442 2 года назад

Thank you for this very helpful video. My jeep yj has become less scary to tackle repair projects thanks to you. Carry on Sir.

@MrKim-kv2vv 3 года назад

With so many videos on YT on this subject, you did a very good job in explanation and pictures! 🙋🏼

@Poweraddicts 3 года назад

Glad you enjoyed the video and found it helpful!

@markwells8781 3 года назад

Great video as always !!! LOVE the shifter knob !!!!

@Poweraddicts 3 года назад

Thanks 👍 Glad you enjoyed it!! Here it is if you want one: amzn.to/3vxNMSO

@roadstergarage9914 3 года назад

Got a 94 recently, subscribed immediately, great content! Will follow your steps to perform all the basic maintenance.

@Poweraddicts 3 года назад

Thanks for subscribing. Hope the channel serves you well!

@barryweisfeld628 3 года назад

Great video Chuck,. As always great information to keep your rig up and going,

@Poweraddicts 3 года назад

Thanks! Glad you enjoyed it!

@PaulinaRudy 2 месяца назад

First of all, thank you very much for your video, it was super helpful. Second, any idea why my Jeep won’t crank? When attempting to turn on ignition doesn’t go further and break light on dashboard comes up. (YJ 92)

@jimmymckeehan849 2 года назад

Best detail yet. Thank you

@Poweraddicts 2 года назад

Glad it was helpful! You are welcome!

@robertperrin4070 17 дней назад

I am reassembling and the plate shown at 10:12 spins when the ignition pin drops. Any suggestions on how to get it to stay put?

@haydenrice9485 Год назад

Thank you!

@Poweraddicts Год назад

You're very welcome! Hope the video helped!

@TonyReedurbanhow2do Год назад

Thank you

@Poweraddicts Год назад

You are welcome!! Thank you for checking out the video.

@TheoneDragon51 3 года назад

Wow a lot to that. Good video.

@Poweraddicts 3 года назад

It is kinda buried in there!!

@kidlolek 2 года назад

Thanks!

@Poweraddicts 2 года назад

You are very welcome. Thank you very much for the Super Thanks!!! It is very much appreciated. I hope the video helped you!

@davidroberts3489 2 года назад

What would make the lock cylinder stiff to turn, to the point you have to physically back it off from the crank position?

@yazming1720 2 года назад

How do you align the rod from the cylinder to the ignition switch?

@mylesross5712 2 года назад

Great video. Did you get the replacement switch from the auto parts store?

@justincisson4702 2 года назад

Hey bud. Turns out some jeeps. Have a threaded locking nut instead of that tab you push in to release the cylinder

@Poweraddicts 2 года назад

Good to know!! Thanks for taking the time to leave a great tip!! Have a great day!

@TheoneDragon51 3 года назад

Your skull do you have a threaded nut insert in it or just the rubber piece that comes in it? I need to figure a better way to keep it from working loose over time.

@Poweraddicts 3 года назад

Its an actual shift knob. Here is a link to it amzn.to/3vxNMSO

@TheoneDragon51 3 года назад

@@Poweraddicts So is mine, it just came with a rubber boot thing and a compression type of lock. It just works it's way loose after time.

@edrefeen4006 8 месяцев назад

Where did you get the new cylinder from. I can’t find one anywhere around here.

@Poweraddicts 8 месяцев назад

Here ya go: amzn.to/40sdOay

@neall6954 Год назад

Insert your key turn it slightly back towards accessory and pull the cylinder out. Takes about 10 seconds to change your lock cylinder

@dwaynelasater2350 Год назад

Would that work with a 1995 jeep yj ?

@neall6954 Год назад

I have a 95 and yes it works

@CvilleRic 9 месяцев назад

I don’t have a key. So that’s not an option for me, correct. I think I have to for this disassemble route, correct?

@neall6954 Год назад

As long as your key can be inserted in the cylinder you don't need to remove any of the steering wheel

@miekolock4060 2 года назад

I didn’t catch the year on this yj. This one is the early-mid 90’s. Not the 87-90/91 one right??

@Poweraddicts 2 года назад

The one in the video is a 91

@CvilleRic 9 месяцев назад

Is this the same for a 1995 YJ? Thanks so much for the video by the way.

@miekolock4060 9 месяцев назад

@@CvilleRic if it looks the same it should be. I think after this body style they don’t make em with the steering columns like that if at all.

@condor-6-one83 3 года назад

My horn used to work but I took it off for some reason a few months back and I put it back together and have no horn. Oh well

@Poweraddicts 3 года назад

I was surprised mine worked 🤔😀

@dirtydish6642 3 года назад

The video I'm waiting for is : *Jeep Wrangler YJ - Wallet Broke*

@Poweraddicts 3 года назад

Once upon a time it was. Its good now. 👍

@jkgkjgkijk 5 месяцев назад

Nightmare job

@neall6954 Год назад

You don't have to take the steering column apart you can remove the lock cylinder with the key

@MrNicholasnickleby Год назад

Is this the case? Because I see a lot of videos removing the gut like this

@CvilleRic 9 месяцев назад

That’s the ‘key’ point I think. I don’t have a key and I’m the dipshit that lost it🙄