Jet Powered Go-Kart (Top Speed Run)

Подписаться 1,4 млн

Просмотров 752 тыс.

50% 1

I Built another Jet Go-kart just to see what the Top Speed of the single Engine Jet-powered Go-kart is.
In the previous jet go-kart video I did everything except for a top-speed run, so here it is, I thought it was kind of weak because I was expecting a lot more but the wind resistance is much stronger than You think it would be.
I am editing this video after a Brain injury I sustained recently, so I'm not seeing things exactly the same way I used to right now, I hope this video is edited well lol.
let me know what you think and wish me luck on posting more videos! these are pretty difficult sometimes.
Chapters
00:00 Intro
00:18 Building Jet Go-Kart
00:58 Rebuilding Jet Junk Go-Kart
02:11 Testing at 1st Track
05:52 End of 1st Test Run
07:00 Top Speed Test Location
07:48 Top Speed Run
08:41 End of Top Speed Run
Instagram: / warped.perception
Facebook: / warpperception
IMDB: www.imdb.com/title/tt5548028/?
I sometimes post things early or post previews on FB and Instagram so if you like that sort of thing give them a visit.
Please leave any opinions suggestions or comments Below and check out my other videos, Thanks!
By: Matt Mikka

Развлечения

Опубликовано:

26 июн 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 728

@dapz 9 месяцев назад

I was wondering about the top speed when i watched that original vid. Tbh i thought it would be a bit faster, i was able to get to 41mph on my own jet kart with a smaller engine and it was still accelerating, but i got sketched out.

@WarpedPerception 9 месяцев назад

Yeah I think I remember that, I also thought it would have been much faster like over 80 mph. But it was definitely on the balance point and the wind resistance was definitely doing its thing. I think with some more aerodynamics it would have probably done 70 or 75, but honestly if I want to go faster I'll just put more engines hahaha.

@pitbullw2350 9 месяцев назад

I saw a guy who was trying to break the world speed record with a RC car having to do a bunch of things similar to what would hold back the speed from air drag That dudes problem was tires, it’s prob a combination of road type and tires 40 mph with a jet engine is pretty sketchy, idk how the dude did 60 mph in one, I bet a pothole or bump is a nightmare

@jeronimoayala4757 9 месяцев назад

@@WarpedPerception how much would it cost to build one of this i love to own one ? Would you guys build one sell it ? I would be interested in buying it

@LordSlag 9 месяцев назад

@@WarpedPerception Please tell us the name of the awesome song playing at @1:00 !!!!!!!!!!!!

@matejzahajsky 9 месяцев назад

@@WarpedPerception Aerodynamics are for people who can't build engines.

@Roboseal2 9 месяцев назад

This man is the definition of; If it drives, put a jet engine on it. Rad.

@natsterjam 9 месяцев назад

Colin Furze mate!

@fpstina 9 месяцев назад

this channel always amazes me at the effort this dude puts into his projects... always 10/10

@mojo3008 9 месяцев назад

@DontReadMyProfilePicture.57 is this some kind of Russian nesting doll thing?

@feelincrispy7053 9 месяцев назад

Yeah 100%, the amount detail in every little thing he does is crazy. So many other build channels are sketchy as hell and just try to hide it with editing

@WarpedPerception Месяц назад

Thanks! I appreciate that, been building up my capabilities by took longer than I thought ( as most things do)

@htownblue11 9 месяцев назад

Many people cannot appreciate what this man builds in his garage. Amazing stuff as always WP! And 50 plus mph is a cart is far faster than most can conceive. That’s smoking.

@WarpedPerception 9 месяцев назад

Thanks, personally I thought it was going to go faster I thought I was going to get to at least 80. But that wind force is killer!

@WarpedPerception 9 месяцев назад

Thanks! You know what's up. Tbh the disease is very painful at times, making things work well is hard, making things work great is very difficult most times.

@rian0xFFF 9 месяцев назад

@@WarpedPerceptionwhat if you try adding some aerodynamics body to it

@michaelyoung1020 9 месяцев назад

We run over 50mph with predator engines on small dirt tracks. Clones are 60+

@debbieroth2627 9 месяцев назад

U should make me one

@user-lo5hq2je4j 8 месяцев назад

3 engines will be insanity

@waitemc 9 месяцев назад

As always, above and beyond what we deserve in a vid. Thanks man

@WarpedPerception 9 месяцев назад

😊

@CriticoolHit 9 месяцев назад

I know you do stuff differently but I gladly would have watched 5 individual 25 minute long episodes of you building this thing.

@WarpedPerception 9 месяцев назад

Thank you, I think about that every so often, but to be realistic I have a lot of videos to make, I'm so backlogged. I'm just trying to get on it now.

@kaboom362 9 месяцев назад

Sick Matt.. I just showed my son your channel. It's probably the best channel he's ever seen. 😊

@jcims 9 месяцев назад

@@WarpedPerception here’s another one for the backlog, completely unrelated to this. I haven’t found a single video on the Internet that shows the output side of a turbo when it’s being run by exhaust of an engine. Like how much air is coming out, and what happens when you start to constrain it with a nozzle? is it a leaf blower? Is it an air compressor, what’s going on there?

@thusarakapalliyeguru7655 7 месяцев назад

@@jcimsThere is a video called "Actual working model of turbo charger" I think it's similar to what your looking for, not exactly but pretty close :)

@aimless9137 6 месяцев назад

I have something to build and wonder if that engine and electrics are for sale somewhere that you could share the link?

@TobiasKornmayer 9 месяцев назад

Nice build! Absolutely nice seeing you build the right stuff the right way! Thanks bro!

@WarpedPerception 9 месяцев назад

Thank you... You know the details are tough!

@BlueRice 9 месяцев назад

this man put passion into it without knowing it. add finishing to the chair, wheel balancing and paint the chassis. this is quality workmanship just for a project that he do for youtube

@joellowery 8 месяцев назад

How much does a jet engines cost?

@BiggMo 9 месяцев назад

Praying for your recovery…. Glad your staying engaged with you passions. Take care

@WarpedPerception 9 месяцев назад

Thanks.... I'm just glad I'm here and I'm still functional, brain injuries are no joke, like nothing I've ever experienced before super bizarre.

@HangryGiant 9 месяцев назад

@WarpedPerception damn bro glad you're doing better, I know it's none of my business, but you know what they say curiosity killed the cat, do you mind elaborating a bit on why your injury happend? Did you fall and hit your head or crash or something like that? I really like your channel and can't wait to see future uploads :)

@trevon4423 9 месяцев назад

Felt like i have been waiting for this video for years now. Lol went to sleep a few time wondering what the top speed was going to be. I fully appreciate thr work you put into this and all you videos.

@WarpedPerception 9 месяцев назад

I know, I'm always super late because I got a million things going on, but recently I sort of become more focused so hopefully I can keep some momentum on some videos here. Thanks!!

@christopher.m.estelow 9 месяцев назад

That was awesome!! I would love to see you add some aerodynamic additions/changes to see how much faster you can get it to go. I'm guessing if you can get the seat to lay back some, that alone could easily get it over 70. Great job and keep up the great work!!

@ProducerGio 9 месяцев назад

Absolutely amazing! The fabrication, the upholstery, everything diy. I want to be like you when I grow up lol.

@Gyppor 9 месяцев назад

These are great, I think you could get more content out of a lot of these builds if you did build videos. I know they take time, but there is so much involved in these and I'm sure we all want to see more!

@piuthemagicman 9 месяцев назад

Love your projects! Very underrated, been following you for years. Greetings from far away Finland in Europe, keep it up! 💪😎👌

@systemuser8701 9 месяцев назад

It's interesting how you layed out the dawg as a blast shield !!!🐕

@alraybaca6235 9 месяцев назад

Good to see you back

@MH3914 8 месяцев назад

Man this is such a nice video! So much progress and perfectly created with no drag or delay to make the video longer! PERFECT!

@WarpedPerception 8 месяцев назад

Thanks I appreciate that, sometimes I wonder whether I should make the videos longer and more dragged out .

@HeisenbergFam 9 месяцев назад

Bro casually came out of nowhere after 2 months as usual

@WarpedPerception 9 месяцев назад

I know it's been tough, I was pretty much on schedule last year around this time but then I did a few projects with Mr Beast, I just finished those up in June, then I had to set up all my machines for all of the videos moving forward, then I had a brain injury a few weeks ago. But I'm recovering and back to making videos now. All I really want is a consistent upload schedule but these projects are extremely difficult and my life is insane.

@M4Lemonade 9 месяцев назад

This man brings anything he thinks of to life

@echobeefpv8530 9 месяцев назад

That was crazy cool !! If you added aerodynamics of any sort, I'm sure you could increase the top end, but not by much. Not sure I would want to go much faster, without some crash protection, pads, etc., as any failure at these speeds would probably equal a hospital trip. Just a very cool project, all in all, and well done !!

@WarpedPerception 9 месяцев назад

Yeah exactly, I completely agree.

@CryoToast 9 месяцев назад

If he added some aero it could be a fighter jet.

@JustBadly 9 месяцев назад

Now he's at 50mph the jet behind the seat will start to suffer reduced intake due to a low pressure region forming.

@yuvix 9 месяцев назад

To be fair, I think there could've been a noticeable difference even if he had just tucked down.

@WarpedPerception 9 месяцев назад

@@yuvix I agree, but My solution would just be add more engines lol

@TheLaser373 9 месяцев назад

Great, as always, I really appreciate your detailed works!

@Shadobanned4life 8 месяцев назад

Amazing ! Great work.

@gloknor 9 месяцев назад

Amazing and really cool kart! I can't wait to see whats next .Thanks for posting this .

@pedromatajr8725 9 месяцев назад

This is awesome! Next level content for sure.

@WarpedPerception 9 месяцев назад

Thank you

@ctdieselnut 8 месяцев назад

Man, you do great work. A lot of very different skills. I was impressed just by the wrapping of the steering wheel lol. Some would make a video just of that, for you, its just a 5 second time lapse shot (which is cool too). I can appreciate the time it takes to make custom stuff like that. Let alone the one off cnc parts, anodizing, building/programming electronics, etc.. Happy i found this channel. You could probably make a separate channel just for 'behind the scenes' from leftover footage that gets cut/glossed over during a project like this.

@JoaoZagoSJC 7 месяцев назад

Craziest but amazing to see. Great work dude.

@spencer9190 8 месяцев назад

Dude you are seriously talented and skilled. Blows my mind how much you know how to do

@benjaminkenobi21 4 месяца назад

It sounds like a jet plane. It's actually a freaking jet! Fascinating

@Deeveeaar 9 месяцев назад

What a great build! That seems like alot of fun to drive, nice engineering =)

@WarpedPerception 9 месяцев назад

Thanks Man! To be honest I really didn't want to do this video, I wanted to go way more extreme, but I had to do it because I was curious and so was everyone else I guess. But the next couple GoKart videos are insane lol. I just don't think I'm going to be able to ride them because I recently had a brain injury.

@BiggMo 9 месяцев назад

@@WarpedPerceptionyour fans appreciate having this for comparison before the next generation. Great video… Sorry to hear about the injury… I pray that it’s fully recoverable.

@Deeveeaar 9 месяцев назад

So sorry to hear about your brain injury, hope you recover quickly! Can't wait to see what is next in store mate!@@WarpedPerception

@johnhutchison9782 9 месяцев назад

@@WarpedPerceptionwasn't courtesy of one of your projects, was it? You do some outstanding things on this channel. 🤘best wishes on a speedy recovery. Peace, John

@alexluke84 5 месяцев назад

You are a scientist, top mechanic, driver, inventor...you rock 💪😎

@boeing777pilot5 9 месяцев назад

These videos are always amazing to watch! Do you think that one day you would make a tutorial video/explaining the process of what you do to make these jet engines? I think it would be awesome to see the process.

@u.e.u.e. 9 месяцев назад

- improve the aerodynamics with some covers over the frame and the bottom - side skirts for groundeffect - add 2 vertical parallel fins behind (each) jet engine that are controlled via cables and the steering for giving you vector-thrust in tighter turns; if you have oversteer and you need to counter-steer the vector-thrust can help you to get the rear of the go-cart back on track 😉 *Nice project!!!* 😃👍

@ejcrashed 9 месяцев назад

Ohh man, yes!, your stuff is allways top notch!

@travis.napier 9 месяцев назад

Yes! Finally. So glad to see you back in the swing of content, keep this momentum please!

@WarpedPerception 9 месяцев назад

Thanks I'm trying, it's been so tough, between doing and Mr Beast projects for months on end, and trying to get my stuff together, and then recently getting injured... Always something but I'm definitely going to try to keep momentum here, I love making videos.

@travis.napier 9 месяцев назад

@@WarpedPerception I'm sure that Mr. Beast project was much more involved than it appears from how we see it through a screen. We know you love making videos! You've got this.

@WarpedPerception 9 месяцев назад

@@travis.napier well I worked on at least 5 Mr Beast projects so yeah That's what it took so long. Not sure which one you saw.

@travis.napier 9 месяцев назад

@@WarpedPerception Oh man, I'll have to look more then. I only saw the one jumping the school buses.

@superskullmaster 9 месяцев назад

That drag behind the go-cart is also robbing the engine of ram recovery pressure. You need ducts that take the free stream air and direct it to the intake.

@WarpedPerception 9 месяцев назад

Well these engines don't benefit from RAM recovery at all, if they don't get enough air, they stall

@bhess1212 9 месяцев назад

@@WarpedPerception Now water injection? That may help! Might not be enough compression for that though

@BlueRice 9 месяцев назад

i thought it would be sick if adds body panel that shape like a jet with the intake of F35 up infront to channel it to the jet engine. i wonder if it faster like that

@WarpedPerception 9 месяцев назад

@@BlueRice that's exactly what I was thinking for the next build. I don't know how much it would help performance but it would look cool for sure.

@tjmorgan700 Месяц назад

I was like wtf with the intake behind the seat..

@quicksilverguy21 9 месяцев назад

Can’t wait for 3 jets! Nice work!

@waltervetri2476 8 месяцев назад

Brilliant ,and the bonus you even explain the thrust drag stuff so simply Great video . Vetri South Africa 🙏🇿🇦🙏

@diyelectricbiker9361 9 месяцев назад

That thing as a Hybrid would be even more awesome.. Amazing work.

@KenjiThe1st 9 месяцев назад

I'm just glad that you're back, bro. Awesome content as usual, keep it up! Get well soon.

@WarpedPerception 9 месяцев назад

Thanks, I'm getting a little better everyday, my vision and brain function were the biggest hurdles

@joshuagibson2520 9 месяцев назад

Been missing your content, Matt. ALWAYS good shit. Keep em coming. Please.

@WarpedPerception 9 месяцев назад

Thanks, I've been really tied up for the last year working on Mr Beast project, but as of July I'm back on my stuff, A few weeks ago I got sidetracked with an injury but I'm recovering now...it was insanely painful.

@CarLoverPhotography 9 месяцев назад

That looks like a blast

@markhavlicsek910 9 месяцев назад

Cool video, I enjoyed that. I've always wanted to explore the possibilities of those small jet engines, and what better way to do it than with a go cart.

@ryan49805 9 месяцев назад

I love this channel!!! Wish you much success bro!!! 🔥💯🔥

@WarpedPerception 9 месяцев назад

Thanks!! It's been really rough

@Mrkiki22 9 месяцев назад

Bro killed the video again 🎉

@MrSeekaywhy 9 месяцев назад

Truly spectacular!!!

@enginediy 9 месяцев назад

Awesome

@2HIGH59 8 месяцев назад

One bad ass video loved the sound 👍🏻

@My-Pal-Hal 9 месяцев назад

HEY,.. HE DIDN'T SIGNAL HIS TURNS ! ! ! ... shots fired, shots fired 😳

@OmarDelawar 9 месяцев назад

Need to do a twin jet setup next! Can’t wait to see the top speed on that!

@montesik 8 месяцев назад

Amazing job!

@JoelCreates 9 месяцев назад

Awesome man, you went over the top with the finishing touches, was that seat alcantara?

@WarpedPerception 9 месяцев назад

Thanks... Yes it is !!!! Good eye.

@alohabobbylaguna1702 9 месяцев назад

A great Go Kart BUILD with a Jet engine

@TheRealCCSmith 8 месяцев назад

That was baddass👍made me nervous watching!

@christophermarshall5765 9 месяцев назад

Awesome mate!! Very quick. To decrease drag, enclose the front.

@mariobrnabic4252 9 месяцев назад

What a fantastic video. Love your stuff..

@WarpedPerception 9 месяцев назад

Thank you

@MaNNeRz91 9 месяцев назад

Chinese cheap tyres will be a completely different compound of rubber. Harder. Longer to heat up. More difficult to keep the heat etc

@WarpedPerception 9 месяцев назад

I found that out the Hard way lbvs lol.

@MaNNeRz91 9 месяцев назад

@@WarpedPerception me too except I was in my 1985 mini in the rain 😂😂😂😂 I always buy a certain hankook tyre nowadays because of it 😅😅

@johnathanh9369 2 месяца назад

Cop casually drives by like a jet engine go cart is the least of his worries that day. Creative content is greatest!

@nathanwhite7518 9 месяцев назад

Bro, all that awesome work and no roll cage? Come on man. Still really cool, super talented.

@shivprakash4996 4 месяца назад

You are amazingly skilled

@ltaldoraine7305 9 месяцев назад

Can't wait to see more jets added to this unit

@Adventure_fuel 9 месяцев назад

That looks so fun.

@samsgarage1716 9 месяцев назад

Great job it’s amazing.

@My-Pal-Hal 9 месяцев назад

First Time Caller 😂 But just looking at the pictures. Extending the frame just a tad. And putting the outside engines, just so they warm the tires. Yeah, make them individually throttlable. You might get a cart that has an All Weather Capability 😂 ... and Sticky in the Corners 😏 From an old school aerospace guy. That actually worked with that Science Guy. I think his name was Speed Walker 😂 ... memories 👍

@robertdecrock4038 9 месяцев назад

Great work ❤

@user-cr5yy4te3i 6 месяцев назад

Too, too, too sweet!

@Johnny_Black88 7 месяцев назад

wow it really works!!! respekt dude

@sebshine 8 месяцев назад

Amazing!

@adammartin4906 9 месяцев назад

Awesome so glad you did a top speed because I was wondering what its top speed was, thanks for doing the top speed!!!

@WarpedPerception 9 месяцев назад

Thanks, A lot of people ask me in the comments, and I was personally curious so it had to be done, I was supposed to have the next video out already but I had a brain injury a few weeks ago, it was hell no joke I can't even explain how intense the pain was for a week and a half straight non-stop no break, it was insane, but I'm back at it now

@billarroo1 9 месяцев назад

I love it. Very NICE. Just watching. this was a great learning experience for me. Can't wait for the three engine model. Almost 3 times faster ? Thanks

@ohiosigmarizzler344 9 месяцев назад

hello its been 12 min and wow that go kart look so goood and the next time strap three jet engines to the go kart

@joeblow5154 3 месяца назад

That was cool!

@alimmaqsa 9 месяцев назад

am glad for being one of the few first subscribers of this chanel 👅

@hamsandwich1860 5 месяцев назад

Those mini turbojets are so cool

@valveman12 7 месяцев назад

That looks like so much fun!

@ashtynpenney7674 7 месяцев назад

I love how my man put a volume warning at 2:58, reminded me to turn my volume *up* lol

@topherwayne4398 9 месяцев назад

Awsome video!!

@Leonardokite 9 месяцев назад

Everything you build is top notch Matt. Your kids friends must be envious!

@WarpedPerception 9 месяцев назад

The little kids are always pretty cool, it's the adults I have issues with, I have people that are so mad at me for no reason at all that they don't even talk to me.. dead serious..

@Leonardokite 9 месяцев назад

@@WarpedPerception That is sad my friend. But I guess that's just how some people are nowadays. 🤷‍♀ And yeah, kids are amazing.

@bozotheclown935 8 месяцев назад

Pretty crazy setup specially with all that fuel and stuff in front of you. Just glad you didn't hurt yourself doing this. The sort of thing you should be doing at a racetrack with flame proof suits not on a back street somewhere. Anyway, good to see you survived it OK.

@insAneTunA 9 месяцев назад

It is pretty cool 👍

@qkb3128 6 месяцев назад

Great job.

@cyprex 9 месяцев назад

Love the science and engineering!

@WarpedPerception 9 месяцев назад

Thank you

@user-cj8ef8gt2g 8 месяцев назад

I'm curious what the rpm came up to after the carb adjustment. By the way I want to say thanks for the hard work and time put into your unbiased reviews. Keep up the good work.

@jburick9123 6 месяцев назад

thats crazy that vid of the dude on the kawasaki is in my hometown🤣 never realized that till now

@nathanieljames7462 9 месяцев назад

That anodizing looks SICK bro!!

@WarpedPerception 9 месяцев назад

It works so well And you can do pretty much any color you want if you do it yourself.

@nathanieljames7462 9 месяцев назад

@@WarpedPerception You're a wizard, Matt! I love it!

@blk77sunshn 8 месяцев назад

That was very impressive ! I was not expecting that level of speed and performance from only one of those engines. That jet engine packs a punch with out a doubt ! At those speeds with that amount of fuel sloshing around not to mention a smoking hot jet engine, you might want to get a nomex suit or the likes. Just my 2 cents.

@DadsGarageDiagnosticSpecialist 9 месяцев назад

Nobody does it quite like you. Well done.

@M4Lemonade 9 месяцев назад

keep up the good work

@kevinchamberlain7928 7 месяцев назад

Huge amount of torque!

@ENLIGHTENINGLIVES4ALL 8 месяцев назад

Great job

@augustoschreiner9847 9 месяцев назад

it's been a long time I was waiting for this new video, it looks the last one was 86 years ago

@WarpedPerception 9 месяцев назад

I definitely feels like it was 86 years ago, unfortunately I had an brain injury which was no fun but I'm recovering and I'm back making videos thank God..

@jacobsoby3910 9 месяцев назад

That's cool. Missing the "professional driver on a closed road" disclaimer:Q

@RobOnMotors 9 месяцев назад

I randomly searched your channel yesterday for jet engine content as a reminiscer and suddenly this has appeared. Awesome!

@WarpedPerception 9 месяцев назад

I just got back to it after almost a year of back to back Mr beast videos and then I had a head injury a couple weeks ago I'm now recovering from ☹️. I literally have like the worst luck

@RobOnMotors 9 месяцев назад

@@WarpedPerception get better soon. I'll be ready and waiting for the next jet madness!

@WarpedPerception 9 месяцев назад

@@RobOnMotors thanks.... I'm on it.