Jonsbo N3 NAS Server Build: With Gigabyte MJ11-EC1 

Closer look at the motherboard here: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-4uW0sYZiIVc.html

This case is absolutely incredible. I hope they keep making small cases with even more drive bays.

verry good cable management. Respect! :)

Very nice build

Tusind tak dit fine indlæg. Det er et af de mest spændende og interessante NAS systemer jeg har set. Total i orden musiksmag som Hubbi fra Snave udtrykker det. Bare jeg dog havde hørt om det kabinet noget før.

Gigabyte MJ11-EC1 is basically unobtainium.

Thank you for this great video! Was the 4pin power cable included with the M.2 to PCI Express 3.0 x16 adapter?

What da heck! Arnold Schwarzenheimer is building a NAS!

Hi, Does your system now run? Does this adapters which you link in description work? Im asking because SlimSAS 8i on this motherboard is very picky about adapters and I need to run 2xSFP+ card which need 8x PCIe... My plan is to buy 2 of this board and in each of them run: 2x U.2 NVME SSD(One in M.2 slot and one in 4i slot) 2x SATA HDD 1x 2xSFP+ Network card in SlimSAS 8i

godt arbejde

Det’ da seriøs DiY 😍 For dem der vil have lidt mere plug’n ply der findes mobo’s på Ali Express med en mobile i9 12900HK. Med en m.2 til 6 sata adapter er der stadig plads til pci-e 10-25gbit netkort med og 12900 kan snildt klare det meste plex encoding og har seriøst flere kræfter end fleste m-itx nas boards med n100 eller lign cpu’s. Lidt dyere men hvis man vil ha en nas der kan levere 10-25gbit netværk er en n100 eller celeron lidt i underkanten. Personligt kunne jeg godt nøjes med 4x 2.5 gbit til et hjemme system

@whcvip thanks. Regarding this board, what do you do with a full 8 hard disk and SSD in addition for the OS?

I used a M.2 to Sata adapter instead and replaced the fans with NF-A8 and NF-A9

Got one running in an Supermicro 721tq-350b2 2 x Kingston KSM32ES8/16ME ECC UDIMM at 2600Mhz for 32GB runs perfect Multibit EEC 4 x 16Tb Toshiba MG8 (Sata) 2x SDD Crucial MX500 1 x C300 Crucial (yeah from 15 years ago) on the Slimsas 4i IOCrest m,2 to Intel 2.5G network Takes 41W in idle. at the wall.

Thanks for the review. Can this case support flex PSU?

The only thing i don't get working is the HD let from the board :P That IPMI is awesome.. since i got NOTHING anymore with a "VGA" connector :P It runs TrueNasScale. What i am still going to buy is a 8i to 2x u2 so i can use my Intel 750 as system drive. (no space not going fiddle getting my 10Gbe in)

I am just a little bit concerned about the power consumption. Would have really hoped for 40Watts. Maybe without the gpu and 10gb ethernet card there would be a significant improvement? When there are 8 HDD's loaded im scared of the actual consumption

Where is the manual in internet?

What's the goal of the GPU on a NAS?

ECC RAM?