Just one of those days ROR trailer hub and replace bearing and seal mobile hgv mechanic lorry truck 

I have been a car mechanic for almost 30years and I find these videos fantastic because I know nothing about trucks or trailer’s but it looks heavy and hard work. Best video’s on RU-vid 🍺

Me and my daughter were watching a documentary about bird strikes on aircraft. She said 'why would the birds being on strike cause a plane to crash'. Just thought I'd share that.

collected a few of them sdc trailers around 2003-4 from bradder st in mansfield,you just done a masterclass in wheel bearings lad,geat stuff keep the language lad i love the craic its like being stood in front o the salamander in the garage at the end of the day listening to the fitters

2 uploads yes please, absolutely smashing this you tube game. Keep doing what you doing mate loving your videos

Chris wish ide an ounce of your energy and character. Legend. The world's upside down backwards,,your skill and experience should be fecking well paid for .

What you’ve got to remember mate is that even if God posted a perfect 30 minute video some prick would have a moan about it. Some people are full time moaners and they genuinely get a buzz from bringing others down. 99% of comments I see are people same as me who just like the stuff you post. Keep it up and never change 👍.

Idk man, it seems like you do quality work to me. Obviously you have to keep the train moving without fucking around. If it wasn't quality, you would have to go back and fix your work all the time. You work hard for your family and you seem to find time to record it which is impressive. Very skilled.

I did a set of rear shoes and drums last night on an old 55 reg Scania. Both of the drums were seized on solid, to the point where all the jacking points either stripped out, or cracked open the drum. I had to sledge hammer them off, whilst my mate had a crow bar and scaffold tube behind the spigot. I thought to myself "I'm a professional struggler tonight". Keep up the good work mate.

We dont make each other’s life’s easier Chris.. I thought you was a professional struggler 🤣🤣👌👍 keep doing what your doing don’t change one bit contents great mate.. you tube gold this channel.. 👍👊

you are spot on i have mechanic ing for 51 years and that is what we are is strugglers

its nice to see a young man that knows what he is doing, old school mechanic

Brilliant videos it’s good to see real people on RU-vid that tell it as it is

At last! How effing refreshing to watch a real person/yootoober who says it nice and straight re negative comments etc. None of us are forced to watch, and if you don't like it, jog on and click on something else! I don't have a TV now. Got fed up with spending £100s a year for licences etc only to be presented with bilge such as I'm A Desperate British Got No Talent Celebrity/Attention Seeking Wannabe Who Can't Dance, Has No X Factor, Voice, Charisma And Wants To Get Out Of Big Brothers House blah yada. I prefer to watch real people doing real things whilst educating and entertaining us...... I was an HGV driver from 1990-2018, and for 9 years was an owner driver, although I always pulled other companies trailers. People like Chris kept my wheels turning throughout, which was always hugely appreciated. This is my first visit to the channel, and it won't be the last. Cheers.

Loving this channel real genuine down to earth bloke keep up the good work

Great Video Chris, looking forward to seeing more, good to see real life worker explaining. exactly how its done, and not all that stuff about ticking boxes with a high vis jacket on, just getting on with it, and putting up with it starting to rain as well, tough work, but keep up the good work.

Professional strugglers we are matey. I work on trucks and trailers or Lorries in New Zealand. Just spend heaps on my time pulling a sized bearing on the SAF axle, yep designing a puller because the customer doesn't want to spend the money on a new hub and bearings but needs to get the drum off to replace the linings. Great video btw, keep up the good work, there's lots of strugglers out there too.

The discussion about the twig was truly informative thank you.

Hi Chris all I can say is keep them videos coming. And in life you should never ever have to explain yourself to no one. Top tip on how to pack a bearing with grease too. 👍

Fair play to you mate .. I love watching your videos !! Always puts a smile on my face .. I have ms an had to give up work but hey ho I'm improveing so fingers crossed I can get back to work... Watching people like you makes me more determined !! Your personality is infectious in the good way lol ... Keep doing what you're doing fella 👌👍

Just subscribed to this chanel today . Stumbled on it by accident. I'm a dryer and washer technician and Home diy car mechanic. Different ball game but the thinking out the box is the same. Your a top guy love the videos

Chris i think your videos are fantastic my professional struggler dont know much about the mechanical side of H.G.V worked in them but watching your videos i learn a lot. If i was ever going to do what you do i would want you to teach me. Keep struggling and keep videos coming

Absolutely Keep doing what your doing, there always some A holes . You always put a smile on the rest of the people watching. Def jog on if your not happy. The rest of us are .happy days.

Been doing it for years that way Chris for washing machine bearings works a treat 👌

Deadly M keep2em coming I love watching these. 48 and still learning. Love the banter with you and everyone don't let the .......bring you down

Love it mate. Someone who aint afraid to lose one or two idiots telling you what to do. Keep it up Chris. You are brilliant.

It's great watching you Chris your whit and humour makes any job you do worth watching. You always brighten up my day. Top man thankyou.keep them coming.

Love your presenting style, I had years of doing pretty much the same as you’re doing. The job went all to pot when the fancy electronics came in 🤬. Most breakdowns occur now because of crap electrics. Keep up the good work Chris 👏👏👏👏👏👏👏

Don't worry about what people think mate, you keep doing what you are doing mate making memories ❤

Just scroll up, ha excellent!! Always enjoy the videos just the way they are mate, no pretense, no BS just good honest struggling.

Good on description on bearings, I have taught this type of stuff to aircraft landing wheel shops. Just for reference for tapered roller bearings outer races are called cups and inners are cones. Also its good to check the roller ends faces for scuffing and the rib for cracking. Recall that some planes which are turned too tightly would crack the ribs on the bearings.

Great videos mate , A nice wee trick I use for removing the full wheel and hub assembly out in the field is to have an old Long Vehicle plate with a bit of oil on it just have the wheel sitting on it and no more and the wheel slides off easily. Definitely save your back mate .

Best thing to do with people who moan about you is just completely ignore them, don't reply to them and don't even comment on them. They will soon move onto another channel to see if they can get a rise out of someone else. Keep up the good work Chris.

I’m learning loads from you and the comments! I’ll soon be a professional struggler

Your channel, your rules pal 🤪👌 Cleaned, changed and repacked a few bearings in my time too, proper lovely job mate haha I actually like doing the taper bearings tbf. Better than the pressed bearing types lol

Nice technique using the old race to fit the new one I usually use a little brass bar and can be a pain getting it started sometimes

Great video Chris, hope your cash flow issue gets sorted pronto.

You can't please everyone on your tube . Your not the first person to say it. Just keep doing what your doing . And sod the ones that don't like it. Your doing a grand job 👏

I’m not a qualified mechanic, but I work along with my brother and try to learn, I’m more interested in trucks and I enjoy the videos, very informative thank you.

Im Not even a lorry mechanic but enjoy your videos, keep up the good work chris

Haha gotta love those people who tell ya what ya should be doing on ya channel 😂, We get it all the time. I watch loads of ya vids, but never comment coz I know ya a busy lad 😂 stay safe! 👍

I have learnt a lot from your videos im not a mechanic but I find your video very interesting. Well done bud. 😃

Really enjoy these videos, nothing like honest work 👌🏻👌🏻

I enjoy watching your videos, thank you for posting them .

Top answer from a top bloke. Keep doing what you do my friend. 👍

chris we love your channel so that bloke that says there is nothing for him sounds like a troll,every thing you do is educational keep it up and ignore the moaners

Chris rise above the armchair experts your subs are going through the roof because the channel is great with great content don't change anything we all love it cheers mate

Chris don't worry about the now it alls I can't see them doing it love your videos thanks

Keep these videos coming in a hgv mechanic to trade and every day is a school day I’ve learnt little tricks from watching your vids

Good honest graft, keep it up mate. Great content.

I no nothing about cars, trucks ,mechanics, but watch Chris because he’s so funny it’s the best thing on RU-vid keep up the great work Chris .

Good explanation Chris.

Thoroughly enjoy the content mate. I'm a qualified maintenance fitter! dreaming of a job in the HGV game! Keep up the content mate! Jamie x

Hi Chris, for someone starting out in the trade you videos are brilliant. Carry on the way you are Anyone not happy sod em Regards Frank

Interesting to see more modern vehicles than I worked on 150 years ago.

Needed a 41mm deep impact socket to do a ball joint. Ordered it up, used it, went to put it in my socket drawer, right next to the 41mm socket I already had .

Watching from Canada Chris, love all your videos, keep up the great work

Great Video Chris, just keep doing what your doing. Very entertaining to watch.

It's not a mid life crisis unless you buy a boat or sports car ! (I'm looking for a boat), also can you teach us some tricks or hacks for easier welding ? Love watching your vids to see the way you do things, I used to be an agri mechanic. If only you and RU-vid were around back then ! Keep em coming bud.

Spot on pal your channel bloody brilliant

I could watch you reading the ingredients from a bottle of water Absolute legend mate

You'll be at 10k subs in a couple weeks at this rate. Rightly so. Channels a breath of fresh air. Get your mate to get the merch on the go and earn yourself so extra pennies.

Great video Chris, ROR stands for Rubery Owen Rockwell, Rubery Owen is about 130 years old, started in Darlaston, Staffordshire. Factory that welded the spindles to the axles and built the axles was in Wrexham, now moved to Brazil; if anyone is interested. Nice job.

hiua chris. to pack bearings i used an air greaser wit a volvo door hinge greaser end on it. one psst between each roller fully greased bearing, half the time. sorted man.

Well done Chris you are the business

Halfway through before I realised you were taking a disc hub off and not a shoe hub....im assuming that I need to find a different video. Cheers for being an easy watch though. 🙂👍

chris you are a top lad well done

Legend mate ! Grate videos grate content from a fellow professional struggler !!

This channels blowing up, class , seems every day or 2 there's another thousand subs, fair play to you, keep it up

Well said Chris, first of all you are the only one here that does what it says on the tin! If they don't like it ,they can jog on...I respect what you do. Am just gutted am not in your trade. But I have got and acquired 19 years experience in building and construction . I,ll be more than happy to help out if needed .I have been struggling myself in my trade since recession 2009. I have been grafting then just to make ends meet. I completely understand you chris.

I want to see a vid on “packing away” in your clean tidy van 😂😂😂

Good job Lad.

Fitters at the bus company use a plastic Cataloy spatula for the grease Chris.

Great video as usual mate, hope your financial situation gets sorted quick. Why is it hard working people struggle in life and lazy ones sail through life with no cares, keep up the good work mate 👍

There’s ya new T-Shirt Merch - Scroll the F up… 😏😁

Keep doing what your doing your a legend

Lovely little rant there Chris and well said mate big 👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍 from me

Great content Chris , I really enjoy your videos,

Interesting video Chris . Keep them coming 👍

Great video Chris

Stick welder works well for outer race removal especially Where there are no cutaways.

I find your videos are brilliant Chris keep them coming 🚚🚜🚛⭐️⭐️⭐️⭐️⭐️👍👍👍👍👏👏👏👏👏👏👏

great old tricks used to centre dab the bearings in 1976 nothing changes ,done a set of brakes and it went out to work then in the middle of the night the hub nuts worked loose and lost drive ...lol

good old ROR LM axle. great to work on.

Well said chris !! Woop Woop 30k subs 🎉🎉 much love from Dorset

Real tube !! Keep up the good work

You make , life easier, TOP MAN 😎

Love the channel keep doing what you’re doing

Chris please put the guard back on your grinder and wear some specs, when grinder discs shatter they are lethal! The 1mm discs in particular are prone to breaking.

These a great vids. Fair play. Serious operator haha

good old rant mate. well said. top video as usual

I love learning

Brilliant two in one night bring on more pal

Love the content 👌

Great tips ☺

Love it… keep it up buddy

right on........love the content and the banter :-)

love ya channel keep up good work m8. Very informative

really enjoying your videos. Keep it up mate

Quality mate!!!

Just subscribed Chris absolutely awesome content 👏 👌 love it 😀