How I remove the K91 Tuff Torque Transaxle from a John Deere 425 445 or 455 garden tractor. Visit the website: www.mmrbeef.com Need parts check out eBay: www.ebay.com/s... Support the channel on Patreon: / mmrbeef
Great video again beef. It is worth mentioning that should someone have a motor in their tractor yet it will have the drive shaft for the charge pump yet, and it will need to be disconnected also. That shaft is located between the 2 hydraulic lines that were disconnected and is connected with 2 (I believe) 13mm bolts.
Thank you !! I ended up removing it front and back. I noticed that on the front end, there's a rubber piece attached to the drive shaft that's cracked 😳
Good video with perfect timing ! I have a 425 with a small transaxle leak on the left side. Almost impossible to see where it’s coming from, I didn’t want to remove it unless I had to. Not quite as involved as I thought, I might get a inspection camera to see in there beforehand. I think it’s leaking around the brake lever input shaft.
Thanks for another great video. I have to remove an AWS unit and replace the center unit from a 2WS, but it's always nice to watch your videos first to pick up any issues you have crossed first.
I might have a few videos showing the removal from an X485. The principle is the same. You need to remove the bolts from the isolator and then you can drop the driveshaft from under the machine and pull the driveshaft off the transaxle. It’s a pain to do but overall not a terribly hard job.
My opinion is the older sunstrand 15u couple with Peerless diff are on par with the K91. The strength of the K91/92 being able to accept a full loader and a wet clutch... other than that both systems are extremely reliable and robust.
mmrbeef gotcha, I found a John Deere f935 for sale on Facebook with a 60 deck, 4 way rotary sweeper and a cozy cab, it has about 2000 hours on the diesel and wondering what price you would label on it? And what problems should I look for if I go to look at the mower?
