No video :(

Jet Powered Scooter

Подписаться 1,4 млн

Просмотров 4,2 млн

50% 1

I Mount a Jet Engine on my Electric Scooter to see just how crazy it will be and how fast it can go!.
The electric scooter that I'm using is an all-wheel drive Fiido Beast, the jet turbine has almost 100 lb of thrust, it's a really crazy project and one of the few projects that I was actually a little afraid of a little.
The scooter has a combined weight with me as the rider of about 300 lb, so that is quite the power-to-weight ratio.
The scooter was a ton of fun even without the jet engine I have taken this thing on road Off-Road and I usually get to the store faster on the scooter than in the car, in the city at least.
Here's Links to the Fiido Beast Electric Scooter and the HydroDiesel, after riding this scooter I never looked at any other scooter the same again, I have so much fun on this thing!.
Scooter Link: bit.ly/WarpedP...
HydroDiesel: bit.ly/HydroDi...
↓↓Social media Links↓↓
🐦 ► Twitter: / warpperception
👍 ► Facebook: / warpperception
◙ ► Instagram: / warped.perception
☢ ► IMDB: www.imdb.com/ti...
I sometimes post things early or post previews on FB and Instagram so if you like that sort of thing give them a visit.
Please leave any opinions suggestions or comments Below and don't forget to check out our other videos and subscribe, Thank you.
Watch this in 4k when possible, it looks incredibly awesome !
Carbon 12
www.c12.tv
Produced By: Carbon 12
Directed By: Matt Mikka

Опубликовано:

21 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 3,7 тыс.

@MrCrofty1993 2 года назад

Can we appreciate how clean this guy's welding is

@dmanm85 Год назад

They are real welds too.. not tiktok welds

@CrazyFunnyCats Год назад

He sure takes pride is his skills! 👍☕️☕️☕️🐿🇨🇦

@zeus6793 Год назад

I ran auto service departments for years....I've seen ONE other guy who had welds like that. That's in 30 years!

@CrazyFunnyCats Год назад

@@zeus6793 best looking welds look like chicken shit with no bubbles 😹👍 MIG is our fav welding Stainless is too toxic We had 2 uncles die from throat cancer from that

@MrTaylorfenoglio Год назад

Bro you obviously never been on the internet before. Rule #1 is never complement a tradesmen on his work. Especially welding!!

@mrnine324 2 года назад

I can't believe nobody came out of their homes wondering why a jet engine sounded so close. Imagine chilling in your living room, and then hearing the sound of that turbine spinning up and thinking "did they build an airport nearby?"

@DennisRivera-Gamer 2 года назад

TBH the whole video FIRST im impressed , SECONDINGLY where the hell are PPL @ no one poke their faces out lol ??

@DallinDyer 2 года назад

@@DennisRivera-Gamer third, how did his hat stay on at 60 mph without turning it around backwards?

@DennisRivera-Gamer 2 года назад

@@DallinDyer lmao 🤣💯 I've done 62mph on high octane ported gtr46 GOPED AND yes I agree with YOU 🤣💯

@DallinDyer 2 года назад

@@DennisRivera-Gamer haha seriously though, its impressive

@giorgiodelvai7712 2 года назад

LOL , it will scare me as fuck if i hear that while im chilling xD

@BlueDroneBlues Год назад

That is balls of steel right there! I could see the jet engine getting you up to 100 mph. I just don't think you'd make it out in 1 piece. Good thing you knew when the steering was getting so hard to control, you just knew it was time to slow the hell down! This is super cool, but also super dangerous! Super sick engine and very fun test!

@ronpalmer1371 Месяц назад

He’s already lost bits of himself 🤣

@overlvlresistant7720 Год назад

OH MY GOSH... This guy is the guy. He is literally *THE* guy.

@rotax636nut5 2 года назад

This is by far the best thing you've done, you could market this in kit form so other completely crazy scooter owners can try to kill themselves on it, I can hardly imagine a more dangerous machine to use on a public road, GREAT, I want MORE!

@WarpedPerception 2 года назад

I was thinking about doing that

@proxyhx2075 2 года назад

@@WarpedPerception It would make a great kit to be honest

@michaelwest2388 2 года назад

@@WarpedPerception DOOOOOOOOOOOOOO IT

@yamammaatrick 2 года назад

@@WarpedPerception $$$$ I would buy a kit from you if you start selling them. Would be the only reason I'd want the scooter lol.

@theforgottenera7145 2 года назад

Until someone dies

@sapoman01 2 года назад

"Get up and do something with yourself. Learn some skills, build stuff and have fun." I admire that mindset sir, thanks a lot.

@joshuacaylor881 Год назад

Your fabrication skills are next level. Truly remarkable to watch your process.

@InterestingOrlanoVid Год назад

Impressed with his build! Who the heck has all the right machines at their disposal to fabricate such a beast of a scooter.?!?!?!

@JoelCreates 2 года назад

That cage is gorgeous, looks too good really

@WarpedPerception 2 года назад

Thank you

@Vulcan650Vampire 2 года назад

Imagine a 1960’s TV commercial for an older version of this product. I could totally see a rudimentary version of this being a toy company’s best/worst idea. Example: Lawn Darts, gas powered pogo sticks, and 3-wheelers

@123123boobies 2 года назад

Those were all great ideas anyways. Expecially 3 wheelers. Those things are fun. Stuff needs to stop being banned because of dumbasses not being careful.

@Vulcan650Vampire 2 года назад

@@123123boobies I agree, I had one for a long time..just gotta know how to ride it

@Vulcan650Vampire 2 года назад

@Space Ghost EZ bake ovens were no prize either

@mickgibson370 2 года назад

@@Vulcan650Vampire My little sister had one! I bake cookies in it!

@eksine 2 года назад

Want to send grandma into the afterlife faster? Have we got a wheel chair for you! Only $29,999

@fiestathesh4rk Год назад

Also, dont try this at home.

@breadface91 3 месяца назад

Who the hell will drive a Scoter in a home

@aikenthompson5364 3 месяца назад

I did this with a go kart with a 200 lbs/s jet engine, and 3 sugar potassium rockets to kick star the acceleration to get air flowing into the engine.

@timesthree5757 3 месяца назад

Now I want to try this at home

@JacobDrosdick 2 месяца назад

That's ok, I'll try it in the street then

@ExploreScaryContentCuresBoredo Месяц назад

Already did.. I am in the hospital

@sx20Ramar Год назад

I think those high power scooters are dangerous as hell, and you put a jet engine on it! Great job putting it all together. Looks awesome!

@ughmas 2 года назад

This is absolutely rad, the sound of the jet winding down as you come to a stop is so badass

@FaceFaceMan 2 года назад

The quintessential "cruisin' for a bruisin"! I'd be decked out like Mortis the Safety Tortois. Your fabrication is outstanding. Those seams on the fuel tanks look like a robot welded them.

@gatambojames Год назад

This is a show of mastery of talent, fabrication and ingenuity.

@happybaals Год назад

Was anyone else impressed by his clean welds??

@clubasbunkeras5738 Год назад

Зачем мне швы ,главное ноги и голова целы!

@ZEEKUPP Год назад

Yes.

@GrindHardPlumbingCo 2 года назад

We should build a jet powered Power Wheels ride on toy... 🎆

@WarpedPerception 2 года назад

Let's do it I heard from my brother rich your good guys

@jurriendw050 2 года назад

Put a jet engine temporarily on the jetboat

@liamblogs 2 года назад

@@WarpedPerception I’d buy something like that

@xanderhol2336 2 года назад

Can I have one

@Undjetzt1 2 года назад

😅👍

@BeefIngot 2 года назад

I feel like a bad dismount on that would be like a motorcycle crash. I'd want full skid gear/padding/neck bracing for that.

@WarpedPerception 2 года назад

Yes true

@Retro_Rich 2 года назад

Serious lack of PPE. Organ donor scenario. Balls the size of Zelensky though. Cell phone with a speed app would have helped with the jet propulsion only run.

@ninelaivz4334 2 года назад

@@Retro_Rich Zelensky has balls? Zelensky is a fucking neo con puppet. Fucked up his country when the Russians were offering deals for years.

@dragonsword7370 2 года назад

@@Retro_Rich my town has a rentable online ran scooter service for standing or sitting models a couple of months ago. The fine print states the need of pads but no one does. One girl on her first ride wiped out and needs facial reconstruction from a broken face. Other injuries are still coming into the hospital. That company was trying to hire guys to run around and pick up scooters but I don't want to be tied to that company unless I'm desperate for work.

@CorDawgYT 2 года назад

At least he put helmet on eventually. Being a meat crayon is no good for anyone. It can happen from something as simple as a squirrel running across the road.

@guiemnk Год назад

It would be wonderful if you could make a video explaining how all the electronics work and everything that needs to be done so that one can recreate these projects at home.

@Isaac-tr7pu Год назад

@Nocrofade Год назад

bro no way he will let entire humanity travel using scooters with fighter jet engines.

@zawditudacosta2890 Год назад

Nah.. people will be hittin windows instead of curbs.

@BestMods168 Год назад

@WolfPackYT Год назад

0:27 cutest little laugh so precious 😊 father of the decade!

@raymondwarnerofficial 2 года назад

This is absolutely wild. Any guesses as to what the fastest speed you got on it was? Would love to try something like this out one day!

@nighthawk0077 2 года назад

62km/h

@ChristopherGuilday Год назад

Looked like about 40-45 MPH.

@Herbertti3 Год назад

@@nighthawk0077 I've done more with my regular FLJ T11, comes also with 100km range which equates to 70km with my fat ass.

@___xyz___ Год назад

6:33 thank me later

@___xyz___ Год назад

9:14

@spaceaddict5484 2 года назад

This was awesome! The small wheels would probably be sketchy at high speeds, but if they were bigger you'd get way less wobble.

@glitchmaster643 2 года назад

He was riding the scooter the wrong way so his stability wasn’t good because he was standing forwards with both feet right next to each other and not in front of each other so that’s why it’s wobbly

2 года назад

That's why steering dampers exist

@glitchmaster643 2 года назад

@ yeah well I can’t afford stuff like that

@proxyhx2075 2 года назад

@@glitchmaster643 A high quality one would cost you less than 60 bucks, would you rather instead pay with your life? It wouldn't burn a hole through your wallet that's for sure.

@Blox117 2 года назад

if you are concerned about speed wobble a bike would be a lot better really.

@genghisfimpley3516 10 месяцев назад

This guy is very talented. The final product looks like how it would come from the factory if they offered a jet powered option

@lefthandedscrewdriver3954 Год назад

I'm impressed with your design and fabrication skills! Great video s

@RatherBeRestoring 2 года назад

Jet powered ANYTHING from WP and I pause whatever other video I’m watching!! 🔥🔥🔥

@Sludge73 2 года назад

How'd I miss this, awesome scooter by itself. That jet cage looks awesome. The whole project is a complete success. Thanks for sharing!

@CoreyChambersLA Год назад

That's about as safe as a jet-powered baby stroller.

@Sabamonster Год назад

The idea of looking out my window and watching someone fly by on a jet-powered scooter is absolutely hilarious to me.

@privatename3621 2 года назад

"I've never ridden a jet powered scooter before, I was gonna bring my helmet but forgot it, but I do have my gloves. Let's see what happens!" ...definitely a "warped perception". Glad you survived it.

@teimll 2 года назад

“Ghetto neighborhood”? I’m not sure that words means what you think it means. 😜 GREAT scooter though! Thanks for making it and the video! Such a cool sound pulling up. You are a brave man!!!

@nickgibson1191 2 года назад

I was looking for this comment!!! Suburban ghetto?? Makes no sense Haha matt rocks tho

@akplayz1154 2 года назад

Well, you saved me from typing that out myself. That's a beautiful neighborhood compared to where I live. Cool project though, looks nice.

@vaderdown26 2 года назад

i was thinking the exact same thing. I was like bruh this video is cool and all but you think this is a Ghetto? Guess he doesn't know what a Favela is then 🤣

@fajarsodiqfawwaz6083 Год назад

when I saw his creative brother I was inspired to admire clever and logical thinking and character

@-NME 2 года назад

Next time put ur smartphone in ur pocket with a GPS speedometer open, it will measure the maxspeed and save it so you can check it after u done with the run :)

@yodasbff3395 2 года назад

I love the sound of a jet engine 👍, too bad they burn so much fuel. Beautiful fabrication on the jet engine mount 👍.

@timmanboy1 2 года назад

I had considered building an experimental plane with 4 of the bigger jet cat engines. Roughly calculating around 80 gallons of fuel burn an hour.

@MrHansen Год назад

This has got to be the craziest and cleanest project build you have done to date. Kudos on the fabrication and final outcome. Way too cool !

@WarpedEnEspanol 7 месяцев назад

Thanks, I thought the newest go-kart came out clean too

@infobaseworks2401 Год назад

Quite possibly the most innovative video on youtube

@Sandy.J.Lloyd.Sr. 2 года назад

Would love to see you make another run with a speedometer, love the retro styling on the jet engine. Will definitely share this video, keep up the great content.

@WarpedPerception 2 года назад

Thank you

@MrMbuttron 2 года назад

@@WarpedPerception was this shot in palos off of 135th and harlem and by the wonder bread factory ? i live very close to you and i have a monster of a project id like to show u

@TeslaLiam 2 года назад

@@MrMbuttron What big project are you talking about?

@ghostrunner2138 2 года назад

Measure the distance from the telephone poles and you can see how long it took in the video

@Sandy.J.Lloyd.Sr. 2 года назад

@@ghostrunner2138 Being that’s all it takes to calculate the speed of his final run, how about you letting everyone know what that speed is? I’m sure Mike would like to know as well.

@Leonardokite 2 года назад

You're crazy Matt. You take the ludicrous and make it happen! What an awesome little scooter project. You never cease to amaze me. Oh, and shame on you for not wearing your helmet that first ride. 😢😉

@user-uh7vi9om7w Год назад

Rocket Man, the main thing at the end of the strip is not to forget that you don't have wings and stop in time!!!🤠

@sandorszabo Год назад

You left the stand down at 8:40!!!! It was super dangerous, I'm happy you didn't die!

@MightyCalves 2 года назад

Awesome work! If you'd wanna improve this project, install a steering damper and change tyres to PMT. As for safety, get full motorcycle gear and change stance to one foot in front and one back.

@grantandrew619 Год назад

feet side by side is much safer, one foot forward only leaves one way to exit scooter. yes I know i've been trained in dismounting from trains, so like it or not, you;re wrong

@MightyCalves Год назад

@@grantandrew619 Trains 😂

@alaricwilli6482 2 года назад

I would suspect that it's not regenerative braking that's causing the issue. Rather the motor controller can't cycle the magnet phases quick enough, meaning they won't be pushing/pulling at the correct time. Alternatively you are indeed generating to much power and it is starting to flow backwards into the motor controllers. Regenerative braking works like this, but only when the brake switch is triggered and it is turned on. If your scooter has a coasting function then it may solve the problem by turning it on.

@TeslaLiam 2 года назад

Very true!

@WarpedPerception 2 года назад

Yeah a coasting function would do it, I reached out to the manufacturer after this happened to see what they say they haven't got back to me yet

@Blox117 2 года назад

incredible, i explained exactly what was wrong with this setup and my comments were deleted

@WarpedPerception 2 года назад

@@Blox117 why did you delete your comments? Because I didn't delete them.

@Blox117 2 года назад

@@WarpedPerception it was deleted by youtube. my comment told you that the magnets cause eddy currents that slow you down more as speed increases. you need to replace them with non-motor wheels.

@LexyTheEbikeQueen Год назад

Wow so u can basically build ur own entire powerful electric bike from scratch so freaking talented wow i wish i had talent like u

@dannyburleigh1 Год назад

1 of the great things about the Escooter in general is the fact that it doesn't make any noise and it doesn't pollute! Or use stinky fule!!

@shredder8910 2 года назад

Really appreciate all the awesome fab work that goes into these projects. Really inspiring and what i'd hope to be able to do someday in my own garage. Full design to part. Tons of hardwork that goes into these videos, only shown in a little 30 second clip, so we can have these awesome engineering videos.

@CaptianInternet 2 года назад

It is wonderful that some heroic people see the real questions that need to be solved. A question that many of use thought many times and than need to be answered. A question deep in our childish souls. - "What happens when I mount a jet engine on this." Thank you, good sir.

@DanielGullo Год назад

I am surprised that it doesn't knock the thing right off the kickstand while it's starting up... This is uber-badass.

@MrTexaspete30 2 месяца назад

Thus guy has legit talent and is most likely a mad scientist. I look forward to when he builds a real flux capacitor.

@WarpedPerception 2 месяца назад

Thanks, I'm working on it! Progress is always much slower than you want it to be.

@testurenergy 2 года назад

The frame for the turbojet looks sick. Nice design.

@AlexEMF 2 года назад

I really wish you provide numbers like acceleration numbers, top speed, power to weight ratio, etc. It's gonna give us a lot better prospective to what we're looking at. Please, try to figure out some ways to do that in your next projects. Thank you for what you do anyway because it's great.

@ZueTubeTv 2 года назад

for what , this shit is dumb

@CreatureOfDarknessDK Год назад

Nice touch leaving that support leg down.

@akathecops Год назад

Ur a hero brother. All your projects have my grandson inspired. Thank you from the bottom of my heart. Dish

@RCTommy Год назад

Always turn the gas turbine facing into the wind when starting. These mini jet engines don't like starting with a tail wind, and that sputtering wet/hot start you did at 9:52 could have been avoided if you oriented it correctly before starting. Awesome video!

@Sha19769 Год назад

Big jet engines don't like starting with a tailwind either! 😉

@croman38 2 года назад

Awesome video! Couple things: - Steering damper. Bolts on easily and will drastically reduce that dreaded speed wobble. - Street tires. Less rolling resistance and will be a lot smoother and faster. Should be easy to find them in the 10 or 11 inch size. - Higher end scooter such as the Rion RE90. This scooter can hit 120 kmh (75 mph) WITHOUT a jet engine strapped to the back lol. (You should also be able to flash the controller to remove the speed limiter if it has one) - If you get all 3 of those plus your jet engine expertise, you should be able to set the world record for fastest scooter ever! Cos why not!

@quetimporta213 2 года назад

It's an experiment, bro 🙄

@croman38 2 года назад

@@quetimporta213 I realize that. All I wrote are simply suggestions, bro 😅

@quetimporta213 2 года назад

@@croman38 for what? Who cares? Or was pointless. You people

@SaltyCracker402 2 года назад

I have a nanrobot ls7+ and I've seen 62 mph. I'm curious about the controller flashing you mentioned. Do you know any companies that do it or maybe how to do it myself? I have two 50amp controllers in mine

@JokeryEU 2 года назад

@@quetimporta213 experiments that come into reality ;) and you can buy one in the future from your car dealer :P . Almost all vehicles that are fast have limiters, to abide by the law and avoid needing specialized permits to make them, as an owner you can remove them since its your product.

@user-ke2ll9uw7h 9 месяцев назад

Awesome! A scooter with a jet engine, unbelievable! You're a very skilled individual, hats off to you!

@user-yg2gn8rl6d Год назад

Amazing!! You are our NEW IRONMAN in the next couple of years..

@Nycist 2 года назад

First time watching, let me say this was amazing. You’re also nuts😂. No way in hell I’d have the balls to take a jet powered scooter I built myself up to 63+ mph without proper protection. Balls of steel bro!🤙

@TheLolpwnz 2 года назад

its not balls its another side of that :D

@tolman4tor257 2 года назад

lol that made me laugh :)

@syukriimran1933 2 года назад

You'd explain well what I want to comment.

@madhatten00 2 года назад

it's insane the thing literally caught on fire and he still rode it after

@raginginferno868 2 года назад

@huge asian x petite white faster than u

@petronioaznar 2 года назад

To eliminate the wobble, you need to put one foot on the front, one on the back, and lean as much weight as you can over the handlebar. I do 120kmh (Moyatron) and my mate 146kmh (Rion) and we have no issues.

@WarpedPerception 2 года назад

Geezus, that Moyatron goes over 55 mph out of the box, that's insane. I'm going to try that tactic next time

@WarpedPerception 2 года назад

Dam man, the Ruin is 80mph, holy hell...that's just too fast for a scooter..

@petronioaznar 2 года назад

@@WarpedPerception Yeah the Rion is just nuts, I have tried it and the acceleration is plain scary. It has the same push fron the beginning until the end, even at 120kmh the wheels keep drifting.

@leoncaples2947 2 года назад

Or, you know, just buy a steering damper.

@CoLD.SToRAGE 2 года назад

I see maybe you have a camera on the handlebar? That could be causing some of the wobble. Also, your cellphone can measure your speed. 😉

@htiekeith Год назад

Nice build

@Alpha_Rocking Год назад

The fact that the front wheel starts to wobble at a certain speed is due to the scissors-type suspension design. With this type of suspension / design, the wheel actually always wants to turn 180° [to the direction of motion] because it would be so in a natural way in the track.😎 Example: If you have ever taken a closer look at the small castors of an office chair, you will have noticed that the point that holds them to one of the five struts of the office chair is not in the center but shifted outward. If you hold a wheel at the top of the shaft and push it forward, the wheel immediately rotates 180° & naturally lies in line. Exactly the same thing the wheel of the scooter wants to do.... If you were to turn the design 180° so that the suspension would face the rider (there are scooters that are built this way...) then the wheel would naturally lie in the track and cushion shocks. Since e-scooters are usually designed without jet engine & such high speeds, such a scissor suspension design is still acceptable - although it is purely technically a misconstruction - because it brings unrest into the driving behavior, thus unsafe and ultimately dangerous..🙃 Kind regards, ζicᾰdἒ_Διphφ 💫🛸😊

@peoplez129 Год назад

You see a similar thing in motorcycles. It's called the "Death Wobble", and once it starts you're pretty much guaranteed to go down. Basically, he's lucky he stopped when he did, as a crash was imminent. The thing is though, he's actually lucky he didn't just slam on the brakes, because when you're in a death wobble if you try to brake and stop, it's just going to get even more out of control. You just have to keep going and holding on, not trying to fight it. Trying to fight it just makes it worse. It will naturally correct itself. But most people panic and try to fight it, which is why they go down. It's not always correctable though, most of the time once it starts it can't be stopped. He's just lucky he was dealing with small wheels at a lower speed instead of large wheels. That's the only thing that kept it from being worse.

@rehanshah8400 2 года назад

Love your all videos love from India 🇮🇳🇮🇳🇮🇳🇮🇳🇮🇳🇮🇳🇮🇳🇮🇳🇮🇳🇮🇳

@magnetoone2995 2 года назад

Absolutely amazing that you make everything yourself! Hats of to you sir!

@johnchan6191 11 месяцев назад

Omg, U're the Tony Stark w/ Elec Scooter. U're gonna have alot ofun w/ that big toy. Thx 4 sharing on Utube.

@maiksinichkin3259 Год назад

CRAZY !!! ))) Осталось добавить турбины и крылья !!! ))) И будет ОК !!! 🛴🛩

@ulrichmachtle4864 2 года назад

one of the first test pilots of the allies after the war flew the ME 262 said the same, It was like being pushed my a giant angel...

@DetroitMicroSound 2 года назад

Man, your design and fab skills have really gone to a high standard. -Maybe a simple steering damper will safely allow higher speeds! 😉

@lachlankeevers1418 Год назад

It is so wild that you ride that thing with little more than a full face helmet, you a crazy man

@robertlu893 Год назад

Extremely nice build very impressed

@laetitialeroi6753 Год назад

C'est pas concus pour une trot.. My friend.. Patent are not légality. You are reallly a génius but dangerous.. For thé peoples who see your concept.. Anyway you are great..... My friend..

@cyan2748 2 года назад

Imagine sitting in your house drinking coffee and looking out the window and you see a man on a scooter with a jet engine

@angelespino3563 2 года назад

I know right I was like dam what makes the neighborhood ghetto? Looks nice to me !

@hedgehog1684 2 года назад

when ur running late for work

@wramsey2656 Месяц назад

I would say, "I need to cut back on the caffeine".

@joshuagibson2520 2 года назад

Matt, you do great work. Top to bottom. Even your filming and editing are great. Always a pleasure when you put a new video out.

@EldestXc Год назад

The capture of the dog made me chuckle

@maverickwatchreviews Год назад

Dude's welding game is next level!

@jasonpoindexter4678 2 года назад

Man I think that thing is awesome. I'm working towards breaking the current world record for the fastest kick scooter. You have inspired me to keep moving forward with my project. It seem that you have much better resources and equipment. The cnc machine and the heli arc are must have to go to the next level. Thank you for the video. I've raced motorcycles and high performance cars my whole life and safety equipment is a must if you continue to press the limits get a set of leathers good boots gloves n Simpson helmet. I've gone down before and the pavement is unforgiven so get the gear or get someone else that has it to do the test ride. We need you in one piece to make bad ass videos that inspire our warped perception s

@samgerland6087 Год назад

Good luck :D

@krzysztofneubauer2390 2 года назад

You could come up with a Jet-scooter, but you couldn't come up with installing a gps tracker on a phone to measure it's speed. LOL :D But anyway... That is one hell of an impressive peace of engineering. Respect!

@uploadJ Год назад

re: "but you couldn't come up with installing a gps tracker on a phone to measure it's speed" Scooter HAS a speedometer, but the scooter was kicking in REGEN BRAKING (an UNKNOWN feature above 60), so, HE TURN OFF THE SCOOTER ELECTRONICS.

@BreezyNinja_ Год назад

The thing that really amazed me was that there's not a single person around like it was shot at a ghost town - a really nice one.

@IvanFazekas Год назад

10:02 that sound... so nostalgic. I low-key miss the flightline.

@bonafide9085 2 года назад

Regen brakes has a little magnet and a hall effect sensor built into the brake lever. Depending on how far you pull the brake, the resistance of the sensor will change providing feedback to the motor controller. Basically it tells how strong the regen should happen.

@JohnTaylor-aftrwjt 2 года назад

Man! I wish I had a tenth of the equipment that you have!! That's figgin awesome!!!

@Hitech82 Год назад

Now that maybe one of the best uses of a mini jet I've ever seen..

@samueljordan5601 2 года назад

Your welds are really good looking dude, keep it up

@asdlfkj12jieweo21 Год назад

Mad Respect for your technical skills mate - cool project

@Ryan-lx6oh Год назад

Dude put some wings on that scooter and make her fly! I am in awe of your engineering/fabrication skills! Speechless! 😮😊😃😁

@alanspring8462 8 месяцев назад

Happy to subscribe.❤ Never stop being a kid and always have fun.

@JayLang7 2 года назад

I just love the way you build stuff. Much respect to you!

@GainingDespair 2 года назад

Generally electric engines have a max RPM which they are intended to see. Going above this can damage the engine, I believe to some degree this is what was limiting your speed, resistance in the engine built up while it was on. It was likely trying to speed the scooter up at a slower speed than it was traveling causing resistance due to running far past spec, and acting kinda like motor braking would by downshifting.

@GainingDespair 2 года назад

@@alexgivideos1965 Essentially, electric motors work by producing magnetic fields, by switching polarities it causes the shaft to spin. They produce a lot for torque while operating, however there is a max speed which they can switch polarity. Above this the engine is still switching polarity at the max possible speed but the jet motor is forcing the rotor to push past this (some positive, negative, but also some positive, positive, and negative, negative). This wouldn't/shouldn't effect the motor before it reaches its switching speed, but past it, it will cause resistance on the rotor. By turning the electric motor off this problem doesn't occur (to the same degree) if it remains permanently attached at the drive shaft. In fact it should function as alternator while off recharging the battery some.

@writerconsidered Год назад

No matter what this guys Darwin award will be a well engineered one.

@kelval5679 Год назад

Fantastic project.. Tell me what would I need to do a similar project.

@htownblue11 2 года назад

Matt!!! I love it when you’re “in the lab” creating cool ideas man. I never know what I’m gonna get in the next video, but I always know it’s gonna be something fantastic.

@ddegn 2 года назад

You almost got me to believe this was real. The give away was seeing those welds. Those welds are obviously CGI. Yes, I'm joking. What an amazing project! Thanks for another really fun video.

@WarpedPerception 2 года назад

Haha.. I'll definitely take that as a compliment

@JamesBrown-rt5ky 2 года назад

Great fabrication but have an experienced rider test it with some protection on their body. If you own a cellphone it has GPS on it

@Madmike908 4 месяца назад

Really trusting the wheel bearings, hardware, and frame on that Chinese scooter. Build one off of a goped, they are made in the USA with quality materials.

@dm285 7 месяцев назад

Very professional looking metal farbrication! Very fun looking and sounding ground vehicle! Had you ever thought of having small small wings that would fold out w/ small hydraulics to power same.....so that one could, when safe, actually have the worlds first Jet Propelled Flying Scooter ! You could call it the "Defiant 2" ? !😉

@TheGiantsWillWake Год назад

Dude! First time on one of your videos, and I love that your work is so clean and well-done. It's really a joy to watch someone who does really nice work. Hats off!

@ContentWizard Год назад

Hats off… And helmets on! :-)

@clubasbunkeras5738 Год назад

Пока не выехал мусоровоз!!!

@clubasbunkeras5738 Год назад

Мусоровоз отработал иначе асфальт был бы мокрый от лепешки крови !!!!

@andyroo3022 2 года назад

I appreciated your awesome fabrication work and nice welds. The sound of that jet made me smile. I can imagine being in one of those houses and hearing that scooter go past, saying "WTF is that". Well done

@MrLeiduowen Год назад

13:32 The scooter became self-conscious and started running away from its master🤣

@bigdpr96 Год назад

I feel like that's a great back up for when you run out of power and need to get that extra mile just to make it home haha

@Viking2dk 2 года назад

Kinda scary you forgot the kickstand on that top-speed run there.

@TheColinputer 2 года назад

I think what was happening with the scooter limiting your top speed was that the brushless motors were getting de synced with the controllers. The controllers simply arnt designed (or programed) to run any faster so you get that rough cogging feeling.

@uploadJ Год назад

Hmmm ...