Gigabyte MJ11-EC1 EPYC Embedded 3000 69 EUR Server Motherboard: Hardware & Software Overlook

Подписаться 10 тыс.

Просмотров 4 тыс.

50% 1

Detailed look at the Gigabyte MJ11-EC1 (MJ11-EC0) EPYC 3151 Motherboard, that can be had for an attractive price on ebay (link below), with embedded AMD EPYC 3000 CPU.
Buy Motherboard Here (Affiliated):
ebay.us/FPabPR
Serve The Home Forum:
forums.servethehome.com/index...
---
Website: www.whcvip.com
---
#gigabyte #epyc #server

Наука

Опубликовано:

11 янв 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 17

@whcvip 5 месяцев назад

Build with this motherboard here: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-91aeOtRjwms.html

@M3dir 28 дней назад

Hi, to power this motherboard, must it be with this 4-pin 12V connector, or can it be powered with a standard 8-pin connector?

@HaimPeretz 3 месяца назад

@whcvip thanks. Regarding this board, what do you do with a full 8 hard disk and SSD in addition for the OS with m.2 to network card and slimsas 8i to GPU?

@whcvip 3 месяца назад

I use unraid, that os runs of a USB flash drive, just standard cheap flash drive, the os runs in RAM once it is booted, so the os does not really write anything to the flash device. Else external USB SSD would be the best bet 👍.

@HaimPeretz 3 месяца назад

@@whcvip thanks for the answer. Because I'm planning to use TrueNAS scale on my build boot from USB is no go. Either I give up one or 2 disks or I split one SATA port to 2-3 ports

@whcvip 3 месяца назад

@HaimPeretz You can boot from USB. Just use an SSD enclosure or pre build USB SSD that supports USB Attached SCSI. Then it should work just fine 👍

@creebefu 5 месяцев назад

I recently got this off eBay, and unfortunately nothing is being outputted from the VGA, without which it's quite unusable! Do you know if there's a setting to disable the VGA output or something?

@creebefu Месяц назад

@@Earlo18 I got mine working. It was the RAM. I'm using 16GB sticks of ECC SDRAM. 32GB sticks didn't want to work.

@akurenda1985 5 месяцев назад

These don't exist on ebay in the US ;(

@boryshacker 6 месяцев назад

have you tried measuring psu idle power alone? 28w seems too much

@whcvip 6 месяцев назад

Thats about what you can expect with this board, using a ATX power supply. Will do some more testing though in the future when all adapters arrive, so I can finish my build. But in the range of 20-28W is in line with other owners testings.

@XaiBeX 6 месяцев назад

300W 80+ gold measures 24-25W idle power with one M2 SSD, and one 32GB ECC unregistered module and SMT enabled. IPMI/BMC alone consumes 6-7W!

@ah-64apache84 6 месяцев назад

I recommend checking out hardware havens video on power supplies for home servers, you want one with good efficiency on low power consumption.

@rolliseventeen 5 месяцев назад

idle 35W mit 64gb ECC, 5 SSD/HDD HomeAssistant läuft. Glaub mein 12J altes Netzteil frisst auch nochmal 5 Watt extra. seasonic ultra fanless 460 v2. für den Preis eines neuen sparsamen kann ich 6 Jahre Strom bezahlen und wieviel man wirklich spart ist so ne Sache... man weiss es vorher nicht.

@milk4chillout 4 месяца назад

? Wovon wird hier gesprochen?

@rolliseventeen 4 месяца назад

@@milk4chillout von dem idle verbrauch von dem Board. Das ist zumindest bei einigen Benutzern in 2 Foren mal Thema. fast alle, auch ich gebe mehr für sparsame Hardware aus, wie ich dann Strom spare. bei manchen Teilen lohnt es sich dann einfach gar nicht....