Тёмный

Jeep YJ Leaf Spring Install:1992 Jeep Wrangler YJ 

JeepSolid
Подписаться 81 тыс.
Просмотров 77 тыс.
50% 1

Rugged Ridge 2.5" Lift Kit I plan to install soon:
amzn.to/3hytlPv
Proudly sponsored by Enginetech enginetech.com/
Engine rebuild kit I used on my 4.0L rebuild: amzn.to/2WuNdbu
If my videos have helped you save some money , and you would like to give back to the JeepSolid Garage, consider joining my Patreon page!! There's no obligation though. I am happy to help others out, but it does take a lot of my time.
/ jeepsolid
👨‍🔧 A few of my favorite tools 👇
Pro-Lift 3ton Jack Stand: amzn.to/2RU6rGa
Pro-Lift 6ton Jack Stand: amzn.to/33R9epj
3 Ton Jack: amzn.to/2S5obyJ
Milwaukee 3/8 Cordless Ratchet: amzn.to/39x7WAO
Extendable Socket Wrench: amzn.to/2LJNV2k
1/2" Craftsman Impact Driver. amzn.to/2fTDoTR
24" Breaker Bar: amzn.to/2RnuSNC
Craftsman Torque Wrench: amzn.to/2Wj7JiD
Dewalt 1/4 impact driver: amzn.to/2GYEJ4w
Be sure to get the kit with 2 batteries. You'll be glad you did!
Craftsman 165 Mechanics Tool Set: amzn.to/2GXRlIg
Excellent tool set that will last a lifetime.
Oil filter Wrench: amzn.to/2IbgT9e
Large Capacity Oil Drain Pan: amzn.to/2OjqXjh
Subscribe: / jeepsolid
Follow Me!!
Facebook: / watchjeepsolid
Instagram: / jeepsolid
Twitter: / dale_jeepsolid
Professional business inquires: email me at dale@jeepsolid.com
#jeep #jeepwrangler #jeeprepair
Some of the links provided are affiliate links, where I earn a very very very small commission for directing you to the website. If you make a purchase, it does not increase your cost, but helps me fund my channel. Thanks for watching JeepSolid. I am not a certified mechanic, just a hobbyist who enjoys working on Jeeps.

Авто/Мото

Опубликовано:

 

31 дек 2020

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 129   
@JeepSolid
@JeepSolid 3 года назад
Rugged Ridge could not give me a torque spec for the bolts. UGH.. come on RR.. anyway, I ended up torqueing the shackle bolts to 55ft lbs. This is not factory recommendation, but I could not find out what that was. I came up with 55 from my own research. If you find something better, let us all know!! Thx :)
@Smarterthanyou-mthrfkr
@Smarterthanyou-mthrfkr 2 года назад
Specific torque wrench setting: pft, pretty fkn tight.
@JamesVastbinderJr
@JamesVastbinderJr 2 года назад
85ft-lb - 95ft-lb is what was on my documentation.
@Smarterthanyou-mthrfkr
@Smarterthanyou-mthrfkr 2 года назад
I have never bothered torquing spring bolts, pft has always worked(pretty fkn tight”:).
@markthomas4083
@markthomas4083 День назад
Thank you for the tips. Would’ve loved to see the Jeep after the install was completed.
@benfernandez8363
@benfernandez8363 2 года назад
Hey Dale, these is absolutely helpful video for me, I have a 1993 Jeep wràngler and I needed help to replace the leaf springs. So big thanks for your video.👍
@bruceroozdar9156
@bruceroozdar9156 2 года назад
Excellent video! I’m looking to install rough country 2.5” lift kit and springs on a scout 800 and I found your tips to be super helpful. Thank you!
@tarachamblin9633
@tarachamblin9633 8 месяцев назад
Your videos are the bomb!! I'm a woman & I've heard repeatedly that fixing my Wrangler isn't worth it bcuz I drove my baby Rusty really hard & broke my leaf spring & watching your video just shows me what mama always taught me. Where there's a will there's a way. So thank you.
@hpblack1953
@hpblack1953 8 месяцев назад
I'm late for class here, but I have always found leaving PB Blaster to soak overnight on nuts/bolts will save me teaching new cuss words to the neighborhood kids.
@chrishester3738
@chrishester3738 3 года назад
Doing this tomorrow on my '89 and wasn't sure on a few points, thanks for posting!
@KINGandWINNER
@KINGandWINNER 2 года назад
dude though you did struggle you do a very educational video that has a lot of information. I will watch over and over.
@chineserocks77
@chineserocks77 Год назад
I'm gonna be trying this soon on a 1995 yj. This video definitely helps. Thank you!!!!!
@Scott-kh4pw
@Scott-kh4pw 3 года назад
Great video. This is the best Jeep tutorial on RU-vid. You’ve inspired me to buy a Jeep!
@trevorjenglish
@trevorjenglish 3 года назад
Literally was just wanting to replace my leaf springs and couldn’t find a video from you about it. Incredible timing and great video!
@JeepSolid
@JeepSolid 3 года назад
Glad I could help!
@RandyMKE
@RandyMKE 3 года назад
SAME!
@JamesWestborn
@JamesWestborn Год назад
I always spray paint everything black once in there. Drum, frame, etc
@Noslime
@Noslime Год назад
This brings back painful memories of replacing the suspension components on my Subaru Forester. The rear passenger side I went and bought biggest Milwaukee 18 V half-inch impact I can get. No torches, no hammering. I put some PB blaster on it and it either came off or broke off. Screw hours of tedious work.
@jesse7769
@jesse7769 2 года назад
good video, decided to replace my gas tank skid plate at the same time I lift my YJ!
@bluewookie41
@bluewookie41 Год назад
When a bolt finally flies out like that I recommend executing a "Dean Scream" in celebration of your triumph.
@DaveBosze-mj5tz
@DaveBosze-mj5tz 6 месяцев назад
I Feel your Pain ! Just went thru all that myself . Lol
@mikej1389
@mikej1389 3 года назад
I have had a hand from my little buddy jack a few times especially when doing the leaf springs on my YJ
@slashfromtx2845
@slashfromtx2845 2 года назад
Dude You are the Bomb!!!!💣💣 Thanx for this video. I'm getting ready to do this exactly to my CJ5!!! 🤘😝🤘
@sdjb111
@sdjb111 Год назад
Oh Man. I would have the FIRE wrench in my hand ASAP. Nice Video my Friend. I have a 92 YJ, Yea you know.
@josephkeele8999
@josephkeele8999 2 года назад
I cut mine off with my off with my Dewalt saber saw. Much easier. Love your videos. I have a 1992 also and I went with a Skyjacker lift. . Thank you I enjoy them all.
@francisbrackney2061
@francisbrackney2061 3 года назад
Hey Dale. I have noticed that on a lot of different rubber bushings, that they get soft or mushy over time from having grease on them. So I often use silicone brake grease instead of bearing grease. The silicone grease doesn't soak in to the rubber. And it works excellent for repelling moisture. ..
@typhurious4971
@typhurious4971 3 года назад
Just ordered my rough country 2.5 in lift kit to replace my old sagging 91 yj suspension. This is very helpful, thanks Dale!
@Bigbeachbitch77
@Bigbeachbitch77 2 года назад
I have been researching 2.5" lift kits and found alot of negative reviews on rough country kit (I have 1995 yj) how is yours on street, trails...?
@typhurious4971
@typhurious4971 2 года назад
@@Bigbeachbitch77 feels a bit stiffer but overall I can't complain. It still rides like a leaf sprung jeep and for the price it was worth it for me. I do have a heavy smittybilt bumper/tire carrier and had to add 1inch boomerang shackles in the rear to lvl it out. Havent gone to hard on it yet either, Hope that helps 🙏
@ghostv9605
@ghostv9605 9 месяцев назад
Thank you for this video and thank you for showing the struggle, i hate videos that make it seem like a quick job and it ends up being hell. haha
@kareemvitar6645
@kareemvitar6645 3 года назад
I am a yj lover,and wish own one someday and start repair it myself and dissemble its parts one by one.because i love yj and love mechanics.
@tonib9703
@tonib9703 2 года назад
Great video, Intellitronix makes a direct fit LED gauge cluster for the CJ, 92-95 YJ & TJ
@adamd7998
@adamd7998 2 года назад
Thank you for this video. Note to anyone else attempting this. Be patient, have lots of PB Blaster, a cutting wheel, a saws all with carbide tips, a breaker bar, floor jacks, jacks stands, and did I mention, a lot of patience. I had to walk away and come back to this project several times. It was not a two hour install like the box said.
@dillonkuchinski2260
@dillonkuchinski2260 20 дней назад
I’ve always said that it takes the amount of time on the box when the vehicle is new, once it gets old it takes longer
@davidjessee7701
@davidjessee7701 3 года назад
I have a 92 yj... reverse the front shackle position really helps the handling on the road, without changing spring articulation.... in other words make the front spring mount solid and the shackle at the back of the front spring....
@tdck6186
@tdck6186 3 года назад
I'm glad you are doing this now. I get to see what I'm gonna get into this spring.
@JeepSolid
@JeepSolid 3 года назад
Oh man! Buckle up. Haha 🤣
@tdck6186
@tdck6186 3 года назад
@@JeepSolid I have no shop, so it's me and the gravel driveway. Fun for all. 😂
@brianwilliams8362
@brianwilliams8362 3 года назад
*spring* I see what you did there Brilliant!
@RandyMKE
@RandyMKE 3 года назад
THANK YOU! I am.............attempting this now.
@BuckarooBanziBMF
@BuckarooBanziBMF 3 года назад
That's exactly what happened to my rear leaf bolts. They rusted to the spring bushing insert. I carefully cut mine out with an abrasive disk.
@J-W.-
@J-W.- 3 года назад
Just did my rear leafs on my XJ Dale so I feel ya!
@JeepSolid
@JeepSolid 3 года назад
Oh man! What a pain. Haha!
@JimmyHinton
@JimmyHinton 9 месяцев назад
I put 2" lift shackles on my jeep wrangler and I didn't have to cut the bolt off. I loosened the gas tank enough pushed forward a little bit and it slid out without cutting it.
@eddiecannon3505
@eddiecannon3505 4 месяца назад
Thanks for the video!
@errhka
@errhka 3 года назад
Looks like a great job for my mechanic!
@JeepSolid
@JeepSolid 3 года назад
Yeah. Huge pain, but got it done
@mvandepeer9836
@mvandepeer9836 3 года назад
When those leaf spring bolts won't budge, break out the side grinder with a thin cut-off... had to use that on 5 of 8 l.s. bolts.
@franciscastiglione3191
@franciscastiglione3191 3 года назад
Please do let us know what RR says about torque specs for the boomerangs! Don’t forget!
@larrydriemel6242
@larrydriemel6242 3 года назад
a 1/8" zip wheel on four 4" grinder, cut through the old bushing and bolt between the spring hanger and both sides of the spring, go buy new bolt, install new spring and new bushing, just be careful controlling your cutting wheel. saves sooo much blood sweat and tears. there is enough room, but have a steady hand.
@davidjessee7701
@davidjessee7701 2 года назад
Removing the front and the back track bars..for a softer ride and less darting
@FlawedOffroad
@FlawedOffroad 3 года назад
pb blaster=nectar of the gods!
@FlawedOffroad
@FlawedOffroad 3 года назад
dont go to 55ft lbs on the center bolt. i do about 35 with nylock nuts on the main bolts and I dont even run the center bolt but if I did it would get the same 35. YMMV. IMO that center bolt is just flex inhibitor
@MajorWeakness
@MajorWeakness 3 года назад
Thanks for the video. About to do this on my XJ. Did they ever get back to you with the torque specs?
@chadpittman6614
@chadpittman6614 2 года назад
Hey Dale absolutely love your videos. New subscription here. Taking on complete tie rod replacement because of your videos and I appreciate it. I have a question concerning boomerang shackles..... I have a 95 YJ 4.0. I have a 4" RC suspension lift with a 1" TC drop. Im wanting to put on some boomerang shackles on all 4 springs but was curious if this would mess up any steering angles or driveshaft angles?
@francisbrackney2061
@francisbrackney2061 3 года назад
Just go by the diameter and grade of your bolts for torque. 9/16" diameter Grade 8 I looked it up, coarse is 115 ft lbs. And fine is 129 ft lbs.
@isshinryu11
@isshinryu11 3 года назад
Brother says acetone and brake fluid works better than pb buster. Also, saw another video that shows if you swing rear leaf spring all the way to the back it will clear gas tank. Starting this project soon. Do you have video of front leaf spring removal /install?
@dadteaches
@dadteaches 3 года назад
:) My front bolts on my shocks, front and rear, took me about 15 minutes of heat on them, until everything was red, then a few minutes of impact driver....then it became a sparky mess that finally broke free.
@felixmikkialmosttoasted3911
@felixmikkialmosttoasted3911 3 года назад
My uncle burnt his car down doing that. Not exactly sure if he was cutting or heating
@dadteaches
@dadteaches 3 года назад
@@felixmikkialmosttoasted3911 I was just heating, but I also had an extinguisher close enough...I thought about that when the rubber was smoking up
@cdeprima1209
@cdeprima1209 10 месяцев назад
Apply PB Blaster or penetrating oil 24 hours in advance. Use Red Rustoleum primer to reduce the rust; do this all over for light surface rust; it solves the problem of rust; do it periodicaly!
@nathanteig7108
@nathanteig7108 3 года назад
My rear left spring occasionally makes a clink sound and the whole body of the jeep shifts over a little when it happens, I think one of the leafs is slipping over another and gets slapped back in when I make a hard turn. Do I need a new leaf? There is visually nothing wrong with them, I clean them regularly and they have almost 0 rust.
@wesbarcus3761
@wesbarcus3761 3 года назад
Good time to change u bolts as well,they get rusty and tired. They stretch as well. Repair the frame?
@colin5064
@colin5064 2 года назад
Hi, like to ask what length of metal cutting blade did you need on the saw 6" or larger?
@richdatsun8755
@richdatsun8755 3 года назад
Try using aerokroil penetrating oil instead of PB blaster. You will thank me later. I normally add some heat (propane or mapp gas) then spray on aerokroil wait a few minutes then “bang”they come off. Works great!
@JeepSolid
@JeepSolid 3 года назад
I'll have to pick some up and give it a try 👍🏽
@Ikillintel1
@Ikillintel1 3 года назад
I like both, but you're right Aerokroil is good stuff.
@xjyj2248
@xjyj2248 2 года назад
Hey Dale, I'm going to be changing out front and rear leaf springs, what size bushing are needed for the frame of the YJ that bolts to the shackle, the one you had to drill out? Please help I need to order the right bushing for front and back
@41GarageandGrill
@41GarageandGrill 3 года назад
How were they driving that thing! I can't believe the way it dug into the frame
@Zoofactory
@Zoofactory 3 года назад
NOTE TO RUST BELT: Soak that for two weeks if you can boys!
@dougharlow6037
@dougharlow6037 Год назад
Dale, I have a question, how to remove my hardtop rear wiper motor COVER 1991 YJ hardtop. Thanks
@bob4003
@bob4003 8 месяцев назад
I have a 1990 with stock leafs. Are they supposed to be streight with no bend ?
@sbwal2502
@sbwal2502 3 года назад
Hey Dale, do you have to change the front leafs as well? Great job! Keep up the good work. Stay safe out there!
@JeepSolid
@JeepSolid 3 года назад
No. Not changing them right now. but maybe a 2.5" lift in the future..??
@clwilli
@clwilli 3 года назад
Did you jack the YJ up in the rear on the differential...just for future reference,
@__Chronic_Chris
@__Chronic_Chris 3 года назад
I think the leaf spring shackles are about 95 both top and bottom
@overlandtoshore
@overlandtoshore 3 года назад
This was a pain in the rear when i put my lift on earlier this year. My suggestion is letting the next guy do these if you dont absolutely have to.
@JeepSolid
@JeepSolid 3 года назад
yeah. Was a huge pain. Had to get it done because of the broken leaf spring.
@dmhoffmanntrucking
@dmhoffmanntrucking Год назад
I just cut all my bolts and used all new hardware , dropped my install time drastically
@ttereick
@ttereick 3 года назад
Do you have the part numbers for this kit?
@seeya5176
@seeya5176 3 года назад
Get a Milwaukee fuel cordless impact. Would have ate those hanger bolts right off
@JimmyHinton
@JimmyHinton 2 года назад
Be careful replacing them leaf springs. I learned that after fractured my finger and out of work for a month.
@raymond80hr
@raymond80hr 3 года назад
so your saying start with a cut off wheel.
@scottsmith6571
@scottsmith6571 2 года назад
Rough country better ?
@AstanaxKnight
@AstanaxKnight 3 года назад
I know I haven't seen you in quite a while. You got the Ned Flanders look going on there. ;) Anyway, I'm hopeful to learn from your mistakes when I have to replace any future leaf springs.
@JeepSolid
@JeepSolid 3 года назад
Haha! Thank you
@AstanaxKnight
@AstanaxKnight 3 года назад
@@JeepSolid You're welcome. Oddly enough, there is a heavy metal band called "The Ned Flanders" who dress like the Simpsons character. Anyway, I was watching your video because I traded in a 2017 Jeep Renegade for a 2010 green Jeep JKU for my wife. I was making a sunshade for it today. I bought 4 feet of 6 foot wide green Easy Gardener sunshade from Lowes, as well as nylon webbing and ball bungee cords from Walmart. I was hand stitching the bungee cords to the nylon webbing and sunshade with upholstery thread while watching your video. I made a similar sunshade for my Jeep YJ using the red sunshade fabric from Lowes over a year ago.
@JeepSolid
@JeepSolid 3 года назад
Wow! That is cool. Sounds like a nice shade
@yermoffroad
@yermoffroad 3 месяца назад
Cut the U bolts off like the rest of the world haha
@cameronchrestman46
@cameronchrestman46 3 года назад
You need to torque the rear bolts to German torque specs which is gutentite lol 😆
@kennethhudson8013
@kennethhudson8013 3 года назад
You need a goatee to go with the stash
@charleskuykendall9625
@charleskuykendall9625 2 года назад
If you get a pneumatic chisel and some punch bits it will drive it right out.
@danhambrick6331
@danhambrick6331 3 года назад
Well that looked easy enough...😂😂😂
@JeepSolid
@JeepSolid 3 года назад
Oh man what a pain! Haha
@boshek9455
@boshek9455 2 года назад
the best tool for the front bolts...........a reciprocating saw, then replace the bolt with a new one. Two minutes.
@Ikillintel1
@Ikillintel1 3 года назад
3:03 HAHA!
@CountryBoyWithAFord
@CountryBoyWithAFord 2 года назад
Try some seafood deep creep makes blaster look like wd40
@krod2162
@krod2162 5 месяцев назад
Always before I work on anything I'll let the penetrate soak overnight
@connor3485
@connor3485 3 года назад
I miss the Jeep Solid intro!!
@JeepSolid
@JeepSolid 3 года назад
Haha! I’ll bring it back soon
@kennethhudson8013
@kennethhudson8013 3 года назад
Rear disk brakes in the future?
@JeepSolid
@JeepSolid 3 года назад
Probably not on this project.
@kennethhudson8013
@kennethhudson8013 3 года назад
If first you don't succeed, HIT IT WITH A BIG WHAMMER!
@JeepSolid
@JeepSolid 3 года назад
Yes!! Need a big hammer for this job. Haha
@LukeHopkin
@LukeHopkin 3 года назад
Nothing easy on that one. I'd have lost my cool. Good on for keeping it together.
@JeepSolid
@JeepSolid 3 года назад
There were times of laying on garage floor contemplating life decisions
@LukeHopkin
@LukeHopkin 3 года назад
@@JeepSolid Well that is better than throwing a wrench across the garage!
@cliffdaddy126
@cliffdaddy126 3 года назад
Torque to 6 ugga duggas
@JeepSolid
@JeepSolid 3 года назад
Haha! sounds about right.
@your2nd
@your2nd 3 года назад
Hope you didn't kill the cat when you shot that bolt out !
@JeepSolid
@JeepSolid 3 года назад
Haha! It sure came out with some POP!
@wb4h
@wb4h 2 года назад
Air hammer
@ceaserbriones5337
@ceaserbriones5337 3 года назад
The bolts from hell...I rather just pay a shop to do it..
@danthompson1467
@danthompson1467 3 года назад
You need to quit using deep sockets first off and second get the dam torch out
@JeepSolid
@JeepSolid 3 года назад
Don’t have standard 1/2” sockets. Only deep set. I’d like to get some in the future 👍🏼 Using what I have for now
@KingsChevyShow
@KingsChevyShow 3 года назад
Wait why no deep well?
@JeepSolid
@JeepSolid 3 года назад
Deep set create a slightly worse angle in this application. Would be better to have the arm of the wrench closer to the bolt head
@KingsChevyShow
@KingsChevyShow 3 года назад
@@JeepSolid ahhh true but it was more so aimed at the guy treating you like an amateur! Thank you for all the great content !
@bradfaulkner971
@bradfaulkner971 Год назад
Cut it off. Your working too hard. Great video
@cuttheloop
@cuttheloop 2 года назад
that mustache tho....
@JeepSolid
@JeepSolid 2 года назад
I know!! Wasn’t it amazing 🤩 Haha
@leskobrandon538
@leskobrandon538 3 года назад
Plasma cutter
@JeepSolid
@JeepSolid 3 года назад
haha!! That'd get it done.
@chisholmranch1
@chisholmranch1 3 года назад
Throwing your hat like that and hooking it was a once in 10 shot. I bet you a penny that you can't do that again in one shot.........................................
@beirnefarm8988
@beirnefarm8988 3 года назад
Why the boomer get shackles?
@cranberrysuit7114
@cranberrysuit7114 Месяц назад
40 pounds
@-_-John-_-
@-_-John-_- Год назад
Please chill with the multi angle editing. Gonna give someone a seizure.
Далее
COMPLETE Tie Rod Replacement: How To Jeep Wrangler YJ
14:21
How To Install New Leaf Springs - Rough Country
11:19
Просмотров 619 тыс.
Hamster Kombat 20 July Mini Game
00:13
Просмотров 10 млн
Beautiful sport😍
00:20
Просмотров 168 тыс.
Jeep YJ gets new shackles and little more lift
11:40
Просмотров 50 тыс.
Shop Talk: Spring over vs Spring under??
19:59
Просмотров 138 тыс.
Installing AC in my old Jeep YJ - Jeep Air Kit
33:01
Everything Wrong With My 1992 Jeep Wrangler YJ! 😫
15:37
Please DO NOT Buy a Jeep (Unless It Has This Engine)
10:04
How to Replace Leaf Springs and Lift your Truck
17:57
Upgrading to LED headlights on my Jeep YJ
7:35
Просмотров 29 тыс.
Reaksiyasiga qoyil.
0:12
Просмотров 2 млн
😳 ВЫЖИВАЮ В ДРИФТ МАШИНЕ
0:39
Просмотров 2,7 млн
Тест Подвески БМВ
1:00
Просмотров 3,3 млн
STAGE12 200CC FL-R EN ACTION 🧡🧡
0:49
Просмотров 17 млн