Тёмный

JEYI M.2 Aluminum FinsCold iGlacier8 Heatsink and WD Black SN850 

BuildOrBuy
Подписаться 14 тыс.
Просмотров 15 тыс.
50% 1

Answering Subscribers Questions, this time Pablo has asked Us to Test two Jeyi Heatsinks. First up in this Video, JEYI M.2 Aluminum FinsCold iGlacier8 Heatsink using the WD Black SN850 on the Gigabyte TRX40 Designare Motherboard for PCIe 4.0. We're an Unboxing, Inspection, Installation and Test. We even measured the Thermal Pads for thickness. We spent way too much time messing with the Thermal Pads. However, the Results are fascinating! As Pablo said, someone has to beat the Acidalie! We also look at the WD Black SN850 Specs for Heat. The Heatsink chart is Updated to now include 13 Heatsinks and 3 Quad Adapters from ASUS, Gigabyte and ASRock. And the Firmware has been applied to the WD Black SN850 M.2 NVMe PCIe SSD. That was required to restore performance on the WD Black SN850 M.2 Drive while on the Gigabyte Quad M.2 x16 AIC. The Tests have had to be modified as Subscribers have asked about other options such as a Heatsink for a Laptop and a Heatsink for a PS5. No, this will not work on a PS5. Whereas the Jeyi Copper Finscold Q150 will fit IF the cover is left off.
Components Tested are Listed below. And below that is the Playlist of Heatsinks as requested by Subscribers, in Order from 1 to 12!
Heatsink Playlist:
• Micro Connectors M.2 2...
Product Links below, also in Order according to the Playlist above:
1. Micro Connectors M.2 2280 SSD Low-Profile Heat Sink Kit Cooling Black (NGFFM2-HS804-BK)
amzn.to/3jFZGoY
2. MHQJRH M.2 2280 SSD heatsink, Double-Sided Heat Sink, with Thermal Silicone pad for PC / PS5 M.2 PCIE NVMe SSD or M.2 SATA SSD
amzn.to/3fSdVpx
3. Sabrent M.2 2280 SSD Rocket Heatsink (SB-HTSK)
amzn.to/2VL9PZm
4. Awxlumv M.2 Heatsink Pure Copper NVMe M2 2280 SSD DIY 7 Fins Cooler for Desk Computer (2 Pcs).
amzn.to/3ABtZ73
5. M.2 Copper Heatsinks Cooler for M.2 2280 SSD Laptop(2 Pack)
amzn.to/3m5alfC
6. icepc M.2 2280 SSD Pure Copper Heatsink Kit Cooler Heat Sink with Silicone Based Thermal Pad for Cooling M.2 SSD NGFF SSD NVME SSD(70x20x4mm)
amzn.to/3AKDPUq
7. Acidalie Double Copper Tube Aluminum M.2 Heatsink Cooler, NVMe M.2 2280 SSD Rocket Heat Sinks with Silicone Thermal Pad
amzn.to/3z0RXZ4
8. ineo Aluminum M.2 2280 SSD Heatsinks with 20mm Fan and Pure Cooper Strip for M.2 NVME SSD [C2600 Fan]
amzn.to/381UF4G
9. Thermal Grizzly NVMe M.2 SSD Cooler - 2 Thermal Pads
amzn.to/3yHhPYZ
10. EKWB EK-M.2 NVMe Heatsink
amzn.to/3jXidPb
11. Gigabyte Aorus NVMe Gen4 M.2 1TB PCI-Express 4.0 Interface High Performance Gaming, Full Body Copper Heat Spreader, Toshiba 3D NAND, DDR Cache Buffer, SSD GP-ASM2NE6200TTTD
amzn.to/2YEQBG4
12. Gigabyte Aorus Gen4 7000s SSD 2TB PCIe 4.0 NVMe M.2, Nanocarbon Coated Aluminum Heatsink, 3D TLC NAND, SSD- GP-AG70S2TB
amzn.to/3lg4d2d
13. Gigabyte Aorus Gen4 7000s Prem. M.2 2280 1TB PCI-Express 4.0 x4, NVMe 1.4 3D TLC Internal Solid State Drive (SSD) GP-AG70S1TB-P
click.linksynergy.com/link?id...
14. Digifast M.2 2280 SSD Premium Heatsink
amzn.to/2XF688f
15. ineo M.2 2280 SSD Rocket Heatsink Built-in Cooling Fan [M3]
amzn.to/3i1Lkzj
16. Cryorig CR-M2A Frostbit M2 Heatsink
amzn.to/3EVJucZ
17. JEYI M.2 Aluminum FinsCold iGlacier8 Heatsink
amzn.to/2ZaQqTn
18. Jeyi Copper Finscold Q150 M.2 Heatsink
amzn.to/3bcJoQR
19. WD Black SN850 - Gen4 PCIe, M.2 2280, 3D NAND, Up to 7,000 MB/s - WDS100T1X0E
amzn.to/3AudMke
20. Samsung 980 Pro 1TB PCIe NVMe Gen4 Internal Gaming SSD M.2 (MZ-V8P1T0B)
amzn.to/37DodFr
21. Gigabyte TRX40 Designare Motherboard for Threadripper III
amzn.to/3xB6MzW
22. Supermicro Dual M.2 NVMe Adapter
amzn.to/2VGNQD6
• Supermicro AOC-SLG3-2M...
23. Dual M.2 NVMe PCIe Adapters
• Dual M.2 NVMe PCIe Ada...
24. Seagate FireCuda 530 4TB Internal Solid State Drive - M.2 PCIe Gen4 ×4 NVMe 1.4, Transfer speeds up to 7300 MB/s, 3D TLC NAND, 5100 TBW, 1.8M MTBF, and 3-Year Rescue Services (ZP4000GM3A013)
amzn.to/3CFtWZb
Support BuildOrBuy... www.buymeacoffee.com/gillboyd
www.amazon.com/shop/buildorbuy
As an Amazon Associate I earn from qualifying purchases.
Subscribe, Thumbs Up, Comment! Appreciate Your Support!

Наука

Опубликовано:

 

19 окт 2021

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 113   
@bsiccs
@bsiccs 2 года назад
You got a new subscriber outta me. This is awesome. Answering questions folks are asking! (Including me) 🤣
@BuildOrBuy
@BuildOrBuy 2 года назад
Hi bsiccs, Welcome! I'm honored! We're here to help! Been working on last Video Premiere! Now, on to Comments then next Video! Stay Tuned!
@kamudankemter
@kamudankemter 10 месяцев назад
Impressive result with a basic looking heatsink. Thanks again
@BuildOrBuy
@BuildOrBuy 10 месяцев назад
Hello kamudankemter, Yes, You're right! We had to keep an open mind about all of the M.2 NVMe PCIe SSD Drive Heatsinks tested. Results are Fascinating! Thank You for Watching and Commenting!
@scipionyx
@scipionyx 2 года назад
not gnna lie, im really digging these m.2 heatsink series
@BuildOrBuy
@BuildOrBuy 2 года назад
Hi Farhanul Kazi Islam, Welcome! We had no idea what to expect when asked about Heatsinks for dual M.2 NVMe Adapters then what about on the Motherboard. So We started Testing! Fascinating Results. We're methodical in the What, Why and How of Heatsinks. We have Tested 14 and still more to come! Appreciate Your Comments! Stay Tuned!
@sedgleyathome
@sedgleyathome 2 года назад
Look forward to watch this! Thanks for great work!
@BuildOrBuy
@BuildOrBuy 2 года назад
Hi Bulldog347, Thank You! Appreciate Your Comments! Courtesy of Pablo! This makes #13! The Thermal Pads were tedious. But the Results are what counts! And next up... Another Heatsink!
@sedgleyathome
@sedgleyathome 2 года назад
@@BuildOrBuy 48C - wow that's very impressive! I want to buy one of it!
@sedgleyathome
@sedgleyathome 2 года назад
@@BuildOrBuy Maybe try one of this one: JEYI Q150 M.2 HeatSink, Cooper Fins with Aluminum Frame Passive Heat Sinks - Finscold Q150-1.7mm / 0.68"
@BuildOrBuy
@BuildOrBuy 2 года назад
Hi@@sedgleyathome, Absolutely Amazing Results! Did not expect that! This thing is very tall! Did not expect this one to equal the Acidalie!
@BuildOrBuy
@BuildOrBuy 2 года назад
Hi@@sedgleyathome, Interesting You should mention that one! That's Heatsink #14, today! ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Buz0Me7X_us.html
@sheenapunky
@sheenapunky Год назад
Nice compilation of tests here in this channel! Do you think the Thermalright HR-09 2280 and pro can beat the Acidalie? Any plans to test those? Thanks
@BuildOrBuy
@BuildOrBuy Год назад
Hi sheenapunky, Welcome! Thank You! Good Question! We'd definitely like to find out! Hard to say right now. It should! That thing is huge! As always, test and verify! We'll have to wait and see. We need better, more compact Cooling Solutions! We definitely need more Options! Especially for PCIe 5.0 now!
@recifemedia
@recifemedia 6 месяцев назад
Hello, I just watched your video, I have now also ordered this cooler for my operating system SSD on the motherboard. I would have mounted it differently, removed the sticker, and put the small pads directly on the control chip and memory, or even with paste. The big pad down. But no matter, the large cooler has great cooling potential. I'll subscribe to you! I'm 62 now and before I order anything I always watch videos of the products. Your video here, and then I ordered! I've been involved in the entire computer development process, I always assemble all of my computers myself, and I'm very knowledgeable, including software. I don't pay attention to brands, I have my products that are very good and work well. I order almost everything from China. I always use GIGABYTE motherboards and AMD CPUs. And memory and RAM from NETAC, they always have Samsung chips on them, that's the best product. Greetings from Brazil!
@BuildOrBuy
@BuildOrBuy 2 месяца назад
Hello recifemedia, Welcome Brazil. Just now seeing Your comments. Fantastic. How are your results? I'm honored.
@MATTKBAN
@MATTKBAN 2 года назад
Awesome! I bumped into this one as well. I’m excited to see the other copper Jeyi that came in the package. It looks like the smaller version. The larger one someone has ps5 install pics on their Amazon review. The M.2 case door isn’t on, but it still fits with the ps5 faceplate on😅
@BuildOrBuy
@BuildOrBuy 2 года назад
Hi MATTKBAN, Excellent! We were too! At the request of Pablo! Wow! That must be wicked looking! Thanks for Sharing!
@atomicskull6405
@atomicskull6405 2 года назад
I'd recommend binning the pads that come with it and use 20x120mm 1mm and 0.5mm arctic silver pad or some other name brand. On the Samsung SSDs you use the 1mm on the back and on the memory controller and the 0.5mm on the memory chips. You also need to compress the assembly while screwing it together, I used a 15 lb weight and a small aluminum block on top of the heatsink and set one end on top of it and then tightened the screws. Also the sticker makes very little difference maybe 1 degree, apparently it's actually a copper foil heat spreader. The heatsink actually raises the temp of the memory chips while lowering the temp of the memory controller, however this isn't a bad thing it's actually better for flash memory chips to be warm when operating.
@BuildOrBuy
@BuildOrBuy Год назад
Hi Atomicskull, Welcome! Just now seeing Your message! Appreciate Your Comments! We have better Performing M.2 Heatsinks that We've Tested! Thanks for Sharing and Watching!
@Kompakuta
@Kompakuta Год назад
Interesting video, thanks
@BuildOrBuy
@BuildOrBuy Год назад
Hi Kompakuta Gaming & Life, Welcome! Thank You! Out of 16 M.2 Heatsinks, this JEYI iGlacier8, is One of Our Two Best Performers! Appreciate Your Comments!
@battleofthewillwhatilikela4650
@battleofthewillwhatilikela4650 2 года назад
My understanding is that the red pad is intended to go on the bottom of the SSD if there are no chips on the back. If there are chips on the back you would use the blue on both sides and you can use the cut squares to put directly on each individual chip. You may or may not use them all.
@BuildOrBuy
@BuildOrBuy 2 года назад
Hi Battle of the WILL (What I Like Lately), Welcome! Correct! Single sided vs Double sided M.2 NVMe. We prefer solid continuous Thermal Pads. Easier to work with. All higher end replacement Thermal Pads, that We are aware of, are continuous. Appreciate Your Comments! Thanks for Watching!
@krackpot_
@krackpot_ Год назад
Is the red pad meant to be a thermal pad too? Mine only came with a peel off sticker on the white side which I'm guessing sticks to the nvme and the red makes contact with the bottom plate? I have a single sided pcie4 nvme drive but wondering if it's better to use both blues as Gil has done here regardless of if single or double sideded.
@Tanquen
@Tanquen Год назад
​@@krackpot_ the white side should be down and the red side should be against the bottom of the SSD.
@HeadBassVTEC
@HeadBassVTEC 11 месяцев назад
@@krackpot_ I just got it and the red one is weird, I would not use that on a double sided ssd it has very different structure to all the thermal pads I've seen if you're single sided then I guess it's just a short protection and you can use it but since they give you two thermal pads I would just use those....the thicker one on the side that is more uneven the bottom bracket is so thin that I don't think it can really transfer any heat to the heatsink anyway
@maxhughes5687
@maxhughes5687 2 года назад
Thanks Gill.🙂
@BuildOrBuy
@BuildOrBuy 2 года назад
Hi Max Hughes, Absolutely! Had no idea this would become so popular! This makes #13! Next one up, #14! ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Buz0Me7X_us.html Thanks for Watching!
@ryanmalin
@ryanmalin 2 года назад
I've got one wd850 with the factory heat sync and one that's bare. I go pretty easy on them. Now you've got me interested what the delta is between the two during a stress test.
@BuildOrBuy
@BuildOrBuy 2 года назад
Hi Ryan Malin, Welcome! Now that would make an excellent Test comparison! Do a Basic Burst Mode Test like this then a throughput Test and Compare! Let Us know Your Results! These Tests are yielding fascinating Results! Stay Tuned!
@jos9678
@jos9678 2 месяца назад
Always enjoy watching your videos. Are the thermal pads supplied of sufficient quality or do you recommend me to use others?
@BuildOrBuy
@BuildOrBuy 2 месяца назад
Hi Joe, Welcome. Good question. Yes they are sufficient. However, for better results, there are other aftermarket Thermal Pads that will be more effective. There are Silicone Thermal Pads and Clay like Thermal Pads. The former are somewhat reusable whereas the latter fall apart upon removal but are the most effective. We have videos on both. Thanks for Watching.
@jos9678
@jos9678 2 месяца назад
@@BuildOrBuy I have a quick question, I have a Samsung 990 pro and everything seems nice and flat on this model, which thickness of Thermal pad is best to use, is 1 mm sufficient at the top? and how many mm at the bottom of the SSD? is thinner better? Also bought a JEYI M.2 Aluminum FinsCold iGlacier8.
@BuildOrBuy
@BuildOrBuy 2 месяца назад
Hi@@jos9678, 1mm is sufficient on top. If there is a Thermal Pad on the bottom it will be thinner. Thickness depending upon what's allowed withing the M.2 NVMe PCIe SSD Drive Heatsink wrap around. Most Heatsinks only use a Thermal Pad on top. It's about cooling the Controller but all M.2 Heatsinks are full length. And your next question, yes we leave the labels on by choice so when we disassemble we know we can still read what M.2 Drive we're using.
@jos9678
@jos9678 2 месяца назад
@@BuildOrBuy Thank you very much for your explanation
@BuildOrBuy
@BuildOrBuy 2 месяца назад
Hi@@jos9678, Yes. Details matter.
@mrgcav
@mrgcav 2 года назад
Wow Another one !
@BuildOrBuy
@BuildOrBuy 2 года назад
Hi mrgcav, Yes! Amazing right! Courtesy of Pablo! This is #13. We now have 14 Total! Next one here: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Buz0Me7X_us.html With Playlist in Description! Thanks for Watching!
@UnniG
@UnniG 2 года назад
Thank you⭐️🌹
@BuildOrBuy
@BuildOrBuy 2 года назад
Hi Mee 2# G, Thank You for Watching!
@TheLisaDeesDelightsShow
@TheLisaDeesDelightsShow 2 года назад
Hello. Catching your replay
@BuildOrBuy
@BuildOrBuy 2 года назад
Hi Lisa Dee, Thank You for Your Support! Blessings!
@mayomancer527
@mayomancer527 11 месяцев назад
just got one of these to go with my 990 pro. I checked and it *should* fit in my motherboard slot fine without interfering with the graphics card or the cpu cooler, but i'll see when it gets here
@bsiccs
@bsiccs 2 года назад
I had to use an alternative pad for the controller than the NAND with mine. I’m using a WD_Black SN750 500Gb. The heat sink sat at different heights on each of those chips. I guess I was being picky but for mine the heat sink wouldn’t have been level on the chips. Due to space in my case, the heat sink is flush to the backplate on my GTX1650SUPER OC that is running an overclock of about 150-250MHz. The card runs cool, and since my case is actually upside down- intake is at the top front, and exhaust is out the bottom back- so the graphics card is actually Above the CPU, and therefore Above the SSD. Should I active cool it with one or two 20-30mm fans?(either twin on the top of the heat sink- like a twin fan GPU, or on the side of the heatsink- like a blower style GPU(would possibly even use a 20-30mm wide blower))
@BuildOrBuy
@BuildOrBuy 2 года назад
Hi bsiccs, Welcome! Just niow seing Your message! Appreciate Your Comments! Heat will not be as big adeal with PCIe 3.0 as it is going forward with PCIe 4.0 and beyond. We also had a slight height difference. The 1mm Thermal Pad was perfect to allow for that minor height difference for Us. As for Active Cooling with Fans, You want to balance the pressure so Your PC Build does not become a dust bunny magnet! Remember, larger Fans move more air and are quieter. Whereas smaller fans make more noise. If You opt for Fans, At least 80mm or 120mm. Either Case Fans or an I/O Card Slot Fan. If You have a Thermistor Heat Sensor, then from there You can monitor the differences. Hope that helps!
@RetroBoxRoom
@RetroBoxRoom 2 года назад
Thank you for all this testing. I've recently upgraded from 2x Samsung 970 Evo 500GB with third-party heatsinks. (Each had a melted rubber band after a few months use - both drives are fine, I just need more space) I've ordered a WD Black SN850 1TB, and a Sabrent Rocket 2TB. They are installed using a DIMM.2 card (PCIe3), leaving me with limited space either side. Could you please test a two different Thermalright m.2 heatsinks? One seems to have a single heatpipe. They say they'll cool by 10-20C.
@BuildOrBuy
@BuildOrBuy 2 года назад
Hi Retro Box Boom, Welcome! Appreciate Your Comments! Melted Heat Bands. That's nuts! Thanks for Sharing! You do know even though You have a new PCIe 4.0 M.2 NVMe SSD Drive, based on Your Description of PCIe 3.0, that's going to be the speed of the Drive which will be 3,500MBps instead of 7,000MBps. Just so You know. As for the Heatsink, is this the one You're referencing? Thermalright M.2 2280 PRO SSD NVME Heatsink Cooler Double-Sided Heat Sink Alloy Aluminum amzn.to/3DVzcYZ As an Amazon Affiliate I earn from qualifying purchases. If You'd like to make a Contribution to cover the costs of this Heatsink, We'll be happy to Test! Thanks for Watching!
@RetroBoxRoom
@RetroBoxRoom 2 года назад
@@BuildOrBuy Thank you. That's one of them. The other version is grey, and doesn't seem to mention a heatpipe.
@BuildOrBuy
@BuildOrBuy 2 года назад
Hi@@RetroBoxRoom, You're welcome! Is this the other one? Thermalright M.2 Heatsink Cooler, NVMe M.2 2280 SSD Aluminum Heat Sinks with Silicone Thermal Pad, Built in 8mm heatpipe amzn.to/3G73vOC As an Amazon Affiliate I earn from qualifying purchases. Hope that helps!
@RetroBoxRoom
@RetroBoxRoom 2 года назад
@@BuildOrBuy No, this is the same as the other. B07XCM1M4F product code should help find it?
@BuildOrBuy
@BuildOrBuy 2 года назад
HI@@RetroBoxRoom, Got it! Thermalright M.2 Heatsink Cooler B07XCM1M4F amzn.to/3AY0XOM As an Amazon Associate I earn from qualifying purchases. Agreed, no indication of a Heatpipe. Hope that helps!
@Blizzard4242
@Blizzard4242 9 месяцев назад
I think it probably would've been easier to place the thermal pads on the SSD first, then peeling off the clear plastic on the other side and placing it on the cooler. Then you don't need to trim the sides and it's not as fiddly.
@daslolo
@daslolo Год назад
How long do you run the drive for? That Acidalie 2 pipe looks like a big chunk of metal so its thermal mass would be excellent at eating up burst of heat but with much less surface area than the iglacier8, it'd be worse at dissipating it.
@BuildOrBuy
@BuildOrBuy Год назад
Hi daslolo, Great Question! Just as You see as Described. A Burst Mode Test. Not a Throughput or long Term Test. This is just a starting point of Default Configurations. As always, Test and Verify! Your Results may vary! Hope that helps!
@daslolo
@daslolo Год назад
That helped a lot as it sealed my choice to gen3. I'm trying to keep noise and therefore thermals down on my upcoming 100gbe NAS so I'll just stripe them and +1 with a fat SATA backup.
@BuildOrBuy
@BuildOrBuy Год назад
Hi@@daslolo, Very good point! Success on Your NAS! Copper or Fiber?
@daslolo
@daslolo Год назад
​@@BuildOrBuythanks! I'm going for twinax until I need range.​
@BuildOrBuy
@BuildOrBuy Год назад
Hi@@daslolo, Glad to help! Appreciate Your Comments! Thanks for Sharing!
@cemdeniz5656
@cemdeniz5656 2 года назад
It's like 48 degrees higher, is the case ventilation bad? I want to buy, is there any user?
@BuildOrBuy
@BuildOrBuy 2 года назад
Hi cem deniz, Welcome! I'm not certain about Your Question. Please explain. The Case We're using, ventilation is ok. We're doing Our Testing with the Side Panel off to expedite Our findings. There's a link in the Description to Purchase this Product. Hope that helps! Appreciate Your Support!
@anthonydagosto7672
@anthonydagosto7672 2 года назад
I've got the Acidalie on both my m.2 ssd's
@BuildOrBuy
@BuildOrBuy 2 года назад
Hi Anthony Dagosto, Welcome! The Acidalie is my favorite! Excellent Choice!
@anthonydagosto7672
@anthonydagosto7672 2 года назад
@@BuildOrBuy thank you for the warm welcome. I've purchased both of my acidalie heatsinks bc of your hard work. Much appreciated due to the endless sea of options online for heatsinks! 👍👍👍A+ RU-vid channel brother, keep it up!
@BuildOrBuy
@BuildOrBuy 2 года назад
Hi@@anthonydagosto7672, Absolutely! Excellent! Thank You for Your Comments! We're now at 14 Heatsinks!
@MrDratik
@MrDratik 6 месяцев назад
It will be enough for Kingston KC3000?
@BuildOrBuy
@BuildOrBuy 2 месяца назад
Hello MrDratik, Welcome. Just now seeing Your question? Did you try this M.2 Heatsink?
@AintPopular
@AintPopular Месяц назад
Does the jeyi m.2 work on nvme as well right
@BuildOrBuy
@BuildOrBuy Месяц назад
Hello AintPopular, Welcome. Yes. All of our M.2 Heatsink videos are using M.2 NVMe PCIe SSD Drives.
@mugenrios2k
@mugenrios2k Год назад
So this JEYI iGlacier8 vs the Acidal 4 pipe; why one vs the other being they both have the same performance keeping temps to 48C......
@BuildOrBuy
@BuildOrBuy Год назад
Hi mugenrios2k, Welcome! These Tests were of 14 M.2 NVMe PCIe Heatsinks and 3 Thermal Pads as requested by Subscribers to Test. For those 2, the Acidalie was 1st whereas the JEYI iGlacier8 was 2nd down the line. For each, to prefer one over the other would be personal Preference if You have the Overhead space to accommodate either of them. Hope that helps! Thanks for Asking!
@Tesseus
@Tesseus 2 года назад
This thing is too big! XD, I don't like how they cut the thermal pads to squares either. Didn't expect the results though!
@BuildOrBuy
@BuildOrBuy 2 года назад
Hi Tesseus, Sorry for not responding sooner! RU-vid has held back several Comments and today they all showed up! We try to respond within 48 hours! I very much agree with You on all of that! We never know what to expect! Cut thermal pads are tedious and a hassle to install. Results were great and unexpected but this is not a practical solution. My preference is till the Acidalie even though it too cannot be used everywhere! We've now Testing 14 Heatsinks! Wow! And We expect there to be more! We can see as We go faster, We get hotter! And We expect Vendors will be addressing this issue. Based on Our Results, that too may be questionable. We shall see! Stay Tuned!
@ssicin9825
@ssicin9825 2 года назад
Hi, can you test these as well? ElecGear M.2 2280 SSD Cooler, M11 Angle and Height Adjustable Heat Pipe + Solid Aluminum Heatsink with PWM Cooling Fan for 80mm PCIe NVMe and SATA SSD Internal Solid State Drive, Thermal Pads included and ineo M.2 2280 SSD Rocket Heatsink Built with Adjustable PWM Cooling Fan [M9] and JEYI Copper M.2 HeatSink, Passive Nvme SSD Heatsinks with Copper Fins - Finscold Q80 and Vantec ICEBERQ M.2 NVMe/SSD Heat Sink with Thermal Pad (HS-NVME150-RD, Red) and XINSHIS - M.2 Heatsink NVMe NGFF SATA M.2 SSD Heatsink Thermal Module, Compatible for PCIE NVME M.2 2280 SSD Radiator and SATA M.2 2280 SSD Heatsink, with Heat Pipe and Silicon Thermal pad
@BuildOrBuy
@BuildOrBuy 2 года назад
Hi SS İÇİN, That's a long List. Be happy to Test those. However, I need to ask for a contribution to cover the cost. Our List started with 6 Heatsinks and has now grown to 14 Heatsinks. That adds up. Hope You understand.
@HeadBassVTEC
@HeadBassVTEC 11 месяцев назад
I got this one labelled as Axagon CLR-M2XL and little disappointed the top part is great....massive aluminium heatsink that will surely outperform anything "normal sized" but the lower part is so thin that I don't think it will do much for cooling the back side of my Firecude 530 and transfer of heat from the back chips to the heatsink still better then what I have now, but still not the perfect M.2 heatsink
@BuildOrBuy
@BuildOrBuy 11 месяцев назад
Hello HeadBaseVTEC, Welcome! Sounds interesting. Have You Tested yet? Only Results are what matters! The bottom wrap around is just a Container for Your Thermal sandwich! Compression! Heat is to be dissipated up and away or through end connection points. Share Your Results!
@jerrysberrys3415
@jerrysberrys3415 2 года назад
I heard somewhere them pads are so you can place them directly on the chips and nothing else ,obviously you would have to take the sticker off though
@BuildOrBuy
@BuildOrBuy 2 года назад
Hi Jerrys Berrys, Correct. However, that would require using the thinnest Thermal Pad on the Bottom instead of the thicker Thermal Pad We used. Furthermore, Yes as You have stated, that would require removing the Label which We do not do. With all of the Testing and Swapping of Drives, We would not be able to keep up who is on first! Your Results may vary. Thank You for Sharing.
@jerrysberrys3415
@jerrysberrys3415 2 года назад
@@BuildOrBuyyea true thanks for the clarification, I've got an idea for a new test take the sticker off one ssd to see if the sticker has any effect on heat ,if you only take one sticker off you can keep track of it
@BuildOrBuy
@BuildOrBuy 2 года назад
Hi@@jerrysberrys3415, Great idea. However we expect to have more Heatsinks to Test. We've already made alterations by Updating the Firmware on the WD Black SN850 to restore Performance on the Gigabyte Aorus M.2 x16 Quad card. We had the same problem as exhibited on x570 chipsets, a degradation in speed. And that's the Drive that runs the hottest until We can Test a PCIe, 3rd Generation M.2 NVMe Drive. The 1stvthing to do would be to change the Thermal Pads. We will do that on the top 2 or 3 Heatsinks eventually.
@jerrysberrys3415
@jerrysberrys3415 2 года назад
@@BuildOrBuy ahh ok got ya man that makes sense, ill be interested for the thermal pad change tests . Keep up the great videos
@BuildOrBuy
@BuildOrBuy 2 года назад
Hi@@jerrysberrys3415, We thought when We were at 6 Heatsinks, that was it. Then more Heatsinks were added. And now We're at 14 Heatsinks. Amazing response! I'm eager to see that too! One Subscriber contacted Acidalie and found out they use a Thermal Pad with a rating of 2 W/mK. Now that's a definite and easy change to make! We know of other Vendors who use a 4 W/mK Thermal Pad. We'll get there! Probably 3 or 4 Thermal Pads based on W/mK values on the top 3 Heatsinks. Fascinating Results! Appreciate Your Support!
@RPR_Photographic_Imagery
@RPR_Photographic_Imagery 2 года назад
Hi Gil. I have been following your RU-vid channel for about 2 month or so now. Your videos have been eXtremely informative and have helped me to select two different M.2 heatsinks (an Acidalie and a Jeyi FinsCold iGlacier8) for a new rig I am building. Anyway, I came across another dude's channel and he had an interesting methodology for applying thermal pads of different thicknesses because the thicknesses of the NANDs and the controller chips are different. What are your thoughts on this? Stop your Samsung NVMe SSD from Overheating and Thermal Throttling ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-I8Z09nU554Q.html
@BuildOrBuy
@BuildOrBuy 2 года назад
Hi Rod N. Knights, Welcome! Sorry for not responding sooner! RU-vid blocks all Comments with links or if a Comment appears to have a link due to a mistyped sentence or truncated sentence. And I don't know when or if they show up. There are about 6 ways to check Comments. And We're not always notified about all Comments. Anyway, to Your Question and Comment... We've been talking about that very subject. First We need to establish stock Device parameters. Then as to the Pads efficacy either of different thicknesses and or Thermal Pads with different Thermal properties or W/mK values. Possibly a mix. And We'll have to use a Drive that has 2 Thermistors, one for the Memory and one for the Memory Controller. Hence the Samsung 980 Pro since the WD Black SN 880 only has 1 Thermistor. Details matter! Appreciate Your Comments! Thanks for Watching!
@Tanquen
@Tanquen Год назад
Seems to work okay but I don't like the fact that the QR code goes to the WeChat app download and not instructions. Also some of the screws weren't threaded correctly and difficult to install. Yeah, the red one is for the bottom and the individual squares are if you have an SSD where you want to place one on each chip and the controller.
@BuildOrBuy
@BuildOrBuy Год назад
Hi Tanquen, Welcome! Sounds like an RMA. Not good to hear about another quality control issue. QR Code and no documentation? Weird! Were You able to complete the Installation? Appreciate You Sharing Your unfortunate experiences. What are Your Results?
@Tanquen
@Tanquen Год назад
@@BuildOrBuy The good part is that I did get it installed and it dropped the overall temperatures about 10°C from the built-in solid metal motherboard covers. Whatever you call them. I got two of these and the second one also had difficulty with a couple of the screws. I just screwed them in and out a few times and they seem to be working okay now.
@BuildOrBuy
@BuildOrBuy Год назад
Hi@@Tanquen, Interesting. Sounds like sloppy manufacturing. Only 10 Degrees Celsius. Those should have yielded far better Results than the Motherboard stock Heatsinks. Curious. Thanks for Sharing!
@Tanquen
@Tanquen Год назад
@@BuildOrBuy The ones on the motherboard are pretty big but they're low profile and don't really have any fins. I do worry about the new ones while they do offer better temps. I think you have to be a lot more careful while working inside the computer. If you bump them, they're probably going to break the m.2 socket. Being so tall it gives them a lot of leverage.
@BuildOrBuy
@BuildOrBuy Год назад
Hi@@Tanquen, Anything is possible. Would definitely require a hard bump!
@jedrula77
@jedrula77 9 месяцев назад
So much talk and it was difficult to cut the thermal pads on the steel bottom plate. So that they do not curl vertically, which may cause poor adhesion of the upper aluminum heat sink and bend the thin PCB of the SSD drive.
@The_SUN1234
@The_SUN1234 5 месяцев назад
22:26
@BuildOrBuy
@BuildOrBuy 2 месяца назад
Hello Sun, Welcome. Just now seeing Your comment through RU-vid Studio. Thank you for watching.
@Grigoriy_Spel
@Grigoriy_Spel Год назад
Ни хуя не понял, но очень интересно.
@BuildOrBuy
@BuildOrBuy Год назад
Hi Александр, Welcome! Understandable! In a nut shell, this and the Acidalie are Our two Best Performing M.2 NVMe PCIe Heatsinks If You have room on Your Motherboard to accommodate them! Hope that helps! Questions? Please ask! We're here to help! Appreciate Your Comments! Thanks for Watching!
@Grigoriy_Spel
@Grigoriy_Spel Год назад
@@BuildOrBuy Yes, thanks, I understand. There were problems with understanding English. The radiator is good, I ordered one for the Netac NV7000.
@BuildOrBuy
@BuildOrBuy Год назад
Hi@@Grigoriy_Spel, Understand. That M.2 NVMe uses the Phison E18 controller. PCIe 4.0 definitely needs a Heatsink! Thanks for Sharing!
Далее
меня не было еще год
08:33
Просмотров 2 млн
MC TAXI: АК-47
35:14
Просмотров 555 тыс.
The Numitron: An obvious idea that wasn't very bright
23:21
I Got Scammed - Fake 4TB Samsung SSD from AliExpress
22:59
Do You need a Heatsink M.2 NVMe Heatsink Test Results
15:40
The ULTIMATE Raspberry Pi 5 NAS
32:14
Просмотров 1,6 млн
🛑 STOP! SAMSUNG НЕ ПОКУПАТЬ!
1:00
Просмотров 343 тыс.