Junk Yard Tips That'll Save & Make You Money!!

Подписаться 43 тыс.

Просмотров 57 тыс.

50% 1

We need axles for our OnX Offroad Pacer Build. I chose to hunt down a Ford 9 inch rear axle but I went for a different rear axle than most people look for!! Also show you some inside tricks I use at the junk yard and how to make money on your old scrap with a tips I use to get the best bang for buck.
Like this video, maybe try these:
Chevy vs Ford: • We Invade Utah's Large...
Pacer Fail: • My 1976 Pacer Doesn't ...
Ghost Rider Offroad: • 3 Major Issues With Ma...
Axle gears on a Bus?: • How To Install Ring an...
How I Weld to Cast Steel: • How-To Weld To Cast St...
Partner Discounts to help get you on the trail:
20% OFF OnX Offroad Discount code: Coltbuildsit
10% OFF Yankum Ropes Discount code: Colt10
10% OFF EZFlate Discount code: COLT10
10% OFF Barnes4wd code: COLT10
5% OFF Affordable Bender code: COLT5
5% OFF Behemoth Drivetrain code: COLT
10% OFF Vantrue Dash cams: COLTBUILDSIT
5% OFF PCM/ECU at Wranglerfix: COLT5
Health/weight loss - ROOT: therootbrands.com/COLT10
Could you help me out and follow these too:
Need Swag? - www.coltbuildsit.com
Facebook: / coltbuildsit
Instagram: / coltbuildsit
Patreon: / coltbuildsit
Tiktok: / coltbuildsit

Авто/Мото

Опубликовано:

27 апр 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 203

@aired-downoverland9239 Месяц назад

I totally support you venturing off to build your own channel Colt. I’m looking forward to watching and supporting the channel 🙌

@coltbuildsit Месяц назад

I appreciate it!

@cunever Месяц назад

I like the smile on Colt’s face when he found his dream axle, it don’t get more real than that… also his attitude changed from junk yard professor to kid in a candy store!

@chevyfoster9816 Месяц назад

Glad we had what you needed colt it's always fun when you come in my shop.

@bradywilliams2666 Месяц назад

I wish we had a pick and pull here. Yards here don't let you grab your own and think everything is gold.

@MyLifeThai371 Месяц назад

Same.

@kmet2000 Месяц назад

Colt Wiki walking arround the yard with build and swalology lession ❤

@cunever Месяц назад

Best truly hilarious comment so far, with the added advantage of being totally true

@rightwingmanscott Месяц назад

Cool deal. Owning a welding business we haul a lot of scrap off. They love our drops. Only issue is we seem to get flat tires after driving through and unloading. The old days of stock car racing, those 9" Fords were gold but you always tack welded a spot on the axles to keep them from sliding out.

@russellstrickland6513 Месяц назад

i have to say this probably one of my more favorite channels out of the "group" now. I never did watch much of the B&J stuff, but I am excited for Colts channel. He is doing what the rest should be doing, explain what your doing and why and show a result to help and educate your audience and have fun doing it. Colt keep doing what your doing, the others should follow your lead, body people should do body work stuff, people that fab do that, wanna play in sand, need a tow or recovery, do that. I look forward to your build's, your relaying of knowledge and skill, and your demeanor and presentation is entertaining, as well very knowledgeable and appreciated. Great Job Sir.

@coltbuildsit Месяц назад

Wow, Thanks!

@TheWright1 Месяц назад

I loved going to the junkyard as kid finding and pulling parts. These videos are amazing to watch I love how you explain everything in detail it helps a lot that you just don’t skip over some of the important thangs.

@freeidaho-videos Месяц назад

Colt, you outta write all this down. You are an amazing encyclopedia of automotive knowledge.

@novavroomvroom3435 Месяц назад

I learned how to drive in a 1982 E-250 chateau van... I love ford vans so much that i bought a 2007 E-450 cab and chassis dually for hotshot delivery... Now i need a sleeper to put behind the cab...

@hillwilliam Месяц назад

In the mid seventies we made Ford 9” in 2.50, 2.75, 3.00, 3.25, 3.50, 3.70, 4.11 ratios. 3.90, 4.56 and 5. something gear sets were made for service.

@rssvss Месяц назад

Great video. Love junk yard crawls!!

@jimisaacs5292 Месяц назад

I'm just glad you still have junk yards you can go get parts. Around here they all sell online parts only.

@christopherthompson4359 Месяц назад

I loved hitting the parts yards when i was younger, sometimes not even looking for anything specific.

@MyLifeThai371 Месяц назад

I love salvage yards! When I used to farm, I always went to "Meyer's Tractor Salvage" in Aberdeen, SD.

@sumosteve665 Месяц назад

Excellent work my friend. Love to see you making videos to help instruct people how to better their lives. Hats off to you Colt.

@coltbuildsit Месяц назад

Thanks 👍

@freeidaho-videos Месяц назад

You are lucky to have a friend. Our local wrecking yards will not allow grinders. They actually check every toolbox. Too much fire for them.

@kimwatchman644 Месяц назад

In Albuquerque, they have a big yard called 'U Pull It'. The year, vehicles are all in rows like a library, easy finds for parts.

@paledawgoffroad3743 Месяц назад

Came here to see the totally freaked out international nuts. Ok, its me. Im the nut. Sir, what you found there was a traveler. Its still a scout II but they extended it 11 inches and added a third row of seats. It is still a two door configuration. All of them i have ever seen have been a fiberglass top (removable) with a rear hatch style door. As opposed to the steel top and tailgate / topper style rear doors. Now the travelall was on a half or 3/4 ton pickup platform with a full non removable hard top. 3 or 4 doors( just like the suburbans) and had either utility doors or a tailgate with a roll up window in the back. Both of them had 2 or 4 wheel drive options and v8 options. But the travelall was considerably bigger in size. And i know this matters to exactly no one but myself. I just wanted to throw this out there so others can identify a little bit of american history.

@hermione6830 Месяц назад

I just left a comment for Ben at 406 Garage to check out this video. He restores / preserves Internationals.

@jimandnena4 Месяц назад

My sons are 51 and 46. I STILL have lug nuts from our junkyard trips when they were just toddlers. They still make "salvage" yard runs for fox body parts.

@user-zx9qi9hx6c Месяц назад

Love the info Colt ,We went to the Moab car show on Saturday talked with Rory for a minute (another person FULL of knowledge) you guys are better than any college !!!

@DieselArcher Месяц назад

Had an 83 F250 6.9 diesel, broke 2 full floats, found a semi-float and it was a beast. Never had an issue with it.

@freeidaho-videos Месяц назад

I fully understand the love of wandering salvage yards. My grand dad owned one when I was young. I got a 49 Cushman scooter out of that yard when I was 8 years old. We got it running by the time I was 10. I have been riding every since.

@coltbuildsit Месяц назад

That's cool!

@TheOldaz1 Месяц назад

All good info for those who don't know, not so much for old guys, lol. Great insight about the 9" and why you want to go that way.

@chrishorning3937 Месяц назад

Did you notice the hard surfacing on that grapple that unloaded you? I made that grapple from scratch and did the hard surface too. It took 2 sheets of 5'x10'x1". I also put the new engine in that sany that it's mounted to.

@garlandweissenfluh4549 28 дней назад

Great video Colt. Loved the S-10 build.

@steveclark4291 Месяц назад

Thank you Colt for the scrap metal information on how to get more money out of my scrap metal ! We use to have Salvage yards around here in Kansas ! Now most of call themselves recycle yards and they already have pulled everything worth money has been taken off by them ! They also charge you more for stuff became they had taken it off for you !

@jamesmeredith381 Месяц назад

406 garage is International Heaven!

@AKDONURSE Месяц назад

Love the new channel keep it up!

@noonehere1793 Месяц назад

You are a walking encyclopedia of rear ends!😆

@charleytodd5792 Месяц назад

Keep up the great instructional videos!

@coltbuildsit Месяц назад

Thanks, will do!

@dirtydave4351 Месяц назад

Good to see your channel growing so fast. Keep up the good work.

@hwi7114 Месяц назад

Always enjoyable to watch a scrap yard walk around with someone knowledgeable. Thanks for the content Colt, good as always.

@coltbuildsit Месяц назад

Glad you enjoyed it

@Paper452 Месяц назад

Very well done explaining the differences in axles without get to far off into the weeds. I wish I would have had that easy of a time getting a replacement axle for my sons zj, crawling around in the mud with hand tools and an impact was no fun.. Yard allowed no cutting of anything.

@naxja Месяц назад

I got a big bearing 9 inch and hp 44 out of an old bronco. The 44 had the one piece castings for the radius arms and ball joints. Got another hp 44 out of a 70s f150 with drum brakes swapped the brakes and spindles all over to the 70s hp 44, put in a xj with 36 tsl swampers, wheeled it for years.

@MrFordpowerforever Месяц назад

Missed a few things on 9”s. No carrier splits at all, all trucks 73 and newer are 31 spline. Some Vans have an offset center section with different length axles cause the motor is moved over for pedal clearance on drivers side. Also take a flathead screwdriver and spend two minutes popping the tabs to take the tanks off the radiator, super simple and saves more aluminum.

@nathanwest4605 Месяц назад

I'm digging your new channel! Keep killing it with the content.

@jakequaempts5234 Месяц назад

Can’t wait to see the pacer in action

@jodyseaman1885 Месяц назад

Excited to see how the Pacer turns out. Had a friend that bought one brand new first year they were made.

@evantouchett2754 22 дня назад

Great axle explanation. Keep them coming

@nikonikorian6124 Месяц назад

Another great and useful video. I find your videos so much better now that you're doing it for yourself. Better material, More useful information, and keeping it real instead of just someone throwing money towards a build instead of doing real world like the rest of us. Thank you very much Keep it coming M8.

@coltbuildsit Месяц назад

Great to hear!

@fscottgray9784 Месяц назад

My dad loved the IH scouts and vehicles. We had several over the years. I used to love cruising junk yards for old parts.

@pmae9010 Месяц назад

nice tips on re-cycle, but you can make a plier that opens the radiator tabs so you get the value of the end plate also.

@damoose1829 Месяц назад

I spent many many hours in the bone yards hunting down 9" Rears building street and off-road vehicles. Was always a adventure. Miss it!!

@keithreisinger1529 Месяц назад

The van trick was some awesome info

@marknewman570 Месяц назад

Scout traveler, not travel all 👍🏼

@doughaven-rf8id Месяц назад

Most people will drive past a scrap yard and only see junk. Colt and other likeminded folks will see "treasure". Thanks for the continuing education lesson.

@waynedieleman2857 Месяц назад

Love going to the salvage yard, looking at parts that can fit what I need regardless of make

@123chupadero Месяц назад

Colt- if I was actually building a rear end your knowledge is unreal....thanks

@tylerbuhite5432 Месяц назад

Really enjoyed this and i learned nothing new! Keep em coming Colt!

@dirtyfingersgarage Месяц назад

lots of great information there Colt. Time to do a scrap yard run with a bunch of scrap metal ...

@jeremyspurlock6636 Месяц назад

Tremors the movie made those gladiators one of my top tier dream trucks

@freeidaho-videos Месяц назад

Plasma cutter is great for cleaning up "dirty aluminum."

@guypehaim1080 Месяц назад

The catalyst of a catalytic converter is usually Platinum (Pt), Palladium (Pd), and Rhodium (Rh). All three of these platinum group metals are rare.

@jaqass07 Месяц назад

Great info on diffs, valuable info for those not knowing

@paulshannon4576 Месяц назад

I had a 74 F-100 and had a 9” rear differential but I was always worried about breaking an axle but in 30 years it never happened even running 10 x 15” tires. But I did crack the weld and the pumpkin and was able to find a 9” out of a E-200 van that had shorter tubes.

@Ddabig40mac Месяц назад

406 Garage will want contact info for those Internationals!

@jamiecaskey7287 Месяц назад

Wow! So much info on pretty much everything that has a axle! Lol. Great times and vids Colt. Keep on goin man!

@timoldenburg2249 Месяц назад

You said that you forgot the other steel but I disagree, you actually remembered it 👍😁👍

@wiggie7420 Месяц назад

This is my favorite video to date. Well done allot of nice tips and tricks.

@coltbuildsit Месяц назад

Awesome, thank you!

@richardbaxter3886 Месяц назад

Enjoy the knowledge you share

@douglasschafer6372 3 дня назад

Thanks, informative and entertaining

@samsanderson7159 Месяц назад

I definitely miss going to the junk yard with my dad. Those were good times for sure. All the local ones we went to back then are gone now. There is one about an hour Away that i have hit a couple times. I'm not sure if they let kids in or not. I'll have to check next time i go.

@ford_drivingbuilder4225 Месяц назад

a couple of nice salvage yards there.

@bradleymadosh911 Месяц назад

In 07 i just got out of Federal prison and i went around my Reservation and picked up junk any and everything i could find for free and some i bout for cheep. I would buy trucks and cars after i started hauling metal and making some money. I was making pretty good money. Then some people seen me doing it after a year and they started and then it was hard to find. It cleaned up a lot of people's yards thow around here. Junking is easy and fun and when you learn how to separate it all you make more. I even did trail house frames and would cutt them up from come corner to the opposite side corner had to be 3 feet or less and thst would ne prepared steel and you get way mor for it.

@katreniaclark Месяц назад

You also had to clean up your yard for the move too...... Great tidbits.

@Looserdownfab Месяц назад

Dang it colt I needed that truck bed 😢

@tennesseebuckoutdoors4778 Месяц назад

Love the way you explain everything but Dude you need to snag the International Scout Traveler. they only made them from 1976 to 1980 and the 1980's are very rare.

@dannydavis2046 Месяц назад

The two door lwb was a IH Travler. The four door was a Travelall.

@stevesporer5434 Месяц назад

The future looks bright, better wear them shades. Look forward to the next onyx build. Fell in love with that S-10/ Smokeshow build and planning a similar build on my 94 K2500 I've owned for 25 yrs. Inspirational to say the least. THANK YOU!!!!!

@toddhoffmaster6057 Месяц назад

The junkyard has some good finds in it. I would love to get one of the IH Travelers. The LJ of IH Scouts. 😅

@campy9712 Месяц назад

Great video, thanks for sharing it with us.

@terminatorx5836 Месяц назад

Great content Colt! I get that same feeling walking around a yard looking for treasures!

@coltbuildsit Месяц назад

Exactly!

@putmeoutdoors Месяц назад

I always appreciate you sharing your knowledge on axles and gearing.

@lylewiese847 Месяц назад

The " Scout traveler" replaced the "IH travelall". The travelall was a full sized station wagon.

@ted4.0 28 дней назад

Great episode with some awesome info

@robertquackenbush5547 Месяц назад

Thanks for the info about axles colt

@FORCE_PBC Месяц назад

Some good tips. Thanks for the info. Have a great day

@robertforget6369 Месяц назад

holy did pretty good at scrap yard drop off great video keep them coming

@robertr4193 Месяц назад

It's a lot more fun when you are doing things you enjoy doing. One summer I worked all summer at a salvage yard removing tires from the rims for a 1964 Ford Thunderbird. I was planing on fixing and driving the car during my senior year of high school. Was told it had a blown head gasket. I worked on over 5,000 tires that summer. Turned out the motor had a cracked block and I didn't have enough money even back in 1975/76 to replace the motor. Wound up selling the car back to the salvage yard for I think was $275.00. Talk about being young a stupid. That was me.

@coltbuildsit Месяц назад

At least you got tire skills though!

@doughaven-rf8id Месяц назад

Ya, that School of Hard Knocks has a lot of graduates. lol

@robertr4193 Месяц назад

@@doughaven-rf8id Yeah it sure does and some of us are honor graduates. LOL

@marcfox622 Месяц назад

Nice job on your videos. You have a lot of knowledge with this stuff, very educational. Also, you did a great job as a commentator with the Off Road Games on the live stream.

@coltbuildsit Месяц назад

Cool, thanks!

@adambruner5636 Месяц назад

We usually converted our 9 inches to full float. Moser makes a nice kit, not really "budget minded" though

@thekiller1090000 Месяц назад

ive been scraping most my life and i learned a few things thank you

@randypruett5681 Месяц назад

LOL, I made $303 yesterday at the scrap yard with steel and aluminum as well!

@1a1u0g9t4s2u Месяц назад

Nice tips. Thanks for sharing.

@glenludwig5135 Месяц назад

Loved the video

@DennisMcGrew Месяц назад

great as always great content

@isomer13 Месяц назад

Thanks, Colt. Good info.

@albertorozco5981 Месяц назад

Thanks for the tips.

@bobbolieu9013 Месяц назад

Great tips and tricks

@garychaiken808 Месяц назад

Great job. Thank you 😊

@shaneandera1409 Месяц назад

Good tips, very nice!

@aarontaft9275 Месяц назад

Awesome 👌

@user-rb4ce2zp6i Месяц назад

Great video, I subscribed and you have good educational stuff. Love it, GodBless.

@cameronskaggs4188 Месяц назад

Great job

@jamesbigham9036 Месяц назад

Colt I am looking forward to seeing the pacer build that you and Rory will be working on. If anyone knows how to make a PowerPoint build on a budget it would definitely be Rory his Buggy is proof of that